eChapters

Steam is utilized in steam power plants, steam engines, atomic power plant, and food industry for pasteurization, sterilization, textile industry, paper industry and in railway to generate power. Steam is also utilized in process type industries like sugar industries, textile industries, chemical industries for sizing and bleaching. Steam is also employed to store energy and transported through pipes.

1. The soils best suited for leafy vegetables are:

a) Clayey soils

c) Sandy soils

b) Well drained loamy soils

 d) Any type of soil 

2. How long does itgenerally take for leafy vegetables to grow?

a) 35-50 days after sowing

 b) 100-120 days after sowing  

c) 90-95 days after sowing

 d) 50-60 days after sowing   

Introduction

For proper and efficient experiment to be conducted, experimenters need so many chemicals to deal with. This includes different acids, base, salt, different kind of indicators and so on. Some of these chemicals are safe for health, but some of them are dangerous to health when come in close proximity to our body while some of the chemicals cause health issues on inhaling. These may cause improper functioning of some of our physiological activities. Acids and bases are very dangerous for our tissues when come in our contact. These may cause serious respiratory problem in addition to injuries on coming to our contact. Some chemicals are exploratory yet they may cause even death of the person working with them in laboratory. Therefore, mere use of the chemicals in laboratory is not only the objective of the experimenter. The person working in laboratory should also be concerned about the proper use and handing of the chemical while working with it. Thus, every researcher of an institution who has to work with chemicals in a laboratory should be made aware about the chemicals to be used in the laboratory and the consequences if any mishandling of a laboratory chemical occurs. Not only these, suitable precautionary measures should also be known to the researcher along with ensuring the availability of the required safety equipment/installations. Hence, a proper understanding of the ways of handling of chemicals in a laboratory is of prime importance for the personals like you who are working or have to work in laboratory.

Safe Handling of Chemicals in Laboratory

Safe use/handling of chemicals in laboratory include minimized exposure to chemicals, maintaining safety data sheets, proper labelling, storage, segregation, and transport of chemicals for personal hygiene.

Nutrient adsorption in soil is one of the important phenomena in terms of nutrient availability to plants. Due to the nutrient fixation of the added nutrients supplied through fertilizers or manures may result the increase in cost of production due to the non-availability of the added nutrients at the optimum level to the plants. Hence, management options are required to release the sorbed nutrients from soil for better availability to the plants. The ion-fixation is driven by physico-chemical and biological processes and varies under agro ecological situations. The chemistry of ion fixation in the form of specific or non-specific adsorption on soil colloids will help understanding the bonding and adsorption reactions of ions in the soil.

8.0 What is fixation?

Fixation of plant nutrients in soil may be defined as the process, where readily soluble plant nutrients are transformed into less soluble forms by physical or chemical reaction with organic or inorganic compounds and thus restricting the mobility of ions in soil that leads to the decrease in availability to the plants. There are two kinds of fixation in general, viz; cation (N, K, Fe, Mn, Cu, Zn, Ca,Mg etc.) and anion (P, B, Mo etc.) in soils. The fixation of ions in soil is governed by important physical and chemical parameters of soil based on which the available pools of nutrients for plants may be determined.

A DNA microarray is a multiplex technology used in molecular biology. It consists of an arrayed series of thousands of microscopic spots of DNA oligonucleotides, called features, each containing picomoles (10-12 moles) of a specific DNA sequence, known as probes (or reporters).

Keeping pace with latest technologies Central Institute of Freshwater Aquaculture (CIFA) has attempted to develop the following three databases on the following aspects for quick retrieval of information resources. The brief description of the databases is presented below for easy comprehension.

CD-ROM Database on Socio-Economic Aspects of Carp Culture in Kolleru Lake (Pictorial)

In the era of 21st century world is progressing fast towards the electronic media of communication and the real revolution has been brought about in the information technology. It has revolutionized the collection, storage and retrieval of information very speedily and accurately. One of the IT tools like CD-ROM (Compact Disc Read Only Memory) plays an important role in storing the huge data and can be easily carried to remote places. Since it is lightweight, pocket sized and can hold about 660 megabytes of data which is equivalent to 3 lakh pages. CD-ROM is a high capacity optical disc. It is 12 cm diameter, made of durable plastic with a reflective metal coating and lacquered surface. Considering all these advantages an attempt has been made to develop a database on socio-economic aspects of carp culture in Kolleru Lake which is immensely helpful to all scientific and farming community (Roy et al., 2004).

