eChapters

Abstract

Climate models predict a global average increase of air temperatures in the range of 14^°C by 2100 (IPCC 2014) - a pace exceeding that of past climatic modifications. Change in temperature is expected to influence species occurrence and distribution with up to 37% of all extant species “committed to extinction” due to climate change. These predictions, however, do not include species interactions and evolutionary change which will significantly alter the fate of species. It is therefore important to improve our understanding of host-parasite interactions and subsequent evolution in response to environmental changes in general and temperature changes in particular. Globally livestock production systems are estimated to account for around 18% of emissions. The need of hour is to draw on recent advances in climatology and epidemiology of various parasitic diseases to consider how environmental changes linked with urbanization and climate change can alter the biology of hosts, pathogens and vectors. Climate change is leading to unusual flare-up of diseases, outbreak recurrences, range expansions, or invasion into novel territories and ecosystems, concomitantly with vector or host range shifts. Higher temperatures increase the invertebrate metabolic rate, egg production amount, and feeding frequency, reducing the duration of the development periods and impacting on the number of generations per year and population abundance effecting livestock and human health and socio-economic transformation

Q.1 According to prof. R. A. Fisher “ANOVA” is not the separation of variance assignable to one group of causes from the variance assignable to another group of causes.

Q.2 The basic purpose of ANOVA technique is to test the homogeneity (equality) of several means.

Crop improvement is a continuous process. Crop improvement aims to genetically enhance, enrich and empower the crop plants with superior performance, enhanced yield level, higher quality of food, nutritional, fodder, energy produce and adaptability to climate change and crop growing environments. The intrinsic virtues of the improved cultivars could be sustained mainly through the production of the quality assured seeds endowed with genetic capabilities. The quality assured seed delivery system is through the seed chain from the basic seeds through Nucleus-Breeder-Foundation-Certified seed. Quality seed production system need to be based on genetic, breeding and seed technological protocols including field and laboratory testing to ensure very high genetic purity, true to type and superiority.

Major industries constituting the food processing industry are grains, sugar, edible oils, beverages and dairy products. The key sub-segments of the food processing industry in India are dairy, fruits and vegetables, poultry and meat processing, fisheries, food retail etc. Agro processing is the sunrise sector of the Indian economy in view of its large potential for growth and likely socio economic impact specifically on employment and income generation. India has the advantage of being one of the fastest growing economies in the world and it is the largest producer of several agricultural commodities. The food processing sector ranks first in terms of employment and number of factories in operation and third in terms of output.

In India, out of the total production of fruits and vegetables, nearly 76 per cent is consumed in fresh form, while wastage due to improper post harvest accounts for 20 to 35 per cent. Only around 2 percent of vegetables and 4 percent of fruit production are being processed. 

Theoritical aspects of design has been discussed in chapter 1. Discharging capacity of canal is

 computed by Manning Equation (1)and continuity Equation (2) (Para 1.4).

 In the Manning's equation  V  =   R2/3  S1/2 / N (Eq. 1, Para 1.4);  N and R play most important role.

 The effect of  R has been discussed in para 1.4.1, Chapter 1. In this chapter the complexities of Manning's n (or N, also known as Manning's rougosity coefficient

 or simply rougosity coefficient) and some practical aspects of composite sections and velocity in best

 Mehboob, trapezoidal or rectangular sectioned channels are discussed.

2.0 Manning's Rugosity Coefficient (n)

Value of N depends upon a number of factors such as , surface roughness, vegetation, obstructions, type of lining, age of lining, erosion and damages in lining, curves, discharging capacity , perimeters, depth of flow, velocity etc. These are discussed below and commonly adopted values of n are given in tables 2.1 to 2.3.

Introduction

Proper electrical wiring and earthing are crucial for laboratory safety and functionality. A laboratory houses several installations/equipment that demand stable/continuous power supply. Inappropriate or faulty wiring and earthing may lead to significant risks, including electrical shocks, damage to equipment, and even incidence of fire. Therefore, understanding the requirements of electrical wiring and earthing is essential for designing, construction, and maintenance of laboratory. This chapter aims to provide a basic knowledge of electrical wiring and earthing necessary for a laboratory. Importance of earthing in mitigating electrical hazards and ensuring integrity of electrical installations are also described.

