eChapters

In factorial experiment it may sometime happen that certain factors require bigger plots than other for convenience of operation of the experiment.  For example, in an agricultural experiment involving two factors, say, irrigation and fertilizer, it is organizationally very inconvenient to apply different levels of irrigation to small neighbouring plots.  But there is no such difficulty for the application of different levels of fertilizer. To meet such situations it is desirable to have different sizes of the experimental units in the same experiment.

Agricultural land drainage is adopted for removal of excess surface and subsurface water, either from irrigation or rainfall in order to improve the profitability of land use.  Drainage also plays a role in removal of salts from the root zone. Therefore, land drainage is closely linked to irrigation in arid and semi arid regions. India has a long history of practicing irrigation and drainage in its semi arid irrigated regions. During the ancient times in the Indus Valley dams and drainage system were built for cultivation of different crops. The earlier experience of drainage was more concerned with surface drainage because from time immemorial India has been experiencing floods of varying magnitudes.

Stock or Gillyflower (Matthiola spp.) belongs to family Brassicaceae. It is a hardy annual, biennial and perennial plant, flowering in terminal clusters. Matthiola incana is ornamentally important and grown for various purposes i.e. cut flower, fragrance, pot culture, etc. This species develops a woody base in areas where it grows as a biennial or short-lived perennial, hence the name of stock. Generic name “Matthiola” was given in the honour of “Dr. Pietro Andrea Gregoria Matthiole” (1501-1577), personal physician of Emperor Maximilian of Austria. “Incana” means “hairy or gray-white” in reference to plant leaves. It exists as both single and double forms and is valued for fragrant flowers that can be used as fresh or dried cut flower. They are excellent pot plants for the greenhouse in winter and spring and provide good cut flowers. Flowers are well arranged on a long column and colours are variable from white to rose, crimson, purple, yellow, mauve, pink, etc. The highly fragrant flowers are used as a garnish, especially with sweet deserts. Many old names were given to Matthiola incana including stocks, sea stocks, wallflowers and wall or gillyflowers.

Detailed information on tectonic evolutionary history of the Bay of Bengal is presented followed by elucidation of these characteristics towards tsunamigenesis in this chapter. The Andaman-Nicobar Island Arc (ANIA) is situated on a 1000 km long plate margin and represents a key region in the developing oceanic crustal area of Bay of Bengal. Frequent earthquakes including the tsunamigenic earthquake of 26th December 2004 off the coast of Sunda take place in this region. The subduction of Indian plate under Myanmar-Thailand plate drives formation of chain of Andaman-Nicobar group of Islands. These oceanic crust formation, subduction and arc formation are all seismigenic and generate shallow focus earthquakes in the Bay of Bengal. It is also observed that the seismicity is decreasing as the bathymetry increases towards SW of the Bay of Bengal. Thus, in long term, the slow accumulation of stress as tectonic plates converge may result in many more earthquakes in this region. After a dormancy of over 100 years, the Barren Island volcano renewed its activity following recent earthquakes. The seismic activity along the Andaman-Nicobar trench is continuing with earthquakes of magnitude varying from 4.8 to 7.2 Richter scale. All these observations suggest resurgent and intense tectonic and volcanic activities due to which allied hazards such as tsunami may take place in future.

INTRODUCTION

The evolving Earth, depending on its heat flow pattern in the mantle throughout geological time, had passed through stages, which are diagnosed through characteristic geodynamic signatures. This chapter focuses on a very active region in the crust, namely, the Andaman-Nicobar Island Arc (ANIA) to recognize such signatures and decipher relative safety of surrounding regions including east coast of India. As similar active arc systems such as Sunda Arc & Japan Arc generate volcanic, seismic and tsunami hazards, understanding the ANIA would be of help assess safety of surrounding regions. Abundant geoscientific literature exists on the northern part of the Indian plate, which is undergoing compressive stress since collision between the Indian and Eurasian plates about 55-45my. However, the behavior of remaining part of the Indian plate underneath the Indian Ocean is still sparcely studied. Owing to these reasons, this chapter attempts to fill the gap in our understanding as well as to assess the implications of renewed phases of geohazard occurrences including that of catastrophic earthquake and tsunami of 26^th December 2004.

