eChapters

4.1 Introduction

The developed or commercially available models can be applied for any water bodies such as fresh water lakes, ponds, rivers, estuaries and marine ecosystems. The predicted results can be compared with proved with field data and existing approved models and applies to the other such ecosystems. In this chapter, we can discuss about modeling of water bodies, water quality model, spatial discretizafion, modeling pollutants and toxicants, concentration modeling, hydrodynamic mixing zone analysis.

4.2 Modeling of Water bodies

The need for predictive water quality modeling has arisen largely as a result of increased eutrophication of lakes throughout the world (Forsberg, 1987; Canfield and Hoyer, 1988). The most common modelling approach is exemplified by the development and application of steady state, input-output models. Generally, nutrient concentrations are calculated from net inputs and chlorophyll a concentration is predicted by correlation with the limiting nutrient, most often phosphorus (Dillon and Rigler, 1975; Canfield and Bachmann, 1981; OECD, 1982).

Factors that can also influence phytoplankton biomass, such as light, climate, biological interactions and internal loading of nutrients, are not considered. Further more, the assumption that a lake is a continuously mixed system is very restrictive and only applicable at discrete times of the year. As a result, the shortcomings of such approaches include an inability to make predictions in the face of varying physical and biological conditions, and a failure to offer insights into the determinants of changing water quality.

7.1 Introduction

The coast is one of the most important boundaries in the world. It separates the marine part of the world from the continents. It separates the salt-water communities from fresh water communities; it separates land life from water borne life but amphibians living both environments (Fig. 7.1).

Some of the marine organisms move towards estuary for reproduction with less water salinity. The coastline as such is not a stable. It fluctuates in place over considerable distances due to erosion and sedimentation, but also due to the relative change of sea level with respect to land. The coastal zone is thus a very mobile part of the earth from a geographical point of view. Due to its specific geophysical properties, the coast is also a very important area for the development of flora and fauna. There is hardly any other part of the world that houses such a variety of species, both in flora and fauna.

The abundance of opportunities along the coast has also attracted a lot of human activities. The coastal zone has become an indispensable resource for mankind. It provides excellent opportunities for fisheries, housing, recreation, transport, defense purpose, industrial activities and many others. The influx of man with their social and economic activities, their needs for safe housing, food, drinking water, and with the tremendous quantities of waste they are producing poses at the same time a serious threat to the unique features of the coastal zone. It is therefore necessary to study this valuable region so as to prevent that competing activities are gradually causing depletion of the resources in the coastline. The following figures (Fig. 7.1and 7.2) show the typical coastal area of rocky coast and sandy coast.

8.1 Introduction

A lake is a body of water or other liquid of considerable size surrounded entirely by land (Fig. 8.1). A vast majority of lakes on Earth are fresh water, and most lie in the Northern Hemisphere at higher latitudes. In ecology, the environment of a lake is referred to as lacustrine.

Fig 8.1 A Typical Lakes

Large lakes are occasionally referred to as “inland seas” and small seas are occasionally referred to as lakes. Smaller lakes tend to put the word “lake” after the name, as in Green Lake, while larger lakes often invert the word order, as in Lake Ontario, at least in North America. The term lake is also used to describe a feature such as Lake Dal, which is a wet basin most of the time but may become filled under seasonal conditions of heavy rainfall and snowfall. Many lakes are artificial and are constructed for hydro electric power supply, recreational purposes, industrial use, agricultural use, or domestic water supply.

10.1 Introduction

Biochemical Oxygen Demand (BOD) is a chemical procedure for determining how fast biological organisms use up oxygen in a body of water. It is usually performed over a 5 day period at 20 C. It is used in water quality management and assessment, ecology and environmental science. BOD is not an accurate quantitative test, although it could be considered as an indication of the quality of a water source.

10.2 Typical BOD values

Most pristine rivers will have a 5-day BOD of less than 1 mg/l. Moderately polluted rivers may have a BOD value in the range of 2 to 8 mg/l. Municipal sewage that is efficiently treated by a three stage process would have a value of about 20 mg/l. Untreated sewage varies, but averages around 600 mg/l in India and as low as 200 mg/l in the U.S., or where there is severe groundwater or surface water infiltration. Slurry from dairy farms is around 8000 mg/l and silage liquor around 60000 mg/l.

5.1 Introduction

The water quality modeling methodologies are started from conceptual models such as defining the problem in a particular region of interest like fresh water ecosystem, coastal ecosystems, ocean ecosystems, the following methodology can be studied carefully for water quality modeling.

Identification of problems in the region of interest

Monitoring of field data using standard methods like APHA, USGS, BIS etc.

Evaluation of primary data for the toxins, higher amount of concentration from the ambient conditions

Processing of primary data to secondary data

Based on the primary data and secondary data, suitable modeling software can be used. If the temperature of the region is higher than the ambient, it should be used Qual2E, MIKE21 etc.

Modeling results can be compared with field data for calibration and validation.

9.1. Introduction

Oceans (from Okeanos in Greek) are saline waters that cover almost three quarters (71%) of the surface of the Earth. The area of the oceans is 361 million sq. km., and nearly half of the world’s marine waters are over 3,000 meters deep.

