eChapters

The plant roots, soil animals and microorganisms make up soil biological communities, accelerate biochemical activities through intra- and extra-cellular enzymes and interact in such a manner that biogeochemical cycling on this earth continues uninterrupted. Without intermeshing vital processes of soil microflora, microfauna and associated mesofauna, the soil would have become a repository of plant residues and animal remains with no facility for recycling the vital nutrients for plant growth, thus halting the whole process of geo-chemical recycling in nature. Though living component rarely makes up more than 4% of the total soil organic carbon, it plays vital role in geochemical recycling, soil development and ecosystem stability.

1. INTRODUCTION

Flavour is a distinctive property of a substance affecting the gustatory sense. It may be defined as “The sum of those characteristics of any material taken in the mouth, perceived principally by the senses of taste and smell, and interpreted by the brain.” Flavour perception is a complex process which requires the particles to be mixed with saliva and salivary enzymes to promote the release of flavour. Flavour molecules are very diverse in nature. More than 5000 compounds in food have been identified as flavour components which can be detected at very low concentration and are thus, used in products at very low levels. Hexenols and hexenals, characteristic of green taste of fresh fruits and vegetables, can be perceived at a concentration of about 1 part per million (ppm). Naturally occuring flavour compounds are present at a very low concentration ranging from parts per trillions (ppt) to parts per millions (ppm) level. Majority of these compounds are volatile, with boiling points in the range of 20-300 °C. Most of these compounds are lipophilic and possess a great diversity of chemical group and structure with molecular weight ranging between 50-250 g/mol.

Flavour and fragrance compounds are a part of expanding industry with an estimated cost of nearly $27 billion. These comprise of diverse molecules with unique structures and functional groups that contribute to varied aroma and flavour, ranging from floral to fruity notes. The processing operations modify the equilibrium between the different components in raw food that might weaken the original flavour, which require subsequent supplementation. These flavour supplements can be natural or chemically synthesized. Of all the available flavour compounds, around 80% are produced by chemical synthesis whose use is limited due to formation of racemic mixtures and lack of substrate specificity. The growing awareness of consumers towards chemicals supplemented to food has led to the development of the flavouring compounds of biological origin referred to as natural flavours or bioflavours. The first major source of flavour compounds was primarily from plants. Identification of microbes producing vital food flavourants paved the way for alternative low cost, efficient and flexible method for the commercial production of flavour compounds.

5.1. INTRODUCTION

Temperature is the one of the most important environmental element influencing the plant growth and development limiting the productivity and adaptation of crops, especially when it coincides with critical ranges (Chen et al., 1982; Paulsen, 1994). Nearly all commercial crops in the arid and semi-arid tropics often suffer from heat stress. Every plant has an optimal temperature for its normal growth, deviation from this may cause stress to plants. The adverse effects on plant of temperatures higher than the optimal considered as heat stress. Crops are exposed to periods of heat stress during their life-cycle. The optimum temperature for the most species ranges from 25 to 35 0C. Above this value, a decline in the photosynthesis rate is observed (Berry and Bjorkman, 1980; Pimentel, 1998). Even brief periods of heat-shock between temperature ranges of 45-50 0C induce marked change in plant growth processes.

‘Cucurbits’ is a term coined by Liberty Hyde Bailey for cultivated species of the family Cucurbitacae (Robinson and Decker-Walters, 2004). Presently, the term has been used not only for cultivated forms, but also for any species of the family Cucurbitacae. Among vegetables, the cucurbits form one of the largest groups with their wide adaptation from arid climates to the humid tropics.

C - enamel can: The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products (Plate 143).

CA storage: Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables (Plate 144).

CAC: It stands for Codex Alimentarious commission (1962). It is a joint commission of FAO and WHO, comprising of 146 member countries. It ensures consumer food safety, establish fair practices in food trade and promote the development of international food standards. CAC make standards for food additives, veterinary drugs, pesticide residue and other miscellaneous substances that affect consumer safety. These are published in Codex Alimentarius.

