eChapters

Some basic informations about genera of Family Pythiaceae, Peronosporaceae and Albuginaceae;

Pythiaceae

Indeterminate (grows continuously) sporangiophores, have sporangia that are borne variously, but not in chains, on somatic hyphae or on sporangiophores. This family includes the genera Pythium and Phytophthora.

Peronosporaceae

Determinate sporangiophores, form sporangia on well-defined, branched sporangiophores of determinate growth. There are seven genera in the family including Basidiophora, Bremia, Bremiella, Peronospora, Plasmopara, Pseudoperonospora and Sclerospora.

Albuginaceae

Club shaped sporangiophores, catenate sporangia, produces chains of sporangia on club-shaped sporangiophores of indeterminate growth. The Albuginaceae contains a single genus Albugo.

Cells Contain 4 Major Types of Giant Molecules (Macromolecules, Polymers)

Carbohydrates

Lipids

Proteins

Nucleic Acids

BIOLOGICAL POLYMERS ARE MADE FROM ABOUT 60 SMALL BUILDING BLOCKS

Cells contain thousands of types of giant molecules (macromolecules, polymers)

Polymers are macromolecules made from a single building block molecule Most of the macromolecules are made from about 60 types of small building block molecules

Most macromolecules are linear: building blocks linked head to tail- a few have branches (some polysaccharides)

This is what you would get if you heated cells in hydrochloric acid overnight at 110 degrees C:

Pack inspection: It is similar to continuous inspection except that here inspector(s) may make in-process checks during different processing operations under contract but not required to be present all the times in the plant during operation.

Package: The package means a pre packed box, tin, barrel, pouch or can etc in which food article is packed.

Package store: A store that sells bottled or canned alcoholic beverages for consumption off the premises.

Packaging: Packaging is an industrial and marketing technique for containing, protecting, identifying and facilitating the sale and distribution of agricultural, industrial and consumer products (Plate 467). Packaging is defined as an enclosure of products, items or package in a wrapped pouch, bags, box, cup, bottle or any container form to perform one or more of the functions as containment, protection and preservation, communication and utility or performance. Technically, packaging is a system or method by which a product from the manufacturing point to the consumer level reaches in a safe and sound condition at an affordable cost. The primary purpose of the packaging is to protect the food product, to keep it in good condition and to preserve the flavour until it reaches the consumer. It is therefore, very essential that a suitable form of the packaging is chosen for a finished product. Packaging is an art, which determines the buying decision of a consumer. or Wrapping / placement of objects in paper / other packaging materials, keeping in box, etc is known as packaging which has two main functions, to assemble the produce / objects in convenient units for handling and to protect them during transporting, marketing and storage which results in extended shelf life of the produce. “Packaging” play a very important role not only in ensuring safety of the product during transportation, storage and distribution and in conveying information about the pack contents to the consumers, but also ensuring desired sensory characteristics and micro biological soundless till consumed.

Saccharification: The process of breaking a complex carbohydrate (starch or cellulose) into its monosaccharide components is called saccharification.

Saccharimeter: A device (polarimeter) used for measuring the amount of sugar in a solution is called saccharimeter. It is also known as saccharometer. It is a hydrometer with a special scale.

Saccharin: A crystalline compound C7 H5 NO3 S that is unrelated to the carbohydrates, is several hundred times sweeter than sucrose, and is used as a calorie free sweetener.

Saccharomyces: It is one of the genus (Saccharomyces) of the family Saccharomycetaceae and is usually unicellular yeasts (brewer’s yeast) that are distinguished by their sparse or absent mycelium and reproduced asexually by budding.

Safe food: Food that provide maximum nutrition and quality while revealing a minimal hazard to public health and they assume any risk present to be minimal.

