eChapters

Mangrove forests are ecologically significant and economically important (Kathiresan 2018). They provide ecosystem services worth at least US$ 1.6 billion each year and support coastal livelihoods worldwide (Costanza et al. 1997). They serve as the nursery, feeding and breeding grounds for crabs, prawns, molluscs, finfish, birds, reptiles and mammals. A large amount of global fish catches (up to 80%) is dependent on mangroves, thereby ensuring the food security of coastal people (Ellison 2008). The mangroves provide firewood, timber, cattle feed, honey, medicines and tourism development. They protect groundwater aquifers from seepage of seawater, thereby ensuring water security for coastal population. Mangrove forests remove coastal pollution particularly toxic heavy metals. They offer coastal protection against the fiery effects of natural calamities such as tsunami, storm surges, cyclone and floods (Kathiresan and Bingham 2001; Kathiresan and Qasim 2005; Kathiresan and Rajendran 2005). The potential of mangroves in carbon capture and sequestration is remarkable in mitigating the impacts of global warming and climate change (Kathiresan et al. 2013, 2014).

Apple (Malus domestica Borkh) is a typical temperate fruit; more than 80% world supply is being made from Europe (Tukey, 1982). It occupies more than 85% area and 60 % production of total temperate fruits. As per 2017-18 statistics it was cultivated over an area of 30,1000 ha with 23,27,000 metric tons production (Anonymous, 2018). Austria is leading in apple productivity; however, China is a largest producer in world.

Biostimulants examines substances and microorganisms that enhance plant physiological processes, growth, development, and tolerance to environmental stress. The chapter distinguishes non-microbial and microbial biostimulants and discusses plant extracts, protein hydrolysates, animal-derived hydrolysates, humic substances, seaweed and macroalgal extracts, and secondary metabolites. Microbial examples include nitrogen-fixing and nutrient-solubilizing organisms, arbuscular mycorrhizal fungi, Trichoderma, Bacillus, Pseudomonas, microalgae, and cyanobacteria. Their implications for germination, metabolism, root development, crop quality, growth promotion, and abiotic-stress tolerance are described. The chapter provides a framework for understanding biostimulants as complementary tools within sustainable crop production and natural farming systems. in modern sustainable crop production for farmers worldwide under diverse agricultural production conditions.

Since a method to cultivate VAM fungi in pure culture is not available as yet, clean and high quality VAM inoculum production is not possible. However, VAM technology is gradually getting a place in agriculture as well as reclamation and afforestation programmes. The inoculum currently being used includes infested fields soils, sievings from such soils, soil and roots of greenhouse plants, or pot culture inoculum derived from surface disinfected spores of a single VAM fungus on a host plant grown in a sterilized growth medium. Attempts are being made to manipulate VAM fungi, rooting media, hosts and fertilizers in order to secure superior quality of inoculum by these methods on a large scale. In addition, other techniques like tissue culture, hydroponic system etc. are also being attempted to cultivate VAM fungi in pure culture. The Indian mycorrhizasts have also attempted to devise and develop improved methods for production and storage of commercial VAM inoculum. The following description gives an account of Indian work related to production and storage of consistently high quality disease free VAM inoculum.

Silage fermentation is a complex process involving biochemical changes by microbial populations and the ensiling environment. The chemistry and microbiology of silage fermentation are linked, but the microorganisms are the dominant factor in the fermentation process, and they have the main influence on the quality of the end product. Many species of microorganisms are involved in the fermentation process, and their relative importance varies according to the prevailing conditions. As these conditions change during the fermentation process, the microorganism population changes accordingly. Lactic acid bacteria and clostridia are two main categories of microbes responsible for biochemical changes in silage.

Wilt

Fusarium oxysporum f. sp. lentis

Economic Importance

• The disease is present in countries such as India, Jordan, Nepal, Pakistan, Syria, Turkey, Russia, France, Hungary, Ukraine, Egypt, Ethiopia, Morocco, Sudan, Tunisia, Canada, Argentina, Chile and Uruguay etc.
• It may cause 5-10% yield losses but sometimes severe damage may result complete crop failure under favorable conditions.

ABSTRACT

A plant grows in a highly competitive environment. It is continually being threatened by other plants encroaching upon the space from which it draws its sustenance, by microorganisms, by insects, avian, reptilian or mammalian herbivores. In order to survive, each plant must draw upon a complex of defenses, which may be physical, such as Spines or Leathery Leaves or Chemical. These defenses are passive, coming into action only when the plant is attacked which repel insects or the herbivores that attempt to feed on them. Plants protect themselves from insect attack by providing a multitude of repellent chemicals including toxic and bitter alkaloids and tannins. Non-specialist insects and other animals that attempt to feed on the plant may be repelled, injured through severe gastrointestinal malfunction or even killed. The cabbage, spinach, mustard etc. are well known for their mustard pungent flavor that deters most animals from consuming it. Even most medicinal plants like Cynanchum collialatum of the family Asclepediaceae have tannins or alkaloids like “cardenolides” that repel most animals and insects. All these plants have a basic enzyme “Myrosinase” which react with these specific tannins to produce the toxic metabolite, which repels insects and animals. But caterpillars of few insects are known to tolerate these toxic alkaloids (ex: caterpillar of Striped Tiger Butterfly-Danaus genutia) and in turn sequester the toxic alkaloids into their tissues making themselves non-palatable to their enemies. We hypothesize the analysis of possible roles of toxic alkaloids isolated from these butterflies as bio-insecticides

