eChapters

Sending a message from one place to another place, which are physically separated from each other, is called Communication. The Communication Engineering or Communication Technology deals with the design and development of engineering systems to transmit information from its source, and at the same time, to receive the same information at a remote destination with reliability, accuracy and quality.

The term DNA sequencing refers to methods for determining the order of the nucleotide bases, adenine, guanine, thymine and cytosine, in a molecule of DNA. In molecular terms ,the definitive understanding of a DNA molecule comes from determining its nucleotide sequence.The function of a gene can be deduced from its nucleotide sequence,for example by comparing the sequences of genes with known functions.

The first DNA sequences were obtained by academic researchers, using laborious methods based on 2 – dimensional chromatography in the early 1970s.  Following the development of dye-based sequencing methods with automated analysis, DNA sequencing has become easier and orders of magnitude faster.  Knowledge of DNA sequences of genes and other parts of the genome of organisms have become indispensable for basic research studying biological processes, as well as in applied field like diagnostic or forensic research.  The advent of DNA sequencing has significantly accelerated biological research and discovery.

9.1. ITKS for Seed Treatment and Sowing

• Yield of almost all the crops depends on seed quality.
• Even if it is a quality seed, it should be a dried one because well dried seeds will have higher longevity and keeping quality.
• It better to change the seeds at least once in two years.
• To maintain the seed viability and prevent it from outside damage, the outer shell is not separated.
• The seeds are generally stored along with the leaves of neem (Azadirachta indica), pungam (Pongamia pinnata), notchi (Vitex negundo) and thumbai (Leucas aspera).
• Six weeks nursery period is enough for six months duration of the crop.
• Shallow sowing is followed in dry lands.
• Severing the broadcasted seeds in dry lands with soil.
• Dragging, over the fields, the thorny branches with weight over them for covering seeds the sown on dry lands.
• It is better to start planting from ‘Sani moolai’ (north east) of the field to get higher yields.
• It is better to perform sowing and planting operations during evening hours.

Indian Council of Food and Agriculture organized SEED WORLD-2019 (World Seed Trade and Technology Congress) from 18-21 September, 2019 at The Hotel Lalit Ashok, Bangalore and presented SEED INDUSTRY SCENARIO REPORT (ICFA, 2019; www.icfa.org.inwww.seedworld.in). The information as given below is largely based on this report and other presentations made during the congress, particularly one by Kapur (2019).

4.1 Introduction

Baling biomass is a crucial technique in efficiently managing and utilizing agricultural crop residue. This chapter explores the process of baling, which involves compacting biomass materials into standardized bundles for easier handling, storage, and transportation. From agricultural residues to forestry waste, the chapter delves into various types of biomass suitable for baling, the equipment used, and the benefits of this technique. It also discusses the environmental impact, economic considerations, and emerging trends in baling methods. Through in-depth analysis and practical insights, this chapter offers a comprehensive understanding of how baling contributes to sustainable biomass management and resource optimization.

INTRODUCTION

Heterotrophic organisms, such as zooplankton, use phytoplankton as food, regenerating nutrients through metabolic processes and transferring energy to higher trophic levels. Zooplankton are involved in the conversion of waste matter into animal food that may be consumed, in addition to helping to shift food from the primary to the secondary level. These species act as a bridge in the food chain, carrying energy from the primary producers, planktonic algae, to the larger predatory invertebrates and fish that eat them (Kumari et al., 2008). Macróplankton (200–2000 μm), microplankton (20–200 μm), nanoplankton (2–20 μm), picoplankton (0.2-2 μm), and femtoplankton (0.02 0.2 μm) are the different sizes of plankton (Kumar et al., 2023).

