eChapters

8.1 General

Pyrolysis is a process that utilizes heat or fire to separate biomass, derived from the ancient Greek words “pyro” meaning fire, and “lysis” meaning separation. A thermochemical conversion process transforms biomass into a useful intermediate liquid product. This product can then be converted into a hydrocarbon biofuel, oxygenated fuel additive, or a petrochemical substitute. Pyrolysis shares similarities with other thermochemical processes such as cracking, carbonization, torrefaction, destructive distillation, dry distillation, and thermolysis. However, it is not related to gasification, which involves chemical reactions with a gasification medium.

Abstract

Osmotic dehydration is gaining popularity due to several energy and product quality related advantages it offers. It has huge potential as a complementary process step prior to operations such as air-drying, microwave drying, freezing, frying etc, if not an alternative one, in the food process chain. It can be easily integrated with other processing steps in order to improve the overall efficiency of a given food process. Application of additional driving force either prior to or during osmotic dehydration can enhance the mass transfer rates in the osmotic dehydration. Role of mathematical modelling both in osmotic dehydration and rehydration have been discussed. Current limitations for the adaptation of osmotic dehydration in the food processing industry and possible solutions are also discussed in detail.

For qualitative and quantitative analysis of phytochemicals, chromatography can be used. Gas chromatography is a powerful means of performing qualitative and quantitative measurements of complex mixtures of volatile substances, which are vaporizable without decomposition.Gas Chromatography-Mass Spectrometry (GCMS) system is a widely used instrument for qualitative and quantitative analysis of solid, liquid, and gaseous samples. Samples are converted into gaseous ions and then separated on the basis of their mass-tocharge ratio. 

Electron microscopy is a specialized branch of science, which uses the electron microscope as a tool. The electron microscope is an instrument which magnify smallest object thousands times. The magnification is not only requirement to see the smallest otherwise invisible object but the details of the object are most important. The details of the object are depending upon the resolving power of the microscope, which is known as the resolution of the microscope. This resolution or power of the microscope is depends upon the wavelength of the illuminating source. The smallest the wavelength of the illuminating sources is the best resolution of the microscope. Electron microscopes use electrons as an illumination source to take advantage of the very short wavelengths attainable in electron beam, which permit a considerable improvement in resolution over the light microscope.

The relationship between gene and chromosome was suspected at the time of rediscovery of Mendelian^, Laws. During that period Montgomery (1901) and Walter Sutton (1902) working on grasshoppers showed that chromosomes occur in distinct pairs, often of recognizable shape and size, and that synapsis involves the union of maternal and paternal chromosomes, while Winiwarter (1901) concluded from his studies in rabbit ovaries that bivalents in the first meiotic division resulted from the chromosome pairing side by side and not end to end as believed by some other workers of that time . Theodor Bovery (1902) showed from his work on polyspermy in the fertilization of sea urchin eggs that the chromosomes of an individual were not equivalent (genetic information) to one another and hence a full chromosomal complement is essential for normal development of cell. Correns (1902) and Cannon (1902) pointed out close parallelism between Mendelian segregation and chromosome reduction during meiosis and concluded that genes are located on chromosomes but they, like de Vries, supposed that maternal and paternal chromosomes move to opposite poles during meiosis. In the same year Guyer established an understanding that random assortment between different pairs of chromosomes would give the independent assortment of genes required by Mendel. Ultimately Sutton (1903) brought together the ideas from cytology and genetics to clearly show the role of chromosomes in heredity and hence to establish the field of cytogenetics. Boveri also through his work, advanced many of the same ideas and thus the hypothesis correlating genes and chromosome transmission was established, which is known as the “Sutton-Boveri Hypothesis or chromosome theory of inheritance”.