6.1 Introduction

Plant breeding is the indispensible component of elevating production and productivity of spices by evolving high yielding and/or with good quality type. Thereby, the practice of identification and selection of desirable traits and introgression of those characters in a single plant is being done since the beginning of organized agricultural activities by humankind. The act of plant breeding was reshaped and got a momentum with a scientific basis after the discovery and rather rediscovery of Mendel’s laws. Worldwide, humankind could enjoy the direct benefits of methodical plant breeding during green revolution. Manipulation of genetic architecture for creating variation in the population and successive selection is the basic of all kinds of crop breeding. But the process of creation of variability and selection differs from crop to crop depending on their mode of reproduction. It is comparatively easier to get a new homogeneous population in self pollinating plants. Therefore, segregating generations are handled differently in these two categories of self and cross pollinated crops.

Fresh vegetables are essential part of a healthy diet as it is an important source of vitamins, minerals and fibers. The nutritional content of vegetables varies considerably, though generally they contain little protein, fat and varying proportions of vitamins such as Vitamin A, Vitamin K and Vitamin B6, pro- vitamins, dietary minerals and carbohydrates (Woodruff, 1995; Whitaker, 2001).

7.1 Plant Tissue Culture

Spices have great socio-economic impact in moden food habit of human but loss of resources day by day due to various reasons (industrialization, high population pressure) make the access of these valuable spices limited to people. Low production is general phenomena of common spices due to lack of high yielding varieties. Hence there is a need to improve the propagation method to meet the gap between demand and supply. Conventional vegatative propagation method is common approach for propagation but low multiplication rate, seasonal dependency and susceptible to abiotic stresses and diseases are major problems to achieve the optimum productivity. To overcome these drawbacks scientists have chosen the plant tissue culture technique (a modern approach of biotechnology which deals with the propagation the valuable/endangered plants under laboratory condition). Details about this technique and its role on spices are given below.

Plant Tissue Culture: Basic Components and Objectives

The technique of growing of a whole plant cell, tissue or organ under an aseptic condition in suitable synthetic medium is termed as plant tissue culture (Thorpe, 2007). De-differentiation and re-differentiation are two essential fundamental processes which help in the physio-morphological development of the plant.

Abstract: Orchids, one of the largest commodities in international cut flowers and ornamental plant market, in which genera Cymbidium, Dendrobium, Phalaenopsis, and Vanda are most traded. Orchids occupy prime position among ornamental plants of the modern world. Both warm and cool temperature cultivars are grown in vitro germinated seeds or clones. Breeders have created polyploid cultivars (amphidiploids, triploids) which have greater flower number/raceme, large flowers and other valuable traits. Numerous genes have been identified in the genus with some sequenced genes being used to create genetic transformants. Genome breeding and wide crosses are routinely used to create new genetic variability. Future crop ideotypes are proposed to continue transformation of this crop during the next millennium.

1.1. Characteristics and categories
                
1.2. Litter
    Patterns of accumulation
    Successional trends
    Seasonal variations
    Fluctuations in accumulation

1.3. Dissolved organic matter
    Sources of DOM
    Fluxes of DOM

1.4. Woody detritus

1.5. Soil organic matter

The classification of pyrolysis processes plays a crucial role in understanding and categorizing the various methods used for thermal decomposition of biomass, waste materials, and carbonaceous feedstocks. This chapter provides an in-depth overview of the classification schemes employed in the field of pyrolysis. It discusses the different factors considered for classification, including temperature, heating rate, feedstock, reactor configuration, and operating conditions. Understanding these classifications is essential for selecting the appropriate pyrolysis process based on specific objectives, feedstock availability, and desired product yields.

Tuberculosis

Tuberculosis is a chronic bacterial disease of cattle, buffaloes, sheep, goat and pigs caused by Mycobacterium sp. and characterized by presence of tubercle nodules in lungs, spleen and lymph nodes (Fig.2.1).

