eChapters

Introduction

Canning is the general term applied to the process of packaging a food in a container and subjecting it to a thermal process for the purpose of extending its useful life. An optimal thermal process will destroy pathogenic (disease-causing) Bacteria, kill or control spoilage organism present and have mineral impact on the nutritional and physical quality of the food. Although we thing of canning in term of steel or possible aluminium cans, the principle apply equally well to a variety of food containers such as glass jar, plastic and foil laminated pouches, semi rigid plastic tray or bowls, as well as metal cans of any one of several shapes, including cylindrical, oval, oblong or rectangular. The concept of aseptic packaging (sterilizing the food and the container prior to filling and sealing) also follows the same principles.

Introduction

Gamhian concept of development gained inspiration from villages where local resources met the optimum needs of the poorest of the poor. Gandhiji was of the view that the process of development of the Nation must begin from its villages. In a country like India, where villages are in the majority the prosperity of the Nation can only be ensured when fanners are considered as development managers. The economic liberty of individuals and villages in effect will lead to the prosperity of the Nation. The anomaly in this regard in our country can be seen in the overcrowded cities and desolated a village that is indicative of major gaps in our approach. Acute migration has created a dearth of strong hands in the villages resulting in overcrowded cities, putting tremendous strains on its infrastructure. Thus economy and-ecology of most regions in the country, both rural as well as the urban areas are threatened.

The Independence has been attained by the nation 65 years ago but Economic Slavery is pervasive everywhere in the Rural India. There must be an Economic Independence drive in the country. This will check rising Economic inequity between rural urban regions.

2.1 Historical Development

We have seen in Chapter 1 that modeling is about establishing cause effect relationship. Perhaps one of the earliest attempts in this direction is made as early as 1848 in Germany where it was tried to establish a relation between purity and pollution to the occurrence of certain biological organism. But as far as water quality modeling is concerned the first major breakthrough in this direction is the effort of Streetor and Phelps (1925) in oxygen sag curve. They developed model for estimating DO and BOD in Ohio River. The work of O’Conner (1962) for bacteria models are major milestone in pre-computer era modeling.

With the advent of computer during 1960s complicated kinetics and time variable simulation came into being. Most of the workers presented their efforts in terms of linear programming based water management models concerning waste discharge. Thomann(1963) has formulated linear programming based models for dissolved oxygen in an estuary. So a stage is set for study of eutrophication through modeling, but the problem is determination of values of various parameters in these equations.

During 1970s models expanded in terms of complexities mainly because of enhanced computational facilities. Two dimensional and dynamic framework has started replacing one dimensional steady state configurations. In the same year, Di Toro presented an analysis of the steady state two dimensional concentration distribution that results in the horizontal plane from the continuous discharge of a non-conservative substances (DO and BOD) into an infinite body of water.

Abstract

Irrigation tanks (Traditional water harvesting structures) are our heritage handed over to us by our ancestors and are the lifelines of villages. Tanks are small irrigation structures predominantly serve small and marginal farming communities to sustain the agriculture production by supplementing the monsoon rains. There will be festivities in the villages if its irrigation tanks get filled. A proper maintenance of the tanks will prevent famine, starvation and unemployment and bring in prosperity. In most of the Southern states in India, the major threats to tanks are mainly from the encroachers, inefficiency in the functioning of tank system and improper use by the government itself. Tank irrigation in Andhra Pradesh has played a vital role in the development of its agricultural economy. There are around 79,000 small and minor irrigation tanks providing water for irrigation and domestic use, supporting grazing land, fuel wood growth and ground water recharge. Many of these tanks are hydrologically linked in chains (called tank cascades) that cut across administrative boundaries. With deteriorating tank systems, marginal and small farmers are increasingly at the mercy of monsoon and are forced into a cycle of deprivation and debt. These ancient irrigation systems still function as a crucial element in supplying water for agriculture, and they constitute one of the richest sources of wetland biodiversity in the country. A tank system in a cascade has a small reservoir catchment, the reservoir, a strip of trees downstream of the reservoir that act as wind-breaking barrier, paddy fields, and the village. The village tanks play significant role in food production sector and provide employment in the rural sector. In addition to providing irrigation water, the tanks made the micro-climate pleasant and cool, provided a rich biodiversity and agro-biodiversity

Abstract
The assistance/credit provided by banks is classified as priority sector lending and non-priority sector lending. Priority Sector Lending (PSL) is one which has got the order of preference over other sectors by the target groups in availing bank credit as per the directives of RBI. It is one of the important steps taken by the government for the cause of rural development. It involves rising the socio-economic status of the rural population on sustainable  basis through the optimum utilization of local resources. In the words of Planning Commission1 rural development could be achieved through strategies, policies and programs  for the development of rural areas and the promotion of activities carried out in such spheres as agriculture, forestry, fishing, rural crafts and industries, the building up of social and economic infrastructure, with the ultimate aim of achieving a fuller utilization of available physical and human resources and earns higher income and better living conditions for the population. According to Desai2, the preamble to the Bank Nationalization Act, 1970 clearly lays down that the banking system has to function in alignment with priorities and objectives. According to Srinivasan3  during 1969-89, the PSL has considerably increased and radical transformation has taken place in the allocation of pattern of credit. The trend analysis in between 1969-89 indicated that banking system has achieved a good blend of social and commercial banking.

