eChapters

Fruits with their delightful colours, flavours and tastes are nature’s wonderful gift to mankind. Apart from being the most nutritious food in the form of easily digestible simple sugars, vitamins, minerals and many phyto-nutrients (Plant derived micronutrients), they provide unique health benefits due to their antioxidant properties and valuable fibre. Antioxidants help protect the human body from oxidant stress, diseases, and cancers, and also boost the immunity of the body thus developing the capacity to fight against various types of diseases. The insoluble dietary fiber in fruits is known to provide protection from conditions like chronic constipation, hemorrhoids, colon cancer, irritable bowel syndrome, and rectal fissures etc. Due to their unique nutrition-profile the importance of fruits in our diet cannot be over emphasised.

Insects are a major limiting factor in fruit production. The infestation of insects pests on fruit trees in orchards adversely affects the quality and yield of fruits. The size, shape, taste, attractiveness and palatability of fruit deteroriates, due to which the market price is reduced and the growers incur losses. Fruit growers resort to use of chemical pesticides under such conditions. However many reports suggest that although the global production and use of pesticides in agriculture is increasing every year, but the damage due to insects has not decreased rather it has also increased, indicating that the use of pesticides is not the panacea remedy for all insect related problems. Many scientists are of the opinion that over-reliance on the use of synthetic pesticides in crop protection programs around the world has resulted in disturbances to the environment, pest resurgence, pest resistance to pesticides, and lethal and sub-lethal effects on non target organisms especially beneficial flora and fauna, including humans. Farmers spend thousands of rupees on pesticides. The residues of pesticides in food and fruits is yet another cause of concern. Fruits which are considered to be wonderful for health are often laden with unacceptable levels of pesticide residues nulling their beneficial properties. Pesticides have been linked to many diseases especially cancer. All these issues related with use of pesticides has triggered rethinking on the methods of control.The recent examples of the results of indiscriminate pesticides use , consequent crop failures and suicide by farmers now calls for introspection in this matter.

13.1 INTRODUCTION

The hot arid regions are spread over about 31.7 million ha area mainly in the States of Rajasthan, Gujarat, Andhra Pradesh, Punjab and Haryana, which inhabit on an average 61 persons per square km making up a home for population of nearly 20 million people. The Indian arid zone is characterized by high temperature and low and variable precipitation which limit the scope for high horticultural productivity. However, these conditions greatly favour development of high quality production of fruits such as date palm, ber, pomegranate, citrus, aonla, bael, grapes, guava and vegetables such as cucurbitaceous crops, spices and some medicinal plants. The optimized technologies and inputs could increase the existing low productivity. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas. The amelioration of the extreme conditions is also considered vital for life support to the inhabitants of this area. The recent awareness regarding the potential of these ecologically fragile lands for production of quality horticultural produce has not only opened up scope for providing economic sustenance for the people of this region, but also for bringing new areas to increase production through horticulture.

The arid horticultural crops have developed and/or modified to perform certain vital physiological functions even under stress. Strong deep root system (ber, bael, aonla, wood apple, jamun, etc.), moisture synchronous flowering and fruit development (ker, lasora, aonla, pilu, etc.) and other xerophytic characters i.e. leaf shedding in summer (ber), scanty foliage (ker), spiny cladode (cactus pear), mucilaginous sap in plant part (ker, gonda, pilu, bael, etc.), sunken stomata and fur/ hairiness and waxy coating on the leaf surface (phalsa, ber, gonda, fig, etc.) thorny nature, and selective or reduced absorption of cation (Na⁺) and anions (Cl^-, SO4^—) for survival under adverse arid conditions are peculiar adaptations. Therefore, cultivation of suitable species of fruit and vegetables in the arid areas will increase the sustenance of the inhabitants and provide the alternate sources of income through development of nurseries, small scale industries and exports.

troduction

Indian economy depends on agriculture and the agriculture sector in India contributes about17 percent of country’s GDP and provides employment to approximately two third of the population (United Nation Development Programme Fact sheet 2011). India is the second most populous country in the world. With the increasing population, the cultivable land resource is shrinking day by day. To meet the food, fibre, fuel, fodder and other needs of the growing population, the productivity of agricultural land and soil health needs to be improved. Green Revolution ushered through use of modern agriculture technologies such as greater use of synthetic agrochemicals like fertilizers and pesticides, adoption of nutrient-responsive, high-yielding varieties of crops, greater exploitation of irrigation potentials, etc. undoubtedly has increased production and labour efficiency in the post-independence era and made our countries self-sufficient in food production. 

