eChapters

Orchids belong to the family Orchidaceae, one of the largest and most diverse families of flowering plants, with over 28,000 species and more than 100,000 hybrids worldwide. They are renowned for their exotic beauty, structural diversity, and ornamental value. Orchids, a diverse and prized group of ornamental plants, are sensitive to a variety of insect and mite pests. These pests affect orchids grown both under protected conditions (greenhouses, polyhouses) and in open environments.
Distribution: Kerala, Tamil Nadu, Karnataka, West Bengal, Assam, Sikkim, Maharashtra
Biology: Eggs are laid under the female’s shell and may remain after death. Crawlers are mobile and settle to feed, secreting protective coverings. Females remain stationary; males, where present, are short-lived and winged. Multiple overlapping generations per year occur under warm, humid conditions. Crawlers are the most susceptible to control treatments
(Smith et al., 2018).

Cells divide and reproduce in two ways: mitosis and meiosis.
Mitosis is a process of cell division that results in two genetically identical daughter cells developing from a single parent cell.
Meiosis, on the other hand, is the division of a germ cell involving two fissions of the nucleus and giving rise to four gametes, or sex cells, each possessing half the number of chromosomes of the original cell.Mitosis is used by single-celled organisms to reproduce; it is also used for the organic growth of tissues, fibers, and membranes. Meiosis is found in sexual reproduction of organisms. The male and female sex cells (i.e., egg and sperm) are the end result of meiosis; they combine to create new, genetically different offspring. 

Introduction

Plant protection in India is mainly based on use of pesticidal chemicals. Chemical control is one of the effective and quicker methods in reducing pest population where farmer gets spectacular results within a short time. However, indiscriminate use of pesticides results in a series of problems in the agricultural ecosystem mainly the development of resistance in insects to insecticides, resurgence of treated population, environmental contamination and residue hazards. Destruction of natural enemies of insect-pests, expenses on pesticides etc. contributed to a new way of thinking concerning pest control practices i.e. integrated approach of pest control. IPM was first proposed by Stern and his collegues for integration of biological and chemical control measures. This is not altogether a new concept; it was practiced before the advent of modern chemicals. The date of sowing the crop were carefully studied to ensure that crop was not being planted when it would encounter severe pest problems, cultural practices such as ploughing after harvest, timely weed control, well timed irrigation and reduced use of fertilizers all contributed to reduce pest population. Most of these methods were curtailed when modern pesticides become available it was thought that these chemicals alone could control pests, but now we know that this is not possible and a single method of approach in pest control is not feasible. An integrated approach of pest management (IPM) was devised on the principles of managing the pest rather than eradicating them. IPM is a broad ecological approach for managing pest problem encompassing available methods and techniques such as cultural, biological, mechanical and chemical in a compatible manner to reduce and maintain the pest problem below the economic injury level.

Theory

Extension Teaching Methods: Methods by using them new information can pass freely between the extension worker and rural communities. Extension education is mainly concerned with the dissemination of useful and practical information relating to rural life and helping the rural people in the practical application of such knowledge to rural situations. Extension teaching methods can be classified on the basis of:

Introduction

R is one of the most popular platforms for data analysis and visualization currently available. It is free, open-source software, with versions for Windows, Mac OS X, and Linux operating systems. R is a language and environment for statistical computing and graphics, similar to the S language originally developed at Bell Labs. It’s an open source solution to data analysis that’s supported by a large and active worldwide research community. But there are many popular statistical and graphing packages available e.g. Microsoft Excel, SAS, IBM SPSS, Stata, and Minitab etc., however R has many interesting features so why it is mostly followed by researchers and academicians. Few of the major features of R are given below:

Anthracnose

Colletotrichum lindemuthianum, Glomerella lindemuthiana Shear [teleomorph]

Economic Importance

• Anthracnose is an important disease in Kenya, Uganda, Brazil, Argentina, Mexico, Guatemala, Costa Rica, Nicaragua, India, Peru, Ecuador, and Colombia .
• The disease causes huge losses in temperate and subtropical zones.
• Yield losses of 95% have been recorded in Colombia and over 92% in Malawi.
• Anthracnose also affects seed quality and marketability of the crop.