ABSTRACT

Natural sources have been exploited since the dawn of civilization for the sustenance of mankind. With the passage of time numerous medicines were discovered to treat various maladies utilizing the vast resources of land and the sea, along with the knowledge base support of folklores and folk medicines of different regions of the world, Marine natural products chemistry has gained prominence during the last four and half decades with a view to harnessing the vast potential of the sea particularly in search of drugs by virtue of modern science and technology. Products of marine algae or seaweeds have been used as medicine as well as food and feed and latterly as nutraceuticals. Advanced societies of the world consume seaweed extracts (in the form of alginates, agars and carrageenans) every day in their foods or pharmaceuticals that is complemented by the excellent safety records of commonly ingested species. In this account, I will be focusing on the health care applications of seaweeds.

Health care has two aspects e.g. healing or amelioration of disease conditions with medicines and the other being sustenance of the health system. Seaweeds have been reported to be the source of many bioactive and nutritionally important compounds e.g. antibacterial, antiviral, immunomodulator, cytotoxic, anticancer, neurotoxic, blood anticoagulant, antifertility, vitamins, proteins and minerals. Status of these activities in India and elsewhere in the world has been discussed.

1.1. FYM compost

Decomposed mixture of dung and urine of farm animals along with litter and left over materials from roughages or fodder fed to the cattle.

Farmyard manure contains 0.5% N, 0.2% P₂O₅ and 0.5% K₂O.

Urine contains one per cent nitrogen and 1.35% potassium.

10 to 20 t/ha is applied, but more than 20 t/ha is applied to fodder grasses and vegetables like potato, tomato, sweet potato, carrot, radish, onion etc., respond well to the farmyard manure.

Crops like sugarcane, rice, oranges, banana, mango and coconut respond good to FYM.

Introduction

The ongoing need to create effective agricultural systems that can meet a farmer’s needs is driven by the demand for food, feed, fodder, and natural resources. More than 86 percent of Indian farm families, compromising marginal and small farmers, live in risky, diversified production conditions. There is limited room for horizontal growth of land for agriculture due to the increasing population and declining land per capita. Small and marginal farmers, who make up 84.97 percent of all operational holdings and operating 44.31 percent of the area, need a powerful tool to ensure income, livelihood security, nutritional security and employment in a sustainable manner.

Advanced marketing of agricultural produce encompasses innovative strategies and technologies aimed at enhancing the efficiency, reach, and profitability of agricultural markets. This approach integrates modern tools such as digital platforms, precision marketing, and data analytics to better connect farmers with consumers and markets. It also emphasizes the importance of value addition, branding, and sustainable practices to meet evolving consumer preferences and market demands. By leveraging these advanced marketing techniques, agricultural producers can optimize their supply chains, reduce post-harvest losses, and achieve higher economic returns, ultimately contributing to a more resilient and sustainable agricultural sector.

A. Gram’s Staining
Introduction
The most widely used staining procedure in microbiology is the Gram stain, discovered by the Danish scientist and physician Hans Christian Joachim Gram in 1884. Gram staining is a differential staining technique that differentiates bacteria into two groups: gram-positives and gram-negatives. The procedure is based on the ability of microorganisms to retain color of the stains used during the gram stain reaction. Gram-negative bacteria are decolorized by the alcohol, losing the color of the primary stain, purple. Gram positive bacteria are not decolorized by alcohol and will remain as purple. After decolorization step, a counterstain is used to impart a pink color to the decolorized gramnegative organisms.
The Gram stain procedure enables bacteria to retain color of the stains, based on the differences in the chemical and physical properties of the cell wall.
1. Gram positive bacteria: Stain dark purple due to retaining the primary dye called Crystal Violet in the cell wall. Example: Staphylococcus aureus
2. Gram negative bacteria: Stain red or pink due to retaining the counter staining dye called Safranin

