eChapters

Harvesting is a complex operation that can be divided into three major parts, as follows:

Driving and concentrating the fish stock to the catch basin;

Lifting the fish out of the catch basin and placing them on a sorting table;

Sorting the fish and loading them on the transporting vehicle.

Introduction 
Due to the depletion of their raw material supplies, traditional fossil fuel use should be reduced. There is significant hope for biofuel production (Gangl D et al., 2015 ; Seo et al., 2017), and in the past decade, interest in using microalgae has been steadily increasing (Gangl D et al., 2015). The algae group consists of various photosynthetic eukaryotic species that are typically found in both freshwater and marine environments. With an estimated 30,000 to 1 million species, algae range from single-celled cyanobacteria to multicellular forms, each having distinct traits. Microalgae, specifically, grow rapidly and absorb carbon dioxide as they develop (Guiry and M. D., 2012). Many industries have benefited from the utilization of microalgae species for the good of humanity. Food, medications and antibiotics, wastewater treatment, biofuel, biofertilizers, and CO2 fixation are a few of the significant uses for microalgae (Singh et al., 2018 ; Ananthi et al., 2021). Compared to first-generation biofuels, the manufacturing of algae-based biofuel is more advantageous to the environment (Alalwan et al., 2019). Microalgal biofuel production is a greener alternative to first-generation biofuels (Alalwan et al., 2019). It can be cultivated in less ideal locations, such as the ocean or non-arable land, and doesn’t require fertile soil, which helps prevent rivalry with food crops for freshwater and farmland (Winckelmann et al., 2015; Correa et al., 2020). Microalgal production systems can help treat wastewater or convert CO2 into oxygen without interfering with the food supply (Onyeaka et al., 2021; Prasad et al., 2021). Nanotechnology and nanomaterials are becoming increasingly popular across many fields for their useful properties, with global research exploring their role in biodiesel production and processing. To speed up the development of biodiesel production, advanced nanotechnology is being emphasized to achieve higher yields at lower costs. Microalgae are a promising source for biodiesel production, and various nanoparticles can significantly boost the efficiency of harvesting them. Reusing nanomaterials and combining cell harvesting, disruption, and extraction processes also help reduce costs. Moreover, different nanocatalysts can enhance the efficiency of biodiesel conversion (Verma and Kuila, 2020). Currently available techniques for microalgal harvesting include chemical, mechanical, biological, and electrical ones to some extent. Harvesting microalgal biomass is most often done by mechanical means since they are the most dependable (Grima et al., 2003 ; Christenson et al., 2011). But, in order to increase productivity and reduce operating and maintenance expenses, these procedures are frequently followed by biological or chemical flocculation phases. For maximum separation efficiency and minimum cost, two or more of these techniques are frequently used. For instance, processing costs can be significantly decreased by combining centrifugation and flocculation-sedimentation (Schlesinger et al., 2012). Novel approaches like biological treatments have the potential to further lower operating expenses.

4.1 Dry Flower Garden

Contrary to popular assumptions, the area required for producing large quantity of dried flower material need not also be large. However, the garden should be planned so as to harvest dry flowers all year round by planting evergreens, deciduous plants, annuals and perennials. Rows of flowering plants should be planted in the dry flower garden. Herbs are easy to grow, and can be planted in pots and window boxes. They are useful in transforming simple cooking into gourmet dishes, while also lending their delicate scents to a room when dried and for use in wreaths, pot pourri and arrangements. Gardens for dry flower production should include a wide selection of weeds, grains, seed-heads and pods. Flowers such as hydrangeas, zinnias, roses, dahlias and sunflowers and a selection of line flowers such as golden rods, statice, gladiolus, larkspur and delphinium can also be grown as these will provide a greater variety of flowers needed in flower arrangements.

