eChapters

7.1 Introduction

Garden designing is an important and crucial step as whole aesthetic view of the garden depends upon it. A beautifully designed garden can attract plenty of viewers as well as fauna while a poorly designed garden can destroy the view of the garden as a whole. So, while designing a garden all the basic principles and elements of gardening should be kept in mind.

7.2 Steps in Preparation of Garden Design

Site identification

Generally, the site for garden development is provided by the client itself. So, in this case we should go for site analysis step directly. Site identification is always a choice of client/human. If landscape architect has liberty to identify a land for garden establishment, he should identify the site as per choice of the client, usage and special considerations of the client.

INTRODUCTION

Rubber cultivation in regions extending from 10°N to 10°S latitude is known as the traditional region and the areas other than its natural climatic origin is termed as the non-traditional region. Northeast India comprises majority of the non-traditional areas in India with major climatic constraints like high seasonal rainfall, excessive precipitation and to some extent dry conditions. These areas extending from 22 to 29^°N latitude, holds promise in extending rubber cultivation because of its exceptional climatic make-up and abundant amount of annual precipitation (2000 mm) distributed over a fair period of time.

This perennial crop generally yields latex rubber at the 7th year after planting (with an economic life span of 20 years), although the period (immaturity period) it requires, is higher in the non-traditional region (Rubber Growers Companion, 2006). This immaturity period has also been shown to reduce with water availability in sub-humid climates (Vijayakumar et al. , 1998). Harvest of this crop is by tapping. Tapping is a process of controlled wounding during which thin shavings of bark are removed, thus opening the latex vessels which exude latex. Dry rubber yield is obtained after the latex is coagulated and rolled into sheets (about 500gm) which is then smoked and dried.

Need for systematic mapping and hazard zonation is emphasized in this chapter. Though prevention of natural disaster is not possible, its destruction could be minimized through implementation of effective hazard management system. With this motive, the coastal region between Tangapatnam and Ovari, Tamilnadu State has been classified into various categories of vulnerability based on its response to the 26th December 2004 tsunami. Based on the extent of seawater inundation and coastal geomorphic features, we have assessed the tsunami impact and estimated the behavior of the beaches in case of similar havoc in future. This study had shown that the maximum seawater inundation recorded in the study area is 750m in Colachel and the minimum is 100m in Kadiapatanam, Mandakadu and Vaniakudy areas. Chinnamuttom, Kanyakumari, Manakudy, Pallam and Colachel areas are under high risk.

INTRODUCTION

On 26^th December 2004, tectonic disturbances happened near Sumatra Island with an intensity of 9.3 in the Richter scale wrecked havoc on southwest part of India. In addition to inflicting life and infrastructure loss, the resultant tsunami event had also eroded severely the coastal region and modified topography of beach and shallow coastal regions. It did raise the concern of scientists and emergency planners about the impact of larger earthquake and consequent tsunami should there be any recurrence of such event. Despite becoming aware of tsunami hazard, there has been confusion about areas at risk and areas of safety. This chapter is an attempt to assess the vulnerability of part of Tamilnadu coast based on its geomorphological conditions and the impact of recent tsunami. The hazard maps have been generated and are intended for educational purposes, to improve awareness of tsunami hazards and to encourage responsible emergency planning efforts by illustrating the range of possible tsunami events.

Weed monitoring is conducted to detect significant weed problems, rank them for relative severity and sort them by management type annuals, biennials, perennials, grasses and broadleaves. Weed monitoring provides information to tailor weed management efforts that reduce the impact of the weeds. The primary objective of weed survey and mapping is to accurately identify and delineate land with populations of unwanted plants. These surveys are conducted so that scientists and managers can predict those areas potentially subject to weed invasion; understand the biology of the invasion process and determine means by which weeds spread; develop, implement and evaluate weed management plans; assess the economic impact of weed invasion and increase public awareness, education and weed management efforts. Weed survey information is collected and compiled into maps showing the distribution and severity of infestation. Weed monitoring involves repetitive surveys to track weed populations over time. A standardized system of weed surveying and mapping is necessary to provide consistently reliable information that can be compared from year to year. Further, a standardized system allows weed survey data to be incorporated into a state wide weed survey database for the production of state wide noxious weed maps.

