eChapters

Shrinking land resources, vulnerable market of cash crops along with climatic aberrations have adversely affected the Indian agriculture and as a result, small farmers are increasingly alienating from this profession. To sustain their livelihood, farmers are increasingly adopting the alternative sources and dairy farming is one of the best-suited businesses, which can rightly fit at this stage. It is fast emerging as a potential business in rural India, particularly in the peri-urban belt. Among the major inputs required to set up a dairy unit, round the years availability of good quality fodder is the foremost requirement. Green forages are rich and cheapest source of carbohydrates, protein, vitamins and minerals for dairy animals. The importance of forages in our country is well recognized since feeding forages alone accounts for over 70% of the cost of milk production. Hence by providing sufficient quantities of green fodder instead of costly concentrates and feeds to the milch animals, the economics of dairy unit can easily be maintained. Milch animals need around 40 kg of green fodder daily for better milk production and for maintaining good health of the animal. There is a large number of fodder crops grown in our country, the majority being dominated by pearl millet, sorghum, maize and oats in the non-leguminous and berseem and lucerne in the leguminous category. Pearl millet and sorghum are extensively grown as cereals in the southern and dryer regions of the country and the stover remained is used as animal fodder. However, the nutritional quality of the stover is very poor due to higher content of indigestible lignin and low levels of cellulose, whereas, the cultivated green fodders are mostly confined to the North-Western plain zones of Punjab, Haryana and Western Uttar Pradesh. The availability of round the years quality green fodder, therefore, seems to be a tough task. At present, the country faces a net deficit of 61.1% green fodder, 21.9% dry crop residues and 64% feeds (IGFRI Vision, 2030).

Jasmines constitute a group of traditional flower crops which are commercially grown for their fragrant flowers and essential oil production. There are trailing, climbing, and erect growing species and cultivars in the genus Jasminum. The genus Jasminum comprises of more than 200 species which are known to occur in different tropical and subtropical regions of the world. The countries growing Jasmines on a commercial scale are India, France, Italy, Morocco, Algeria, North Africa, Egypt and Spain. More than 80 Jasminum species are found in India, of which only four species viz., Jasminum sambac (Mogra / Gundumalli), Jasminum auriculatum (Jui / Mullai), Jasminum multiflorum syn Jasminum pubescens (Kunda / Kakda) and Jasminum grandiflorum (Jai / Pitchi) are widely used for commercial cultivation. Jasmines are commercially grown in many parts of the country as a dry land crop. The leading states in jasmine production are South Indian states like Tamil Nadu, Karnataka and Andhra Pradesh. In India, the commercial cultivation of jasmines are popular in Athoor, Coimbatore, Dharampuri, Dindigul, Erode, Krishnagiri, Madurai, Nilakottai, Periakulam, Salem, Thiruchirapalli, Thirunelveli, Thiruvallur, Tirumanagalam, Vellore, Virudhunagar etc. in Tamil Nadu; Bangalore, Bellary, Kolar, Mysore, Shimoga, Tumkur etc. in Karnataka ; Hyderabad, Khammam, Mahbubnagar, Mancherial, Ranga Reddy, Sangareddy, Vikarabad, Warangal Rural, Yadadri etc. in Telangana; Anantapur, Chittoor, Cuddapah, East Godavari, Guntur, Krishna, Kurnool, Nellore, Prakasam, West Godavari etc. in Andhra Pradesh; Ahmednagar, Aurangabad, Pune, Sangli etc. in Maharashtra; Ahmedabad, Anand, Bharuch, Bhavnagar, Kutch, Vadodara etc. in Gujarat; Gazipur, Jaunpur, Kannauj etc. in Uttar Pradesh; Ajmer, Jaipur, Kota, Udaipur etc. in Rajasthan; Panskura Ranaghat etc. in West Bengal; Guwahati, Hoja, Jorhat etc. in Assam ; and parts of Punjab and Delhi. Jasmines contributes markedly to the national economy and it is estimated that annually more than 20 crores worth of jasmine flowers are produced and traded in India and are also exported to countries like Malaysia, Singapore, Sri Lanka, UAE and United States (Safeena et al., 2017).