Sorghum (Sorghum bicolor L. Moecnch, 2n = 2x = 20, grass family Gramineae/ Poaceae, often cross-pollinated, 6% cross-pollination on an average, 730Mb genome, about 25% the size of maize or sugarcane) is a staple food crop for millions of poor people in the semi-arid tropics of Africa and Asia. It is one of the important dry-land crops grown in marginal soils and a source of feed, fodder and bio-fuel apart from food. It is a short-day C4 plant, and its easy adaptability to hot and dry agro-ecologies makes it a climate change-resilient crop. Sorghum is considered as an often cross-pollinated species, with outcrossing up to 6 % depending on the genotype and growing conditions.

Statistical Series: When observations of any characteristic present in the individual of a group are recorded and arranged one after the other in a systematic order, they form a series, known as statistical series. For example: milk yield of 20 cows, height of the students in a class in a systematic order, etc. These are some important types of series:

• Discrete series: In this series, observations can take up only exact values and not any fractional values, is called discrete series. That means, this type of series has whole number of counting. For example: number of the students in a class, members of a family, number of births in a certain year, etc

• Continuous series: A series which can take up any numerical value (integral/ fractional) within a certain range is called continuous series. For example: milk yield of 20 cows, height, weight, temperature, etc.

• Array series: When we arranged the observations of a series either in ascending order of their magnitude or descending order of their magnitude, then it becomes an array series.

• Spatial series: When items of a series are given according to space or place or time, then such type of series is known as spatial series. For example: month wise milk yield of a herd of cows, month wise income or expenditure of an industry, population of a country according to states, etc.

Subject: Biostatistics and computer application (UNIT-I)

Write true (T) or false (F)

Q1. Write true (T) or false (F)

1. The mean and mode are always equal in case of normal distribution.

2. Pie diagram is circular diagram.

3. Skewness is the measure of asymmetry of distribution.

4. Mean sum of squares are the variances.

5. Coefficient of variation may be utilized for comparing two data of different unit.

6. Goodness fit is tested by t-test.

7. Variance is a measure of central tendency.

8. CRD can be use where experimental material is heterogenous.

9. Frequency polygon is made by joining the middle points of the top of each rectangle of histogram.

1. Introduction

 Mushrooms have been part of man’s diet for centuries (Rajarathnam and Shashirekha, 2003). Mushrooms grow on wide range of agro-residues, biodegrade and biotransform them into edible fruiting bodies (Rajarathnam and Zakia Bano, 1988a; 1988b; 1990; Zakia Bano and Rajarathnam, 1988; Zakia Bano et al., 1993; Rajarathnam et al., 1998). Their post-harvest life is very ephemeral at room temperature (Rajarathnam et al., 1983) due to delicate flavor (Rajarathnam et al., 1990) and high moisture content, with a range of chemical constituents (Zakia Bano and Rajarathnam, 1986; 1982; 1988; Rajarathnam and Zakia Bano, 1990; Rajarathnam et al., 1983; 1992). Since, they contain large quantities of water and therefore suffer considerable weight loss during transportation and storage, causes serious economic losses, due to reductions in weight and quality (Gray, 1970). When the supply of water, organic substances and minerals are cut off at harvest, the fresh mushroom enters a deterioration or perishable phase. Cap opening and stem elongation are the usual symptoms of senescence constituting visible evidence of deterioration. At room temperature, the shelf-life of mushrooms cannot be for more than 24 h (Rajarathnam et al., 1983). During this period, there are considerable changes in color, texture and taste. In addition, water is continuously being lost as a result of transpiration and respiration. Additional loss occurs from surface cracks and bruises that develop during growth and handling (Salunkhe et al, 1991). Fresh mushrooms are white or light buff, with no dark marks on either the cap or stem. The veil is closed and the gills are not visible. The upper surface of the caps should be strongly convex and stems should be plump rather than elongated. Mushrooms are grown on compost, usually in mushroom houses where the temperature and humidity can be controlled. Eventually after harvest, the mushrooms can never be able to withstand any increase in temperature and decrease in relative humidity. Mushrooms are commercially preferred at the immature stage characterized by closed caps, invisible lamellae, round stipe and light color. Agaricus development is classified into various stages (Table 1). Thus, the concept of physiology of fresh mushrooms being very complicated, bears a great impact on the delicate problem of extending the storage life. The various means and methods studied and adopted by various researchers to aim at extended storage life of fresh produce, underlined by its physical, chemical and biochemical properties and also development of value added products are critically evaluated.