Basics of Electrical Wiring

Basic understanding of electrical wiring is necessary for laboratory safety and efficient electrical functioning. The potential difference between two electrical points (negative and positive) is known as Voltage, which drives the flow of electric current. This is measured as volt (V). The rate of flow of electricity in a circuit is known as Current (I), which is measured as ampere (A). Current can be either direct (DC) or alternating (AC). Opposition/resistance experienced in the flow of current in circuit is known as Resistance (R) and it is measured in ohms (Ω). Higher the resistance means lesser the current flows at a given voltage. The rate at which electrical energy is transferred/utilized in an electric circuit is known as Power (P), which is measured in watt (W). The Power can be calculated as the product of voltage and current (P = V × I).

Abstract

As such in search of alternative to chemical insecticides against insect pest of rice resulted in identifying white muscardine fungus, Beauveria bassiana an entomopathogen out of several entomogenous fungi prevalent in rice ecosystem as the potential mycoinsecticides. The fungus has 78-87% virulence against rice hispa with  LC 50 value of 90.16. Under field situations it is required that the effectiveness of the bioagents are enhanced by combining them with compatible pesticides. A sublethal dose of a pesticide  would make the insect physiologically weak which makes it much more susceptible to the attack of the entomogenous organisms. In view of this, compatibility test was conducted with 14 different commonly applied insecticides at two different doses i.e., recommended and half of the recommended dose. In small scale field trial chloropyriphos at half of the recommended dose along with B. bassiana was the best treatment in controlling the pest along with increased yield of the crop consecutively for two years.

Abstract

The future food grain demand in India is projected to increase beyond 300 million tons by 2025. There are only two ways to meet the increasing food and other agricultural demands of the country’s rising population either expanding the net area under cultivation or intensifying cropping over the existing area. The net sown area of the country has risen by about 20 per cent since independence and has reached a point where it is not possible to make any appreciable increase. The option left is go for high cropping intensity for ahead of present of 137%. A major share of this increase is likely to come from increasing the number of crops produced per year on a given land using improved crop cultivars. Research indicates that maximum intensity of 400-500% is possible provided situation fulfills the requisite factors such as irrigation facilities, short duration varieties, mechanization and agrochemicals are available. The objective of increasing the cropping intensity will be achieved only by the inclusion of short duration varieties of cereals, identification of pulses and oilseed crops that can fit well in the cropping systems of different agro-ecologies that will ultimately improve crop productivity per unit of land making the efficient utilization of resources and will meet the objectives of crop diversification leading to food and economic security of the nation.

Completely Randomized Design (CRD)

The simplest design using the two essential principles of replication and randomization is the CRD. Suppose that we have t treatments (or t levels of a factor) under comparison and ith treatment is to be replicated r times, for i = 1,2, … t . A particular case of this is equal replication for different treatments, where r1=r2= =r6=r, so that n=rt.

Fracture in animals occur frequently and is a concern of economic importance to the owner. The practice of keeping them as pets in households rather than in sheds or in confinements have increased the chance of encountering accidents like fall from coat, terrace, limbs being trapped in drains, being hit by vehicles, dog bites etc. leading to fracture. Fracture management in small animals/small ruminants can be successfully achieved owing to their light weight; they tolerate external coaptation relatively well and can ambulate in three limbs well in order to spare the injured limb. Fracture can be repaired successfully with regional anaesthetic techniques which they can tolerate very well. The constraint of cost effectiveness can be balanced by carefully selecting the appropriate technique according to the weight and limb involved. Many economical skeletal fixation technique have been evolved which can well fit into the budget of the owner. Knowledge of simple techniques can enhance healing in cases of bone loss and management of infection.

Fracture site stabilization

Fracture repair is usually elective, hence initial support and care of the fracture is necessary to prevent further trauma and complications like communication of fracture site to the exterior through wound or sinus and chances of infection. Initial support to splint the bone not only limits the movements but also supports the soft tissues from untoward consequences. Limb splinting reduces edema and pain, preserves neurovascular supply to the limb till the day of operation and helps to transport the animal safely. Fracture to limbs caudal to mid radius ulna/ tibia can safely be stabilized by splints or full limb casts. Wood, pliable bamboo or split poly vinyl chloride pipes positioned on the caudal and lateral aspects of the limbs and supported firmly with tapes or bandages can serve the purpose. Fracture proximal to mid radius ulna or tibia should not be stabilized using splits since the fulcrum effect created due to this can augment soft tissue injury. Careful assessment of the viability of the structures caudal to fracture site should be assessed prior to a decision regarding surgery, devitalized tissue hamper healing and is a subject to be considered for amputation.