12.1 Active Packaging: Types, Mechanisms, and Applications • Antimicrobial Packaging: This type contains substances such as organic acids, enzymes, or metals like silver nanoparticles to prevent microbial growth, thus prolonging shelf life ( Ma, Q et al .2021) • Oxygen Scavengers: These absorb oxygen to minimize oxidation and spoilage, often used in snacks, baked goods, and meats. • Moisture Control: Packaging features absorbent materials or humidity regulating films to keep moisture levels optimal, particularly in fresh produce. • Ethylene Scavengers: These helps slow down the ripening process in fruits and vegetables by reducing ethylene gas levels. • CO? Emitters: These generate carbon dioxide to inhibit microbial growth, particularly useful in certain food products (Yildirim et al., 2018) 12.2 Mechanis

1. Introduction
Since plastic was discovered, global plastic production for industrial scale usages has grown exponentially, causing a tremendous increase in plastic waste from a few tons in the 1950's to almost 400 million tons in 2018 (Syberg et al. 2021). Plastic is non-biodegradable and ubiquitous.

Environmental degradation of plastic operates through a mechanism ofphysical fragmentation, photodegradation and microbial degradation (Wright
et al., 2020), resulting in fragmentation of larger plastics into smaller plasticparticles, also called microplastics and nanoplastics (MNPs). These debris areserious environmental threats (Hartmann et al., 2019).

Plant Nutrition

The term “fertility” refers to the inherent capacity of a soil to supply nutrients to plants in adequate amounts and in suitable proportions. Nutrition in plants may thus be defined as a process of synthesis of food, its breakdown and utilisation for various functions in the body. There are two types of nutrition:

1. Autotrophic nutrition: It is a type of nutrition in which the living organisms manufacture their own organic food from simple inorganic raw materials. The green plants exhibit autotrophic mode of nutrition and hence called the autotrophs.
 
2. Heterotrophic nutrition: Certain non green organisms like fungi and many bacteria fail to synthesize their own organic nutrients from inorganic substances.  These organisms are thus dependent on some other external sources for their  nutrition. Such plants are called heterotrophic plants and the mode of nutrition is called heterotrophic nutrition.

For better yield irrigation water must be free from soluble salts and from concentration of specific chemical substances that may hazard to soil with respect to salinity, sodicity, alkalinity and toxicity. Water analytical data which helpful to predict the magnitude of the effect of irrigation water on soil and plant growth under specific environmental circumstances so irrigation water must be analyzed for EC, pH, Na+, Ca⁺⁺, Mg⁺⁺, Cl^-, CO₃–, HCO₃-  and SO₄.^– 

Introduction

With the advent of agricultural intensification, soil quality has been the important concern for the scientists, environmentalists and the planners at the global level. Research efforts have been made at the experimental fields, research laboratories and few specific locations, in order to establish the yardsticks, standards and critical values of soil parameters to ascertain the quality of the soil. The primary aim is the management of soil resources as per the need and their rejuvenation through best practices in hand. The idea, as it was aimed at, has now percolated down to the minds of end users-the farmers. The state and Central governments have been sensitized and are attaching great priority to the soil health. In states like Tamil Nadu, Gujarat, Goa, Uttar Pradesh crores of farmers are given “Soil Health Cards”. Central Govt. has the plan to issue these cards to all farmers in the country, detailing the deficiencies in soil and the amount of fertilizer needed.

Greenhouse essentially functions based on solar energy to control environment for protecting cultivation from adverse condition. Computer simulation and mathematical modeling are important tools for determining the energy efficient design as well as predicting the overall system performance. The greenhouse climate may be used for crop drying, distillation, biogas plant heating, space conditioning, and aquaculture. Thus, any required configuration of greenhouse can be thermally modeled for predicting and optimizing the performance. The solar energy based greenhouse modeling are useful in evaluation of various applications like greenhouse heating, greenhouse cooling, greenhouse drying and aquaculture greenhouse. Greenhouse clubbed with ground air collector increase in plant and ambient temperature of 5–7°C during night in winter. Whereas, using evaporative cooling pad with greenhouse reduces the ambient temperature of 4–5°C during midday summer. A greenhouse can be very well used for large-scale crop drying, while not in use for cultivation. Some other applications such as covered crop drying and aquaculture are also discussed.

