eChapters

Of the various weather elements affecting crops, temperature and rainfall are perhaps the most important. It is the reason for the development of special flora and fauna in different climatic zones of the world as seen in the tropical, temperate and frigid zones. The tropical regions get abundant solar heat and the vegetation is high while it is low in the temperate regions. The vegetation is very little in the frigid zones. Similarly, natural vegetation is at its poor growth in the Arid Climates and better in the Humid Tropics. Xerophytes are confined to the Arid Climates where low rainfall is seen, while hydrophytes are confined to the Humid Tropics. Mesophytes are intermediate in their water requirement. Most of the crops are included in this group. If the crops are selected for cultivation on the basis of the optimum climatic requirements, it is likely that crop production can be maximised under rainfed as well as irrigated conditions. For example, coconut is grown in vast areas across the East and West Coasts of the Country in different agroclimatic zones and known as a coastal tree. It gives reasonably better yield in terms of quantity and quality in the Humid Tropics under rainfed conditions. However, the coconut yield scenario is totally different when the crop is cultivated in Semi-arid Tropics under irrigation. Therefore, it is a complex phenomenon to understand the influence of weather and climate on crops under rainfed and irrigated conditions in various climatic zones. The production potential of crops under field conditions could be explained through crop-wise agroclimatic zonation, whether the crop is well-suited with minimum inputs for maximising yields under rainfed conditions, but not under irrigated conditions due to crop manipulation. Many attempts were made to explain the climatic boundaries for various crops based on agroclimatic indices under rainfed conditions.

In organic chemistry, phenols, sometimes called phenolics, are a class of chemical compounds consisting of a hydroxyl group (—OH) bonded directly to an aromatic hydrocarbon group. The simplest of the class is phenol, which is also called carbolic acid C₆H₅OH. Phenolic compounds are classified as simple phenols or polyphenols based on the number of phenol units in the molecule.

Concept and Meaning of Empowerment Meaning and definition

Women empowerment has been widely recognized as an important goal in global development process. The term “empowerment” was coined in the second half of the seventeenth century (Oxford English Dictionary). It gained momentum in USA in 1960s when the activists of Black Panat Movement used the term ‘empowerment’ in the context of political mobilization. In 1980s the term was adopted by NGOs worldwide to signify an alternative development agenda for poverty alleviation based on principles of participation and self help. During this period, the participation and self help came to forefront. There after it has entered many fields of theory and practice. Since 1980s, the world has witnessed the concept, used to describe this phenomenon (empowerment).

The voiceless and powerless are the common elements that need the concept of empowerment in terms of socio-economic, technological, cultural and political development. In the context of power, empowerment depends on two things. These are: power can change and power can extend. The concept came to exist that power can change and power can extend giving the term ‘empowerment’ as the power is created in relationship, power and power relationship can certainly change. Therefore, empowerment simply is a process of change.

A. Diseases

1. Anthracnose

Occurrence & severity status

The Anthracnose [Fig. 14 (A-B)], also called as ‘Stem-break’, is one of the most serious diseases of sunnhemp (Crotalaria juncea ) in India. It occurs in all sunnhemp growing areas of India (Mitra 1934; Kempanna et al., 1960; Kundu, 1964; Kumar et al., 2016). Apart from India, its occurrence in several countries of South Tropical Africa, like, Rhodesia (Whiteside,1955), Zimbabwe, and other tropical countries including Trinidad and Tobago (Damm et al., 2009), was also noticed as a major disease (Purseglove, 1974). In many places, the disease is considered as the second most serious disease of sunnhemp, causing wilt and weakening of the stem.

In recent years, pseudocereals and alternative cereal substitutes are gaining attention from agriculture, processing and consumer point of views. The 14 justification for such changes can be found in the recent thought of reextending the range of starch rich seeds available in human diet, because from world-wide perspective cereals consumption is largely restricted to the cereals wheat, rice and maize (Venskutonis and Kraujalis, 2013). In upcoming years, the increase in population can lead to an unfavorable pressure on agriculture and nutrition needs.

The word “arrhythmia” has been derived from ancient Greek ?ρρυθμος (arruthmos) via new Latin “arrhythmia”. Arruthmos is made up of ‘a ‘(without) and ‘rruthmos’ (rhythm) means without rhythm. By definition as per dictionary, arrhythmia is defined as any disturbance in the rhythm of the heartbeat. In fact in medical sense arrhythmias are the disturbances not only in cardiac rhythm but also in cardiac rate or both. The seat of generating impulse in the heart is the pacemaker, of highest automaticity, in the SA node. If any impulse is generated outside the SA node pacemaker it leads to arrhythmias.

6.1  Write True/False

Q.1    A procedure to make an inference about the unknown values of parameters of one or more than one distribution in which the sample size say n is a ramdom variable, is known as “Sequential procedure.”
Q.2    The principal feature of sequential procedure is a ‘Sampling Scheme’ which provides a rule under which one decides at each stage of sampling whether to stop or continue the sampling work.