The sensitivity of zooplankton to alterations in aquatic environments is significant. Differences in species composition, abundance, and distribution of body size can be used to identify the consequences of environmental disturbances(Joshi & Joshi, 2011). A number of variables, including temperature, sunlight, ocean currents, and nutrition availability, affect plankton populations. They are vital to ecosystems because they support carbon cycling, global biodiversity, and the general health of the oceans (Cottenie et al., 2001). An evaluation of the pollution state heavily depends on the interaction between phytoplankton diversity and environmental conditions. The diversity of algae found in the Chlorophyceae family is a key sign of the quality of the water. The differences in water quality can be attributed to a combination of natural and human-caused factors. Owing to extensive human activity, anthropogenic inputs from various sources are typically the main variables influencing the water quality of the majority of rivers, lakes, estuaries, and seas, particularly those that are next to densely populated areas(Jeyaraj et al., 2016). Living things, including plants, plankton, animals, and bacteria, are known as bioindicators, and they are used to monitor the state of the environment's natural ecosystem. They are known across the world as aquatic pollution indicator species. Every organic entity in a biological system gives information about the state of its surroundings. For example, plankton responds quickly to changes in the environment and is a valuable biomarker for determining the quality of water as well as a sign of pollution. Plankton is the best indicator of the health of aquatic flora and serves as an early warning system(Wadjikar et al., 2017). An ecosystem that is in balance is one in which beneficial interactions occur between the environment and living organisms. Since water quality is essential to maintaining an environment in balance, it is evident that it plays a crucial role in this relationship(Jeyaraj et al., 2016).

Rendering is the process of transforming deceased animals or condemned meat into valuable products, such as carcass meal. Traditionally, rendering specifically referred to the extraction of fat from animal materials through heating. However, the term has evolved to encompass the production of carcass meal, meat meal, and technical fat. While the traditional method of rendering involved boiling animal remnants to extract fat, contemporary rendering includes the heating or steaming of carcasses to produce a nearly sterilized material that retains nutrients. The animal by-products utilized in rendering consist of excess fat, hooves, and offal. In the past, tallow was employed in the manufacture of soap and candles, while other by-products like heads and hooves were repurposed for fertilizers. Meat packers quickly recognized the potential for profit in processing these by-products. Today, the rendering industry generates a variety of valuable products, including both edible and inedible oils, chemicals, meat meals, and bone meals, derived from materials such as viscera, bones, trimmings, dead stock, and feathers. A substantial portion of these by-products is recycled into useful products. In developed nations, as well as in India, integrated abattoirs and meat processing facilities manage such waste utilizing advanced equipment and sophisticated processes. Pre-rendering operations: It is essential to process raw materials from the slaughter floor swiftly and comprehensively to guarantee the highest quality of the final product. Prior to placing these materials into the cooker, they require adequate preparation. Heads, feet, condemned carcasses, and bones from the boning department are initially reduced or crushed into smaller fragments using shredders. Additionally, bones can be further reduced in size with machines referred to as “pre-breakers.” Intestines and other soft tissues, which may be
contaminated with feed or manure, must be opened, cleaned, and reduced in size before being incorporated into the cookers during the inedible rendering process.

Introduction
Teratology is the branch of veterinary embryology that studies congenital malformations, often referred to as birth defects, which arise during embryonic or fetal development. Understanding teratology is crucial for veterinarians and researchers because these defects can lead to substantial animal morbidity, mortality, and economic losses in the agricultural and livestock industries. In addition, teratological research can offer insights into human congenital disorders, given the similarities between mammalian developmental processes.
Definition and Scope of Teratology
The term “teratology” derives from the Greek word teras, meaning “monster” or “marvel,” reflecting the historical observation of grossly abnormal fetuses or neonates. Teratology focuses on the etiology (causes), pathogenesis (development), and morphological consequences of developmental disorders. These abnormalities can manifest as structural, functional, or biochemical anomalies, and they can affect a wide range of systems, including the cardiovascular, skeletal, nervous, and reproductive systems. In veterinary medicine, the study of teratogens—agents that cause developmental malformations—is critical. Teratogens include drugs, environmental chemicals, infections, radiation, and nutritional deficiencies, among others. These agents can disrupt normal embryonic or fetal development, leading to a variety of abnormalities.
Causes of Teratogenesis
Teratogenic agents can be broadly classified into several categories:
1. Genetic Factors
Genetic mutations, chromosomal abnormalities, and hereditary disorders can predispose animals to developmental defects. Genetic teratogenesis can occur due to spontaneous mutations in the DNA sequence or inheritance of defective genes from one or both parents. Chromosomal anomalies, such as duplications, deletions, or translocations of

Advancements on sugar processing

India has popped out as one of the largest sugar processing country throughout the world. Through the collaboration of research and development carried out in the field of sugar processing, this industry has witnessed the vast changes in term of technology. Important considerations such as productivity improvement and cost reduction were the main objectives in the field of sugar processing. Sulphur dioxide was earlier used but afterwards lime treatment in clarified juice helped in the processing of white sugar from sugar cane. Since then the continuous progress and improvement has been made and advanced techniques are introduced for manufacturing of sugar with modern tools.