Etiology

• Mycobacterium tuberculosis

• M. bovis

Pathogenesis

Disease spreads through contact with infected animals or their discharges or morbid tissues. The infected animals release the organisms through sputum at coughing and contact animals get infection through droplet inhalation.Besides sputum, faeces, urine, vaginal discharges, semen, milk, lymph and wound discharges may act source of infection. It is also transmitted through contaminated instruments, utensils and beddings. After entry through inhalation or ingestion, bacilli localizes at the point of entry and produce typical tubercle in associated lymph nodes. Mostly pharyngeal and mesenteric lymph nodes are affected. From lymph nodes, infection may extend across body cavities, blood vessels and lymph vessels. The inhaled organism enter in the bronchial tree after lodging in bronchi a tissue reaction takes place. Neutrophilic infiltration is there and when neutrophils are necrosed, macrophages come to destroy the organism but they fail then many macrophages becomes elongated to form epithelioid cells, the hall mark of granulomatous inflammation. Some macrophages are joint together to form giant cells to destroy the acid fast bacilli. As a consequence of this some bacilli are phagocytosed and are destroyed. A zone of lymphocytes, macrophages, epithelioid cells, giant cells and fibrous connective tissues are formed around the central necrosed area.

7.1 General

Science and technology have been advancing rapidly, but unfortunately, their impact has been largely negative. Pollution is not the only issue we face today, but also the depletion of fossil fuels, climate change, and excessive land degradation. The persistent presence of heavy metals in soil poses a significant threat to our planet. Many efforts have been made to remediate soils contaminated with toxic chemicals.

There are several issues that need urgent attention at the moment, and a solution is necessary to tackle them all at once. Biochar is a great option because of its numerous benefits, such as a large surface area, high porosity, high carbon sequestration rate, excess nutrients, and potential to produce syngas and bio oil. By using biochar, we can reduce the bioavailability of pollutants in soil, combat climate change by sequestering carbon, and reduce the use of fossil fuels by producing syngas and bio-oil. Additionally, biochar improves soil health, which can contribute to food security.

Trypanosomosis

Trypanosomosis is an infectious disease of animals caused by protozoan parasite and characterized by emaciation, enlargement of spleen and lymph nodes, petechiae on serous membranes, ulceration on tongue and gastric mucosa and gelatinous exudate in subcutaneous region.

Etiology

• Trypanosoma evansi

Pathogenesis

The disease is mainly transmitted through bite of flies like Tabanus, Stomoxys, Haematopota etc. The carrier animals remain as potential source of infection. The pathogenesis of disease is not completely known. After entering in mammalian host, trypanosomes multiply in blood stream by binary fission leading to parasitaenia. The parasites has variable surface glycoproteins which cause continuous exposure of immune system leading to hyperplasia of spleen and lymph nodes. In chronic cases, due to formation of antigen- antibody complexes glomerulonephritis and vasculitis is seen.

Introduction

Flax (Linum usitatissimum L.), also known as common flax or linseed, is a member of the genus Linum in the family Linaceae. Linseed is an annual oil crop that is grown either for its fibre (fibre flax) or for its oil. The area under annual cultivation is 3 million hectares, accounting for 1% of the total world production of plant oil. The five major flax-producing countries are Canada, China, India, the United States, and the European Union.Canada with 614,000 metric tonnes of flaxseed produced in the year 2013-2014, is the world’s largest producer of flax and accounts for nearly 80% of the global trade in flaxseed (Oomah 2001; Bhatty, 1995)

Flaxseed, of Mesopotamic origin, has been cultivated in Mediterranean region and India since 5000 BC, being used principally for the fabrication of cloths and papers (Soni, et al., 2016).

