eChapters

ABSTRACT

With the rapid innovation in Information and Communication Technologies (ICTs), the libraries and information centres have gone through tremendous changes or facing transformation. In this digital era, libraries are facing heavy technological pressure to serve their users on their satisfaction level. Library and information professionals are also struggling more to implement these cutting-edge technologies for learning, research, and information for their users. Therefore, the library and information centres have now been trying to adopt and implementing various emerging or cutting-edge technologies in housekeeping activities as well as in its services. In this paper, an effort has been made to evaluate some of the cutting-edge technologies in libraries’ point of view. An overview is also made to evaluate the concept, advantages and disadvantages of cutting-edge technologies.

Keywords: ICT, Cutting-Edge technology, Emerging technology, Library services, Impact.

In the detection of soil organic carbon a known weight of soil is heated with an excess volume of standard K2 Cr2 O7 in the presence of Con. H2 SO4 . The soil is slowly digested at the low temperature by the heat of dilution of H2 SO4 and the organic carbon in the soil is thus oxidized to CO2 . The highest temperature attained by the heat of dilution reaction produced with the addition of Con. H2 SO4 is approximately 12o C which is sufficient to oxidize the active forms of the soil organic carbon but not the more inert forms of carbon that may be present.

Abstract
The use of Genetically Modified Microorganisms (GMMs) and Genetically Engineered Microorganisms (GEMs) offers a groundbreaking solution for tackling environmental pollution, especially in highly contaminated areas. These microorganisms, engineered for enhanced degradation of pollutants, offer significant potential for restoring polluted environments such as soil, groundwater, and wastewater. However, concerns regarding their uncontrolled persistence, gene transfer, and potential environmental risks have prompted the need for further research and the development of safer, more efficient strategies. Key advancements in the field include the use of suicidal genes to ensure the safe removal of GMOs post-degradation, as well as the use of bioluminescent signals to monitor microbial activity in real-time. Furthermore, composting has proven to be an effective strategy for reducing the risks associated with horizontal gene transfer. Despite these innovations, the widespread field application of GMOs for bioremediation remains limited to controlled systems. This article explores the challenges and advancements in utilizing GMOs for bioremediation, underscoring the importance of ongoing research to ensure their safe and effective application.
Keywords: Genetically Modified Microorganisms (GMOs), Bioremediation, Environmental Pollution, Biosafety, Biodegradation.

Barleria, particularly Barleria cristata, is a perennial evergreen flowering shrub valued for attractive blooms, garlands, religious functions and ornamental landscaping. The crop has considerable commercial importance in southern India, while other species are used in ornamental and medicinal applications. This chapter covers the origin, distribution, genetics, botanical description and important species and varieties of Barleria. It explains suitable climate and soil conditions, propagation through seeds and stem cuttings, land preparation, nutrient management, planting and irrigation. Cultural practices such as weeding, mulching, pruning and pinching are described along with pest and disease management. Harvesting, postharvest handling and yield are also addressed.

Nutrient use efficiency of crops is being improved through temporal and spatial management of the form and amount of nutrient inputs as being demonstrated by various agronomic practices. In addition, understanding of the genetic basis of nutrient efficiency would lead to the development of nutrient use efficient varieties thus reducing the application of nutrients. Earlier studies on genetics of nutrient use efficiency were limited as increasing productivity with heavy nutrient inputs was the main focus. But in the backdrop of environmental degradation due to the excessive nutrients and its impact in climate change, nutrient use efficiency in crops is need of the hour for sustainable and eco-friendly agriculture.

A. Answer the following

Q.1.    What is the difference between apoptosis and necrosis?

Ans.    In apoptosis, there is pronounced decrease in cell volume, modification of cytoskeleton, condensation of chromatin and degradation of DNA into fragments. Due to these changes, an apoptotic cell sheds tiny membrane bound apoptotic bodies containing intact organelles. Macrophages phagocytose apoptotic bodies and cells in the advanced stages of apoptosis. But there is no release of proteolytic and the lytic enzyme, cationic proteins and oxidizing molecule in the surrounding tissue and no local inflammatory response. On the other hand, in necrosis cells swell and burst releasing their contents and possibly triggering a damaging inflammatory response.

