eChapters

The name Mycoplasma is originated from the Greek word mykes (fungus) and plasma (formed). It was first used by Albert Bernhard Frank, a German Biologist in 1889. He thought it was a fungus. An older name for Mycoplasma was Pleuropneumonia-Like Organisms (PPLO), referring to organisms similar to the causative agent of contagious bovine pleuropneumonia (CBPP). It was later found that the fungus-like growth pattern of M. mycoides is unique to that species. It was first isolated in 1898 by Edmond Nocard and E. Roux from bovine lungs. Whereas, Mycoplasma pneumoniae was considered as a virus previously. Eaton and his co-workers cultured the causative agent of human primary atypical pneumonia (PAP) or "walking pneumonia." It was known as "Eaton's agent." In the early 1960s, Leonard Hayflick, in Philadelphia, was first to isolate and cultivate the causative agent of primary atypical pneumonia and identified the agent as a Mycoplasma and named it Mycoplasma pneumoniae.

Many insect can be observed at any hour of the day. This is proper understanding of the taxonomy and biology. The insect collection, storage and preservation are useful technique of their culture. The best period for collection is from early spring to late rainfall and the best time of the collection of most of the species is during the daytime. The insect are polyphagous and therefore, plants provide one of the best collecting places. Insect can be picked, swept off the plant with the help of a net. Different species feed on different kinds of plant, one should therefore, examine all sorts of plant, flowers weed shrubs and trees. Few insect are only found in the stem, bark, wood, fruit or roots etc. Some species can be found in the leaf mud and litter on the surface of the soil, particularly in woods or areas where the vegetation is dense, others can be found under stones bark etc. other house hold insects may be observed feeding on clothing, furniture, grain, food and other parts of Plant and House and some are aquatic insects.

Generation of new genetic variability through recombination breeding followed by appropriate selection procedure is one of the key factor for crop improvement. Gain in selection is restricted by correlated response of agronomically desirable as well as undesirable characters. There is a host of examples in various crop species where genes for desirable agronomic traits have been found to be closely linked with those governing undesirable characters (Murthy, 1971; Clegg et al., 1972). Such close linkages delay the realization of the full recombination potential in many crops. The biparental mating or the disruptive mating scheme, finds its importance in the improvement of autgamous speice,s because it increases the probabilities of obtaining useful recombinants as compared to selection without intermating (Hanson, 1959; Jensen, 1970).

In contrast to classical pedigree breeding, random mating population could produce large amounts of variability. This variability can be maintained in the population by the use of recurrent intermating, while the population is improved by selection. According to the standard breeding methodology in self-pollinated crops selection for quantitative characters are generally taken up in early segregating generations. For characters like yield, selection is continued till the material becomes homozygous. Such characters are controlled by large number of genes and a very large population has to be raised to make selection effective. Since most plant breeders could never grow the theoretically required size of population, the recombination is highly restricted. It is likely that many of the valuable genes may be practically lost in the process of advancing the material by continued selfing the generations. Andrus (1963) suggested crossing of selected sibs in early generation for reassembling the genes capable of functioning in a balanced polygenic system.

Most of the insect pest and disease (insects, mites, diseases, nematodes, etc.) management problems arise from relying entirely on pesticides for control. Integrated pest management (IPM) is a strategy that draws on a range of management tools with the goal of using the least ecologically disruptive techniques to manage pests within economically acceptable levels. IPM considers the production system in a holistic manner and looks at all aspects of the farming enterprise as potentially increasing or decreasing pest numbers and, where possible, enhancing the activities that reduce these pest populations.

Strategy for Integrated Pest and Disease Management

The basic IPM strategy involves routine crop monitoring to ensure that pesticides are only applied when needed, as well as to ensure appropriate timing of pesticide applications. The most developed bio-intensive IPM relies primarily on beneficial organisms to manage insect pests. When greater pest control is needed, interventions chosen are complementary to the survival of these beneficial organisms. As other pests are incorporated more and more prevention strategies are adopted which reduces the need for direct control practices.