Introduction

Eggplant or aubergine {Solanum melongena L. Solanaceae), is indigenous to a vast area stretching from northeast India and Burma, to Northern Thailand, Laos, Viet nam and Southwest China and wild plants can still be found in these locations. There is a wealth of eggplant common names. Eggplant is a major fruit vegetable with world production exceeding 31 million tonnes (Mt). Leading producers are China (17 Mt) and India (8 Mt), Egypt (1 Mt), Turkey (0.9 Mt), Japan and Italy (0.4 Mt). Eggplant is particularly favoured in Asia where it has been cultivated for millennia, and in India it is considered King of Vegetables. Brinjal, native to India, shares 31 % area (5.1 × 10⁵ ha) and 28% production (82 × 10⁵ t) of the world (Anon., 2003). It contributes 9% of the total vegetable production in the country. Three states/provinces viz. Orissa (1.41 × 10⁵ ha), West Bengal (1.29 × 10⁵ ha) and Bihar (0.72 × 10⁵ ha) cover 67% of total brinjal area in India (Anon., 2006). It is widely adaptive and highly productive (17.78 t/ha) crop of tropical and sub-tropical regions. It is comparable with tomato for nutritional values like vitamin C, iron and fiber, thereby, can play an important role in combating malnutrition in under-nourished regions (Singh et al., 2001). However, genetic improvement, production technology, post harvest handling and plant protection measures are important for increasing the production, productivity and consumption of brinjal.

Substantial onion losses occur after harvest through sprouting, rotting, physiological weight reduction and quality deterioration. Proper harvest timing, careful handling and effective curing are therefore essential for maintaining marketability and extending storage life. This chapter explains maturity indices, including appropriate levels of top fall, and compares field curing with forced-air methods. It examines topping, grading, packaging, transportation, storage temperature, relative humidity, ventilation and disease management. Physiological and biochemical changes occurring during storage are also considered. An integrated post-harvest approach combining correct maturity assessment, suitable harvesting, complete curing, careful handling, controlled storage and regular quality monitoring can considerably reduce losses and improve year-round onion availability.

It is not just enough to produce fruit and ornamental plants in a nursery, but it is also very much important to consider the post production management practices like harvesting, packing, storage and marketing of nursery plants for successful industry.

Harvesting: Harvesting is one of the important factors considered, when nurserymen are producing seeds, bulbs, etc. The seeds or bulbs should be harvested at proper maturity stages depending on the plant species.

Seeds are generally harvested when they are fully ripe. In some of the annuals and perennials, seeds are likely to fall from the plant at ripening either due to bursting of the fruit/ capsule or due to wind. (calendula, balsam). In such cases, it is better to cover with muslin cloth or butter paper bags. Bulbs, corms and tubers are carefully dug out without injury, along with cormels or bulblets.

Packaging: The package should provide a convenient mode used for marketing and distribution. It protects the contents from undue damage during distribution. It is important that appropriate packaging should be used to preserve quality of material along with maximum survival during transit. Proper packaging of plant material (fruit plants/ ornamental plants/seeds) ensures quality during storage, distribution and transport.

Viable cropping systems involving new rewarding crops infuse new opportunities and challenges as well as demonstrate the potential for land productivity with higher growth and economic achievements.  As far as agricultural production is concerned Haryana is a surplus agricultural state and is one of the largest food supplier to the national kitty. The cropping patterns have undergone drastic changes over the years with a major shift in favour of cereals like paddy and wheat. Consequently, the existing cropping system viz. paddy-wheat, has started showing its adverse effect on soil health and consequent decline in crop productivity. Diversification of existing system by involving pulses, vegetable, fodder and other high value crops, is considered to be the potential alternative to address many present day problems. For example, under assured irrigation, pearlmillet-potato-moongbean gave almost 65% higher yield than the existing cotton-wheat cropping system because the leguminous crop in summer gave higher economic yield and benefit to pearlmillet crop. The package of practices with focus on pulses crops grown in Haryana state are discussed here.

Principles of Incubation

Incubation is a process by which the embryo within egg develops into a fully formed chick capable of breaking free from the shell. Basically, when a hen incubates an egg, it means she is on the egg in order to keep it warm for a certain period of time, 21 days for chicken, until the chick embryo has fully formed and is ready to hatch. The incubation period in other species is given in Table 41. The following factors affect the incubation on egg

1. Temperature

Incubator temperature should be maintained between 99 and 100 oF. The acceptable range is 97 to 102 ^oF. Overheating is more critical than under heating. An incubator should be operated in a location free from drafts and direct sunlight. Temperature is probably the most important single factor influencing the development of the embryo. A higher temperature will advance the hatch and a lower temperature will delay hatch. Younger embryos are especially susceptible to high temperatures because the upper lethal limit is very close to the optimum incubating temperature. High temperature will cause the embryonic membranes to dry out too soon. Chicks that hatch may have an unsteady gait.