Packaging is a tool that is used to contain the product, protect the product from environmental hazards and help in marketing the product. Examples of ideal natural packaging systems are that of a banana, orange, coconut and egg, where the packaging is provided by nature. The major step forward in the food processing arena has been the ability to protect and preserve products with packaging and hence ensuring the availability of fresh and processed products out of season and over long distances in various forms. Milk is a highly perishable product and is not uniformly available round the year to the whole country due to geographical and genetic variations. If dairy products are to be available all the year round the country, irrespective of the season and area, it must be presented in packages that are convenient to purchase and use.

Packaging has additional responsibilities of providing convenience, safety and facilitating, besides handling, storage and distribution of products. It should prevent spoilage of food by microbial or insect attack. It also preserves the quality and nutritive value of many foods by the exclusion of oxygen and the control of moisture loss or gain. It increases the shelf-life and ensures longer availability and contributes to the product image through structural and graphic design. Product information is also given out through the medium of labeling, which acts as a tool for marketing and advertising.

2.1 INTRODUCTION

Vegetables are grown and consumed throughout the country either on small or commercial scale. Various terms have been used for vegetable gardening, based on the objectives for which they are grown and can be classified into various types depending on the acreage cultivated, method of cultivation and purpose of vegetable production. Based upon these facts, vegetable cultivation is divided into the following types of gardens:

Home or Kitchen Gardening: The purpose of this gardening is to supply the varieties of vegetables for family use.

Commercial Vegetable Gardening: This is the method of growing vegetables on large scale to earn profit and is further divided into seven types

Introdoction

Tillage is a prime activity carried out prior to sowing of a crop with an objective to bring the soil to a favorable tilth to provide a congenial environment for crop growth and yield. The operation of ploughing once and left out for a few weeks followed by a broadcasting of rice seeds by hand and then ploughing and raking together at the same time once gave highly significant rice grain yield (Srisa-ard, 2008). Adoption of the “Sawah” system (bunded, puddle and leveled) in inland valleys in Ghana lead to significant improvement in soil and water management; enhancement in rice grain yield and made sustainable production. Even the practice of Sawah system of cultivation increased local rice production by over 300% because of the mechanisms with intrinsic resistance to erosion (better water control and nutrient management (Buri et al., 2012).

• Fish cum-poultry farming.

• Fish cum-duck farming.

• Fish cum-pig farming.

• Fish cum-paddy farming.

A) Fish Cum-poultry farming

Inland fish culture in conjunction with poultry rearing is a compatible business and can provide a readymade fertilizer for fish pond. In a larger sense fish and poultry are mutually complementary the former provides fish meal a protein rich poultry feed and the later is droppings which acts as fertilizers for plankton production to serve as natural proteinous fish feed. Fish meal is recognized as perhaps the choicest poultry feed. In an integrated fish cum-poultry farm, birds have to be housed in deep litter of battery system in which the pen flora is covered with hay. The floor of the pen is covered with chapped straw dry leaves, hay broken up groundnut shells maize straw and saw dust. Each bird should have about 0.3 m² space to live on the deep litter flooring bird droppings falling on the litter react with the flooring organic material. The litter has to be periodically churned for aeration and maintenance of hygienic conditions.

A. Answer the following.

Q.1.     What are the different phagocytic cells ?
Ans.     The phagocytic cells of mammals belong to two complementary systems (1) The myeloid system consists of cells that are rapidly phagocytic but incapable of sustained effect. (2) Mononuclear phagocytic system act more slowly but capable of repeated phagocytosis.

Q.2.     How 3 types of granulocytes are differentiated ?
Ans.    Three types of granulocytes are distinguished by the staining property of their granules. Cells whose granules take up basic dyes such as haematoxylin (a blue dye) are called basophils, whose granules take up acidic dyes such as eosin (a red dye) are called eosinophils and those that take up neither basic nor acidic dyes are called neutrophils.

Rivolta (1873) first described the chain forming cocci in pus collected from the equine infection. Later Rosenbach established the genus ‘Streptococcus’. Nocard and Mollereau (1887) first observed the relationship between the bovine mastitis and Streptococcus agalactiae.