Duck farming in India is characterized by nomadic, extensive, seasonal, and is still held in the hands of small and marginal farmers. Traditionally Assam, West Bengal and Kerala are the major consumer states for duck egg and meat and one of the reasons is that duck egg and meat highly suits and impart taste for their fish based culinary preparations.

Different housing system for Duck rearing

In general, ducks do not require elaborate houses. The house should be well ventilated, dry, and rat proof. In semi-intensive system of rearing, the house should have easy access to outside run as the ducks prefer to come out during the day time, winter and rainy time. 

Introduction

High population pressure has forced us to plough 46% of our country area for food production. The present productivity of 12.36 tones/ha of fruits needs to be raised to 40.0 tones/ha by using N, P₂O₅, K₂O with other inputs, since recommended ratio is 0.75:0.50:1.00. To achieve this target, the present day requirement of 0.67 million tones N, 0.46 million tones P₂O₅ and 0.91 million tones K₂O has been raised to 1.07, 0.58 and 1.14 million tones, respectively in order to supply the recommended ratio of fertilizers to an area of 3.65 million ha growing fruits (Yadav, 1999). Similarly in vegetables, the present production level of 13.41 tones/ha to be raised to 40 tones/ha requires 1.25 million tones of N, P₂O₅ and K₂O combined at the ratio of 1.33: 0.88 and 1.00.

Structure

Structural unit of edible portion of most fruits and vegetables is the parenchyma cells and makes up bulk of cells. A parenchyma cell is rather thin walled and may be polygonal or cubical in shape.  Walls of parenchyma cells in young plants are composed almost entirely of fibrils of cellulose. In parenchyma cells of plants actively metabolising protoplast portion represents only about 5% of total cell volume. This protoplast is rather film like and is pressed against cell wall by large water filled central vacuole.  Protoplast has inner and outer semi permeable membrane layers between which is confined cytoplasm and its nucleus. 

1. Introduction

Malaria remains one of the most serious tropical diseases and kills an estimated one to two million people each year worldwide (Snow et al., 2005). Spread of drug resistance has played an important role in the occurrence and severity of epidemic diseases in the world (Majori, 2004). As a consequence of resistance to drugs such as quinine, chloroquine, primaquine and mefloquine, the vehemence of malaria has increased in many endemic regions of the world (Schlitzer, 2007; Basco et al., 1994). One of the biggest challenges to malaria control is the emergence and spread of drug resistant P. falciparum strains. Although human malaria transmitted by female Anopheles mosquitoes has four Plasmodium species as its aetiological agents P. falciparum, P. vivax, P. ovaleand P. malariae, the most widespread and severe disease is caused by P. falciparum, which transiently infects the liver before invading red blood cells of the mammalian host. Clinical manifestations occur at the erythrocytic stage and can include fever, chills, prostration and anaemia, as well as delirium, metabolic acidosis, cerebral malaria and multi-organ system failure, which may be followed by coma and death (Fidock et al., 2004; Deprez-Poulain et al., 2005, De Sa et al., 2009).The success of the natural product-based antimalarials such as quinine and artemisinin has showed the importance of plants as potential source of antimalarial agents. Consequently, numerous efforts to identify antiplasmodial activities from plants traditionally used as remedies for fever and malaria (Chen et al., 1997; Havsteen, 2002;

INTRODUCTION

In India, temperate fruits are grown successfully at locations above 3000 feet mean sea level in hilly areas of Himachal Pradesh, Jammu and Kashmir, Uttranchal, Sikkim, parts of North Eastern states like Assam, Arunachal Pradesh, Nagaland, Meghalaya etc. Mount Abu hills of Rajsthan and Nilgiris of Tamil Nadu also provide suitable agro-climatic conditions for growing some temperate fruits. Apart from apple; pear, peach, plum, apricot, cherry, almond and walnut are major temperate fruits being grown over 3.38 lakh hectares of area and play pivotal role in the economy of hilly farmers whose land is not otherwise considered suitable for traditional agriculture. They contribute about 11.5 percent of total area under fruits in the country, yet production is only 5 percent of the total. Incidence of many fungal, bacterial and viral diseases in these fruit crops is a major impediment in their successful cultivation and soil borne pathogens are of foremost importance and are responsible for premature death of the trees in the orchards. Amongst these, white root rot, collar rot, seedling blight, crown gall, hairy root are the major constraints which can cause as high as 40 percent damage in certain situations (Sharma and Sharma, 2001). Threat from the replant problem is causing concern due to its negative effect on the establishment of replanted sites due to soil sickness.

