eChapters

PESTS OF CEREALS

Rice (Oryza sativa)

Rice is the staple food of a vast majority of people throughout the world, especially in India. Rice crop is grown in about 75 million acres, which is about one-third of the total world area under rice. The warm and humid environment for the rice crop is best suited for invasion by several insect pests and as many as 85 species of insects are known to infest this crop. The damages caused by different pests extend from the seedling to harvest stages of the crop. Some of these pests are widely distributed and cause extensive damage. The more important pests are described below:

1. Rice stem borer or Rice yellow stem borer

Scirpophaga (Tryporyza) incertulas

Order - Lepidoptera

Family - Pyraustidae

Among the pests, which ravage rice crop, ‘rice stem borer’ is a major one and infests rice crop at all growth stages, from seedling to flowering. It is a specific pest of rice alone and is more serious during the months of October-January. The pest has a wide distribution in all Asian countries. The damages caused by this pest ranges from 5-20 per cent. Generally, late varieties of rice are more severely infested than the early maturing varieties, because of the possibility of the pest multiplying in larger numbers by the time the late varieties come to maturity. Cold weather with high humidity and low temperature prevalent during October-December is found to be conducive for the multiplication of the insect.

Introduction

Pig production and marketing have been driven by the growing consumer demand for high quality and low cost animal protein. As a result, organized and industrialpiggery has been rapidly developing globally. Pigs are domesticated in various parts of India, especially in South-Central and North Eastern Region (NER), each place has its own locally adapted pig breed, and most households raise at least one or two pigs each year. Pigs are more valuable alive than dead, acting as efficient converters of kitchen and agricultural scraps into nutrient-rich fertilizer, before becoming pork that could even sometimes be given as a wedding gift, used to curry political or social favor, or eaten as part of local celebrations, especially in NER. The 21stcentury agricultural and dietary changes however represent radical departures from the small holder production system and consolidation of industry is clearly visible in the last two decades. It should be noted that the industrialization of pig production is a relatively recent phenomenon globally. In India, too, the speed and scale of change has been phenomenal, conditioned by policies, investments and the transforming economic system.

Leaves are alternate in distichous arrangement; lamina long and linear and leaf sheath covering the internodes; ligule membranous and auricle claw shaped. The inflorescence is a spike and florets are borne on rachis node. Each spikelet has three florets. In two row barely, lateral spikelets become sterile.

1. General Olericulture

Olericulture is Latin term ‘Olerus’ meaning herb.

China, India, USA, Turkey and Italy: Major vegetable producers.

Indian subcontinent has 80 species of major and minor vegetables apart from several wild species consumed as vegetable.

About 175 different types of vegetables are grown in India, includes 82 leafy vegetables and 41 root (tuber and bulb) crops.

Cucurbits, taros, yams, brinjal and okra have rich diversity in Indian gene centre.

USA is leading importer of cucumber and gherkins, assorted canned vegetables and other dehydrated vegetables from India.

Germany leads in import of preserved onion, green pepper in brine and dehydrated onion flakes/powder.

Singapore leads in import of dried asparagus; Japan in dehydrated garlic flakes; UAE in dehydrated garlic powder; Bangladesh in peas and Switzerland in dried mushrooms including morels.

Mizoram is the largest producer of chow chow.

6.1 INTRODUCTION

This chapter is concerned with the interactions which retain mobile chemical species in the soil environment. Emphasis is centred on the binding of small organic chemicals to soil particles of colloidal dimensions, and on the associations between polymeric materials and inorganic colloids which strongly influence the physical and chemical behaviour of soils. These interactions are also involved in the retention by soil of water, discussed by Farmer (1978) in the companion volume to this book, and in ion and ligand exchange reactions, and in mass flow and diffusion discussed in preceding chapters.

The term colloidal refers to particles and discontinuities of matter (e.g. pore spaces or thin films) of dimensions in the range of 1 nm to 1 jxm (IUPAC, 1972). For such finely divided systems the properties of the interfaces are very important because these largely control the behaviour of the colloidal systems. The term phase is used to describe the homogeneous parts of a system and an interface or surface is the boundary region between any two phases; the relevant interfaces are solid/gas, solid/liquid, liquid/liquid, and liquid/vapour. Where none of the solid, liquid, or vapour phases in a system are finely divided the ratios of the interfacial areas to the bulk volumes of the phases are small, and the effects of the interface between neighbouring phases can be neglected.