Introduction and Applications of 1,2-Azoles
Interest in the chemistry of 1,2-azoles has grown significantly over the last ten years, mostly due to the discovery of intriguing features shown by a large number of 1,2-azoles derivatives. 1,2-azoles, which are five-membered heterocycles with nearby nitrogen and heteroatoms (X = N, O, S), are highly prized in organic synthesis by using heterocyclic substituents that contain nitrogen, sulfur, or oxygen, the five-membered ring system’s biological activity and bioavailability can be improved. Functionalized pyrazoles, isoxazoles, and isothiazoles are found in a large number of naturally occurring and synthetically produced medicinally relevant molecules (Chakroborty et al., 2013, Preeti et al., 2018). Numerous biological actions are exhibited by these molecules (Pathak et al., 2012, Yan et al., 2007, Ruan et al., 2012, Katritzky et al., 2001, Shaw et al., 2012, Waldo et al., 2007, Uramaru et al., 2010, Cutri et al., 2004). A few examples of molecules with this structural pattern are shown in Figure 1. Table 1 lists the uses of 1,2-azoles in medications, agrochemistry, natural products, and pharmaceuticals.

Rose is one of the most important and versatile flower crops, with a distinct role in both loose and stemmed flower production. Loose roses are harvested as fully open flowers for garlands, religious offerings, cosmetics and numerous value-added products. The chapter discusses the traditional importance of rose in India and its applications in rose water, gulkand, essential oil, concrete, absolute, incense and other products. It covers origin, distribution, genetics, botanical characteristics and commercially important varieties. Production practices include climate and soil requirements, propagation, planting, nutrient management, irrigation, pruning and pest and disease management. Harvesting, postharvest handling, yield and value-addition opportunities are also discussed.

Abstract

Mycotoxins are naturally occurring chemicals produced by fungi growing on grain, feed or food. The fungi that produce mycotoxins in grains commonly include Fusarium, Aspergillus and Penicillium species. The toxins can accumulate in maturing corns, cereals, soybeans, sorghum, peanuts and other food and feed crops in the field and in grain during transportation. The toxins may occur in storage under conditions favorable for the growth of the toxin producing fungi. Diseases in animals and human beings resulting from the consumption of mycotoxins are called Mycotoxicoses. These fungal metabolites are detrimental to the health of both animals and human. Toxicity ranges from acute death to chronic diseases, cancer and reproductive malfunction. Mycotoxin contamination of food and feed grains is a serious economic problem for grain producers and processors because grain contamination impacts market 

Eswaran (2007) made graphic analysis with the model proposed by Jinks and Hayman (1953). He evolved 30 hybrids from six parents in a diallel fashion. The results are presented in Tables 71-74

Wild life diseases are given more priority in the recent days due to the fact that conservation of any wild fauna canít be achieved fully, unless due efforts are equally given pertaining to the assessment of health status and the disease management, in the concerned wild animal species.

Squashes and pumpkins are vegetable crops of the genus Cucurbita. They are grown in temperate, subtropical and tropical regions of the world. These crops are common elements in home gardening and subsistence agro-ecosystems in most countries and are produced on commercial scale in some countries. The economic botany, genetics and evolutionary history of Cucurbita has been reviewed by Whitaker and Davis (1962) and Whitaker (1974).

A. Answer the following questions:

1.    What is concentrate ingredients?

Ans: These are feedstuffs having more than 60% TDN, less than 35% cell wall contents and less than 18% crude fibre on dry matter basis.

2.    What is soilage?

Ans: Pasture whether natural or cultivated when cut and fed green to an animal in its own stall is called soilage.

3.    What is husk?

Ans: Dry outer covering of grains and grams e.g. gram husk, rice husk.

4.    What is fodder?

Ans: Any green plant or crop meant for animal feeding for supply of nutrients and bulk.

5.    What is leguminous fodder?

ABSTRACT

In earth system about 60% of the world's population live within 60 km of coastline and use the coastline for their livelihood. Environmental pollution of the coast, inshore water and deep ocean is one of the important topical issues in the context of human health and global warming. To combat this natural and man made problem, we have to rely on qualitative analysis quantitatively. In the recent advancement in information and technology field, spectral data plays a major dominant role in the environmental studies. This could provide more powerful and accessible means to exploit the enormous wealth of data available in the system. The high-resolution imaging spectrometry (hyperspectral imagery) will help to analyze the data for mapping and other environmental modeling applications. This could attain advanced approaches to deduce surface characteristics and extract features from hyperspectral images. The current capabilities are in which, the prototype system can classify pixels according to surface type. The classification process employs neural network analysis of inputs which include pixel spectra and a variety of processed image metrics, including image “texture spectra” derived from fractal signatures computed for sub image tiles at each wavelength. Thus, this kind of technical analysis can prove to achieve coastal area studies well in advance in the ongoing environmental changes more precisely.