Soybean (Glycine max L. Merr. 2n = 2x = 40, essentially a self-pollinated oil seed crop, family Leguminosae), also known as a miracle crop with on average 40% protein and 20% oil and one of the globally “Four Big Crops” namely rice, wheat, corn and soybean. As per FAOSTAT-2016, global soybean acreage, production and productivity are 121 million ha, 335 million tons and 2755 kg per ha for the year 2016. As per this statistics, top ten soybean producing countries are USA (108 million tons), Brazil (87 million tons), Argentina (53 million tons), China (12 million tons), India (10 million tons), Paraguay (10 million tons), Canada (6 million tons), Ukraine (4 million tons), Bolivia (3 million tons) and Uruguay (3 million tons).

5.1 Basics of Writing

Writing news stories involves a specific set of guidelines and practices to ensure accuracy, clarity, and effective communication.

• Writing News Stories

A methodical approach is necessary when writing news articles in order to provide accurate, educational, and captivating information.

Introduction

Farming and agriculture are respectively defined as the practice of cultivating the land or raising stock and the production of agricultural goods through the growing of plants and the raising of domesticated animals. In the developing countries frantic efforts have been made through research and enlightenment campaigns to encourage farming and thus ensure significant increases in agricultural production in order to feed and sustain the population that is increasing at geometric proportion. At present, the farmers concentrate mainly on crop production which is subjected to a high degree of uncertainty in income and employment to the farmers. In this context, it is imperative to evolve suitable strategy for augmenting the income of a farm.

Introduction

Citrus is one of the most important fruit crops in the world. Citrus fruits are grown in the tropical and subtropical regions of the world. Some of the important countries where these fruits are grown include USA, Brazil, Spain, Israel, South Africa, Australia, China, India, Mexico and Morocco. Citriculture as a garden industry dates back to less than one hundred years. Indian citrus industry is the third fruit industry after mango and banana. The important groups of crops in citrus are sweet oranges, mandarins, limes, lemons, grapefruits and pummelo (Singh, 2001). Total world citrus production is about 115525.2 thousand tonnes, whereas in India, the production of citrus fruits is 8267.2 thousand tonnes (Anonymous 2012). The most important commercial Citrus species grown in India are the mandarin (Citrus reticulata Blanco), followed by sweet orange (Citrus sinensis Osbeck) and acid lime (Citrus aurantifolia Swingle). The main cultivars in the mandarin group are the Nagpur mandarin, Coorg mandarin, Khasi mandarin, Hill mandarin and the Kinnow mandarin. Maharashtra, Karnataka, Andhra Pradesh and Punjab are the major citrus producing states, while in Haryana, Uttar Pradesh, Madhya Pradesh, West Bengal, Tamil Nadu, Gujarat and Bihar, the fruit is grown to a limited extent. In Rajasthan new plantation of citrus are coming up very well and the main cultivars are Nagpur and Kinnow mandarins.

18.1. INTRODUCTION

Plant genetic resources (PGRs) are the foundation for the development of a food and nutritionally secured society. Food is the foremost important to sustain life and livelihood followed by shelter and cloth. Thus, the slogan of 3Fs may be modified as, “Food, Frame (shelter) and Fibre (cloth)”. All these 3Fs we can get from PGRs. There must be balance between demands and resources. Gradually the demand for basic needs increasing. So, we have to improve the PGRs to cope with the increasing demands. PGRs are the foundation for the development of these 3Fs. India is a country rich in crop biodiversity and genetic resources. The status of Germplasm accessions in the National Gene Bank is being presented in Table 18.1.