Trees are the largest plant components of gardens and landscapes. However much architectural features dwarf them, for human beings, they are the largest living entities in the environment. Profoundly influencing our habits, styles of habitation, culture and daily life, trees have been revered, sanctified and given symbolic importance and above all, depended upon as means of livelihood by entire communities through the ages. Through folklore, traditional knowledge and rituals, the usefulness of trees has been handed down from generation to generation-in societies all over the world. In India, cave paintings and carvings in addition to ancient literary works document the aesthetic and medicinal knowledge of our forefathers about trees found in the sub-continent.

Trees differ in stature, branching habit, girth of trunk and branches, canopy structure, outline and crown shape. The colour of the foliage, its texture, glaze, shape and size, foliage colour, floral features and season of flowering also differ among trees. These characteristics in addition to giving distinctiveness, also determine their ornamental use in gardens and landscapes. In tropical gardens evergreen dicotyledons and palms dominate among the trees, whereas in temperate situations evergreen conifers are selected over the deciduous dicots for tree planting. Palms among trees are universally grown as avenue trees or as clumps in areas where they can be easily grown while the other trees are grown as such or pruned and trained into various forms or as bonsai in gardens.

9.1 Introduction

The world is facing various challenges, including climate change, population growth, and decreasing fertile land. It is necessary for the agricultural sector to shift towards sustainability and innovation. To revolutionize traditional farming practices, alternative cropping systems and advanced technologies like plant tissue culture in greenhouses are being explored. The goal is to optimize resource utilization, enhance crop resilience, and reduce the environmental impact. By adopting cutting-edge technologies, such as plant tissue culture, crops can be propagated and cultivated within controlled environments like greenhouses, ensuring global food security and meeting the growing population’s demands.

C - enamel can : The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products.

CA storage : Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables.

1. GENERAL INFORMATION

India’s exports of Processed Food was Rs. 31563.43 Crores in 2014-15, which includes products like Mango pulp (Rs. 841.39 Crores), Dried and Preserved vegetable (Rs. 847.11 Crores), Other Processed Fruit and Vegetable (Rs. 2,569.93 Crores), Pulses (Rs. 1,209.51 Crores), Groundnuts (Rs. 4,675.35 Crores), Guargum (Rs. 9,480.00 Crores), Jaggery and Confectionary (Rs. 1,161.81 Crores), Cocoa Products (Rs. 848.62 Crores), Cereal Preparations (Rs. 3,038.79 Crores), Alcoholic and Non-Alcoholic Beverages (Rs. 2,231.58 Crores) and Miscellaneous Preparations (Rs. 2,437.77 Crores).

Etiology

Etiology is the study of cause of disease. It gives precise causal diagnosis of any disease. Broadly, the cause of diseases can be divided into two

a. Intrinsic causes.

b. Extrinsic causes.

Intrinsic Causes

Those causes which determine the type of disease present within an individual over which he has no control. These causes are further divided into following subgroups:

Genus

Specific diseases occur in a particular genus or species of animals. e.g. Hog cholera in pigs, Canine distemper in dogs

Flood-control economics compares the financial, social, and environmental costs of flood damage with the costs and benefits of alternative mitigation measures. Because complete protection is generally impractical, planners must identify an economically justified level of risk reduction. Evaluation considers construction, operation, maintenance, rehabilitation, residual risk, avoided losses, project life, discount rates, and direct and indirect benefits. This chapter introduces economic assessment of flood-control projects and examines flood-damage estimation, depth-damage relationships, benefit-cost analysis, present value, and investment decision criteria. It also considers remote-sensing approaches for mapping inundation and assessing losses. The discussion supports the selection of measures that are technically feasible, socially acceptable, environmentally responsible, and economically efficient.

Sabadilla: A botanical insecticide extracted from seeds of Schoenocaulon officinale

Safener: A chemical additive that reduces the phytotoxic properties of a pesticide.

Salivarium or salivary reservoir: The cavity into which the salivary gland opens, between the hypopharynx and the labium.

Salivary gland: The exocrine gland that produces saliva and typically associated with the labial segment; highly variable in size, structure, and function.

Saltation: Discontinuous variation produced at a single step by mutation (cf. Mutation).

Concern for improvement of nutritional quality of vegetables has arisen in the context of providing nutritional security to our ever-increasing population. Nutritional security denotes the consumption and physiological use of adequate quantities of safe and nutritious food by every member of the family and encompasses the process of equitable distribution among members of household and communities (Nandi and Bhattacharjee, 2002). This would entail the need to ensure a varied food intake, comprising all the essential macro-and micronutrients (protein, carbohydrates, minerals and vitamins), plant pigments (lycopene, beta-carotene, anthocianin, lutein, capsanthin, zeaxanthin, etc.) and other functional phytochemicals (secondary metabolites, like flavonoids, isothiocyanates, glucosinolates, etc.) through a diversified diet. In this regard, production and consumption of vegetables that are the valuable source of micronutrients, beneficial phytonutrients and highly functional phytochemicals hold the key in assuring nutritional security.