Abstract

With increasing population and subsequent human requirements; the generation of municipal solid waste (MSW) has increased all over the world. In India, the safe disposal of the municipal solid waste still remaines a problem for the authorities concerned. Depending upon the nature and type of the MSW, there are physical and chemical methods for the disposal of the waste, but these methods have their own limitations. Those limitations may be overcome by biological methods. Higher number of microorganisms are present in MSW which may either be pathogenic or nonpathogenic. These microorganisms may play a vital role in bioconversion of MSW into compost. The compost thus produced is useful in increasing soil fertility and reducing the concentration of the waste.

RECTAL EXAMINATION

It provides practically all the information required.

It is the simplest, accurate and reliable method with no cost involved.

Things Required

A full arm rubber sleeve with attached glove or disposable plastic glove.
A rubber or plastic apron.
Non-irritant soap or lubricant.

Introduction

Thermal processing is an important treatment for food preservation is, especially in the manufacture of shelf-stable foods with specific nutritional properties. It is also indispensable for determining the sensory properties, particularly, colour, flavour, and texture of fried, baked, and roasted products. As a result of heat treatment, chemical changes induced, and a plethora of new molecules are formed in foods, some of which have been claimed to be health-promoting antioxidants and anti-mutagens. However, reports suggest that thermal processing leads to the formation of certain toxic compounds, so-called process-induced contaminants in foods. The process-induced toxicants are certain compounds which are formed in food as a result of food processing, exert adverse toxicological effects, and cause potential health risks to humans. Acrylamide, furan, chloropropanols, heterocyclic aromatic amines, polycyclic aromatic hydrocarbons, and N-nitrosamines are some well-known examples of thermal process contaminants.

Introduction

The business models, in general are based on traditional ways of strategy formulation and implementation, leading to incremental and non- disruptive change in the nature of business and agri-industry practices. In today’s knowledge environment, we know that agri-businesses cannot survive by just running harder, but rather by running differently and “smarter” than competitors. (Seven et.al, 2005). This article suggests a sense-testing tool for the extensionists and administrators to enable disruptive innovation of extension-led business models through examples and case evidence.

Business is fundamentally concerned with creating value and capturing returns from that value. The term creating and capturing value reflects two fundamental functions that all extension organizations must perform to remain viable over an extended period of time. Successful extension organizations (SEOs) create substantial value by doing things in ways that differentiate them from the competition. The SEOs might develop core competencies, capabilities, and positional advantages that are different from those of competitors.

During his recent visit, US President Barack Obama pointed out that India is fortunate to have a youthful population with over half the population of 1.2 billion being under the age of 30. Of the 600 million young people, over 60% live in villages. Most are literate. Gandhiji considered the migration of educated youngsters from villages to towns and cities as the most serious form of brain drain adversely affecting rural India’s development. He, therefore, stressed that we should take steps to end the divorce between intellect and labour in rural professions.

The National Commission on Farmers (2004-06) stressed the need for attracting and retaining educated youngsters in farming. The National Policy for Farmers placed before Parliament in November 2007 includes the following goal: “To introduce measures which can help to attract and retain youth in farming and processing of farm products for higher value addition, by making farming intellectually stimulating and economically rewarding”. We are currently deriving very little demographic dividend in agriculture. On the other hand, the pressure of population on land is increasing and the size of the average farm holding is dipping below one hectare. Farmers are getting trapped in debt and, as real estate rates continue to rise, the temptation to sell prime farmland for non-farm purposes is growing. Over 45% of farmers interviewed by the National Sample Survey Organisation want to quit farming.

3.1    Competitive and Collaborative Research
    
3.2    The Strategy to Protecting Plants : Plant Variety Protection Act
    
3.3    IPR Issues in Biotechnological Patents Haldi, Neem and Basmati Rice
    
3.4    Patent Litigation

The 21^st century dawned with interest in the potential of electric agricultural machines. Beginning in 2000, a concept study, MELA Mobile Elektrische Leistungsund Antriebstechnik Mobile (electric power train technology)supported by universities and organizations in Germany as well as Fendt Agricutural Company (AGCO) showed a possible solution on tractor electrification with electric driven auxiliaries as well as electric CVTs and implement electrification. In 2003 the University of Hohenheim developed an electric combine harvester called Magda. With the introduction of a 42 VDC power supply system, the range of small rotational drives and servo motors could be covered. They showed that if more power had to be transmitted, threephase alternating current should be used since threephase machines had a large speed range and a large range of constant power.