Availability of quality fish seed is the critical and basic input for successful fish culture operations. Till the sixties, a major part of the seed required for culture was being collected from the riverine sources, which had several disadvantages. Indian major carps viz. Catla, Rohu & Mrigal and Chinese carps viz. Silver carp & Grass carp mature in the pond but do not spawn or lay eggs in standing waters. Usually they breed or spawn naturally in flowing rivers during monsoon months. In artificial breeding, certain inducing agent (hormone) is injected to fish for successful spawning.

In India, the first successful induced breeding of carp was achieved through use of pituitary hormone in 1957. Increased seed production of fish today is a direct result of improved technologies of breeding, hatching and rearing.

Three decades ago, earthen “pit” hatcheries were used for hatching eggs around bunds. Today large commercial hatcheries exist, where all activities such as raising of brood stock, breeding and fry rearing can be undertaken. This has certainly marked the growth of the industry. Commercial Chinese hatchery facilitates not only large-scale production of fish seeds but also improves the survival percentage of seed.

When green forages are dried to approximately 85% dry matter, they retain a significant portion of their nutrients, including carotene, and are referred to as hay. Compared to straw, hay is both more nutritious and more palatable. High-quality hay should exhibit a leafy structure, be pliable, possess a green colour and be devoid of mold, weeds and dust, while also emitting a pleasant fragrance. It is essential that the moisture content does not exceed 15% (ideally between 12-14%) to ensure safe storage without the risk of fermentation or combustion.
Objectives of hay production
The primary goal of hay production is to lower the moisture content of green fodder to a level that effectively inhibits the activity of both plant and microbial enzymes.
Benefits of hay production
• Hay serves as a nutritious feed source for livestock during periods of scarcity.
• High-quality legume hay can substitute for concentrates, thereby lowering production costs.
• Fodder can be harvested at optimal times to maximize nutrient accumulation in the plants.
Crops suitable for hay production: Fodder crops with soft and flexible stems are ideal for hay production. Green oats are considered the best option for this purpose. Other suitable crops include green berseem, lucerne, cowpea, stylo, and various natural grasses, provided that leaf shattering is minimized. Both annual and perennial grasses, such as anjan, doob, rhodes, and sudan grasses, are also appropriate for hay making. However, cultivated cereal fodders like maize, sorghum and bajra are better suited for silage production than for hay. If using thick-stemmed crops for hay, it is necessary to chop or crush them into smaller pieces.

Feeding of green and succulent fodder is of utmost importance to farm animals. Grazing fresh forage year round at the optimal stage of maturity would supply the highest quality and most palatable form of feed in any livestock operation. In most part of the world, green fodder is limited to a particular season only. Because of fluctuations in seasonal growth and plant maturity, excessive biomass in the spring, it is necessary to harvest and store forages to maximize both quality and productivity. One of the important form of conservation practiced on a wide scale is hay making. Hay making is an art in which the fodder is kept for future use in lean period. Since it contains large quantity of moisture it is to be dried properly to increase its keeping quality without reducing its nutritive value. The objective of hay making is to achieve a rapid moisture loss after cutting so that the forage can be romoved from the field with minimum losses from weathering and microbial degradation (Bareebam, 1992).

Storage of hay at higher moisture contents may lead to some heating due to the activity of aerobic micro-organisms and possibly some plant respiration. The warm, moist conditions in hay will provide the ideal environment for growth of spoilage bacteria, e.g. Bacilli and yeasts, moulds and fungi. These organisms utilize the energy and protein of the hay and can lead to a substantial increase in their respective populations. Their action leads to the following reaction:- 

Hay (plant sugars) + oxygen ® Carbon dioxide + water + heat
 
The resultant heating causes a reaction between the carbohydrates and proteins rendering both less digestible as temperatures continue to increase. The best opportunity to reduce hay-harvesting losses is by shortening curing time. A combination of mechanical conditioning, chemical conditioning and high-moisture baling help accomplish this goal (Collins, 1988; Mahanna, 1994).

Hay quality really means feed value. The ultimate test of hay quality is animal performance. Quality can be considered satisfactory when animals consuming the hay give the desired performance.
 
Characteristics of Good Quality Hay

    1.    Hay should be nutritious therefore prepared form plants cut at an appropriate stage of maturity when it has the maximum nutrients.
 