The most extensive surfaces in soils are contained in domains and micro- aggregates of colloidal particles (cf. Greenland and Hayes, 1978; Greenland and Mott, 1978), These surfaces are accessible from the pore spaces between solid particles. Under normal field conditions these spaces remain filled with water. Thus, although modern fertilizers, and chemicals for the control of plant growth, pests, and diseases are applied to soils as solids, liquids, and gases, most of the interactions with the soil colloidal constituents take place at the solid/liquid interface. We shall be primarily concerned here with uptake from the liquid phase by solid soil components, although interactions at the solid/gas interface can sometimes be important.

4.1. Physical characteristics

4.1.1. Colour, number of bands and hair profile

The physical characteristics of hair like colour, number of bands and hair profile showed huge variations in the same individual from region to region particularly in the domestic animal species. So, these features of hair cannot be considered as an important tool for species identification from hair. These findings are in accor dance with the observations of Sarkar et al. (2011). Who mentioned that the coat of mammalian species varies with season, habitat and sex of the individuals.

First Part: Multivariate Statistical Analysis
6.1. Results
The chapter deals with the result and discussion of the study using multivariate statistical analysis and participatory Rural Appraisal (PRA) techniques with the purpose to provide sufficient information so as to arrive at valid conclusion. Tables and models are commonly used in this chapter to support and supplement the textual materials. Discussion helps to interpret the results of the study in proper perspective and to relate them with other relevant studies.
Axiomatic statement on the variable interactions and behaviour selected for the study
Research setting in the present study presents a dynamic social-ecology which is evolving along and across the undulation of social process. Both the structural and functional dimensions and behaviour are in constant interaction and response with the subject respondents in terms of innumerable variables. For the present research only some selected characters have been selected for empirical titration. There is no wonder these variables can be catalogued in terms of dependent or independent variables rather should not be distributed in a binary mode. Rather these variables are with seamless transformations like the algorithm of quantum physics. That is how whenever a set of x variables are supposed to behave with a contributor characters the same can be responsive with a recipient behaviour, e.g. in stepwise regression, set of ‘x variables’ are not considered as the only source of causal variables along with the couple of ‘y variables’ which are promoting rest other y variables have also been considered as causal variables. Hence, in case of y1, the rest of the y variables have to be treated like: y2 = y2' ; y3' = y3; y4 = y4' and so on.

Introduction

India has a long history in the cultivation of vegetable crops and it sustains the livelihood of a large section of population directly or indirectly. Vegetable crops offer high returns,  have a potential to alleviate the poverty of people, provide nutritional security and essential raw materials for agro industries. These crops also offer greater rural employment opportunity and have high potential for foreign exchange earning. India bestowed with varied soil and high climatic conditions has excellent potential for growing both tropical and temperate vegetables. India is the second largest producer of vegetables in the world after China. The total area under vegetables is estimated 5.9 million ha which contributes more than 2.5% of total cropped area. The production is estimated  90.83 milion tonnes. China having a production of about 278.59 million tonnes  is the largest producer of vegetable crops in the world. The annual growth rate in vegetables is of the order of 2.6%. Potato, brinjal, tomato, chilli, cabbage, onion, cauliflower,okra and peas are grown on commercial scale. West Bengal, Uttar Predesh, Bihar, Orissa and Karnataka are the leading vegetable producing states. Maharashtra, Gujarat, Karnataka, Uttar Pradesh and Andra Pradesh are the leading states in onion production where as West Bengal, Uttar Predesh and Bihar are the leading potato producing states. Bengal, Orissa, Bihar and Assam are the leading brinjal producing states.