Although in vitro rumen studies of digestibility determination simulates rumen fermentation to some extent, it is almost impossible to incorporate all dynamics of rumen environment in these techniques. Therefore, the in situ Dacron bag technique was developed as an alternative to the in vitro rumen studies (Ørskov and McDonald, 1979). This technique involves placement of feedstuffs in bags made of indigestible fabrics such as nylon, Dacron or silk, directly in the rumen. The loss of dry matter or of any feed component after specific incubation period are measured gravimetrically to determine the rate and extent of degradation.

This technique is widely used, but the procedure differ among the laboratories.Improved methods utilise bags of specific pore size and control the ratio of sample weight to surface area of the bag.Bags with a large ratio of surface area to sample size minimise the error.Optimum pore size is about 40 microns. Smaller pore size retards the entry of organisms and thus inhibit optimum fermentation while larger ones permit transit of lignified particles.

Mass Communication

The term ‘mass communication’ was coined at the end of the 1930s. The term ‘mass’ denotes great volume, range or extent (such as of people or production), while ‘communication’ refers to the giving and taking of meaning, the transmis- sion and reception of messages.

The term ‘mass’ was first formally defined by Herbert Bhumer (1939) as a new type of social formation in modern society, by contrasting it other formations, es- pecially the group, crowd and public.

Gerbner’s (1967) definition of mass communication is hard to beat. He defined it as social interaction through messages.

Mass communications comprise the institutions and techniques by which special- ized groups employ technological device (press, radio, films etc.) to disseminate symbolic content of large, heterogeneous and widely dispersed audience.

Coconut is a monocotyledonous woody plant belonging to the family Arecaceae or Palmae. It is presumed that the generic name Cocos and popular name coconut are derieved from Spanish word ‘Coco’ meaning “Monkey face” a probable reference to the three scars on the base of the shell resembling two eyes and a nose of monkey face. Coconut is valued most for its nut, the other components are coconut water, kernel, shell and husk. Coconut water is one of the most refreshing drinks which is also known for its medicinal value. It increases blood circulation in kidneys, causes profuse diuresis and eliminates mineral poisoning. It is a good substitute for saline glucose under gastroenteritis conditions. The coconut has been regarded as Kalpavriksha (tree of heaven) because all the parts of the palm is useful to mankind in one way or the other.

The dried kernels commonly called as copra is richest source of vegetable fat i.e. 60 to 67% oil. Coconut is major source of edible oil and it is propagated through seeds. India is largest producer of coir and its product. The coconut plant has about 4-6 years of juvenile phase with 60 years of productive life.

The screwpines are tropical shrubby plants grown for the highly scented flowers or the ornamental foliage. The ornamental foliage types are generally cultivated in the green house and protected from direct sun. The variegated types loose the colour in a rich soil and hence should be grown in a rather poor soil containing just sufficient nutrients and moisture. Some species are good for potting and indoor decoration. The common screwpine is used as a hedge also (Randhawa and Mukhopadhyay, 1986)

The screwpine (Pandanus), is highly polymorphic with numerous forms and varieties and selected in various countries for specific uses as maintained by vegetative propagation, e.g. P. leram (Plate 14), the Nicober-bread fruit, is grown in the Andaman Islands for its edible fruit providing a starchy food that is enjoyed locally; another species, P. utilis (Plate 15), on the remote Island of Mauritius, provides fibre from the leaves, used in making bags and a species from Polynesia, P.veitchii (Plate 16) is most commonly grown in green houses and outdoors as an ornamental, where the winter weather is mild and in the species the prop roots and branching stems are particularly well developed attracting attention from many people who might not otherwise notice the stranger from the tropics (Lorus and Milne, 1967). However, these three species give a striking foliage effect and especially useful in seaside gardens as P. utilis with green leaves; P. veitchii with banded white and P. leram with even longer leaves (Thomas, 1965). An unarmed form, forma laevis warb., is cultivated for the fragrant bracts of the inflorescence, while forma samak, a group of prickly Pandanus, is preferred for the tough leaves suitable for matting; another form with longitudinal yellow bands on leaves (forma variegatus) is grown for ornamental purposes (Deshaprabhu, 1966; Ambasta, 1986). In the Pacific Islands, some of the forms (e.g pulposus) are cultivated for their edible fruits (Purseglove, 1975; Ambasta, 1986). Burkill (1966) states that the common wild armed form of the sea-coasts was var. littoralis and that flower growers had selected various races for cultivation, which included the prickly var. samak and thronless var. laevis, grown in India, Malay and Indonesia, are used for making mats.