DEFINITION OF ENTREPRENEUR & ENTREPRENEURSHIP

Entrepreneurs: The word ‘Entrepreneur’ is derived from the French verb ‘ENTREPREDRE’, which means ‘to undertake’. The term is used to refer to anyone who undertakes the organizarion and management of an enterprise with independence and risk as well as the opportunity for profit. An Entrepreneur is a person who has a possession of any enterprise or venture and accepts significant accountability for the inherent risk and outcome.

Definitions of Entrepreneurs by Several Social Scientists are as follow

According to J.B. Say: An Entrepreneur is an economic agent, who unites all means of production, such as- Land, labour and capital to produce products.

1. The botanical name of West Indian birch is
   1. Bursera simaruba
   2. Bursera serratea
   3. Bursera gumifera
   4. Bursera javanica
2. The following genus is commonly known as khus
   1. Cymbopogan
   2. Chrysopogan
   3. Ocimum
   4. Apium
3. Ceylon citronella indigenous to
   1. India
   2. China
   3. Central Africa
   4. Ceylon

1. Sample: One or more units selected from a population of units, or a portion of material selected from a larger quantity of material
2. The Standard Operating Procedures (SOPs) should contain full working instructions as well as information on applicability, expected performance, internal quality control (performance verification) requirements and calculation of results. It should also contain information on any hazards arising from the method, from standards or from reagents.
3. Analytical Samples: The quantity of the analytical sample to be used is usually indicated in tests and assays. Unless otherwise specified, the quantity used may deviate by 10% from that stated. All quantitative determinations should be conducted on triplicate test portions and in these cases, the amount actually taken should be accurately weighed or measured and the result of the analysis calculated on this exact quantity. When substances are to be “accurately weighed” in a test or assay, the weighing is to be performed in such manner as to limit the error to ± 0.1% or less. Quantities smaller than 100 mg should be weighed to the nearest 0.1 mg.

There are many types of intellectual property and its type varies from country to country. The most common types are patents, copyrights, trademarks, design and trade secrets. Intellectual property is an intangible creation of the human intellect and this intangible nature of intellectual property faces problems in comparison of traditional property like land or goods. Unlike traditional property, intellectual property is not dividable therefore a number of people can consume an intellectual good without its consumption. In addition, investments in intellectual goods suffer from appropriation problems, for instance Landowners can surround their land with a robust fence and hire armed guards to protect it, but creators of intellectual property cannot do that to stop their first buyer from replicating it and selling it at a lower price.

Introduction

Modern agriculture has been of great help in alleviating hunger from the world, because the world population more than doubled itself during the last half of the 20th century; it increased from 2.5 billion in AD 1950 to 7.1 billion in 2012 (USCB, 2013). It is predicted that the world population will again double itself by the end of the 21st century and will touch the 12 billion mark. Most of this increase in population has been, and will be, in the developing countries in Asia, Africa and South America. India occupies 2.4 percent of the total land area of the world, but supports 16.7 per cent of the world population. Like many other developing countries in the world, population in India is increased from 345 million in 1947 to 1210 million as per the 2011 census with a growth rate of 1.76 during last decade. Therefore, pressure on land has been mounting up at an alarming rate. Population growth coupled with live stock population expansion, urbanization and industrialization are major contributory factors to it. The unscientific and unplanned exploitation of this limited resource takes its toll in terms of degrading the land. A large proportion of the land area shows clear evidence of advanced and continuing degradation seriously affecting the country’s productive resource base (Abrol and Sehgal, 1994). Jammu & Kashmir and  Nagaland  have maximum share of their land (94%) under degradation. This is primarily due to large areas under mountains, cold deserts and other such degraded lands. In the agriculturally prominent states like Uttar Pradesh (63%), Madhya Pradesh (50%) and Karnataka (46%) (Shalander Kumar, 2011) the extent of land degradation is of great concern and posing a big threat to the natural resources, resulting in almost 5 billion tonnes soil and 6 million tones of nutrient loss every year (Singh, 2009).