1.    Vegetables for Nutritional and Health Security
    
2.    Status of Vegetable Production
    
3.    Classification of Vegetable Crops
    
4.    Influence of Environment on Vegetable Production
    
5.    Management of Seedlings in Nursery
    
6.    Vegetables Based Cropping System
    
7.    Water Management
    
8.    Plant Nutrients and Integrated Nutrients Management
    
9.    Micro-Irrigation and Fertigation
    
10.    Pollination Management
    
11.    Integrated Pest Management
    
12.    Biological Management of Diseases
    
13.    Mechanisms of Biocontrol
    
14.    Weed Management
    
15.    Management of Vegetable Crops Under Polyhouse
    
16.    Post Harvest Handling and Storage of Vegetables
    
17.    Marketing and Export of Vegetables
    
18.    Export Trade of Vegetables in India
    
19.    Seed Technology
        
References

2.1 Insect Pests

Insects are often a major obstacle to the successful production of cucurbits (York, 1992). They can severely reduce yield, injure or kill plants, spread diseases and adversely affect fruit quality. A number of insect pests, mites and nematodes have been found to infest cucurbitaceous vegetables but fortunately, in India, fruit flies and a few species of beetles are of economic importance; aphids and blister beetles though of regular occurrence, seldom cause severe damage.
 
Other insect pests reported to infest the cucurbitaceous vegetables are pumpkin caterpillar, Diaphania indica (Sounders), snake gourd semilooper, Plusia peponis Fab., white fly, Bemisia tabaci Genn., stink bugs, Apspongopus spp. and flea beetle, Phyllotreta spp. etc. These biotic pressures on the crops are increasing day by day due to round-the-year intensive cultivation of photo and thermo insensitive cultivars as well as indiscriminate use of toxic agro-chemicals in the present era of chemicalized agriculture.

6.0 General

No lessons can be drawn without the experiences of the past. In fact, much of engineering, rather all sciences have developed in bits and pieces from the experiences of the past. The engineers by and large have never become wiser in one day. They have become wiser slowly and slowly with their own experiences and from the experiences of past engineering works. Wisdom lies to gain wisdom from experiences/draw lessons from the marvellous engineering works constructed so far. It helps us in a direction for further development of technological skills.

Here an effort is made to draw lessons from experiences of the canals constructed in the past.

 There are several aspects of such experiences. A few important aspects of studies are:

 (i) Internal hydraulic sections of the canal with respect to discharge, topography, stability of side slopes, type of lining, operation and maintenance problems and their solutions etc.

 (ii) Design of canals banks (embankment) with respect to discharge, depth of flow, depth of cutting /filling, below/above natural ground level, type of soil, topography, operation and maintenance, drainage of banks etc.

 (iii) Canals aesthetics and arboriculture

 (iv) Other utility/service of canal such as multi-objectives of hydropower, irrigation, drinking/industrial water supply, social needs of recreation, forests etc.

Groundnut

Groundnut roundnut is believed to have originated in Brazil and later spread to many countries all over the world. It is known to humanity since 950BC. Groundnut crop and its products have multiple uses. Being a leguminous crop it enriches the soil with nitrogen through symbiotic biological fixation by rizhobium. The economic product, groundnut in shell, contains the seeds, which are edible. The shell as well as the haulms serve as fuel and fodder. The seed oil serves as a good cooking oil while the cakes are good sources of protein for animals and even humans. Groundnut (Arachis hypogaea L,) belongs to leguminosae family and papilionacea sub family. It consists of two sub species each with two varieties. The first one hypogaea has the variety hypogaea (virginia group) and variety hirsuta kohla while the second one fastigiata has the variety fastigiata (valencia group ) and the variety vulgaris (spanish group). Hypogaea varieties are spreading types with branching and lack infloresence on the main stem. They are of longer duration and have fresh seed dormancy . Varieties of the fastigiata are of erect type with branching and flowering on the main stem also. The crop is of shorter duration than hypogaea types, but with little fresh seed dermancy.

The major groundnut producing countries of the world are China, India, Nigeria, U.S.A. Indonesia, Argentina, Sudan, Senegal and Myanmar. The cultivation is spread in tropical and sub-ropical regions. Groundnut is a self- pollinated crop and pollination takes place in the morning. After fertilization an elongated stalk namely peg develops which enters the soil, bends horizontally and swells to become a pod. Within the pod, two, three or four kernels are formed. The crop can be grown under rainfall conditions ranging from 50-125cm, with good distribution during flowering and pegging stages. Sandy loams, loamy soils, and black soils with good drainage are suitable for growing the crop.