With the adoption of cotton as a fibre crop for cloth preparation, fibre flax production declined and the major use of flax was switched from stem fibre to seed oil. It is a food and fibre crop cultivated in cooler regions of the world. Textiles made from flax are known in the Western countries as linen, and traditionally used for bed sheets, underclothes, and table linen. Its oil is known as linseed oil. In addition to referring to the plant itself, the word “flax” may refer to the unspun fibres of the flax plant. The plant species is known only as a cultivated plant and appears to have been domesticated just once from the wild species Linum bienne, called pale flax. (Allaby et al.,2005). Fibre flax is currently grown in the cool-temperate regions of China, the Russian Federation and Western Europe while linseed cultivars are grown in Canada, India, China, the United States and Argentina (Green et al., 2008).

7.1 Introduction
The preceding chapters have detailed the myriad ways in which meteorological data is collected, from direct in situ observations to various ground-based and space-borne remote sensing platforms. We have also explored the crucial aspects of data formatting, storage, and retrieval, recognizing the immense volume and diversity of atmospheric information. However, the journey from raw measurement to actionable insight is not complete without a critical intermediate step: data quality control (QC) and preprocessing. No observational system, regardless of its sophistication, is entirely free from errors, biases, or inconsistencies. Sensors can drift, communication links can suffer interference, environmental factors can contaminate readings, and automated systems can malfunction. Consequently, raw meteorological data often contains spurious values, missing records, or systematic biases that, if left unaddressed, can severely compromise the accuracy of weather forecasts, the reliability of climate analyses, and the validity of scientific research.
This chapter will delve into the essential processes of quality control, which involves rigorously identifying, flagging, and, where appropriate, correcting or removing erroneous data points. We will explore various automated and manual techniques employed to ensure the integrity and reliability of meteorological observations. Furthermore, we will examine preprocessing steps, which prepare the quality-controlled data for its intended use, including tasks such as unit conversions, interpolation to common grids, and handling of missing values. By understanding the meticulous procedures involved in data
quality control and preprocessing, we gain a profound appreciation for how raw atmospheric signals are transformed into the trustworthy information that underpins all of modern meteorology.

7.1 Meaning of Sampling
    
Before we consider sampling theory, we first define the terms population and sample.
 
The word ‘population’ or ‘universe’ in statistics is used to refer to any collection of individuals or of their attributes or of results of operations which can be numerically specified. For example the assemblage of heights of all the individuals in the population is called a population of heights.  Similarly we may consider the population of weights, wages, yields of grain; prices of wheat, mileages of automobile tyres, etc. a population containing a finite number of individuals or members is called a finite population.  For instance the population f ages of the workers in a factory constitute a finite population of ages. A population with infinite number of members is known as infinite population.  For example the population of pressures of temperatures at various points in the atmosphere is an infinite population. 

We have seen the procedures of testing hypothesis about population parameters in chapter 11. Frequently our interest is to test whether a set of observed values are in agreement with those which would occur if some specified hypothesis were true. The X² statistic provides a measure of agreement between such observed and expected frequencies.

The X² distribution has a number of applications in testing of hypotheses. It is used to test, (1) the independence of attributes, (2) the  goodness of fit, (3) the homogeneity of variances, (4) the homogeneity of correlation coefficients, and (5) the linkage in genetic problems. For applying X² test procedure we have to use only the actual observed frequencies and not the percentages or ratios. Further, the samples should be independent and the observations within a sample should be non-overlapping. The expected frequency in each category should be more than 5. The number of observations should be large, say, more than 50.

10.1 Introduction

In previous lessons we have been dealing with problems connected with variation occurring in any one variable, say the income of a person, the height or weight of an individual, the wage of a worker in a factory, the sales of a shop, demand of a commodity etc.  The values of a single variable were obtained from every member of the population and the different characteristics were described by certain descriptive constants after grouping into frequency distribution.  In this lesson, we shall be dealing with problems wherein there are paired variables and every individual or member of the population exhibits two values, one for each of the variables under consideration.  Example of the two variables which are to be studies together are (i) the income and expenditure of a household, (ii) the price and demand or supply of a commodity, (iii) the height and weight of a student, and (iv) the grain yield and straw yield of paddy, (v) Height of father and height of son, etc.