Ramjeawon (2004) reported that farmers and agriculture workers grow sugar cane and beet root for sugar production,providing about 20 kg per capita and that is equivalent to almost 13 percent energy requirement. Fechter et al. (2001) reported that production of the white sugar was focused more on juices rather than molasses which were taken as the raw material. Various processes such as ultra-filtration, de-mineralization and de-colorization were used for the production of white sugar. The traditional refining process wascheaper, and effective in terms of purification and juice purification was the method used for the processing of white sugar directly from the sugar cane. Crystallization was one of the process which is used for increasing the recovery of sucrose and it reduces the molasses production. Chromatography was used in the sugar industry for the separation of sucrose. Another method was ion exchange demineralization which was used in the sugar industry for the removal of minerals from the liquid sugar. Later adsorption has been incorporated to be used de-odorization and de-pigmentation. Membrane filtration is latest technique used in the process which was used for maintaining the quality of white sugar by removing unwanted particle from the juice. Velásquez et al.,(2018) reported that thermal processes are also used for the production of sugar from sugar cane. Non centrifugal cane sugar processing is used for this purpose and the product is obtained by evaporating the sugarcane which has the unique flavor and aroma. Later the product is used as the sweetener and has a traditional characteristics flavor and optimum nutrition.

Introduction

Probiotics, prebiotics and synbiotics are interrelated terms. Probiotic is discussed in detail in previous chapter. In this chapter, prebiotics and its effect on gut along with probiotics are emphasized. Prebiotics can be defined as non digestible food ingredients that stimulate the growth and/or activity of bacteria in the digestive system in ways claimed to be beneficial to health. They were f irst identified and named by Marcel Roberfroid in 1995. He defined prebiotic as a selectively fermented ingredient that allows specific changes, both in the composition and/or activity in the gastrointestinal microflora that confers benefits upon host well-being and health. Further, FAO defined prebiotic as “a non-viable food component that confers a health benefit on the host associated with modulation of the microbiota.”Whereas the term synbiotics refers to a product that contains both probiotics and prebiotics in the form of synergism. A synbiotic has been defined as “a mixture of prebiotics and probiotics that beneficially affect the host by improving the survival and implantation of live microbial dietary supplements in the gastrointestinal tract, by selectively stimulating the growth and activating the metabolism of one or a limited number of health promoting bacteria, and thus improving host welfare”. As described above, the combined use of prebiotics and probiotics is often described as synbiotic, but the United Nations Food & Agriculture Organization (FAO) recommends that the term “synbiotic” be used only if the net health benefit is synergistic.

11.1 Total DNA Extraction by cTAB Method
    
11.2 Extraction, Purification Estimation of DNA
    
11.3 Potassium Acetate Procedure
    
11.4 DNA  Estimation
    
11.5 Restriction Enzymes

Introduction

It is common that after a rocket start, entrepreneur’s lack the motivation to scale up business and eventually fails to succeed in the market. There are many factors that may lead to such failures or even success stories, the most important being the entrepreneurial skills and traits that enable business to sustain in the competitive world.

What makes an entrepreneur competent in running a business? According to Fisher and Koch (2008), ‘Entrepreneurs are born; the advantage that they derive by birth being the natural advantage. However, we have changed our mindset now-a-days, that it is possible to nurture (make) an entrepreneur; the connotation points out that, right kind of education and training can inspire people with capacities to become motivated to be an entrepreneur.

In this chapter, our focus will be on identifying the entrepreneurial capacities in oneself, after reviewing the essential characteristics and traits that an entrepreneur should possess. Also we try to put forward a framework for entrepreneurship, fitting into the canvas of a food based entrepreneur.

Landscaping combines elements of art and science to create a functional, aesthetically pleasing extension of indoor living to the outdoors. One initial purpose of landscape design is to blend mans’ technology (house or building) into the natural surroundings. To work towards a desirable landscape design, the landscape horticulturist must have a working knowledge of art elements and design principles.