1. Introduction

The aim of social networking sites is to build and maintain social interactions through content creation and communication within networks. However, academic social networks have a different focus. It prioritizes facilitating research and academic importance by connecting research groups and their scholarly outputs more effectively.These platforms typically offer features such as personal academic profiles, connections based on shared academic interests, and tools for managing and monitoring one's research outputs. Additionally, they enable users to utilize the research outputs of others in their f ield to advance their work. This study focus on to evaluate the capabilities of prominent academic social networking sites in meeting the essential requirements of researchers and the academic community(Bankar & Lihitkar, 2021)

A literature review attempts to discover, locate, and synthesize relevant research reports, articles, books, and other resources relating to a study subject. The review can be based on published sources like journal articles, conference papers, research abstracts, chapter books, research institution websites , and so on, as well as unpublished materials like theses and dissertations. By examining the literature, a researcher can take advantage of past research and results made by professionals to get the most out of their research.

Examining literature is an important part of every research project since it gives the investigator the information, they need to frame the study on the chosen topic. It directs an investigation on the appropriate path, keeping up with the most recent data.

Studies on Broad Areas of Webometrics

Webometric studies, ranging from earlier to more contemporary studies, have been recognized and organized under the following headings:

• Studies on the Growth and Development of Webometrics

• Studies on theoretical studies of content analysis

• Studies on Web Content Analysis

• Studies on web usage analysis

A. Enumeration of Different Microflora of Soil
Introduction
Agriculturally, soil is the region which supports the plant life by providing mechanical support and nutrients required for growth. From the microbiologist view point, soil is one of the most dynamic sites of biological interactions in the nature. Soil is an admixture of five major components viz. organic matter, mineral matter, soil-air, soil water and soil microorganisms/living organisms. The amount/ proposition of these components varies with locality and climate.

The soil organisms are broadly classified in two group’s viz. soil flora and soil fauna, the detailed classification of which is as follows.
1) Soil flora
a) Microflora Bacteria, Fungi, Molds, Yeast, Mushroom, Actinomycetes, Streptomyces, Algae e.g. BGA, Yellow Green algae, Golden brown algae.
b) Macroflora

Abstract

The Car Nicobar Island is one of the several islands in Indian Ocean which was severally damaged by the Great tsunami on 26 December 2004. The great tsunami event caused massive devastation, in the form of loss of life and property in south and south East Asia. The objectives of the study are to assess the changes in the coastal features of the Car Nicobar Island using various indicators such as the tsunami height, run- up elevation, water flow direction, erosion, sand deposition and coastal subsidence. Andaman &Nicobar Islands are the summit of the submarine mountain range lying along the great tectonic suture zone extending from Eastern Himalaya to Sumatra and Lesser Sunda via Myanmar border and Arakan hills. The IRS P-6 satellite data has been found to be very useful in the present tsunami assessment studies. The digital analysis of the satellite data was done using the image processing software (ERDAS IMAGINE 8.4) and DTM to quantify the tsunami height (15 m), run up elevation (2-19 m), inundation (295-1203 m) and coastal responses. The settlements and coconut plantations have been severely damaged in the island, which were assessed using GIS analysis of the pre and post-tsunami satellite data.

Keywords: Tsunami, Wave Height, Run-up Elevation, Inundation, Coastal Responses, Remote Sensing, GIS.