Nursery

Nursery is a place where seedling, saplings or any other planting materials are raised, propagated, multiplied and sold out for planting. The prerequisites of a successful and remunerative fruit production are the availability of true-to-type, healthy and good quality planting materials. Setting up of a fruit nursery is a long term venture and requires careful planning and expertise, because mistakes committed initially cannot be rectified easily and may adversely affect the return from the investment. Thus, one should pay due attention on every aspects when nursery is to be established.

3.1. Soil colloids

Clay fraction of the soil contains particles less than 0.002 mm in size.

Particles less than 0.001 mm size possess colloidal properties and are known as soil colloids.

Manures are the plant and animal wastes that are used as source of plant nutrients. They release nutrients upon their decomposition.

Bulky organic manures contain small percentage of nutrients and they are applied in large quantities. e.g,. farmyard manure, compost, green manures.

Scenario of Bioinputs reviews the broader market, production, consumption, and regulatory context surrounding bioinputs, with particular attention to biopesticides. The chapter discusses global availability and registration, major categories, market outlook, research needs, and industrial support. It then examines production infrastructure and consumption trends in India, including contributions from government organizations, agricultural institutions, private companies, and local laboratories. State-wise patterns and regulatory considerations are also addressed. By combining technical agriculture with market and institutional perspectives, the chapter helps readers understand the evolving bioinput sector, its production ecosystem, policy environment, commercialization potential, and opportunities for expanding sustainable crop-protection technologies. for stakeholders today.

• What is Intelligence?
• What is Artificial Intelligence?
• Branches of AI
• Natural–Language
• Natural Language Processing 
• Natural Language Recognition
• Simple Natural Language Grammar
• Intelligent Technologies in Agriculture
• Intelligent Animal Houses
• Agricultural Robots

Introduction

The area under salt-affected soils in India is estimated to be 6.73 Mha spread over a number of states across the country. This 6.73 million ha are lying barren or produce very uneconomical yields of crops due to excessive accumulation of salts. These soils are agriculturally unproductive because of the high content of soluble salts which had harmful effects on plant growth due to moisture stress and toxicity/deficiency of some of the ions and the exchangeable sodium ions in clay complex lead to the unfavorable physical conditions of for the plant growth and water movement (Bhumla 1977). Saline and sodic soils have excess concentration of either soluble or exchangeable sodium, calcium and magnesium primarily in the form of chlorides and sulphates. Salt affected areas an expected to increase with spread of waterlogging and salinity due to increase in canal irrigation, and intensive exploitation of poor quality ground waters for agriculture in non canal commands. Certain states like Rajasthan and Haryana located in the western part of the country are endowed with 84 and 62% of poor quality ground waters, respectively. Continuous use of such waters for irrigation to agricultural crops is bound to increase the problem of salinity and sodicity in India (Yadav 1989; Minhas and Bajwa 2001). Introduction of irrigation without making proper provision for drainage is the major cause for the development of salinity in canal commands.It is severe on irrigated lands of the dry zone. It reduces crop yield and in severe cases causes complete abandonment of agriculture (Joshi and Dhir 1989; Joshi et al. 2000; Mahesh Kumar et al. 2016). The present paper deals with extent, causes, characteristics and management options of these soils for sustainability of agriculture in the area.

Introduction

In India out of the total 142 million ha of arable land around 67 per cent of them are affected by some form of land degradation due to development of salinity/sodicity or acidification, erosion by water or wind or chemical contamination. Frequent use of tillage operation under conventional cultivation system particularly in rolling terrain is one of the major causes of land degradation through accelerated water and wind erosion. The basic purpose of primary tillage operations are to control weeds, increase the availability of nutrient to plant through accelerated mineralization of organic matter, and to keep the field clean and pulverized for ease of sowing of the next crop. However the bare and pulverized top soil made them vulnerable to accelerated soil loss through runoff and also to erosion loss of soil by wind in drier agro-climatic regions. Besides soil loss, conventional tillage operation breaks the soil aggregates and exposes the soil organic carbon locked inside the aggregates to accelerated microbial degradation and thus results in net loss of organic carbon from the arable ecosystem.