    2.    Good hay should be leafy. The leaves are generally richer in proteins, minerals and vitamins then other parts of the plant.

    3.    Hay should be green in colour. The green colour indicates the amount of carotene which is precursor of vitamin A. The green colour should be preserved by minimizing the bleaching, leaching arid fermentation losses.

Haylage or baleage or round bale silage, is a somewhat newer method of preserving forage. Haylage is simply forage that is baled at higher moisture content than dry hay and then stored in a sealed plastic wrap. Because of the high moisture level and air-tight environment, the forage ferments and is preserved by acid production during fermentation. The higher pH values associated with baleage are related to a slower fermentation process. During the respiration stage of the ensiling process the oxygen that is trapped in storage is rapidly consumed by aerobic bacteria. Anaerobic bacteria, which survive in the absence of oxygen, begin to grow and multiply in the fermentation stage and convert the plant sugars into organic acids- mainly lactic acid and acetic acid. With production of acids, the pH of the silage is reduced from an original level of 7.0 to a final ideal pH of 4–5. Typical large bale haylage has a pH of 4.5–5.5. Fermentation ceases when bacteria growth is stopped by the accumulation of acids. The haylage will then remain at a stable pH with no bacterial growth and can be preserved for a long time, providing there is no exposure to air. Harvesting forages with a long fiber usually results in a slow release of the plant nutrients necessary for the growth of acid producing bacteria. This generally results in less fermentation in the baleage than in chopped silage.

The food is considered as one of the essential for the maintenance of life. Manufacturing of the food product is not enough form the food industry. It is necessary that the food available is safe, hygienic; wholesomeness and its quality must be assured. The food industry is an important segment of industries in India and has its own peculiarities unlike other industries. Food processing industry has been recognized by government as a major sector of growth. It must be free from harmful additives, microbes and remain so for a period, it is intended to be consumed. Therefore, the methods employed in quality and food safety assurance programme within the food industry will vary considerably in accuracy and sophistication according to the type of process and size and nature of resources available. Since the international market has become demanding in terms of quality, safety and delivery, installation of Hazard Analysis Critical Control Point (HACCP) in food industry would provide a competitive edge to food supplies in the international market. Food control refers to all activities carried out to ensure the quality, safety and honest presentation of the food at all stages from primary production through processing and storage, to marketing and consumption. The term has been used to describe a total national effort involving an integrated approach between government and all segment and sectors of the food industry. Food control is linked to improvement in the health of the population, potential of a country’s economic development and reduction of spoilage and food losses.

A wide variety of quality determinants is employed, including size, colour, maturity and extent of blemishes. Quality is a measure of the degree of excellence or degree of acceptability by the consumer. The marketing of fresh fruit and vegetables is aimed eventually ay appealing to the consumer for whom tradition plays a major role in determining the acceptability of a food item. The eating habits of people are conservative. The increase of direct market from producer to supermarket chains is leading to the imposition of standards to predetermined specification by the supermarkets. Important factors in quality for the consumers are: appearance, including size, colour, shape, condition and absence of defects, texture, flavour and nutritional value. Quality is the ultimate criterion of the desirability of any food product to the consumer. The overall quality of food depends on the nutritional and other hidden attributes. Quality of foods can be defined as the ‘composite’ of the ‘characteristics’ that differentiate individual units of a product and have significance in determining the degree of acceptability of that unit by the buyer.

There are specific hazards associated with equipment, operation or a particular section. Such possible hazards and their preventive measures are discussed below.
I. Milk Reception Dock
    1.    Where the top of a vat, into which a 40 litre can of milk is to be dumped, is higher than the milk can, two men should lift and empty the can.
    2.    Where steam jet method of can washing is used, to avoid burning, employees would be furnished with protective equipment, including rubber boots and long aprons
    3.    Cans should be stacked in areas away from frequently used passage ways
    4.    Cans should not be stacked so high that they may fall and injure someone

Food packaging serves to protect products throughout their journey from production to consumption. However, packaging is often exposed to a variety of hazards during transportation and storage that can compromise its effectiveness and, ultimately, the quality and safety of the food inside. Understanding these hazards is essential for designing packaging solutions that can withstand the physical, environmental, and atmospheric challenges encountered along the supply chain. This chapter examines the types of hazards that affect food packaging during transportation and storage, focusing on the ways in which these factors impact packaging integrity, food quality, and consumer safety. By exploring mechanical hazards, environmental influences, and atmospheric interactions, this chapter provides insights into the crucial role that resilient packaging plays in safeguarding food from production to point-of-sale.