Orchids are known for their exquisite beauty and trade in global floriculture business. The Netherlands is pioneer in roduction and ex ort of tem erate orchid while Thailand and Hawaii are the world leader in tropical orchids, respectively. Recently, Malaysia, Singapore, Thailand and Sri Lanka are catching the international market. The orchid industry is expanding in terms of magnitude in some of the major orchid-producing nations. The global orchid market has passed $ 1 Billion mark in 2010. The leading orchid producing countries in 2010 are:

Country Production ($ million) Japan 280 USA 170 Taiwan 130 China 70 Brazil 60 UK 45 Thailand 35 Italy 30 New Zealand 20 Source: Orchid News The world consumption of orchids (potted plants) is valued more than $ 500 million (2000). The Dominican Republic, Costa Rica and India have recently begun to produce orchids for export. Commercial production of orchids has increased dramatically through the world in the past quarter century. The most common genera sold in Japan from 1993 to 2002 were Phalaenopsis (30%), Nobile type Dendrobium (20%), Oncidium (20%), Cymbidium (15%) and Cattleya (10%). The potted orchids sold through Dutch flower auctions increased from 50, 0000 to 18 million pots.

14.1 INTRODUCTION

The efforts for harnessing the natural resources for sustainining the human race have been ‘on’ since the beginning of the civilization. The basic needs of food, fuel and fodder are obtained from the land resources with the combination of water and sunlight. The combination of information technology and use of hi-tech equipments paved the way for the introduction of precision horticulture. Precision horticulture may be defined as application of a holistic management strategy that uses information technology to bring data from multiple sources to bear decision associated with agriculture production, marketing, finance and personnel. Enhanced input efficiency is an important component of horticultural production under precision horticulture site specific management. Enhanced input efficiency in crop management can be obtained only when suitable varieties, desired amount of nutrients and water based on calculations, at right time and by proper method are used.

With recent advances in geographic positioning system, remote sensing, data processing, harvesting equipment, fertilizer and pesticide applicators, the approach can be used from a more practical stand point to identify variability and to use the variable rate of inputs over an entire field.

In recent years, there is considerable awareness about the nutritional security and food safety. More emphasis is given to underutilized fruits due to their high nutritive and medicinal value in addition to being resistant/tolerant to many biotic / abiotic stresses. The demand of these fruits are gradually increasing owing to tremendous potential for commercial exploitation aimed at improving the economic status of the poor and marginal farmers. An area, which needs immediate attention, is the collection, documentation, conservation and utilization for their sustained production and popularization.

Sverdrup’s contribution could not take into account of the western boundary and so could not explain about the circulation what happened along the west coast of the ocean. Thus his circulation, as shown in Fig.8.1c in the chapter 8, is incomplete. This problem was solved by an American Oceanographer, Henry Stommel, in 1948.

Millets or nutri-cereals are the ancient grains which have now regained the interest of the scientific community as the super grains. These exhibit excellent nutritional and technobiofunctional profile apart from exhibiting tolerance to biotic and abiotic stresses. The millets are gluten free and show high in vitro protein digestibility, resistant starch content, antioxidant and prebiotic potential providing health benefits for all age groups ranging from paediatrics to geriatrics. The presence of certain anti-nutritional factors can lower the bioavailability of proteins and minerals. Processing enhances the nutritional and functional properties by increasing the antioxidant content and lowering the antinutrients. Different value added products can be prepared by incorporating millets thereby enhancing the nutritional and functional attributes. It is necessary to bring millets into regular consumption by the food industry in the interest of nutritionally and health-conscious consumer.

1. Introduction

Library enhances socioeconomic development by creating a knowledgeable society, empowering marginalized people, and promoting economic activity, skill learning, cultural identity enrichment, and decision-making participation. These services are supported by infrastructure, ICT, media. Libraries are responsible for knowledge, acquisition, management, fostering mutual relationships between librarians, the publics, and stakeholders. Its role as a storehouse of resources worldwide, including acquiring, organizing, preserving, storing, and making information available. Public libraries are important for public infrastructure, community health, and supporting social development goals. The contributions of the various types of libraries are discussed below:

1.1. National Library

A country's reference library is called its national library. It is the resource that all kinds of libraries utilize since it has a collection of all books published by Academic Library nationals in every subject area, as well as writings about the nation written by both nationals and non-citizens and by people in need of materials made in the nation. As a result, it is responsible for maintaining the country's cultural legacy and making the national bibliography available each year.