Implication of vegetables in diet has been well conceived among the high-income group in the world since human health in recent years has assumed an unprecedently important status. Increased interests in nutrition, fitness and beauty have exaggerated concerns over diet and human health. A new diet-health paradigm is evolving which places more emphasis on the positive aspects of diet. Foods have now assumed the status of functional foods, which should be capable of providing additional physiological benefits, such as preventing or delaying the onset of chronic diseases as well as meeting basic nutritional requirements so with high-income elasticity, the demand for vegetables and perception of diversified diet have been growing steadily, hence, both access and consumption of vegetables have been increasing in the urban and peri-urban population groups. However, meeting the requirements for macro- and micronutrients for most of the population groups in households and communities of South Asia, Latin America and African countries seems far off because of meager presence of vegetables in the diet. In south Asia where meat intake is low, ascorbic acid emerges as one of the most important enhancers of iron absorption. This is attributed to the fact that foods containing vegetables may provide an optimal mix of minerals, vitamins, antioxidants, dietary fibers and other non-nutrients bioactive compounds.

Safe, wholesome and nutritious food is vital for sustenance, good health, food and nutritional security and augmentation of sustainable development of an individual. Also, safe food helps in the growth of the national economy and enhances the trade and tourism sector. Foods that are unsafe containing various kinds of microorganisms can cause chronic diseases or illnesses varying from diarrhea to cancer.

SAE: Society of Automotive Engineers; used to indicate a grade or weight of oil measured according to the SAE.

Safe load: The load that a piece can support without exceeding the working unit stress.

Safety device: An installation designed to protect the operator or other persons. E.g., shields, grass-catching equipment, deflectors, covers for chains, belts, drive shafts, etc.

Safety factor: The degree of surplus strength over and above normal requirements, which serves as insurance against failure.

Safety hitch: A hitch incorporating a device to avoid breakage when an implement works against an abnormal resistance.

Safety valve: 1. An automatic valve, which opens and relieves the pressure when it reaches a predetermined value, thereby protecting the system and operator. 2. A safety device for allowing steam or water to escape from a boiler when the pressure may become dangerous. Usually adjusted to permit not more than 5 pounds of pressure above maximum allowable working pressure of the boiler.

Dispersion

Measure of central tendency tells about the central position of the series. They do not throw like on the formation of series because in some cases, two series may have a same measure of central tendency but differ in their composition. In order to study the formation, composition, structure and scatteredness of the items of the series, measure of second order are necessary. The measure of second order will give idea about the formation of the series. As the representation of a series on the basis of its measure of central tendency is not sufficient but when a series is represented on the basis of its measure of central tendency as well as its measure of dispersion, then it will give the complete adequate representation of the series. Therefore, it is defined as the extent or degree of which data tend to spread around an average is called the dispersion. It is also known as variability or measure of second order.

Characteristics of an ideal Measure of Dispersion

An ideal measure of dispersion should possess the following properties:

1) It should be rigidly defined i.e. it has a fixed and finite value

2) It should be easy to understand

3) It should be easy to calculate

4) Its calculation should be based on all the observations

5) It should be capable for further algebraic treatment

6) It should not be affected by extreme values of the observations

7) It should be least affected by fluctuations of sampling

1.    Introduction
    
2.    Edible coatings used in Seafood Products
    2.1    Pre-dust
    2.2    Batter
    2.3    Breading
    
3.    The Coating Process
    3.1    Portioning
    3.2    Pre-dusting
    3.3    Application of batter
    3.4    Application of breading
    3.5    Pre-frying / Flash frying
    3.6    Freezing
    3.7    Packing and storage
    
4.    Coating Process Equipment
    4.1    Forming machine
    4.2    Pre-dusting machine
    4.3    Batter application equipment
    4.4    Breading application equipment
    4.5    Fryers
    4.6    Spiral freezers
    
5.    Coating Process Lines
    5.1     Single line breading system
    5.2     Tandem line breading system
    5.3     Tempura or batter-fry  Line breading system
    5.4     Tempura-Japanese Line breading system
    
6.    Coated Fishery Products
    6.1    Fish fingers
    6.2     Coated fish sillets
    6.3     Fish mince based coated products
    6.4     Coated shrimp products
    6.5     Coated squid products
    6.6     Coated bivalve products
    6.7     Crab claw balls
    
7.    Common Quality Problems Encountered during the Coating of Seafood
    7.1     Voids
    7.2     Blow off
    7.3     Pillowing
    7.4     Tailings
    
8.     Innovative Processes in the Production of Coated Products
    
References