The “art” is always changing as the plants grow, environmental conditions change and people use the space. For this reason, landscape designers use a design process that systematically considers all aspects of the land, the environment, the growing plants, and needs of user to ensure a visually pleasing, functional, and ecologically healthy design. The design process begins by determining the needs and desires of the user and the conditions of the site. With this information, the designer then organizes the plants and hardscape materials, which are collectively referred to as the features. The features can be physically described by the visual qualities of line, form, color, texture and visual weight—the elements of design. The principles are the fundamental concepts of composition—proportion, order, repetition and unity—that serve as guidelines to arrange or organize the features to create an aesthetically pleasing or beautiful landscape. Knowledge of the elements and principles of design are essential to designing a landscape and working through the design process.

ABSTRACT

Tree component of agroforestry systems produce large biomass of varying nutrient concentration to serve as alternative to inorganic fertilizers under integrated nutrient management or organic farming. Additionally, agroforestry systems proved effective in conserving soil and rainfall and brought down soil loss up to 0.2 t ha^-1 and runoff up to 1.8 per cent of rainfall. Introduction of grasses in aonla conserved up to 31 cm of rainwater, 28 q ha^-1 of soil, 11 kg ha^-1 of N and 2 kg ha^-1 of K₂O. Conservation coupled with ameliorative capacity of agroforestry systems helped in building organic carbon and nutrients and improving soil physical, chemical and biological properties.

Introduction

Access to adequate food, which is one of the fore-most basic needs of life, should be birthright of every single human being on this earth but in our country one fourth population is still underfed. The food insecurity situation is more rampant in the North-eastern region of the country. The proportion of population below poverty line (BPL) was reported at 31.4 per cent in Arunachal Pradesh, 34.0 per cent in Assam, 37.9 per cent in Manipur, 16.10 per cent in Meghalaya, 15.4 per cent in Mizoram, 8.8 per cent in Nagaland and 40.0 per cent in Tripura, in the year 2015 (RBI, 2015). At national lavel it was reported to be 37.20 per cent. By comparing BPL population in NE Region states and national level poverty it was found that several states of this region like Nagaland, Mizoram and Meghalaya were far better as in these states BPL percentage were very less than the national average, whereas in the states like Tripura, Manipur, Assam and Arunachal Pradesh BPL percentages were close to National level (37.20%). It has now been well established fact that the availability of food grains may not be the real problem of food security; it is prevailing poverty that comes in the way of achieving household’s food security. Hence, household food security is a function not only availability of food but also of the purchasing power of household. Any effort to achieve sustainable development demands concerted efforts to reduce poverty, including finding the solutions to hunger and malnutrition. In this study, an attempt has been made to analyze the status of food deprivation among fish farmers of West Tripura district of Tripura and to examine consumption expenditure behavior fish farming families of the study area.

Varietal release and notification comes under the purview of the Seeds Act which aims to provide for regulating the quality of certain notified seeds for sale and for marketing and for the matters connected therewith. Released and notified varieties are offered for seed certification by the seed certification agencies which ensure that the varieties under certification meet certain prescribed field and seed standards failing which they stand to be rejected during the process of seed certification.

The term ‘geo’ is a Greek word, it means the earth, and the term ‘spatial’ means parameter/feature measured, mapped or modeled with reference to distance or space. The geospatial technology refers to the technology that measure, model, analyze, map, or predict the features or phenomena that occur on earth and its surface.

Introduction

Abiotic stresses adversely affect growth, productivity and trigger a series of morphological, physiological, biochemical and molecular changes in plants. Cold stress is a major environmental factor that limits the agricultural productivity of plants in hilly areas. Plants respond and adapt to this stress to survive under stress conditions at the molecular and cellular levels as well as at the physiological and biochemical levels. However, expression of a variety of genes is induced by different stresses in diverse plants.

Acetic acid            
    

Molecular weight    60.05        
    Melting point (^ºC)    17        
    Boiling point (^ºC)    118        
    Flash point (^ºC)    40        
    Auto-ignition point (^ºC)    426        
    Specific gravity at 20^ºC    1.05        
    Molarity of the concentrated acid (M)    17.4    
    1 M solution    57.5 ml concentrated acid per litre