10.1. Heterosis

Occurrence of a genetically superior offspring from mixing the genes of its parents.

Superiority of F₁ hybrids over its both parents in terms of yield and vigour.

Values denote the subjective significance or preferences accorded to objects, concepts, or experiences within an individual’s cognitive framework. The concept of value encompasses entities or outcomes that are desired or selected by individuals. Social values, as expounded by Green (1964), represent enduring cognitive and affective constructs pertaining to objects, ideas, or individuals within a societal context. These values are often abstract in nature and may operate at a subconscious level, embodying implicit assumptions regarding what is deemed morally and socially significant. As articulated by Young (1959), social values encapsulate abstract and subconscious beliefs regarding notions of righteousness and importance within a communal framework.

Homeopathy

The word ‘Homeopathy’ is derived from two Greek words “Homeos” and “Pathos” meaning “similar” and “suffering” respectively (Mukherjee and Wahile,2006). This system of medicine is based on the principle of ‘Similars’ propounded by Dr. Samuel Hahnemann in late 17th century. The practice of Homeopathy came into being and gained wide spread popularity too early in the history of medicine at a time when it was impossible to provide any kind of explanation for its clinical efficacy. It is a complete and separate approach to health care using dynamized micro doses of herbs, minerals or animal products to stimulate the body’s innate healing mechanism. Homeopathy is claimed to be more ecological, compassionate and comprehensive owing to use of micro doses. Clinical anecdotal evidence exists to indicate that homeopathy is beneficial in veterinary practice also. The homeopathic remedies stimulate the body defense to heal itself. The practice of homeopathy began first and science in its efficacy is being discovered later as was in case of immunology. An increasing interest is being shown in Homeopathy as a complementary and alternative treatment for both human and animal diseases owing to ever increasing problem of emergence of resistance in micro-organisms to antibiotics, their residues in animal products, and side effects of modern drugs. But critics of homeopathy are not reconciling with the use of highly diluted homeopathic remedies and considering it as a controversial therapy. Researches with the help of modern technology are now illustrating science in homeopathy.

Ultrasonography of the GI tract presents problems and challenges for the sonographer. Sonography of the GI viscera was once throught to be impossible because of artifacts created by gas within the lumen but with the technical advancement in the ultrasonography now the problem has been solved. If the animal is kept of feed and adlib water is given to the dog with I/v fluid than ultrasonography becomes helpful in the diagnosis of gastrointestinal tract disorders. Other conditions such as esophageal carcinomas can also been diagnosed by ultrasonographic endoscopy. in human beings.

The normal ultrasonography of the liver, kidney, stomach & spleen in dogs has been standardized and its use in evaluation of pathological lesions has been reported but ultrasonographic evaluation of oesophagus & intestine, both in normal animals and diseased conditions is yet to be established. Therefore normal ultrasonography of the oesophagus & small intestine in dogs and the importance of diagnostic capability of ultrasonography in diagnosis of pathology of these organs have been compiled.

Tikka or Leaf Spot
Cercospora arachidicola/ Phaeoisariopsis personatum
Diagnostic Symptoms
• Disease is caused by two different pathogens, namely, Cercospora arachidicola and Phaeoisariopsis personatum.
• The two pathogens mostly occur on the same leaves.
• The Cercospora arachidicola appears about a month earlier than the Phaeoisariopsis personatum.
• The two pathogens cause symptoms differing each other. Early leaf spot
• Sub-circular dark brown spots having 1 to over 10 mm diameter are produced on the upper leaflet surface.
• Spots are of lighter shade of brown on the lower side of the leaflets.
• Yellow halo is seen around the brown spots.
• Dark brown in colour on the upper leaflet surface where most sporulation occurs and a lighter shade of brown on the lower leaflet surface.