Introduction

Food Safety is the assurance that food is acceptable for human consumption according to its intended use. The slogan of the World Food Safety Day 2019 “If it’s not safe - it’s not food!” portray, unsafe food is a threat to mankind. Ensuring food safety to protect public health and promote economic development is of utmost importance and it remains a significant challenge in both developing and developed countries. Food borne diseases remain a real and formidable problem, causing great human sufferings and significant economic losses. According to WHO 2019-20 World Water Day report, one third of the population of developed countries may be affected by food-borne diseases each year and the problem is likely to be even more wide spread in developing countries, where food and water borne diarrhoeal diseases kill an estimated 2.2 million people each year, mostly children. While unacceptable rates of food borne illness still remain, new hazards continue to enter the food supply.

A food safety hazard refers to any agent with the potential to cause adverse health consequences for consumers. It occurs when food is exposed to hazardous agents which result in contamination of food. In other terms it can be defined as anything that could contaminate food or could otherwise violate established food safety program criteria, if left uncontrolled. The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, 1997) defined a hazard as a “biological, chemical, or physical agent that is reasonably likely to cause illness or injury in the absence of its control”.

A hazard may be introduced into the food supply any time during harvesting, formulation and processing, packaging and labelling, transportation, storage, preparation and serving. Food safety hazards are generally categorized into four classes: Physical, chemical, biological and allergens. Food manufacturers can adopt Food Safety Management Systems (FSMS), which include Good Manufacturing Practices (GMP), Good Hygiene Practices (GHP), Hazard Analysis and Critical Control Point (HACCP) and other practices to strictly check the hazards and make the food safe.

Understanding the hazards that contribute to food borne illness and injury is important to determine the necessary steps to prevent or reduce it to an acceptable level or eliminate hazards altogether before food reaches the consumer.

Hazards to mental health include a range of circumstances that may affect a person’s mental health. A complex and multidimensional component of total health, mental health is impacted by biological, psychological, social and environmental variables. Promoting mental wellbeing and avoiding mental health difficulties need an understanding of these risks and taking appropriate action. Global initiatives to promote health continue to overlook mental health. People with mental health disorders frequently face serious human rights abuses, discrimination and stigma, regardless of advancements in certain nations. More than 80% of those with mental health issues, among them with neurological and drug use problems, lack access to any kind of high-quality, reasonably priced mental health treatment. Even though there are many effective, economical treatments for mental health issues, there is still a substantial disparity between those who require care and those who have access to it. Coverage of effective treatments is still incredibly low. Mental health conditions have a significant effect on happiness, productivity and overall health. Mental health issues have significant emotional, societal and financial implications. These consequences include those associated with the criminal justice system, medicinal and educational services, unemployment and sick leave.
Adolescent mental illness is more than just being miserable. It may affect a teen’s life in many ways. Young people who are mentally ill may have difficulties making decisions, managing their health and succeeding in school. One of the main causes of sickness and impairment in young people are mental health issues, which include childhood epilepsy, developmental disabilities, depression, anxiety, mood, attention and behavioural disorders. Neglecting children’s and teenagers’ mental health and psychosocial development has long-term effects that follow them into adulthood and reduce their chances of living happy, satisfying lives.

1. Introduction

Hazel nut also called as European filbert or Bhotia badam (Corylus avellana L.). Apparently the word ‘filbert’ has been derived from Middle English which in turn was a derivation of Philbert - the Saint Philibert, whose feast day in late August coincides with the ripening of the nut. Others believe that the term filbert came from the nut’s long husk being referred to as a full beard in Old English. The name “Hazel” comes from the Anglo-Saxon word for bonnet, “Haesel”; this probably derives from the greek “korys” (as in Corylus), for helmet or hood. The term “filbert” may have derived from “full beard”, descriptive of the long, leafy husk. The scientific name avellana derives from the town of Avella initially and was selected by Linnaeus from Leonhart Fuchs’s De historia stirpium commentarii insignes (1542), where the species was described as “Avellana nux sylvestris” (“wild nut of Avella”). Hazelnut is the 4^th economically important nut crop (748,000 MT/yr) of world after cashew, almond and walnut.