The blood is considered as the connective tissue, and consists of fluid component called plasma, and cellular component. Cellular component
consists of erythrocytes, leikocytes and thrombocytes. Blood cells produced during different stages of life (prenatal and postnotal) differ in morphology
and function. The primitive erythrocytes (Red blood cell) are produced on yolk sac, and later from liver, spleen and bone marrow.

Introduction Turnip (Brassica rapa subsp. repifera L.) is a root vegetable grown in temperate, subtropical and tropical regions of India that is commonly grown for its edible root and leaves. The root is typically white or cream-colored with a slightly purple or pink top, and has a slightly sweet and earthy flavor. The leaves, which are also edible, have a slightly bitter taste and are typically used in soups, stews, and salads. Turnips are a coolseason crop and are typically planted in the spring or fall. They are hardy and can tolerate frost, making them a popular choice for fall and winter gardens. Turnips are a very nutritious vegetable, they are a good source of vitamin C, fiber, and potassium, as well as other minerals and vitamins. They are also low in calories and high in antioxidants. The root contains a compound called glucosinolate, which has been shown to have anti-cancer properties.

Introduction

Fisheries management is the scientific approach that is heavily influenced by ecosystem theory but primarily focuses on fishing activity. In inland waters, it expanded from wildlife management and involved direct intervention in habitat and species composition. (Lackey, 1999) In marine ecosystems, management strategies focus on controlling fishing while using indicators for ecosystem and resource status. It is an integrated process concerned with collecting information, inspecting, organizing, decision-making, resource allocation, and regulation enforcement. Its goal is to sustainably utilize fishery resources for human livelihood, food, and recreation.

1.1 Evolution of Factory System
Family-run cottage businesses transformed to the factory system, which employed a division of labour and machinery-based manufacturing process, during the Industrial Revolution. At the start of the Industrial Revolution in the late 1700s, the factory system was initially implemented in Great Britain and quickly extended around the world. The employment of machinery, initially propelled by steam or water and subsequently by electricity, is the primary feature of the factory system. When cotton spinning was mechanised, the factory system spread widely. The factory would receive raw cotton, spin it, bleach it, dye it, and weave it into finished cloth. Before the factory system, many goods, such as shoes, were crafted by expert artisans, who would typically create an entire item by hand. By contrast, factories employed a division of labour whereby most workers were either unskilled workers who moved materials and finished things or low-skilled labourers who operated machinery. From the textile industry, the factory system expanded to other sectors of the economy. To produce metal, small local forges and blacksmiths were replaced by massive furnaces and mills. Eventually, machines took the position of skilled artisans in most of the items that were produced.
1.2 Need of Products Made by Industries
As time passes, the need of the products manufactured by various industries grows exponentially. This is mainly to give comfort to the people in their day-today life. Take the case of cycle, which helps people to move from one place another place. Later, it has been partially replaced by powered motor cycle, which serves the same purpose, but with power using fuel. This gives the comfort of travelling long distance in less time. Presently, there are high powered two wheelers, which can travel at a speed of more than 100 km per hr. If one compares the growth of the technology from cycle to high powered two-wheeler, there is a tremendous improvement in terms of end uses to satisfy customers. The goods that are produced by the industries are classified into consumer goods and industrial goods. Consumer goods are completed items that are sold to and utilised by customers, whereas industrial goods are raw materials used to produce other products. Industrial products are purchased and utilised for

Mites are small arthropods belonging to the subclass Acari (also known as Acarina) and the class Arachnida. The scientific discipline devoted to the study of ticks and mites is called acarology. In soil ecosystems, mites are favored by high organic matter content and by moist conditions, wherein they actively engage in the fragmentation and mixing of organic matter (Nyle and Ray, 2009). Mites are among the most diverse and successful of all the invertebrate groups. They have exploited an incredible array of habitats, and because of their small size (most are microscopic), go largely unnoticed. Many live freely in the soil or water, but there are also a large number of species that live as parasites on plants, animals, and some that feed on mold. It is estimated that 48,200 species of mites have been described (Halliday et al., 2000).