‘Cucurbits’ is a term coined by Liberty Hyde Bailey for cultivated species of the family Cucurbitacae (Robinson and Decker-Walters, 2004). Presently, the term has been used not only for cultivated forms, but also for any species of the family Cucurbitacae. Among vegetables, the cucurbits form one of the largest groups with their wide adaptation from arid climates to the humid tropics. The family consists of about 118 genera and 825 species. In Asia, about 23 edible major and minor cucurbits are grown as vegetable. They are grown in summer and rainy seasons in India and even in winter in some parts of southern and western India as both annual and perennial crops. 

Pulses are high in protein, fibre, and various vitamins, provide amino acids, and are hearty crops. They are most popular in developing countries, but are increasingly becoming recognized as an excellent part of a healthy diet throughout the world. Pulse crops are one of the most sustainable crops a farmer can grow. It takes just 163 litres of water to produce 0.45 kg (1 pound) of pulses, compared with 818 litres for soybeans. They also contribute to soil fertility by fixing nitrogen in the soil.

M    :    Milli (10^-3l).

M    :    Molar (mol/L).

M    :    Microorganisms - small organisms which require a microscope to be seen. M represents the SS in the mixed liquor and is part of the F/M ratio. 

Sugarcane, (Saccharum officinarum), perennial grass crop of the family Poaceae, primarily cultivated for its juice from which sugar is processed. Most of the world’s sugarcane is grown in subtropical and tropical areas. The plant is also grown for biofuel production, especially in Brazil, as the canes can be used directly to produce ethyl alcohol (ethanol). The by-products from cane sugar processing, namely the straw and bagasse (cane fibres), can be used to produce cellulosic ethanol, a second-generation biofuel. Other sugarcane products include molasses, rum, and cachaça (a Brazilian alcohol), and the plant itself can be used as thatch and as livestock fodder.

‘Insect pest control’ includes all measures adopted to make the life of insects hard and ultimately to destroy them or to prevent their multiplication and spread. Such measures can be taken up before the appearance of the pests or after occurrence of the pests. To achieve this purpose , it is quite necessary to know the factors, which favor the occurrence of the pests and acquire enough knowledge about the nature and life cycle of the pests, the vulnerable growth stage at which they can be effectively destroyed and appropriate measures of control to destroy them Control measures may be either preventive or direct.

Need for pest control

Control measures for the control of pests have to be taken up as soon as the infestation reaches the economic threshold level. Failure to control the pests at this stage will result in further increase in the pest population and consequent loss in yield and economic loss.

The need for pest control is of two kinds :

i) For yield maximization. The only objective of pest control in this method is to maximize the yield. The cost incurred for pest control is most often more than the income accrued as a result of pest control. The method is adopted only with the object of increasing the yield as much as possible so that the country and the people may be benefited. In this method, pest control operations are taken up before the actual occurrence of the pest or before the pest infestation reaches the economic threshold level. Such treatments taken up to control the pests before their occurrence are known as ‘prophylactic treatments’

1.1 Introduction and Background

In present scenario, the word “extrusion” refers to a process by which dry or semi-moist ingredients with varying in-barrel moisture are forced through varying barrel temperature, screw speed and screw configuration through a die opening of the desired cross section. In other words, extrusion is predominantly a thermo-mechanical processing operation that combines several unit operations, including mixing, coating, kneading, venting, shearing, heating, forming, partial drying or puffing, depending on the material and equipment used.