During the first years of the century, longestablished transport manufacturers have been quick to see the environmental advantage of electric propulsion, be it with batteries, hybridelectric or fuel cell. With airliners, Boeing, Airbus and Tupolev quickly saw the advantage. With motorcycles, names such as HarleyDavidson, Curtiss, Ducati, Saroléa and Royal Enfield have positioned battery packs between two wheels. With trucks, Daimler, Toyota, Cummins, Peterbilt, DAF, Volvo, Leyland, Kenworth, and Isuzi, among others have taken the electric route. With buses, Alexander Dennis, Scania, Volvo, New Flyer, Van Hool, DAFVDL, Blue Bird, Heuliez, Rampinican carry their passengers more silently. It therefore seemed only logical that traditional agricultural machinery builders should make the same transition. The first to do this was John Deere, established in Moline, Illinois in 1837.

The cornea is the anterior transparent part of the fibrous tunic of the globe which has both mechanical and optical function. It functions to support the intraocular contents and transmit and refract light. Histologically, the cornea is composed of an outer stratified squamous corneal epithelium and its basement membrane, an underlying collagenous stroma, a thin acellular membrane, and an inner monolayer of cells, the corneal endothelium. In dogs, the central cornea is thinner than the peripheral cornea, whereas regional differences in thickness may not exist in cats. The active pumping mechanism of corneal endothelium and the barrier function of anterior epithelium keep the cornea in a state of relative dehydration. Compromise of either of these mechanisms will allow corneal edema to develop, with a concomitant increase in corneal thickness. Corneal ulceration is one of the most common ophthalmic disorders in veterinary medicine. Corneal ulcers are classified based on depth and ease of healing. There are several phases during the corneal epithelial wound healing process, including a lag phase where cells alter their metabolic status; a migration phase to cover the bare surface; a proliferation phase and a differentiation phase, where cells stratify and re-establish multiple layers of distinct cells. Methods of surgical treatment for canine corneal ulcers include temporary tarsorrhaphy, third eyelid flap, conjunctival pedicle graft, tissue adhesive, corneo-scleral graft and transplantation of natural or synthetic material.

Introduction Surimi and surimi based seafoods are traditional products of Japan and occupy an important position in the dietary culture of the country. Today, the largest producers of surimi are the United States, Japan and Thailand. Surimi is also manufactured in China, Vietnam and Malaysia. The process of makingsurimi originated in Southeast Asia and was further developed in Japan in the 16th century. Surimi is a product of Japanese origin, derived from a traditional Japanese way of using and preserving fresh fish. The word ‘surimi’ comes from the Japanese words ‘suru’ meaning ‘to process’ and ‘mash/mi’ meaning ‘meat’. Technically, surimi is the stabilized myofibrillar protein which is obtained by mechanically deboned fish flesh, which is washed, mixed with cryoprotectants, and stored frozen. Washing not only removes fat and undesirable matters such as blood, pigments and odoriferous substances but also increases the concentration of myofibrillar protein. A fish-based product serving the raw material for preparation of analog of seafoods like crab, lobster, scallop & other shellfish.

9.1. Introduction

The human population of the world will reach nearly 10 billion by 2050, boosting agricultural order-in a situation of humble financial development (FAO, 2017). At present, approximately 37.7% of total land surface is being utilized for crop production. From employment generation to contribution to National Income, agriculture sector is contributing a significant role in economic prosperity of the developed nations and is playing an active part in the economy of the developing countries as well. The growth of agriculture has resulted in a significant increase in the per-capita income of the rural community. Thus, a greater emphasis on agricultural sector is the need of the hour. For countries, like India, the agricultural sector accounts for 18% of GDP and provides employment to 50% of the country’s workforce. Development in the agricultural sector will enrich the rural development which will lead toward rural transformation and ultimately the desired structural transformation (Mogili and Deepak, 2018; Shah et al., 2019). The role of Artificial Intelligence (AI) has been obvious in the agricultural sector recently. The sector needs the impetus from AI based technology to maximize its yield including improper soil treatment, disease and pest infestation, big data requirements, low output, and knowledge gap between farmers and technology.