• What is Meant by the Term Expert?
• Building Blocks of Expert Systems
• Designing Expert Systems in Problem Solving 
• Applications of Expert System
• An Expert System for Decision Problem
• Advantages of Expert System
• Cases of Expert Systems in Agriculture

1. Emergence and history of the concept of gender in development

In a chronological point of view it was the period of late 1960s to mid1970s that marked a turning point in development that saw the emergence of gender as an issue of concern. It was during this period that many important publications on psychology of women and gender roles started its manifestation. However, the recurring theme in most of these publications focussed the white male bias in research and research interpretation. Yet, these research publications served as a platform for a thorough discussion of the biological and social factors that contributed to the understanding of psychology of women. The book entitled, The Development of Sex Differences, edited by Maccoby (1966), can be seen as a pivotal moment in the field of gender psychology. The book with several chapters that lay the foundations of children’s gender development focused on theories of gender development. The publication of the book Man and Women, Boy and Girl in the 1970s put forth an advanced theory about gender identity and suggested that social factors played a more significant role in gender identity and gender roles. This sparked the debate of nature - nurture issues which are still significant to this very date. It’s during the same decade that scholars started to challenge the conceptualisations of masculinity and femininity and migrate from the unidimensional simplistic models of bipolar opposites.

Contributions of Carl Gustav Jung (originally Karl Gustav Jung) also had a great role in this migration. Carl Jung’s school of analytical psychology, proposed the concepts of anima and animus. These were part of his theory called collective unconscious which suggests that every woman has an unconscious masculine realm known as animus and every man has an unconscious feminine side known as anima. He postulated that this personal unconscious symbolized prototypical masculine or feminine principles and not an aggregate of either father or mother. It had the potential to transcend to the personal psyche and influence the behavior.

Introduction

Global plastic production is on rise while the production in 1950 was 1.3 million tonnes wherein 359 million tons of plastic waste generation was recorded in 2018. It is predicted that the increase in plastic waste generation will reach around 250 million metric tonnes by 2050 (Haque and Fan, 2022). Plastics are now ubiquitous and has turn out to be the most dominant marine litter, which is an emerging global concern today. According to the UNEP, United Nations Environment Assembly 2017 estimates, annually around 4.8 12.7 million metric tonnes of plastics are introduced into the oceans (Haward, 2018). Owing to their lower costs, lightweight, durability and strength, virtually everything and everywhere are plastics.

Modern and transgenic breeding approaches consist of modern plant breeding triangle, high-throughput phenotyping (HTP), marker-assisted selection (MAS), marker-assisted backcrossing (MABC), genomic selection (GS), genome-wide association study (GWAS), and genome editing. MAS accelerates trait identification through DNA markers, improving efficiency in selecting plants with desired traits. MABC employs molecular markers to facilitate gene introgression from donor parents (DPs) to superior recurrent parents (RPs). GS employs genome-wide markers to predict performance, revolutionizing breeding by considering both major and minor-effect quantitative trait loci (QTLs). Genome editing techniques like CRISPR-Cas9 (clustered regularly interspaced short palindromic repeats associated protein 9) enable targeted gene modifications for desired traits. Genome editing involves selecting target genes, designing guide RNAs for Cas9, and introducing the CRISPR-Cas9 system into plants. This technology has been utilized to enhance crop productivity, sustainability, and disease resistance. Transgenic crops are designed to carry specific traits, such as pest resistance, virus resistance, abiotic stress tolerance, and nutritional enrichment. Agrobacterium tumefaciens is highlighted as a tool for transgene introduction, offering advantages like low copy number integration and stable expression. Genetic engineering remains a promising avenue for creating disease-resistant crops and ensuring global food security.

3.1. Natural cross-pollination

Breeding procedures in any plant species of economic importance are guided by its reproductive system particularly, pollination mechanism. In the cereal crops such as maize, pearl millet etc., where cross-pollination is facilitated by wind, the breeders have developed schemes for commercial exploitation of dominance and epistatic genetic variation through hybrid and population breeding. In contrast in self-pollinated crops, the efforts are always made to exploit additive genetic variation primarily through pedigree and mass selection.
 