1. Introduction

Rasogolla is a sweetened dairy product which is made from milk mainly from casein protein. Generally rasogolla is made by heating the raw milk around 80-850C ,then slowly cool the milk around 650C and acid coagulation of the milk is done. Then separate the channa (mainly casein) and whey, and drained the whey followed by the pressing of the channa to remove the excess water. Then channa is thoroughly kneaded and are rolled to balls and cooked in sugar syrup and get the rasogulla. Total value of 1000 billion for Indian dairy output in 2001, the output of traditional dairy products is estimated at over 400 billion. The share of the organized sector in the indigenous products is at present only 50 billion only (Patil, 2005).

This chapter is an attempt to introduce basic facts about earthquake generation and the role of earthquakes in triggering secondary geohazards. Earthquake, unlike manyother geohazards is yet to be fully understood towards occurrence and magnitude for better mitigation measures. Though unpredictibility of this hazard makes it dangerous, earthquakes seldom kill lives. Instead, poor ability of man-made structures against ground-shaking waves has been the real cause of life loss and damage to property in most of the earthquake incidences. Furthermore, earthquakes generate secondary geohazards such as landslide, failure of dams and reservoirs, etc. Thus, earthquake, as a natural hazard has its own characteristic way of potential impactand hence classifying vulnerability of different regions and creating awareness on potential impact among common public is essential.

INTRODUCTION

The term “earthquake” denotes “shaking/vibration/trembling/ quivering/shuddering/ wobbling of Earth”. Earthquake is the quickest and most unpredictable natural hazard. It is nothing but a series of suddenly generated elastic waves occurring in the Earth due to internal and/or external causes from shallow (few kilometers) to about 700 kilometers depth. It is a form of motion of wave energy transmitted through the surface layer (crust) of the Earth. One generalization that can be made out of scientific and mainstream media information about earthquakes is that, “earthquakes seldom kill; but the associated phenomena such as landslides, flooding, volcanic eruptions and collapse of natural and man-made structures cause the real damage to lives and property”. This chapter is an attempt to describe the basic elements of earthquakes and few mitigation measures.

Introduction

Okra (Abelmoschus esculentus L. Moench) also known as lady’s finger or bhendi, belongs to family Malvaceae. Tender fruits are used as vegetables and thickening of gravies and soups, because of its high mucilage content. The roots and stems of okra are used for cleaning cane juice (Chauhan, 1972). In okra several pest may damage the tender fruit that leads to reduction in yield which can be controlled by holistic approach to develop sustainable agriculture. There are several ways among this the Biointensive integrated pest management (BIPM) is one of the best way to discourage the development of pest populations and keep pesticides free so that it makes economically justified to farmers, reduce risks to human health and the environment. Biointensive integrated pest management (BIPM) is essentially a component of integrated pest management which helps to reduce the dependence on chemical pesticides thereby preventing ecological deterioration. The major elements of this approach includes many factors viz., host plant resistance, use of beneficial organism, agronomic practices, biopesticides, parasitoids, predators, plant exudates etc.

6.1 INTRODUCTION

Presently, pressure on productive land is greater than ever before and will be further more in years ahead. Per capita arable land is projected to decline from about 0.23 ha in 2000 to about 0.15 ha by 2050 (Lal, 1991). The global demand for food is projected to increase by 1.5 to 2 times due to ever increasing population and also due to demand for richer diets. On the other hand, volatility in the cost of agricultural inputs and the income generated from farm products leads to instability in the farm economy. Moreover, in conventional system, agriculture is practised for uniform application of fertilizer, herbicide, insecticides, fungicides, and irrigation, without considering spatial variability. In some cases, there is excessive use of nitrogenous fertilizer and pesticides, owing to air and water pollution but there are certain cases, where farmers hardly use any chemicals. Hence, to alleviate the ill effects of over and under usage of inputs, the scenario calls for the introduction of modern technologies to improve crop yield, provide information to enable better in-field management decisions, reduce chemical and fertilizer costs through efficient application, permit more accurate farm records, increase profit margin and reduce pollution.