THE AGRO-ECOSYSTEM CONCEPT

An agro-ecosystem is a site of agricultural production farm, for example- understood as an ecosystem. The agro-ecosystem concept provides a framework with which to analyze food production systems as wholes, including their complex sets of inputs and outputs and the interconnection of their component parts.

Because the concept of the agro-ecosystem is based on ecological principles and our understanding of natural ecosystems, the first topic of discussion in this chapter is the ecosystem. We examine the structural aspects of ecosystems their parts and the relationships among the parts and then turn to their functional aspects how ecosystems work. Agro-ecosystems are then described in terms of how they compare, structurally and functionally, with natural ecosystems.

Structure of Natural Ecosystem

An ecosystem can be defined as a functional system of complementary relations between living organisms and their environment, delimited by arbitrarily chosen boundaries, which in space and time appear to maintain a steady yet dynamic equilibrium. An ecosystem thus has physical parts with particular relationshipsthe structure of the system that together take part in dynamic processes the function of the system.

The most basic structural components of ecosystems are biotic factors, living organisms that interact in the environment, and abiotic factors, nonliving physical and chemical components of the environment such as soil, light, moisture and temperature.

1.1. Establishment of orchard
• A long term investment and deserves a very critical planning.
1.1.1. Location and site
• Well established fruit growing region, because one could get benefit of experience of other growers.
• Market should be close to the area with assured demand.
• Climate should be suitable to grow the chosen fruit crops; free from cyclones, frost, hailstorms and strong hot winds.
• Adequate and good quality water supply should be available round the year.

4.1 Seeding equipment

Sowing is an art of placing seeds in the soil to have good germination in the field and thereby gives better productivity. Seeding is one of the most important farm operations after soil preparation because the time of sowing and the way in which it is done decisively influence germination of the seed and growth of the seedling during its early stages. This in turn affects the subsequent time of weeding and inter-culture, harvesting and threshing and finally the yield. Seed needs an adequate supply of moisture, temperature, air and protected environment for good germination.

Crop sowing refers to broadcasting seeds on the surface of soil, placement of seeds in the soil or transplanting seedlings in the soil, under optimum conditions. The primary functions of any planting operation are to establish an optimum plant population and spacing, the ultimate goal being to obtain the maximum net return per unit area. Plant population and spacing requirements are affected by various factors such as the crop type and variety, soil type, soil fertility level, soil moisture and row spacing upon the cost and convenience of operations such as thinning, weed control etc. In order to get better returns, the right amount of seed should be placed at the right time and at a predetermined depth and spacing in the soil. Usually the depth of sowing depends upon the moisture availability and seed emergence capacity. The amount of seeds to be sown varies according to the size of seeds, percentage germination etc.

7.1 Harvesting and threshing equipment for cereal crops

Harvesting and threshing is an important operation in the farming. This can be done either manually or with the help of power operated machinery. Harvesting of field crops continues to be one of the most labour intensive operations in agricultural production system. Harvesting of crop is generally done by hand using sickle in India. Power operated harvesting machinery has not caught up with Indian farmers because of limited size of land holdings, economic constraints and non-uniformity of field conditions. Manual harvesting with different hand tools continues to be dominant, which takes 170-200 man-hours to harvest one hectare of paddy crop. Due to high labour demand at the time of harvesting, the operation continues for weeks together, resulting in over drying of crops in the field causes grain losses to the extent of 5 to 15 percent and even results in loss of crop due to untimely rain during harvesting. Mechanical devices to harvest wheat and paddy crops have become popular especially in northern India to minimize the field losses resulting from shattering, unfavourable weather conditions and pilferage.

MANIFESTATIONS OF GASTROINTESTINAL TRACT DISEASES Diseases of gastro-intestinal tract may be acute or chronic. Dehydration and shock are the major effects of acute and hyper acute diseases of gastrointestinal tract respectively. While major effect of chronic dysfunction of gastrointestinal tract is exhaustion from lack of food and water owing to loss of appetite (anorexia,). Other manifestations of gastro-intestinal tract diseases are abnormalities of prehension, mastication and swallowing; salivation; diarrhea: constipation and tenesmus; ileus; vomiting; hemorrhage; abdominal pain; abdominal distension; and shock and dehydration. Abnormal Prehension • Prehension   abnormalities may arise from paralysis of jaw muscles and tongue, dentition defects, mouth pain