In pulses, self-pollination is a rule and pigeonpea is no exception. However under field conditions, occurrence of hybrid plants in the populations is not uncommon; and it happens due to some degree of natural out-crossing that took place in the preceding generation. This type of partial natural out-crossing in pigeonpea is affected by a variety of insects (Fig 10) which forage on its large flowers to collect the nectar. These minor incidences of out-crossing are the primary source of varietal deterioration. Recently, the pigeonpea breeders converted this constraint into an opportunity for genetic enhancement of yield through exploitation of hybrid vigor and developing commercial hybrids.

1. Introduction

For a proper understanding and analysis of women’s position in India’s rural economy, we require adequate and good quality data. This chapter examines the limitations of gender-disaggregated data on the rural economy of India with respect to three aspects: the ownership of land and other assets, participation in the rural workforce, and women’s share of agricultural incomes and earnings. In approaching the need for better data on gender, the following features of gender statistics as identified by UN organisations should be kept in mind (Corner undated)

Introduction

Robotics is a branch of engineering and science that deals with robot design, construction, operation, and uses. A robot is a machine that is capable of carrying out a complex series of actions autonomously or semi-autonomously, typically programmed by computer software or controlled by remote operators. Robotics technology combines various disciplines such as mechanical engineering, electrical engineering, and computer science to create machines that can interact with the physical world and perform tasks that would otherwise be difficult or impossible for humans to accomplish. The term "robot" was initially brought to public attention by Karel Capek, a Czech writer, in his play Rossum's Universal Robots, which was published in 1920.

Quantification of DNA is an essential step after its extraction in conjunction with the confirmation of the quality. NanoDrop spectrophometer is a powerful instrument in determining both purity and concentration of nucleic acids on the basis of absorbance values obtained by adding small amount of sample (1-2 μl) on the measurement surface.

Principle: The instrument works on the basic principle of spectrophotometry, which takes highly sensitive fluorescent measurements of the microvolumes. It takes use of microvolume sample retention technology based on surface tension property of the liquid and fibre optic technology. Together, these features make it possible to detect sample even in microlitres, which is much more than the traditional method that need cuvette-sized sample volume. The concentration of nucleic acid sample is normally determined by measuring its absorbance at 260 nm.

Post-traumatic bleeding, caused by accidents or battlefield injuries, is a major worldwide issue due to the associated high fatality rate. Significant efforts have been made to develop hemostatic medications that help reduce post-traumatic bleeding. The use of naturally abundant and highly biocompatible polymers, such as alginate, can have a substantial impact on the efficacy, safety and cost effectiveness of hemostatic medicines.We haveexaminedthe effectiveness of developed hemostatic hydrogel (SA-CZ) containing calcium (Ca2+) and zinc (Zn2+) in treating low-pressure bleeding wounds with the added benefit of promoting faster wound healing. The hydrogel nature of the hemostatic formulation poses limitation as hemostatic material due to its fluid absorption capability. Therefore, we converted the formulation in the form of dry formulation. Further, we explored the use of dry hemostatic particles (SA-CZ DHP) made from sodium alginate supplemented with Ca2+ and Zn2+ to manage excessive blood loss after post-traumatic hemorrhage.SA-CZ DHP showed substantial in-vitro efficacy, as observed by the significant reduction in coagulation time with better blood coagulation index (BCI) and no evident hemolysis in human blood. SA CZ also showed enhanced cellular migration (1.58-fold) in-vitroand improved wound closure (≈70%) as compared with betadine (≈38%) at the 7th-day post-wound creation in-vivo (p<0.005).The safe SA-CZ DHP showed high absorption and accelerated blood clotting kineticswith reduced coagulation time (≈70%, p<0.0001) in whole human blood. SA-CZ DHP significantlyreduced the mean blood loss (≈90% in SD rats tail incision), and bleeding time (≈60%in BALB/c mice tail incision) was at par with commercially available Celox™hemostatic granules.