Planned Strategies for Rural Development in India

The Food and Agriculture Ministry appointed a Committee to examine the Grow More Food activities of the Government which were in implementation and to suggest measures for ensuring rapid expansion of agricultural production. The Grow More Food Campaign Inquiry Committee pointed out that there was imperative “Need of an organisation for intensive rural work which would reach every farmer and assist in the coordinated development of rural life as a whole similar in conception to the “extension” or “advisory’” services in the U.S.A., the U.K. and elsewhere.” One of the recommendations of the Committee was that an extension agency should be set up for rural work, which would reach every farmer and assist in the coordinated development of rural life. The Planning Commission set up the Government of India in 1950 to formulate the First Five Year Plan summarized the reasons for failure of the earlier efforts by the governmental and voluntary organisations as follows

1 The best age for transplanting of brinjal seedlings is: 

 a) 4-5 weeksold b) 1-2 weeksold

 c) 8-9 weeksold d) 10-12 weeksold

2 The recommended seed rate of tomato is: 

 a) 100-200g/ha   b) 1-1.2 kg/ha 

 c) 500-600g/ha   d) 33-4 kg/ha 

3 The best time for sowing tomato is: 

 a) September to October b) Mid-March to April 

 c )  Mid-December to January d) August to September  

Introduction 
The mandate of the University under section 30 of the Act of 1963 is for establishment of Extension services for the purposes of under taking extension programs, dissemination of information for solving of problems relating to agriculture and domestic fields, developing the interests of youth in agriculture etc., The first extension service of APAU popularly known as District Extension Education Programmes were introduced in 1967 in Hyderabad district and were subsequently extended to Chittoor(1968)and Guntur (1970) districts. National Demonstrations Scheme (NDS) was established during 1970-71 in the University in four locations. In commemoration of the Golden Jubilee Year of ICAR, a Lab to Land Programme was launched by the APAU in June,1979. In order to improve the productivity of pulses and oilseeds in different regions of the state, two extension education centres were sanctioned by the ICAR at Ananthapur and Rastakuntubai which started functioning from December,1980 and December,1981 respectively. Reorganization of the University Extension work followed the reorganization of research activities of the APAU and implementation of Training and Visit System by the Department of Agriculture to streamline the setup of the field extension program of the University during 1982. To optimize the utilization of available extension resources, the resourcess of District Extension Education programs, extension services around research stations and NATP were integrated and reorganized to form six Extension Education Units. The extension activities of these units were entrusted with the respective Associate Directors of RARS for integrating research and action activities. The Associate directors of Research in turn were made responsible to the Director of Extension. The Extension Education Units conducted different extension activities like organization of field trials for testing new technologies for their feasibility including minikit trials of pre-released varieties to get feedback to the scientists, introduction of new cropping patterns, demonstration of latest technologies through early demonstrations including educational activities like organization of Kisan Melas training programs for the developmental

1) Origin and distribution

Pearl millet (Pennisetum americanum (L) Leeke, 2n-14) originated in west Africa from where it was introduced into India. Large variability is still found in Africa. Pearl millet is a dual purpose crop; its grain is used for human consumption and its fodder as cattle feed. It is cultivated mainly in Africa and Asia, primarily as a grain crop in an area of 26 million ha with a production of 13 million tonnes. As a poor man’s bread, it sustains a large population of Africa and Asia. It also contributes to the economy of countries like the U.S.A. where it is grown as a forage crop.

In India, Pennisetum americanum (bajra) is cultivated on 11 to 12 million ha land with a production of about 6 million tonnes. It is grown on marginal lands and in areas of scanty rainfall. Rajasthan, Gujarat, Maharashtra, Uttar Pradesh and Haryana account for about 90 per cent of the total area under this crop.