Agricultural systems are complex, and understanding this complexity requires systematic research under shrinking agricultural research resources. Field experimentation can only be used to investigate a very limited number of variables under a few site-specific conditions. The crop growth simulation models simulate crop growth, development and yield taking into account the effects of weather, genetics, soil water, carbon and nitrogen, planting, irrigation and fertilizer (e.g. Nitrogen, Phosphorus) management. Ofthe many factors that potentially affect the growth of plants, the two that are most responsive to management are water and nitrogen. It is therefore not surprising that most crop models include routines to handle responses to water and nitrogen. Less frequently do models attempt to describe limitations due to other soil constraints (Probert and Keating, 2000). In the context of integrated nutrient management, the performance of a crop model depends mainly on its ability to adequately describe the release of nutrients from diverse inputs and their uptake by the crop.

Origins and genesis of a crop simulation model

Crop simulation model approach was started near about 50 years ago, in early 1960s when early simple crop models were developed for estimation of transpiration and photosynthesis. The first step towards crop modeling was the development of simple models to estimate light interception and photosynthesis (Loomis and williams, 1963; De wit, 1965 and Duncan et al., 1967). There are many crop growth simulation models. Some are more generic in nature while others are built for specific purposes. Most of these models simulate crop growth and soil processes using daily time steps. All models are developed with some assumptions and hypotheses, and all have strengths, weaknesses and limitations for appropriate application. Well-known crop modelling groups across the world include IBSNAT/IFDC (International Benchmark Sites Network for Agro technology Transfer/International Fertilizer Development Centre) in USA, WAU/AB-DLO (Wageningen Agriculture University/Centre for Agro-biological Research) in the Netherlands, and APSRU (Agriculture Production Systems Research Unit) in Australia. The IBSNAT project was initiated in 1982, and over the past 20 years it has developed more than 15 models, including CERES (Crop Estimation through Resource and Environment Synthesis) Rice and CERES Wheat, which are available either as stand-alone models or within the DSSAT (Decision Support System for Agrotechnology Transfer) shell (Uehara and Tsuji, 1993).

16.1 Introduction

It is well known fact that planners as well as end user’s have to consider any resources as technology from economic point of view. Therefore, it is important to have techno – economic analysis of each energy source option. In the feasibility study of particular energy option, three tier judgement approaches is required, which include technical feasibility, economical viability and social acceptability. Hence in the rural energy planning programme one has to considered techno socio economic analysis of an individual energy option. Since in integrated rural energy planning, locally available energy resources are used, presuming that it is socially recognized. Hence in the IRPE project, the need and scope of techno economic analysis in terms of economic analysis of different technical feasible options, before between “economic” and “financial” analysis should be kept in mind. An economic analysis is needed to verify that a particular energy source will provide “net benefit” to society as a whole, before its final integration in the energy context, while a financial analysis integrated in the energy practices. In simple wards, a financial analysis is concerned with goods and services, money inflow and outflows and the transfer of payments. An economic analysis also considers the social benefits and costs of goods and services which are not traded in a market.

18.1. Determination of Available Micronutrient Cations (Zn, Cu, Fe and Mn) in Soil

The available micronutrient cations (Zn, Cu, Fe and Mn) can be estimated in a single extraction with diethylene triamine pentaacetic acid (DTPA) as proposed by Lindsay and Norvell (1978). DTPA has the excellent property to combine with free metal ions in the solution forming soluble complexes. The stability constants of metal-DTPA complexes make DTPA as a most suitable extractant for simultaneous complex formation with Zn, Cu, Fe and Mn. In calcareous soil DTPA extractant may result overestimation due to excess dissolution of CaCO_3, thus releases occluded micronutrient cations which are not plant available. To avoid this excessive dissolution of CaCO₃, DTPA is buffered at pH 7.3 using triethanol amine (TEA). At this pH major part (3/4^th) of TEA is present as HTEA⁺ (protonation) and exchanges for Ca and Mg ion from the soil exchange site. This increases concentration of Ca and Mg in the solution phase and suppresses dissolution of CaCO₃. The DTPA has the capacity to complex each of the micronutrient cations 10 times of its atomic weight and it ranges from 550 to 650 ppm depending on the micronutrient cation.

The amount of cation in the extract is determined on an atomic absorption spectrophotometer (AAS). The experimental condition such as shaking time, DTPA concentration, pH and temperature during shaking influence the amount of Zn, Cu, Fe and Mn extracted. Increase in shaking time and temperature markedly influence the extractability of these cations.