The origins of extrusion are in the metallurgical industry, where in 1797 Joseph Bramah patented the first extrusion process, wherein a piston driven device was used for making seamless lead pipes. The present understanding of extrusion technology and the developments or improvements in machine design are largely due to research carried out by the plastics industry. In food industry, this technology is in use since 1930 and its popularity is increasing continuously due to its efficiency, continuity and sustainability. In beginning, sausage extruders were developed in the nineteenth century as simple forming machines. One of the original developments which laid the foundation of the food extrusion was the use of pasta press termed as “cold extruder” in mid 1930s. Furthermore, in the late 1930s, General Mills, Incorporation., Minneapolis, MN, USA, first used a single screw extruder in the manufacture of ready-to-eat (RTE) cereals. Later in 1970s, twin screw extruders were used for the manufacture of moist pet-foods. Twin screw extruders were also adapted from polymer industry, as rising food quality and limitations of single screw extruders were demanding a more versatile process for the newer and higher quality products. After 1970s, the extrusion processing with simultaneous use of heat was popularized as a versatile and highly energy efficient with negligible wastage process. In all these years, number of changes has been noted in the extruder design such as changes in screw design, barrel design and also material used for the manufacture of these materials. Barrel liners availability along with already available segmented screws could further add more economics to the process and increased equipment lifetime. For better wearing characteristics, a number of screw elements of different materials are being used in addition to standard nitrided steel for customized processing needs, such as corrosion and wear resistant surface coated steels, stainless steel, satellite welded and bimetallic HIP (Hot Isostatic Press). JBL Feedscrews Limited, a UK based company recently introduced tungsten carbide coated screw in conjunction with a compatible bimetallic barrel. Likewise, a number of options for barrel metallurgy are available to withstand the higher internal pressure and temperature. Barrels lined with hard cobalt based alloy, typically Xaloy, to give abrasion and chemical resistance are also in use, although, the most common material is carbon steel with a nitride interior. Similarly, steam heated or jacketed barrels were used earlier for cooking purpose which gradually replaced by the electric induction heating elements. These HTST cooking extruders are versatile, highly productive and energy efficient processing machines. They can use a wide variety of raw materials and formulations to produce products with increased shelf-life and convenience.

Agricultural practices in India remained virtually unchanged for over 2000 years till 1950-60. With technological advancement in medicine and improvement in health care services, population in India substantially increased in the post independence period. The result was that there was acute shortage of food during 1960s and India had to import massive quantities of wheat from USA to avert famine. Most of these food shipments were in the form of aid. It was then that Government of India realised the gravity of situation and invested heavily in agricultural research. Fortunately, during this period food research laboratories in the West developed hybrid varieties of seeds to suit various types of soil and climatic conditions. At the same time new types of fertilizers and pesticides were introduced which showed dramatic increase in the yield. The agricultural research laboratories in India were able to build on this research and provided extension services to adopt new agricultural techniques to farms in India. This led to dramatic improvement in agricultural production which was hailed as “Green Revolution”. Within two decades a country perennially deficient in food and subject to cyclic famines became a food surplus country in spite of the fact that there was a continuous rise in population which doubled in 30 years after independence. This trend continued into 1980’s when Government built huge buffer stocks of wheat and rice to meet the needs during lean production years.

However the momentum of Green Revolution could not be maintained and certain disturbing trends were noticed in 1990s. The growth rate in productivity declined from 2.99 per cent per annum to 1.21 per cent This was not because we had come to a technical plateau our yields of various products are still quite low as compared to those achieved by developed countries and even some of the developing countries.

1. INTRODUCTION

This chapter looks at ICTs in Sub-Saharan Africa (SSA), with a focus on several selected countries in the region. Exciting and positive developments are happening throughout SSA Africa in ICTs. For instance, in spite of extensive poverty, SSA has had the fastest growing mobile market in the world over the last five years. The mobile telephone in the region has morphed to serve uniquely African development needs, including those in rural areas. It is being used for market information, extension messages and as virtual currency. In Kenya and Uganda, mobile phone services provide cheap messages about crop price information via text messaging. In Tanzania, there are ‘market spies’, farmers who visit local markets and remain in contact with the village using mobile phones to negotiate for better prices.

In spite of the growing use of mobile telephony and other ICTs, Africa has lagged behind in harnessing ICT potential for extension and other rural development issues in comparison to countries such as China, India, and Chile. Sub-Saharan Africa has the lowest teledensity in the world (Bertolini, 2006a). Many challenges exist to ICT use in SSA, and there are concerns that many rural African communities are being further left behind through the ‘digital divide’.