Websites

Information science is an interdisciplinary field that skirts the study of the organization, production, retrieval, storage, retrieval, use of information, and dissemination. Information and Metric studies of storage and recovery are the primary areas of Information Science. Today’s challenges for information personnel are to pave the way through enormous volumes of information brought about by different means.

The World Wide Web (WWW ), an information space, is a complex structure that incorporates all types of information that need different users and a layperson to the researcher. It is a system of interlinked hypertext documents approached via the Internet . The web pages can be viewed in a way that contains images, text, videos, and several multimedia through the forms of a web browser and negotiated between them with the help of hyperlinks.

It is also a system of multimedia that supports uniquely formatted, using markup languages like HTML or digital documents. These scripting languages support links to other documents, video files, graphics, and audio.

The term ‘Webometrics ’ (Bajorneborne & Ingwersen, 2001) was coined for content analysis , search engine performances, quantitative analysis of web related phenomena, links, and web technology analysis from an information science perspective.

Natural disasters are extreme events within the earth’s system (lithosphere, hydrosphere, biosphere or atmosphere) which differs substantially from the mean, resulting in death or injury to humans, and damage or loss of valuable good, such as buildings, communication systems, agricultural land, forest, natural environment. They are a profound impact of the natural environment upon the socio-economic system (Alexander, 1993). This impact may be rapid, as in the case of earthquakes, or slow as in the case of drought. It is important to distinguish between the terms disaster and hazard. A potentially damaging phenomenon (hazard), such as an earthquake by itself is not considered a disaster when it occurs in uninhabited areas. It is called a disaster when it occurs in a populated area, and brings damage, loss or destruction. Natural disasters occur in many parts of the world, although each type of disaster is restricted to certain regions. Natural disasters are events which are caused by purely natural phenomena and bring damage to human societies (such as earthquakes, volcanic eruptions, hurricanes). Mitigation of natural disasters can be successful only when detailed knowledge is obtained about the expected frequency, character, and magnitude of hazardous events in an area. Many types of information that are needed in natural disaster management have an important spatial component.

1. Introduction

Ohmic heating is an emerging method of thermal processing which have the feature of HTST treatment (Halden et al., 1990) with lower energy inputs (Choi et al., 2011; Sastry et al., 2011). During ohmic heating (Fig. 1) the alternating current is passed through the food material, where food acts as a resistor to the flow of electric current and leads to the instant volumetric heat generation by following the Joules first law of heating (Pereira & Vicente 2010; Lima et al., 1999 and 2001; Wang, 2014). Ohmic heat treatment of food material has been found to reduce microbial load of the food material simultaneously with the inactivation of the inherent enzymes (Demirdoven & Baysal 2014; Yildiz & Baysal 2006; Jakob et al., 2010). Despite the problems of electrochemical degradation associated with it, ohmic heating has been successfully studied for its use in preheating, blanching, pasteurization and extraction (Leizerson, & Shimoni, 2005; Lima & Sastry, 1999; Lakkakula et al., 2004). A majority of studies that have explored the effect of ohmic treatment have focused on a number of commercial products from pulp (strawberry), or puree (pea) to juice (grape), etc. (Castro et al, 2004; Icier et al, 2008; Icier et al., 2006). However, the present chapter is confined to put some light on the studies conducted on ohmic heating of various liquid food material and its effects on various parameters of the food material.

The beginning of protected cultivation in the country has paved the way for export of horticultural produce, especially of flowers to earn valuable foreign exchange. The technology also became handy for quality production of flowers and F₁ hybrid seeds for domestic and export markets. In view of the globalization of international market and tremendous boost that is being given for export of flowers, there has been a spurt in the demand for protected cultivation technology. Low-cost polyhouses are quite popular in the North-East and in the northern plains, flowers are being raised in polyhouses either for capturing the early markets or to improve the quality of seedlings. Several commercial floriculture ventures are coming up in Uttrakhand, Maharashtra, Karnataka and Tamil Nadu to meet the demands of both domestic and export markets. There has been a substantial increase in area under protected cultivation of different flower crops. Though there were initial hitches owing to the cost sharing, farmers of some states have taken maximum benefits of the existing schemes and adopted the technology. Protected cultivation technology is one of the most useful technology inputs which hold promise to transform Indian floriculture and bring in the “Colour Revolution”.