Evolution of Panchayati Raj System in India

In January 1957, the Government of India appointed a committee under the chairmanship of Balwantray Mehta to examine the working of the Community Development Programme (1952) and the National Extension Service (1953), and to suggest measures for their better implementation. The committee expressed concern about the lack of participation of people in these programmes and made a string plea for devolution of power. The committee submitted its report in November 1957 and recommended the establishment of the scheme of ‘democratic decentralization’ through a three-tier system of local government from village to district Level-Gram Panchayat at village level, Panchayat Samiti at block level and Zilla Parisad at district level -which ultimately came to be known as Panchayati Raj in India. The recommendations of the committee were accepted by the National Development Council (NDC) in January 1958. The NDC did not insist on a single rigid pattern of panchayat raj system throughout the country but left it to the states to evolve their own patterns suitable to local conditions. But the basic principles and broad fundamentals of democratic decentralization remained identical throughout the country. Thus, the Panchayati Raj system came into existence in 1959 with two basic objectives. These were (1) democratic decentralization and (2) local participation in planned programmes. The new system of Panchayat Raj Institutions was first adopted in Rajasthan and Andhra Pradesh in 1959, followed by Assam, Tamil Nadu and Karnataka in 1960, Maharashtra in 1962, and Gujarat and West Bengal in 1963 and 1964 respectively. By the mid-sixties, the hype to strengthen the Panchayati Raj Institutions (PRIs) gave way to a growing tendency of centralization and the PRIs descended to ground zero. To revive the working of PRIs, the Janata Government in 1977 appointed a committee headed by Ashok Mehta to study the functioning of PRIs and to suggest measures for improvement. The committee suggested a minor change in the Balwantray Mehta Scheme. Mehta (1978), in the Report of the Committee of Panchayati Raj Institutions (PRIs) identified three phases of Panchayati Raj in India

The speed with which changes in the eye can take place is challenging. Ophthalmic problems do not lend themselves to casual examination or ‘trial and error’ therapy. Therefore, to perform safe cataract surgery with good quality outcome, uniform minimum standard of diagnostic and clinical practice needed to be in place.

Although cataract can be diagnosed by routine gross examination ofthe affected dog even then it is mandatary to develop a routine ophthalmic examinations in a consistent and organized manner to make a confirmatory diagnosis and plan the surgical technique for a favourable prognosis. A sequential examination starting right from history up to electroretinography may be performed as under:

History » Gross Examination » Menace response test » Obstacle course test » dazzle or photic blink reflex » Light induced pupillary reflexes (direct/ consensual) » Corneal reflex test »Schirmer’s tear test

Introduction

Proteins are complex biomolecules composed of amino acids, playing crucial roles in virtually all biological processes. They serve as enzymes, hormones, structural components, signaling molecules etc.

Structure/ Levels of Organization of Proteins

Generally, Proteins are polymers of L-alpha amino acids, linked by peptide bonds. The sequence and structure of these amino acids determine the protein’s function. Protein structure is hierarchically organized into four levels:

1. Primary Structure

• The linear sequence of amino acids in a polypeptide chain, determined by the genetic code.

2. Secondary Structure

• Local folding of the polypeptide chain into structures such as α-helices and β-pleated sheets, stabilized by hydrogen bonds.

Genetic Classification of Poultry

Understanding the genetic classification of poultry is essential for breeders and farmers to optimize the performance and standards of different commercial breeds. Here’s a detailed overview:

Evolutionary Background

• In the process of evolution, cold-blooded (poikilothermic) reptiles are considered the ancestors of birds.

• Birds are warm-blooded (homeothermic) feathered creatures adapted for hot and dry climates in their terrestrial habitats.

Chromosomal Categories

• Sex Chromosomes: Carry genetic material that determines the sex of an offspring.

• Autosomes: Non-sex chromosomes that carry the bulk of genetic information.

Section 3.1 Biotechnology Patents – Scope and Controversies
3.1.1 Introduction
Biotechnology, a field at the intersection of biology and technology, generates innovations that are often groundbreaking and commercially significant. As such, patents have become a vital tool in protecting biotechnological inventions. However, the unique nature of biological materials and living systems presents unprecedented legal, ethical, and commercial challenges, sparking ongoing debates globally. This section delves into the scope of patenting in biotechnology and explores the controversies surrounding such patents.
3.1.2 Scope of Biotechnology Patents
Biotechnology patents cover a wide array of inventions that are novel, non-obvious, and industrially applicable. These may include:
1. Genetic Materials and Constructs
• Isolated DNA/RNA sequences, including genes and promoters
• Synthetic nucleic acids and gene editing tools (e.g., CRISPR-Cas systems)
2. Microbial Inventions
• Genetically modified microorganisms (GMMs) for bioremediation, fermentation, or synthesis of pharmaceuticals