• Definition of Bioinformatics
• History of Bioinformatics 
• Structural Bioinformatics
• New Branch of Bioinformatics 
• Bioinformatics - Application in Agriculture
• Analyzing Protein Sequence
• Pairwise Alignment
• Multiple Alignment
• Blast - A Sequence Alignment Tool
• EMBL
• SWISS–PROT
• Rice Genome Project
• Software for Bio-informatics
• Major Categories of Bioinformatics Software
• Internet Sites For Bioinformatics

Meteorology is defined as the branch of science concerned with the processes and phenomena of the atmosphere. It is also defined as the climate and weather of a region. The word meteorology is derived from two Greek words: Meteor and logus. Meteor means event occurring above the earth surface and logus means to study. Meteorology is science deals with the physics, chemistry and dynamics of atmosphere and also their direct and indirect effects upon the earth surface, oceans and thereby life in general.

Climatology: Climatology is scientifically defined as weather conditions averaged over a period of time. Different regions of the world have different characteristic climates which determine the crops of any region. Climatology is derived from Greek word ‘klima’ – place/zone or slope of the earth and logs is study. It discovers, describes and interprets the climate on the basis of causes and long term effects on variation in regional and global climate. Climatology is the science which studies average condition of weather or the state behavior of the atmosphere over a place or region for a long period of time.

Agrometeorology: Agrometeorology is the study of weather and use of weather and climate information to enhance crop production. Agrometeorology is defined as the branch of meteorology that deals with relationship between weather and climate on crop, livestock production and soil management.

Most of us consider weeds to be the troublesome, competitive, aggressive, undesirable, unsightly elements of the plant world. We hate weeds since desirable plants cultivated by us are deprived of food, water, sunlight and space by these plants. They can easily colonize an area and thrive even under non-ideal conditions of growth and may affect human welfare adversely. It is perhaps due to this that the saying, when weeds win all the people lose, has come into existence.

The terminology committee of the Weed Society of America gives the simple definition of weed as a plant growing where it is not desired. King (1974) in his book Weeds of the World observed that ‘‘a plant classed as a weed in one region where it has few, if any, uses may when growing in another region, possess some very valuable uses, or in few cases may actually be cultivated’’. For instance, Bermuda grass (Cynodon dactylon) is a highly troublesome weed in crop fields, but in village pastures, it is a much sought for forage grass. Quack grass (Agropyron repens) is a very good soil binding grass on erodable non-crop lands but it is a serious weed when it infests crop fields and orchards. Campbell (1923) considered weeds as ‘honest, independent competitors for food materials in the struggle for existence’. He pointed out that the term, weed has developed in the minds of people not according to specific qualities or by a definite concept in the mind of man, but by human caprice, e.g., corn is a cultivated crop, hence, desirable plant in a corn field. However, if a corn plant grows in a Soya bean field, it is considered a weed by the Soyabean farmer. Sometimes, two persons may differ about the weedy nature of a plant at the same place and time, e.g., water hyacinth (Eichhornia crassipes) is a weed for fisherman but it is a plant of aesthetic value for a city dweller.

Thus, a corollary to the above definitions of weed is that weeds are those plants, which grow out of their place, interfere with the utilization of natural resources, prolific, persistent, resistant, competitive, harmful and even poisonous in nature and can grow under adverse conditions.

Pacemaker: A region from which waves of contraction in the heartbeat cycle are propagated.

Paedogenesis: Reproduction by the juvenile form; the production of eggs or young by an immature or larval stage of an animal; reproduction by larviform individuals.

Paeudotrachea: A ridged groove on the ventral surface of the labellum of some higher Diptera, used to take up liquid food.

Page precedence: The principle that when two or more conflicting homonyms or synonyms are published in the same work (or portion of a work) and, as a consequence, are of the same date, the names shall have priority according to the sequence in which they first appear in the work (or portion) concerned.

Paint gun: Type of small, hand-carried, air-blast machine.

Pair-wise coevolution: see Specific coevolution.

Where is the Central Institute for Medicinal & Aromatic Plants situated at?

A. Srinagar        B. Bengaluru

C. Anand           D. Lucknow