Properties of genus

1. Morphology : Streptococci are gram positive cocci, capsulated, non-sporing and non-motile. Each coccus cell is 1µm in diameter.  They are arranged in a pair or chain of cells as the cell division occurs in one plane (Fig. 1). The chain formation and the chain length are variable. Streptococcus equi ssp equi is a constant chain producer, other species are not. The chain length is shorter in artificial media than natural one. Young cultures are gram positive whereas the bacteria present in the pus and older cultures in the laboratory are often stained as gram negative. 

Streptococcal capsule is polysaccharide in nature. It can be subdivided into different antigenic types (e.g. S. agalactiae, S. pneumonae). However capsules of S. equi, S. pyogenes are made of nonantigenic hyalu-ronic acids containing repeating units of glucuronic acid and N-acetyl-glucosamine. Synthesis of the polymer involves the products of three genes, hasA, hasB, and hasC, which are all in the same operon.

Introduction

Among vertebrate pests such as birds and wild animals, Well-known rodents include mice, rats, squirrels, dogs, gerbils etc., are great importance. Among rodents, rat and mice come under class Mammalia. They are small mammals belonging to order Rodentia and under sub family Murinae in the Family Muridae. Rat and mice cause severe damage to various crops like sugarcane, rice, maize etc. both directly and indirectly by gnawing, spoilage, contamination and hoarding activities. Beside this, it is big problem in house, store godown, warehouse, urban cities and industries. Rats and mice have caused more human suffering and more economic damage than any other vertebrate pest. It is also known to introduce secondary pest like fleas, mites and ticks into premises cause additional problem.  Statisticians estimate that rats and mice destroy 20 per cent of the world’s food supply every year directly by feeding and indirectly through contamination. It has adapted to nearly all human environments. They live in granaries, fields, city sewers, attics, basements, street trees, on top of 30-story buildings, and inside subway tunnels. Rats may be also responsible for the spread of many diseases. Some of the more important diseases associated with rats are plague, murine typhus fever, rat bite fever, salmonella food poisoning, and trichinosis. Adult mice have a small, triangular head with a small nose and little delicate feet as compared to the body. The mouse ears are very large relative to their heads. Rat ears are smaller relative to their heads. Rats have thicker tails than mice.

Feed accounts for a significant cost of production in livestock and poultry. In case of poultry, it represents 65% cost of the production in broilers and 75% in layers. Presently the live stock industry faces a huge challenge due to the high cost of feed ingredients and shortage of the conventional feed ingredients. Over the years, efforts have been made to use unconventional feed ingredients. However, such feed ingredients have many anti nutritional factors that adversely affect the performance of livestock and poultry. Due to the presence of these incriminating factors, the unconventional feed ingredients are poorly digested in livestock and poultry. These poorly digested feed ingredients results in bacterial overgrowth, which becomes a potential substrate for bacterial fermentation leading to intestinal disorders and disease. Application of antibiotics and other anti-microbials help to overcome the ill effects. However, the ban on the use of sub therapeutic level of antibiotics in many countries has increased the relevance of use of exogenous enzymes in the feed of livestock and poultry. These exogenous feed enzymes improve the nutritive value of different feed stuffs, economize livestock and poultry rearing and reduce environmental pollution.

Linkage

When two or more genes are located on the same chromosome, they are said to be linked. Genes on different chromosomes are distributed to the gametes following the law of independent assortment. However, genes located on the same chromosome, tend to stay together during gamete formation. For example, results of test-crossing dihybrid individuals will produce different results depending upon whether the genes are linked or are located on the same chromosome. This is illustrated as follows:

Bakery Industry

Baked goods have been around for thousands of years. The art of baking was developed early during the Roman Empire. It was a highly famous art as Roman citizens loved baked goods and demanded for them frequently for important occasions such as feasts and weddings etc. Due to the fame and desire that the art of baking received, around 300 BC, baking was introduced as an occupation and respectable profession for Romans. The bakers began to prepare bread at home in an oven, using mills to grind grain into the flour for their breads. The oncoming demand for baked goods vigorously continued and the first bakers’ guild was established in 168 BC in Rome. This drastic appeal for baked goods promoted baking all throughout Europe and expanded into the eastern parts of Asia. Bakers started baking breads and goods at home and selling them out on the streets.