11.1 General

Biogas is generated through a process of anaerobic digestion of organic materials. The materials normally used are human and animal waste, crop residues, agro-industrial waste and other biomass in a combination with water. Biogas production technology contributes in following ways:

(a)It provides a better and cheaper fuel for cooking, lighting and for power generation.

(b)It produces good quality, enriched manure to improve soil fertility.

(c)It provides and effective and convenient ways for sanitary disposal of human excreta, improving the hygienic conditions.

(d)It generates social benefits such as reducing burden on forest for meeting cooking fuel by cutting of tree for fuelwood, reduction in the drudgery of women and children etc.

(e)As a smokeless domestic fuel, it reduces the incidence of eye and lung disease.

(f)It also helps in generation of productive employment.

The biogas technology is primarily based on fermentation of cellulosic rich organic matter under anaerobic conditions. The methane producing bacteria become more active after the creation of anaerobic conditions, thus, the gas produced become rich in methane & carbon dioxide, beside traces of hydrogen sulphide, ammonia, oxygen, water vapour etc. depending on the feed material and other conditions. For burning of gas, it is necessary that methane contents should be more than 50 per cent. The complete knowledge of process of methane production including its chemistry, physiology, bio-chemistry, micro-biology and bacteriology has been studied over years in many parts of the world. The culture and isolation of microbes under various environmental conditions have been successfully experimented to improve rate of reaction. The conditions, under which cattle dung, organic wastes, bushes, weeds etc. will produce methane, can be understood through chemistry of fermentation.

1. Introduction

As dealt in earlier chapters, fruits and vegetables represent the most essential of horticultural component for acreage of production, yield, nutritional and nutraceutical values, of definite taste, texture, flavor and colour, involving defined health and medicinal benefits. Every year and over the course of every ten years, significant quantum of research data accumulates on the various facets of fruit and vegetable technologies, and also trends in production, processing and marketing, may also tend to change. At every stage, more thinking has gone to improve the technology, product quality and cost economics to suit wider markets, both domestic and foreign. It is a continuous endeavor to record newer and newer problems emerging and to set the strategies to solve them. Several relevant references, fitting to the various aspects representing the cross section of the fruit and vegetable technologies are dealt here, to conclude the subject and spell out the future.
Consumer demand for healthy convenience meals with ‘near fresh’ properties challenges researchers and industry to develop new or improved conservation procedures for processed products. Development of a dehydration process based on electromagnetic energy (EME) may bring about a major breakthrough with respect to retention of product quality and improved rehydration characteristics (Nijhuis et. al., 1996). Economic potential and current limitations of fruit and vegetable processing in India included improvements in preliminary treatment (harvesting, washing/cooling) precooling (including refrigerated transport/storage) and processing of juices and pulps. Establishment of a National Horticulture Board has aided to provide market information and so aid growers to get remunerative prices (Anon, 1993). The use of food irradiation as a quarantine method for treatment of food and agriculture commodities was organized by the joint Food and Agriculture Organization/International Atomic Energy Agency Division of Nuclear Techniques in Food and Agriculture, held in Kuala Lumpur, Malaysia, on 27-31 Aug., 1990. (FAO,1992). This has been experimented with various commodities, particularly for export trade of fruits like mango, as stipulated by the importing country like U.S.A.