1. Introduction
Water is the most crucial input for agricultural production. Globally, more than 80% of all freshwater used by humans are consumed in agriculture and most of it are for crop production (Morison et al., 2008). Currently about 60% of production in developing countries is derived from rainfall. Though irrigation provides only 10% of agricultural water use and covers just around 20% of the cropland, it can contribute about 40% of total food production since productivity of irrigated land is almost three times higher than that of rainfed land. The Food and Agriculture Organization (FAO) has predicted a net expansion of irrigated land of about 45 million is hectares in 93 developing countries (for a total of 242 million hectares in 2030). It projected that water withdrawals by the agriculture sector will increase by about 14% during 2000 – 2030 to meet the growing food demands (FAO, 2006). It is estimated that by 2050 in India, about 22 % of the geographic area and 17 % of the population will be under absolute water scarcity. The per capita availability of water which was about 1704 cubic meter in 2010 is projected to be 1235 cubic meter in 2050 (Anonymous, 2011). Infrastructure to increase the command area and minimize the gap of irrigation potential created and utilized is the dominant component of overall investment in agriculture (Anonymous, 2011). Besides this, judicious agricultural water management assists in ensuring good returns through efficient use of fertilizers and high yielding crop varieties. Above all, water will remain as a critical input for attaining sustainability in agricultural production. India’s current water supply is approximately 740 billion m3, which necessitates implementation of judicious water management technologies to enhance crop water productivity. In recent decades the world’s population has shown tremendous growth from an estimated 2.5 billion in the 1950’s to approximately 6.7 billion till date. It is expected that reduction in the average size of land holding, declining per capita water availability, deterioration of water quality etc. will seriously affect the sustainable use of water resources and will make it difficult to accomplish the target of producing 345 Mt of food grain in 2030 and 494 Mt in 2050 AD. To achieve the targeted food production, increase in the crop productivity from the present 2.3 to 4.0 t ha-1 under irrigated conditions and from 1.0 t ha-1 to 1.5 t ha-1 in rainfed area, productivity need to be increased at individual field level. This demands efficient use of water in agriculture, which can be achieved by reducing the losses of water and increasing the water uptake by the crops and it requires quantification of different water budgeting parameters like evapotranspiration and deep percolation.

Lotus belongs to the Nelumbonaceae family and the genus Nelumbo. There are two species in this genus; Nelumbo nucifera Gaertn. distributed in Asia and Oceania, and Nelumbo lutea distributed in North and South America (Qichao and Xingyan, 2005). Although, the species nucifera is the most important (commercially and culturally), it is critical to describe the American species, evaluate its horticultural value and its potential as a source of genetic diversity. The American species, represented by Nelumbo lutea (Syn. N. pentapetala or Nelumbium luteum) is known as American Lotus, Water-chinquapin and Yellow Lotus (Sayre, 2004) and is native to the eastern and central portions of the US ranging from Maine to Wisconsin and in the south from Florida to Texas. It is one of the most spectacular and graceful aquatics among all the native plants of India. N. indica are found all over India and extend as far as Kashmir to Kanyakumari exhibiting enormous thermoplasticity and phenotypic diversity with a large number of racial variants with different shapes, sizes and colours. First Indian fossilised record of N. nucifera has been reported from the Pleistocene epoch of Kashmir. The presence of Nelumbo in the Tertiary period of Assam is reported on the basis of impressions of leaves and rhizomes found in the collection from Eocene bed near Damalgiri. These records confirm the evidence in support of the view that N. nucifera is indigenous to India.

Several diagnostic techniques are employed to asses the nutrient status of the crop. These are helpful in determining specific or multinutrient stresses and quantity of nutrients needed to eliminate the stress. Some of the techniques commonly used are:

Visual deficiency symptoms

Plant analysis

Rapid tissue testing

This chapter traces the history of the electric quadcopter commonly known as the drone, prior to its use in agriculture.

As long ago as 1493, the versatile Italian Leonardo de Vinci, painter, sculptor, machine designer often inspired by his observations of Nature, made a sketch in one of his little notebooks of a screw-like machine next to which he wrote in his mirror-handwriting:

If this instrument made with a screw be well made – that is to say, made of linen of which the pores are stopped up with starch and be turned swiftly, the said screw will make its spiral in the air and it will rise high.¹

Four centuries later, in 1863, the Viscount Gustave du Ponton d’Amécourt, President of The Society for the Encouragement of Aerial Locomotion by Means of Heavier than Air Machines, published a forty-page monograph in Paris, entitled “The Conquest of the air by propeller. Account of a new system of aviation.” In this he took the Greek words helico and pteron, meaning “spiral” and “wing”, and combined them into the word hélicoptère (helicopter). D’Amécourt and his friends were among those very few who were passionately convinced that the future of flying was with heavier-than-air machines. To prove their point, having built a fragile flying machine model driven by clockwork springs, they watched it ascend vertically for a few seconds to a height of less than 3 metres (10 feet), only to crash back to the ground.