This trend became common and soon, baked products were getting sold in streets of Rome, Germany, London and many more. This resulted in a system of delivering the goods to households, as the demand for baked breads and goods significantly increased. This provoked the bakers to establish a place where people could purchase baked goods for themselves. Therefore, in Paris, the first open-air bakery of baked goods was developed and since then, bakeries became a common place to purchase delicious goods and get together around the world. By the colonial era, bakeries were commonly viewed as places to gather and socialize.^[2] World War II directly affected bread industries in the UK. Baking schools closed during this time so when the war did eventually end there was an absence of skilled bakers. This resulted in new methods being developed to satisfy the world’s desire for bread. Methods like: adding chemicals to dough, premixes and specialized machinery. Unfortunately these old methods of baking were almost completely eradicated when these new methods were introduced and became industrialized. The old methods were seen as unnecessary and financially unsound, during this period there were not many traditional bakeries left.

Bakery is a traditional activity and occupies an important place in food processing industry. The bakery manufacturers in India can be differentiated into the three broad segments of bread, biscuits and cake. About 1.3 million tonnes of the bakery products industry in India is in the organized sector out of 3 millions tonnes, while the balance comprises of unorganized, small-scale local manufacturers. Though, there are sufficient automatic and semi-automatic bread as well as biscuit manufacturing units in India but there are still number of people prefer fresh bread and other products from the local bakery. After entry of Pizza and Burgers’ MNCs in the country, people are changing their tastes also. Today, they are not restricted to bread, cake and biscuits but to other bakery products also. The consumers are increasingly going for newer options with respect to bakery products. With the ventures of few Companies like Britannia, Biskfarm, and Morish etc. competition has increased. Also, the Indian market is witnessing the proliferation of bakery cafe chains in the form of Baristacafe, coffee day, Café Coffee & Monginis etc.

Armed with better technology, know-how and novel ideas, these foreign companies have made rapid inroads into the lucrative market within a very short span of time. Though the demand for bakery products in India has always been on the rise, there is clearly a lack of awareness and the will to break new ground, which has helped global players to gain brownie points while exploring the market in India. The unorganized sector accounts for about half of the total biscuit production estimated at 1.5 million tonnes. It also accounts for 85 per cent of the total bread production and around 90 per cent of the other bakery products estimated at 0.6 million tonnes. The last includes pastries, cakes, buns, rusks and others.

Canonical analysis: The canonical analysis can be used in the case when both measurable and non-measurable variables for the purpose of simultaneously predicting a set of dependent variables from their joint covariance with a set of independent variables.

Adoption

Adoption is a decision to make full use of an innovation as the best course of action available.

Steps in adoption process

Ryan and Gross (1943) were probably the first to recognize that the adoption of a new idea consisted of stages. They distinguished between awareness of hybrid seed cron conviction of its usefulness, trial acceptance and complete adoption of the innovation.

Adoption is essentially a decision making process. According to Johnson and Haver (1955), decision making involves the following steps.

Introduction

In India, the ground water recharge in arid and semi-arid regions is very important particularly as most of the population residing in these regions depend on groundwater for drinking and irrigation purposes. In such scenarios, to alleviate the problems of drinking water, the collection and storage of rainwater to supplement existing water supply sources should be implemented. The utilization of rainwater is one of the best methods that can aid in sustainable urban development (Kim et al., 2005). Every drop of rainfall should be utilized to cater the demand of an ever increasing population as the present system of water supply may not be sufficient in future. The rain water collection & its utilization, seems to be the only option to satisfy the demand of arid and semi arid regions. In most cases, the rain water is the purest water source & contains very low impurities. It is necessary to adopt rainwater harvesting methods in places where the conventional water supply has failed to meet the peak period demand of the people for drinking water. Rain water harvesting is one of the most economical and practical methods to provide supplementary water supplies for drinking purpose.