5.1 INTRODUCTION

One of the generalizations that can be made about soils is that the particles of which they are composed together have a nett negative charge. There are exceptions: for example, some iron- and aluminium-rich tropical soils can attain a positive charge at low enough pH, but such cases are rare. It is nonetheless a fact that most anions are held strongly by the soil complex, and it is the purpose of this chapter to look at some of the reasons why this is so. Historically, the impetus to research in this area has largely been the practical necessity to understand the behaviour of applied phosphate fertilizer, and it is some indication of the complexity of the problems involved that, even after decades of effort by soil chemists and agronomists, this understanding is still far from complete. The reason for this is partly that the soil surfaces themselves are, as has been described by Greenland and Mott (1978) in the companion volume, the product of a ‘dirty’ environment. This generally means that phosphate added to the system has to exchange on sorption with an inadequately characterized suite of anions presorbed on ill-defined surfaces. There are also in the case of phosphate, possibilities of simultaneous precipitation. Faced with these problems, the trend in the literature over the past ten years or so has been to investigate in detail the physical chemistry of the sorption of anions onto simple surfaces which are fairly well understood, in the expectation that this will lead to ultimate comprehension of behaviour in the natural system. The results of many relevant experiments have only recently been published, and so some parts of the account are still at the discussion stage in the literature. This is especially true of phosphate, which looks destined to be a joker in the anion pack for some time to come.

8.1 INTRODUCTION

The development of a soil profile involves the mobilization of major and minor elements and their subsequent deposition elsewhere in the profile or removal in the drainage water. For a full understanding of these processes we need to know what are the forms and reactivities of the soil constituents, the nature and mode of action of the mobilizing agents, the forms in which the mobilized material is transported—whether colloidal or in true solution, whether in ionic or complex form, whether alone or in association with other soil constituents—as well as its stability towards oxidation and reduction, microbial action, pH, and sorption and coprecipitation. The availability of micronutrients to plants is presumably governed by factors such as these. The current concern with problems of soil contamination has brought to the attention of soil chemists numerous toxic metals that were previously regarded as essentially the province of the geochemist.

It is probably true to say that no one of the factors listed above can be considered in isolation, but so far as any one factor is of dominant importance, this is nature of the mobilizing species; this determines the form in which the metal is transported, and its ultimate fate in the soil or in the drainage water.

This chapter is an attempt to summarize our present knowledge of the processes responsible for the mobilization and immobilization of metals in soils.

India, the land of oldest civilization known through out the world for its vibrant cultures, faiths, lifestyle, traditions, rituals etc. which are interwoven with each other since time immemoral. Here people of different ethnic groups live together who speak different languages and dialects according to their religion and choice. Altogether, 68 million inhabitants belonging to 227 ethnic groups, comprising of 573 tribal communities exists in different part of the country. These people constitute 8.08% of the total population of India (1991 Census of India) and speaks <750 dialects that can be classified into one of the following three language families: Austro-Asiatic (AA), Dravidian (DR), and Tibeto-Burman (TB). When come to think of different tribal community’s inhabiting India, they can be easily divided into six major racial lineages i.e. - Negroid, Mongoloid, Proto-Australoid/ Austrics, Mediterranean or Dravidian, West Brachycephals and Nordic Aryans

Plants are important to humankind not only economically, environmentally and industrially but also spiritually, historically and aesthetically, they sustain human life through direct and indirect gains by providing a wide range of products for survival and prosperity. Bio-aesthetic planning to a large extent is a product of the age. With the advancement in agriculture and increase in population, large settlements developed, marking the beginning of urbanization. More and more people moved to urban areas for comfortable life. Increasing human needs resulted in large-scale exploitation of natural resources, great reduction in forest cover and extinction of many species of flora and fauna. The extent of forest cover is a good indication of the health of the land. The large scale deforestation in recent decades has rendered the sensitive catchment areas and hilly areas particularly vulnerable to soil erosion. Professor Lancelot Hogben coined the term ‘Bio-aesthetic planning’ defined as planning of flora and fauna with the object of beautifying the piece of land (country). Bio-aesthetic planning is an aesthetic branch of Horticulture which deals with planting of ornamental plants in such a way that it creates a picturesque effect. It is a very fascinating and interesting subject. With the greater realization of environmental, ecological and socio- economic benefits of plants, scope of Bio-aesthetic planning has increased further. Bio-aesthetic planning can play important role in environmental amelioration of urban and industrial areas along with their beautification.