Abstract

This chapter covers how linear programming aids in reducing costs and maximizing gains. A linear programming problem (LPP) typically contains linear restrictions and an objective function seeking optimization. Initially, two-variable linear optimization models are examined using the graphical technique to comprehend the issue and investigate solutions. The graphical method provides visual insights into the problem’s nature and solutions. Linear programming identifies the mix of choices that optimizes the objective function subjected to constraints. Graphical interpretation aids in recognizing feasible and optimal solutions visually.

The term hybrid or hybrid variety is used to designate F1 populations that are used for commercial plantings. Such F1 populations are obtained by crossing clones, open-pollinated varieties, and inbred lines that are genetically dissimilar. Historically the first attempts to make practical use of fortunate mating system of maize came late in the nineteenth century by W. J. Beal in Michigan, stimulated by Darwin’s work on inbreeding and outcrossing. Beal suggested use of F1 varietal crosses to exploit heterosis for commercial crop. The hybrid seed was to be produced by detasseling alternate rows. It was George Harrison Shull (1909) who first suggested a pure line method of corn breeding based on inbred lines obtained by continued self-fertilization and the use of F1 hybrids between these inbred lines for the production of commercial crop. His proposal was to make use of single crosses (hybrids between two inbred lines) based on the superior performance of the hybrids in various combinations between the inbred lines.

Introduction

India is one among the progressive countries in the world in maintaining food and nutrition database efficiently. The country has been in the fore front in signing the resolution on ‘Transforming the World: the agenda for Sustainable Development-2030’. India outstood among the developing countries in food self-sufficiency since seventies with low household hunger rates and low infant mortality rate. In the meanwhile, the country faced double burden of food and nutrition with inadequate dietary intake and under nutrition in one hand and overweight due to low physical activities on the other hand. Rapid increase in population with diminishing food production led to food insufficiency and malnutrition whereas, rapid economic growth and increasing mechanization led to the increasing prevalence of overweight and obesity. Both the under- and over nutrition are associated with health hazards, hence, use of normal body mass index (BMI)would be considered as an indicator for food security (FAO, 2013)

• General considerations

 • Collection

 • Preservation

 • Examination

 • Physical examination

 • Chemical examination

 • Microscopic examination

 • Organized sediment

 • Unorganized sediment

 • Cultural examination

Abstract

The Pudukkottai district located in the southeastern tip of Tamil Nadu, India provides a complex geological setting with three litho-tectonic blocks membered by the hard Crystalline rocks of Archaeozoic-Proterozoic Era in the west,Mio-Pliocene Sandstone/Cuddalore Sandstone in the centre and Quaternary sediments in the east. While the western and central blocks are separated by a well-defined NNE-SSW trending fault, the central Mio-Pliocene Sandstone block is cut into two parts by a N-S fault with western static block and the eastern uplifted counterpart. Besides the above, the various drainage anomalies viz; Annular, Deflected and Eyed drainages and compressed meanders interpreted using the raw and digitally enhanced satellite multispectral data show that the N-S oriented faults with oscillations from NNW-SSE to NNE-SSW, NE-SW and E-W orientations are tectonically active in the area. The integration of these active faults with known geothermal springs and the maxima axes drawn from the contours deducted from the temperature of groundwater measured during the predawn hours from the wells revealed that the N-S and NE-SW faults are the probable locales for geothermal resources in the study area. Thus the study demonstrates a newer methodology for locating the geothermal prospects.