1. Introduction
Medicinal organic chemistry is a branch of chemistry focused on the design, development, and synthesis of organic molecules that can be used as therapeutic agents. It connects biology, pharmacology, and organic chemistry and is essential to the process of finding and developing new drugs. Here are some foundational concepts in medicinal organic chemistry:
1.1. Drug Discovery and Design
Medicinal chemists aim to identify bioactive compounds that can interact with specific biological targets, such as proteins or enzymes, to produce a desired therapeutic effect. The discovery process often starts with lead compounds, which may be found in natural sources (e.g., plants, fungi) or through high-throughput screening of large chemical libraries. Drug discovery and design (Zhong et al., 2014; Patani et al., 1996; Lipinski C. A., 2004) are critical aspects of medicinal organic chemistry, focused on identifying and optimizing chemical compounds with potential therapeutic effects. This complex, multi-step process combines organic chemistry, biology, and pharmacology to create drugs that are both effective and safe for clinical use (Figure 1). Below is a summary of the primary phases: Fig. 1: Drug discovery and development stages from target identification to clinical trials
1.1.1. Target Identification and Validation
The first step in drug discovery is identifying a biological target (Schenone et al., 2013), often a protein, enzyme, or receptor associated with a specific disease. This target must be validated, meaning that it is confirmed as essential for the progression of the disease. For instance, the identification of enzymes that play a role in cancer cell growth can provide targets for anticancer drug development. The list of some targets and their therapeutic application are given in table 1.
1.1.2. Hit Identification and Lead Compound Discovery
After identifying a target, medicinal chemists seek “hit” compounds that show initial biological activity against it. High-throughput screening (HTS) methods are often used to test thousands of compounds from chemical libraries to find potential hits. These hits are then refined to identify “lead” compounds, which exhibit stronger or more specific activity.

6.1 Introduction
The success of design thinking depends on its applicability in industries and service organization. The applications of design thinking applied to product development should focus on the needs of users. The design thinking can also be applied to design new processes as well as improve an existing process.
6.2 Case Studies
The section presents several case studies of applying design thinking in realities as listed below.
1. Design thinking in eye care
2. Design thinking in foundry
3. Design thinking in FMG company
4. Design thinking in auto industry
5. Design thinking at retail outlet
6. Design Thinking in Flight Reservation System
7. Design thinking in winding fabric on roller in textile mill
6.2.1 Case study: Design Thinking in Eye Care
Eye care is a crucial part of health care system. There are many factors that are responsible for poor eye vision. Normally in the early stages, viz. children and adults up to 40 or 45 years of age may have eye power issues, which are managed

Slaughter is an act of killing or destruction of animals for food purpose and includes all processes and operations on all such animals in order to prepare it for being slaughtered. It is an expert act requires expertise and willingness. Slaughter is necessarily to be performed in a slaughter house recognized or licensed by authority empowered under law for the time being in force to do so.  Only authorized animals are to be slaughtered for food purpose and restricted animals or animals prohibited for slaughter should not be converted into meat in any case. Animals in pregnancy, has offspring less than three months or under the age of three months, animals not certified by veterinarian for fitness should never be slaughtered. Slaughterman should also have a valid license or authorization issued by municipal or other authority. The persons below eighteen years of age and suffering from communicable or infectious diseases shall not be permitted to slaughter an animal.

In case of proprietorship business, the individual proprietor generally invests his own savings to start with, and may borrow money on his personal security or the security of his assets from others. Similarly, the capital of a partnership firm consists partly of funds contributed by the partners and partly of borrowed funds. But the company from of organization enables the promoters to raise necessary funds from the public who may contribute capital and become members (share holders) of the company. In course of its business, the company can raise loans directly from banks and financial institutions or by issue of securities (debentures) to the public. Besides, profits earned may also be reinvested instead of being distributed as dividend to the shareholders.

Thus for any business enterprise, there are two sources of finance, viz, funds contributed by owners and funds available from loans and credits. In other words the financial resources of a business may be own funds and borrowed funds.

14.1. Introduction

There is a tremendous need to change the way society produces, and consumes materials to manage the environmental effect in the growing scarcity of resources. To overcome this issue, recycling process could be a great possibility that reduce the uses of natural resources, maximizethe waste utilization and produce least environmental impact. Unfortunately, packaging materials contribute 40% of solid waste in Western Europe, and 33% in US. In fact, packaging waste is likely to increase in transitioning and developing countries. Recycling process consists of collection, sorting, recovery, and management of packaging materials. As per the report of “Eurostat statistics in 2018”,European Union (EU) generates 174.1 kg of packaging waste per inhabitant, Croatia contributes 67.8 kg per inhabitant and Germany produce 227.5 kg per inhabitant.