Precision agriculture is a production system that promotes variable management practices within a field, according to site conditions. This system is based on new tools and sources of information provided by modern technologies. These include the global positioning system (GPS), geographic information systems (GIS), yield monitoring devices, soil, plant and pest sensors, remote sensing, and variable-rate technologies for applicators of inputs. Precision farming is concerned with the management of variability in the dimensions of both space and time. Aspects of precision farming, therefore, encompass a broad array of topics, including variability of soil resource base, weather, plant types, crop diversity, machinery performance and most of the physical, chemical and biological inputs used in production of a crop. These are closely linked to the socio-economic aspects of production system. Success in precision framing is directly related to how well it can be applied to manage the space-time continuum in production system. Thus precision farming is technology enabled, information based, and decision focused. It is the integration of these technologies that has enabled farmers and their service providers to do things not previously possible, at level of detail never before obtainable, and, when done correctly, at level of quality never achieved before. In our country, vast data on various aspects like soil characteristics, climatic parameters, topographic features, crop requirement in terms of consumptive use and nutritional requirements have been generated and instruments needed for recording these parameters are also available. However, applications of precision farming as a package in the farmer’s field have received little attention, although some aspects of precision farming have been prasticed. This has been primarily due to lack of awareness about the potential for increasing productivity and improving the quality of produce with minimum use of inputs.

Bitter gourd (Momordica charantia L., 2n = 2x = 22, family Cucurbitaceae, monoecious, cross-pollinated but genetically behaving like self-pollinated crop), also known as balsam pear, bitter melon, bitter cucumber, and African cucumber is rich source of vitamin C and iron and credited with medicinal use in management of diabetes. Fruits are cooked with other vegetables, stuffed, stir-fried, or added in small quantities to beans and soups to provide a slightly bitter flavor. The bitterness of most cucurbits is mainly due to cucurbitacins. The bitterness of bitter gourd is due to the cucurbitacin-like alkaloid momordicine and triterpene glycosides (momordicoside K and L) as reviewed by Behera et al. (2010). Bitter gourd is grown on approximately 340,000 hectares across Asia, with India and China accounting for more than half the production. Estimated area of bitter gourd in India is about 80,000 ha with production reaching to 10,00,000 resulting into a productivity of 12 tons/ha. States accounting for major area of bitter gourd are Chhattisgarh, Telangana, Andhra Pradesh, Orissa, Madhya Pradesh, Uttar Pradesh, Bihar, Tamil Nadu, Haryana and Assam.

With time it has been well proved that protected cultivation is a better technology to enhance productivity and quality of the crops by providing a logical and technical solution to manage the major and minor biotic and abiotic stresses encountered under open field cultivation of major horticultural crops. The effectiveness of the technology has also been observed in many parts of the world (Singh, 2013). Presently, the area under different forms of protected cultivation is around 4.5 million ha in the world. During the last two and half decades, the area under protected cultivation has increased exponentially in various countries and around Mediterranean sea.

1. Introduction

The National Agroforestry Policy of India is a comprehensive policy framework designed to improve agricultural livelihoods by maximizing agricultural productivity including animal productivity along with tree cover and mitigating climate change. The Government of India launched the policy in February 2014 during the World Congress on Agroforestry, held in Delhi. The focus of the policy is to address Agroforestry, which is an integrated system of practicing agriculture, livestock farming and forest activities on the same unit of land, storing high carbon, there by mitigating climate change. Agroforestry systems have the potential to be more beneficial than traditional agriculture and forest production practices. They may be able to give enhanced productivity, as well as social, economic, and environmental advantages, as well as a broader variety of ecological products and services. It’s important to remember that these advantages are contingent on appropriate farm management. In 2014 India became the first nation in the world to adopt an inter-sectoral policy on agroforestry, which seeks to identify the bottlenecks in expansion on agroforestry in the country and pathways to remove the constraints in a systematic manner.