Abstract

The term nano technology, buzzword of present day science owes its origin from the Greek word ‘nano’ literally meaning dwarf. It is expressed in terms of dimension one nanometer equals to one billionth of a meter (1nm=10-9m), work on the principle of particle movement, smallest particle accelerate fast in the system. The nano technology deals with manufacturing, study and manipulation of matter at nano-scale (or atomic scale) in the size range of  1-100 nm, called as nanoparticles (Rajan, 2004). Nano technology is one of the most fascinating and rapidly possessing potential to revolutionize in science and technology of medicine and agriculture. In plant pathology, nano technology has potential scope to detection, diagnosis and management of plant diseases. Micromechanical cantilever arrays for selective immobilization and fast quantitative detection of vital fungal spores (Nugaeva et al., 2005). Micro-fabricated chambers designed to mimic some of the features of xylem vessels and discovered that Xylella fastidiosa migrates via type IV pilus-mediated twitching motility (Meg et al., 2005). Antifungal properties of chitosan, chitosan-saponin and Cu-chitosan nanoparticle reveal against phytopatogenic fungi namely Alternaria alternate, Macrophomina phaseolina and Rhizoctonia solani (Sharan et al. 2013). 

The muscles of fore limb (Fig. 5-3 A and B) are distributed in different regions of fore limb as muscles of shoulder girdle, shoulder, arm and those of forearm and manus. By means of the muscles of shoulder girdle the forelimb is attached with the trunk of the body by synsarcosis and bears the weight of the body. The rest of the groups of muscles act on different joints of the fore limb as extensors or flexors of these joints. The group of muscles acting on these joints originates on the bone of the proximal segment and insert on the bone of distal segment of the concerned joint.

Muscles of shoulder girdle

The muscles of shoulder girdle have been described with the muscles of thorax.

Muscles of shoulder

The muscles of shoulder arise on the scapula, act on shoulder joint and end on the humerus. These muscles are in two groups as the lateral group of muscles and the medial group of muscles.

4.1. Downy mildew of sunflower

Pathogen: Plasmopara halstedii (Fort.) Berl.& de Tom.

Hosts

Over 100 host species from a wide range of genera in the family Asteraceae have been reported susceptible to this pathogen, including wild and cultivated species of Helianthus, e.g. sunflowers, which is the principal economic host. Wild Asteraceae hosts (e.g. species of the genera Helianthus, Artemisia, Xanthium, etc.) may also occur widely in the corresponding areas but their potential as reservoirs of the pest is not yet known (Virányi, 1984). For lists of hosts see Leppik (1966) and Novotel’nova (1966).

Geographical distribution

EPPO region: Present wherever sunflowers are grown, in Albania, Austria, Bulgaria, Czech Republic, Egypt, Estonia, France, Germany, Hungary, Italy, Moldova, Morocco, Poland (unconfirmed), Romania, Slovakia, Spain, Switzerland, Turkey, Russia (European, Siberia), Ukraine and Yugoslavia.
Asia: Azerbaijan, China, Georgia, India, Iran, Iraq, Israel, Japan, Kazakhstan, Pakistan, Russia (Siberia), Turkey. 
Africa: Egypt, Ethiopia, Kenya, Morocco, Zimbabwe, Uganda.

Abstract

This chapter discusses the concepts of risk and uncertainty in decision-making. Risk refers to the condition where the decision-maker knows the possible outcomes and their probabilities. Uncertainty refers to the condition where such information is unknown to the decision-maker.

Introduction “Xenobiotics” are “foreign compounds,” which are alien to the organism and removed from their natural environment. Xenobiotics are substances that are either alien to an organism or do not form a natural part of its diet. Compounds including pharmaceuticals, food additives, & environmental toxins are examples of xenobiotics. Normally, these substances are removed from the body by being broken down into compounds and then being expelled through the kidney, bile and lungs. For the pharmaceutical business, enzymes that metabolize xenobiotics are crucial because they are in charge of breaking down medicines. Similarly, xenobiotic transporters influence how long medications remain in the body.