ALL MOLECULES MOVE CONTINUOUSLY BY SIMPLE DIFFUSION

Heat energy causes molecules to move randomly (sometimes called Brownian motion)

If the concentration of molecules is different in 2 regions (this produces a concentration gradient), diffusion will cause molecules to move from a region of high concentration to one of low concentration

The higher the concentration gradient the more rapid the net diffusion

Diffusion evens out the concentrations so they are equal everywhere (maximum entropy)

If 2 different substances have the same concentration gradient, usually one will move faster than the other

Differences in speed between molecules with the same concentration gradient are given in terms of diffusion constants

A substance with a high diffusion constant moves faster than one with a low diffusion constant

In general, large molecules move slower than small molecules

Diffusion across a membrane is called permeability, and membrane diffusion constants are called permeability constants

Abstract

The landslides that swallowed the whole of Malin village, Maharashtra on the early morning hours of 30 July, 2014 is one of the major disasters, next only to Kedarnath episode in the recent years. Consequently, the Department of Science and Technology, New Delhi, constituted an expert committee comprising the authors of the article which made a visit and took the on the spot assessment of the disaster. Their observations show that the area is covered by the Deccan basalts, which are layered with compact and vesicular basalts; fractured and jointed basalts due to tectonics and the cooling of the basalts; and have also undergone extensive geomorphic evolution. Due to such geologic/geomorphic setting, the flow layered basaltic hillock in which Malin is located is naturally benched, which is further being leveled for the agriculture purposes. The deforestation, leveling of the hills, excessive usage of water for irrigation and the lack of drainages outlet in such benched and leveled slopes have assigned high degree of landslide vulnerability to the area. Over this, when torrential rainfall occurred in the last week of July, the landslide was triggered. On the basis such inferences, some mitigation measures have been evolved after the visit.

Even while the world is ageing, it is not prepared for it. There are 962 million people over 60 in the world as of 2017 with 310.0 million of them living in wealthy countries and 652.2 million in developing ones, according to data from the UN's Department of Economic and Social Affairs (DESA-UN 2017). According to projections, there would be 2.1 billion seniors worldwide by the year 2050 (rich countries: 421.4 million, developing countries: 1670.5 million). By 2030, 80% of the old people in the globe will live in developing countries (DESA-UN, 2015). Elderly individuals in rural developing countries confront challenges such as the lack of pension coverage, work difficulty and high medical costs. Their poor diets and deteriorating poverty raise their risk of chronic illnesses like diabetes, heart disease and cancer (Marshall et al., 2001). 

Use of Antimicrobial Agents

The most frequently used classes of antimicrobial drugs in animals include tetracyclines, sulfonamides alone or in combination with potentiators, quinolones particularly fluoroquinolones, aminopenicillins alone as well as in combination with potentiators, first- and second-generation cephalosporins and also third- and fourth-generation cephalosporins, macrolides, and glycopeptides [1]. The “Terrestrial Animal Code”, issued by the Office International des Epizooties (OIE) in 2022 represents recent guidance for the responsible and prudent use of antimicrobials in veterinary medicine [2]. It describes the respective responsibilities of the competent authority and stakeholders in all processes pertaining to veterinary antimicrobial agents ranging from authorization to the administration to the animals.

INTRODUCTION
In an internal combustion engine, fuel is combusted within the cylinder to generate power. During the power stroke, the temperature can reach up to 1600 ºC, which exceeds the melting point of engine components. The optimal operating temperature for internal combustion engines ranges between 140 ºF and 200 ºF, making cooling a crucial aspect of engine operation. It is estimated that approximately 40% of the total heat generated is released into the atmosphere through the exhaust, 30% is dissipated through the cooling system, and the remaining 30% is used to produce power.
The cooling system in internal combustion engines plays a vital role in ensuring the engine operates efficiently and reliably. It is responsible for maintaining the engine’s temperature within the optimal range, preventing overheating that can lead to engine damage. The engine generates substantial amounts of heat during combustion, and without proper cooling, these temperatures can rise to levels that exceed the melting point of engine components. This can result in engine failure, reduced performance, and significantly shortened engine life. The primary function of the cooling system is to absorb excess heat from the engine and dissipate it into the atmosphere, keeping the engine temperature within safe limits. This allows the engine to perform at its best while avoiding costly repairs and downtime.
The cooling system works by circulating coolant through the engine block, where it absorbs heat, and then transferring this heat to the radiator, where it is cooled by airflow or a fan. There are various types of cooling systems, including air-cooled and liquid-cooled systems, each offering distinct advantages depending on the engine’s design and application. Liquid cooling systems, which are more

Introduction

Desertification is affecting the livelihoods of millions of people, mainly poor in the dry lands, which occupy nearly 41% of the Earth’s land area and are the residence of more than 2 billion people of the world. In India, the western part of Rajasthan is mostly affected by desertification process dominated by wind erosion. Kar et al. (2009) reported that 15.2 mha land in western Rajasthan is affected by wind erosion out of total 22.96 mha area under desertification. A brief account on issues and priorities related to wind erosion processes in Thar desert was reported in Santra et al. (2006). Plenty of incident solar energy in the region makes the desert surface very hot especially during summer months. Wind speed also remains very high in the region for most of the time in a year. Therefore, the loss of top fertile soils through wind erosion process is very active in the region. Eroded dust particles during severe wind erosion events commonly known as dust storms not only create the soils poor but also pose several environmental threats through generating aerosols in atmosphere.