Phosphorus is one of the key nutrients required for higher and sustained productivity of potato and its influence on tuber yield is very well established. Phosphatic fertilizers are expensive and in developing countries like India, they are either imported or manufactured using imported raw material. Due to increase in cost in the recent past, there has been a decreasing trend in the amounts of P fertilizer applied in India (Sundara and Natarajan, 1997 and Sundara, 1988). At the same time, soils contain substantial reserves of total P, most of it remains relatively inert, and only less than 10% of soil P enters the plant–animal cycle (Kucey et al., 1989). Upon addition to the soils, soluble phosphates react with the constituents of the soil and form compounds that are less soluble. This conversion depends upon the soil type. In acid soils, the reaction products are aluminium and iron phosphates and in the predominantly calcareous soils, the reaction products are calcium phosphates. As a result most of the P applied (often as much as 90%) is rendered unavailable for crop uptake but is retained in insoluble form. This is the reason that the potato-based cropping systems in different potato growing pockets generally show positive P balance resulting into its build up (Singh et al., 1994). Thus, soils commonly have large reserves of ‘fixed’ P that could support long-term crop requirements if it could be mobilized through appropriate soil management including use of P-solubilizing microbes. The ability of phosphate solubilizing bacteria (PSB) to convert insoluble forms of phosphorus to an accessible form is an important trait in sustainable farming for increasing plant yields (Singh and Kapoor, 1994). The beneficial effects of PSB on crop productivity have been widely described. These soil phosphate solubilizing bacteria stay near the roots and make the phosphorus available to plants from soil.

Advanced storage methods of agricultural crops play a pivotal role in mitigating post-harvest losses, ensuring food security, and enhancing the economic viability of farming. These methods encompass a range of innovative techniques and technologies designed to prolong the shelf life of crops, maintain quality, and reduce spoilage. From controlled atmosphere storage and modified atmosphere packaging to cold storage facilities and hermetic storage bags, advanced storage methods offer diverse solutions tailored to different crops and environments. This chapter explores the key principles and benefits of advanced storage methods, highlights notable technologies and approaches, and underscores their significance in addressing the challenges of post-harvest management in agriculture.

1. Introduction

Modern technologies like artificial intelligence, machine learning, and big data have made robotics, a concept that dates back to ancient times, much more advanced. The area of robotics, originally used in industrial settings, has now expanded its scope to include a diverse range of industries, such as industrial robots, medical robots, military robots, space robots, and humanoid robots that adopt human-like characteristics.

In accordance with this existing structure, libraries have additionally adopted the use of robots, which have shown enhanced efficacy and capabilities in executing diverse library functions. A significant number of libraries around the world have used humanoid robots to facilitate a variety of library functions, including STEM education initiatives. Academic institutions such as the Chicago Public Library and the University of Rhode Island Library organize programs centered on robotics.

Libraries may become obsolete in the 21st century if they do not begin to harness new technology and improve their information and service delivery. Robots come in a variety of shapes and sizes, and they serve a variety of functions. It is difficult to define the purpose of a specific robot and its categories because each robot has its distinct feature and varies in size, shape, color, and components.

13.1 Biopolymer-Based Coatings with Antimicrobial Properties 13.1.1 Understanding Biopolymer-Based Coatings Biopolymer-based coatings are a game-changer in food packaging, offering natural, sustainable solutions for food safety. These coatings, derived from renewable sources, like polysaccharides (e.g., chitosan, starch, cellulose), proteins (casein, gelatin), and lipids (wax, shellac), have proven to be biodegradable and consumer-friendly alternatives to synthetic polymers. 13.1.2 Antimicrobial Properties and How They Work • Antimicrobial coatings are crucial in slowing down spoilage and extending the shelf life of perishable foods. They work by disrupting cell membranes, inhibiting cell processes, and creating oxidative stress in microbes. This is achieved through natural antimicrobials like essential oils (e.g., oregano, thyme, clove), plant extracts, and organic acids; inorganic agents like silver nanoparticles, zinc oxide, and titanium dioxide; and microbial-derived substances like nisin, lysozyme, and bacteriocins (Yu, Z et al ., 2022)

In any work environment the managers, facilitators are equipped with some specific type of skills to perform their activity effectively. In this study, multi stakeholders were involved in the process of Precision Farming from land preparation to marketing. Every stakeholder has a specific task to be performed so as to lead the client in the direction desired. In order to achieve this, the skill components viz., Management and Facilitating skills possessed by them and their own perception on those skills were assessed.