Abstract

A field experiment was carried out during rabi 2012-13 at Bihar Agricultural College farm, Sabour, Bhagalpur to assess the effect of different herbicides on microbial population dynamics of soil in winter maize (Zea mays L.). The experiment comprised of ten weed management treatments involving various herbicides (acetochlor @ 1.125, 2.25 and 4.5 kg a.i. ha^-1, atrazine @ 1.0 kg a.i. ha^-1, pendimethalin @ 0.5 kg a.i. ha^-1 + atrazine @ 0.5 kg a.i. ha^-1, alachlor @ 0.5 kg a.i. ha^-1 as pre-emergence and 2,4-Diethyl ester @ 0.6 kg a.i. ha^-1and topramezone @ 0.04 kg a.i. ha^-1+ atrazine @ 0.25 kg a.i. ha^-1 as post-emergence including weed free and weedy check laid in randomized block design with three replications. Results indicated that all the herbicides’ treatment showed significant adverse effect on microbial population in rhizospheric soil of winter maize up to 45 days after sowing. Further, there was reduction in soil microbial population occurred in all the herbicides treated plots up to said time period as compared with weed free and weedy check. Initially the soil microbial population in weed free plot was much higher than that of weedy check, however, it was found in reverse trends in rest of the time intervals as well as harvest. Thereafter, soil microbial population was gradually increasing at different time intervals and at harvest, their population increased considerably in herbicidal treated plots though the weed free and weedy check showed higher soil microbial population than other herbicide treated plots.

17.1 Modules

• A module is a file containing python definitions and statements.

• A python module is (.py file) containing variables, class definitions, statement and function related to a particular task. The major feature of having module is that its content can be reused in other programs, without having to rewrite or recreate them.

• They are executed only the first time the module name is encounter in an import statement.

Type of modules:

• User defined modules

• Built-in modules

Ex.-array, math, numpy, sys, etc.

In simple words, Organisational Behaviour is the study of Individuals and Group behaviour within an organisation and indicates how these interactions affect an organization's performance toward its goals. It also examines the impact of various factors on behaviour within an organization and help in understanding and predicting organisational life.

Organizational Behaviour is a 'Specialised Stream' drawing inputs from multiple academic domains such as psychology, sociology, political science, anthropology, science, economics, and technology to name a few.

Introduction

Sem (Dolichos) bean, Hyacinth bean or Field bean is one of the most ancient crops among cultivated plants. It is a bushy, semi-erect, perennial herb, showing no tendency to climb. It is mainly cultivated either as a pure crop or mixed with finger millet, groundnut, castor, corn, bajra or sorghum in Asia and Africa (Maass et al., 2010). It is a multipurpose crop grown for pulse, vegetable and forage. The crop is grown for its green pods, while dry as well as fresh green matured seeds are used in various vegetable food preparations, as most of the nutritive value is concentrated in the seeds. FAO website reports that Dolichos lablab (field bean) is a dual purpose legume. It is traditionally grown as a pulse crop for human consumption in south and south-east Asia and eastern Africa. Flowers and immature pods also used as a vegetable. It is also used as a fodder legume sown for grazing and conservation in broad acre agricultural systems in tropical environments with a summer rainfall. Also used as green manure, cover crop and in cut and carry systems and as a concentrate feed.

Protected cultivation can be defined as a cropping technique wherein the micro-climate surrounding the plant is controlled partially or fully as per the requirement of the plant species during their growth period. This cropping technique is the most modern approach to grow different horticultural crops mainly, vegetable crops and flowers for enhancement of both productivity and product quality. This technology has spread extensively the world over in the last few decades. This technology involves the cultivation of different crops particularly, horticultural crops in a controlled environment wherein the environmental parameters like the temperature, humidity, light, soil, water, plant nutrition, etc. are manipulated for enhancement of production as well as product quality even during off-season which ensures additional return to the growers.

Innate immunity provides the first line of defense against invading pathogens. But if the pathogens are able to escape from the first line of defense mechanisms, the body uses, another set of immune mechanisms which provide defense in a more specialized manner. These are called second line of defense mechanisms. The second line of defense mechanisms are highly specific in nature. These are called adaptive immune response and provide adaptive immunity. It is also called acquired immunity since these immune responses are not present prior to the exposure of the microbes. When the body is exposed to foreign substances or microorganisms, body develops adaptive immune responses. Adaptive immunity is a set of specialized cells and processes that function to eliminate pathogens or prevent their growth.