Introduction

The organism’s defence against infection is provided by the intricate network of organs, cells, and proteins that make up the immune system. In general, there are two types of immunological responses seen in vertebrates: the innate and adaptive immune systems. Innate immunity is the first line of defence against any foreign molecule or pathogenic invasion. Innate immunity can be classified into physical barriers, cellular and humoral factors. The physical barriers such as scales, skin, gill, gastrointestinal tract and mucus are used to prevent entry of pathogens into the body. Fish mucus contains different enzymes, complement proteins, antimicrobial peptides and IgM that are efficient in trapping and killing of pathogens (Magnadóttir B. 2006). Cellular components of an innate immune system include a variety of immune cells like macrophages, neutrophils, opsonins, lymphokines, natural cytotoxic cells, eosinophils, basophils, mast cells, eicosanoids and cytokines. They play different roles in innate immunity with their own specific pathways to prevent pathogens in the host body. Humoral factors include growth inhibitor proteins like transferrin, interferons, enzyme inhibitors, lysin, C-reactive proteins, lectins and lysozymes (Secombes and Belmonte, 2016; Roberts, 2012).

Introduction

Corals, those captivating creatures of the underwater world, belong to the enchanting realm of Cnidaria—a diverse group of invertebrate animals. Among its mesmerizing members are jellyfish and sea anemones, which might have caught your eye in tide pools or along the shoreline. These creatures come in an astonishing array of hues, forms, and sizes, yet they all share a unique trait: a simple stomach sporting a solitary mouth encircled by tentacles armed with stinging cells.

Introduction

In the past few decades, the shrimp aquaculture industry has become an increasing disease challenge, impacting huge economic losses and sustainable development. Viruses, bacteria, and microsporidian parasites are major pathogens that threaten shrimp healthcare and currently, antimicrobial resistance (AMR) pathogens, and fungi have emerging diseases in the shrimp industry worldwide.

Naturally, invertebrate crustaceans, including shrimp, depend on nonspecific immune responses mainly involved by haemolymph and hemocytic cells. A cellular immune process involving phagocytosis, encapsulation, nodulation, and prophenol oxidase leads to melanin synthesis and humoral responses such as secretion of clotting protein, enzyme inhibitors, antioxidant enzymes and antimicrobial peptides for killing or resistance against invading pathogens. Antimicrobial peptides (AMPs) are evolutionary conserved small peptide molecules ubiquitously found in all living organisms. AMPs are an integral part of the innate immune system in various organisms. These peptides have a broad spectrum of inhibitory effects against bacteria, viruses, fungi, and parasites. Shrimp AMPs are short, molecular weight of less than 13 kDa, possess diverse structures, sizes, and biochemical features, and have an amphipathic structure with cationic or anionic properties that selectively target the negatively charged membranes of microbes.

1. Introduction to Biomedical Waste (BMW)
The waste produced at different medical facilities, including hospitals,laboratories, research centers, mortuaries, and autopsy centers is considered asBiomedical Waste (BMW). Some of the BMW is hazardous whereas some arenon-hazardous in nature. Hazardous waste includes, Infectious, Pathological,Microbiological, Pharmaceutical, Chemical, Cytotoxic and Radioactive wastematerial as described by World Health Organization (Fig. 1). Healthcarepersonnel and the general public are at risk from physical, chemical, andmicrobiological effects of hazardous waste. On the other hand, the nonhazardousBMW which are not harmful, include packaging material made upof plastic & thermocol, cardboards, paper waste etc. (Capoor & Parida, 2021).