Nearly, 40 countries are involved in protected cultivation of flower and vegetable crops. New production centers are being added constantly, mostly from developing nations. Today, majority of production is from developing countries like Zimbabwe, Morocco, Kenya, Ecuador, Costa Rica, Mexico, Singapore, Malaysia and India. In developed world, USA has an area of about 6,000 ha under greenhouses which are mostly used for floriculture. The Netherland is traditional exporter of greenhouse grown flowers all over the world. Israel, the largest exporter of cut flowers, has wide range of crops under greenhouses. About 1,000 ha area is under protected cultivation. Approximately, 98% of flowers are grown under open field cultivation and hardly 2% under the greenhouse cultivation.

Over 85% of the rural population in India is dependent on agriculture for their livelihood. About 50% of them being poor, most of their earnings are spent on meeting their basic needs, particularly food. With the increasing population over the last five decades, their per capita share of land and water resources has reduced substantially. As a result, rural people are faced with the problem of unemployment.

Inspite of agriculture being a major source of livelihood, the productivity as well as profitability in agriculture have been significantly low in the country. While the productivity can be attributed to illiteracy, lack of awareness, poor dissemination of technology, inadequate investment in agricultural inputs and poor communication and information services, lack of profitability is mainly due to inadequate and inefficient infrastructure required for forward and backward integration, poor post harvest and processing facilities and poor connectivity with market, resulting in exploitation by large number of middlemen. Traditionally, the farmers have been dependent on the Agricultural Extension Agencies of the State Government for information, input supply and marketing services. Over the years, these agencies are not being able to cope up with the growing responsibilities and specific needs of the farmers. To overcome this problem, Farmers’ Cooperatives have been promoted to supply various agricultural inputs and organise the marketing of farm produce. Although, this was an excellent concept, most of these cooperatives could not carry out the work economically and efficiently due to lack of commitment from the elected leaders and unfair trade practices by the competing traders. The farmers, not realising the inability of the extension agencies, are still dependent on the Government and external agencies to help them in managing their agri-business.

Systematic Sampling (Meaning and Concept)

In this chapter, we are going to discuss the systematic random sampling technique. This is a random / probability / quantitative sampling method. In our previous chapter, we discussed the stratified random sampling technique. We have said that this technique is used when the population is heterogeneous and needs to be stratified into homogeneous groups. We have also discussed steps to be followed when using stratified random sampling as well as the strengths and limitations of stratified random sampling. Systematic sampling is a commonly employed technique if a complete and up-to-date list of the sampling units is available. The procedure involves choosing the very first object arbitrarily and the remaining members of the sample will be selected naturally according to any pre-decided sequence containing regular spacing of units. In this method, units of the population are numerically, geographically, and alphabetically arranged either in ascending or descending order (generally ascending order is preferred). When the ordering of the elements is related to the characteristic of interest,

Traits such as growth, lactation test day yield, semen evaluation are longitudinal traits measured repeatedly on the animal and random regression models (RRM) have been found to be suitable for modeling these traits, The methodology used, data requirement, assumptions, validity, software available and application of RRM are explained in this chapter.

Growth, test-day milk yield, and semen traits are examples of longitudinal traits measured repeatedly on the animal and random regression models (RRM) have been found suitable for modeling such traits. RRM is based on a covariance function which could be defined as “a continuous function to give the variance and covariance of traits measured at different points on a trajectory” (van der Werf, 2001). Kirkpatrick et al. (1990) showed that variance components for longitudinal data can be modelled through covariance functions. Random regression models (RRM) and the resulting covariance function have been recognized as ideally suited for the analysis of longitudinal data (Hill, 1998; Meyer, 1998).