Though somewhat arbitrarily divided into several “separate” oceans, these oceans are in fact one global, interconnected body of salt water, often called the World Ocean. The major divisions are defined in part by the continents and a variety of archipelagos, and are labeled the Pacific Ocean, the Atlantic Ocean, the Indian Ocean, the Southern Ocean, and the Arctic Ocean. Smaller regions of the oceans are called seas, gulfs and straits.

There are a some smaller bodies of salt water that are not interconnected with the World Ocean. These are not considered to be oceans or parts of oceans, though some of them have been given the name, sea.

Geologically, an ocean is an area of oceanic crust covered by water. Oceanic crust is the thin layer of solidified volcanic basalt that covers the Earth’s mantle where there are no continents. From this point of view, there are three “oceans” today: the World Ocean, and the Black and Caspian Seas that were formed by the collision of Cimmeria with Laurasia. The Mediterranean Sea is very nearly its own “ocean”, being connected to the World Ocean through the Strait of Gibraltar, and indeed several times over the last few million years movement of the African Continent has closed the strait off entirely, making the Mediterranean a fourth “ocean”.

3.1 Introduction

By the end of the twentieth century one of our most important scientific accomplishments has been the explicit realization that the human population is changing the earth system. Some of these changes are occurring at a remarkable rate. We know, with certainty, that human activities are changing land use, habitats, the chemistry of the Earth’s atmosphere and water, rates and balance of biogeochemical processes, and diversity of life on the planet (Vitousek et al. 1997). One prominent mode of human disturbance has resulted from activities that mobilize the nutrient elements nitrogen and phosphorus through land clearing, production and applications of fertilizer, discharge of human waste, animal production, and combustion of fossil fuels (Nixon 1995).

As a result of these activities, surface waters and ground waters throughout the world now have elevated concentrations of N and P compared to concentrations even in the middle of the 20th century. Our mobilization of N and P has accelerated the fluxes of these elements to coastal waters, and fertilization of coastal ecosystems is now a serious environmental problem because it stimulates plant growth and disrupts the balance between the production and metabolism of organic matter in the coastal zone. Coastal eutrophication is a recently recognized phenomenon (Nixon 1995), and scientific investigation of this human disturbance has progressed for only a few decades, so our conceptual model of the problem is evolving rapidly. Here, I describe 2 phases in the evolution of our conceptual model of how nutrient enrichment disrupts coastal ecosystems, and then finish with a view to the future, suggesting critical questions that must be answered as we work to advance and broaden our understanding of this complex environmental problem. This examination of conceptual models is designed as a complement to the excellent general reviews of coastal eutrophication (Vollenweider 1992, Heip 1995, Nixon 1995, Jørgensen & Richardson 1996, National Research Council 2000).

6.1. Introduction

A river is a large natural waterway. The source of a river may be a lake, a spring, or a collection of small streams, known as headwaters. From their source, all rivers flow downhill, typically terminating in the ocean. The mouth, or lower end, of a river is known as its base level.

A river water is confined to a channel, made up of a stream bed between banks. Most rainfall on land passes through a river on its way to the ocean. Smaller side streams that join a river are tributaries. The scientific term for any flowing natural waterway is a stream; so in technical language, the term river is just a shorthand way to refer to a large stream. Rivers throughout history have been the source and support for civilization, and many major cities today are near a river of some sort (Fig. 6.1).

6.1.1 Topography

A river conducts water by constantly flowing from a higher to a lower elevation, thereby converting the potential energy of the water into kinetic energy. It starts to form loops and snakes through the plain by eroding the river banks. Sometimes the river will cut off a loop, shortening the channel and forming an oxbow lake from the cut off section. Rivers that carry large amounts of sediment may develop conspicuous deltas at their mouths, if conditions permit. Rivers, whose mouths are in saline tidal waters, may form estuaries. River mouths may also be rias.

7.1 Introduction

Energy has become a critical input for the economic development of the India because of the wide spread scarcity of oil and electricity and other commercial form of energy.

The rural areas are often the worst affected because of these shortages and the rural population continues to depend on the inefficient non-commercial energy from like fire wood, cow dung, human and animal for meeting their energy requirement for subsistence, production and devolvement needs.

The rural energy crises or “The energy crisis” has been getting increased attention from the policy makers to tackle the problem in a planned and integrated manner.

The rural energy sector is concerned with two major planning issues.

1. Provision of energy for meeting substance needs for cooking, heating and lighting of the rural areas of the country. This problem is also directly linked to the problem of deforestation and environmental destruction being caused in the rural area because of indiscriminate and wide spread use of non conventional energy sources.
2. Meeting energy requirements for production activities which would create employment and productivity in rural areas.

1. Introduction
Water is the most crucial input for agricultural production. Globally, more than 80% of all freshwater used by humans are consumed in agriculture and most of it are for crop production (Morison et al., 2008). Currently about 60% of production in developing countries is derived from rainfall. Though irrigation provides only 10% of agricultural water use and covers just around 20% of the cropland, it can contribute about 40% of total food production since productivity of irrigated land is almost three times higher than that of rainfed land. The Food and Agriculture Organization (FAO) has predicted a net expansion of irrigated land of about 45 million is hectares in 93 developing countries (for a total of 242 million hectares in 2030). It projected that water withdrawals by the agriculture sector will increase by about 14% during 2000 – 2030 to meet the growing food demands (FAO, 2006). It is estimated that by 2050 in India, about 22 % of the geographic area and 17 % of the population will be under absolute water scarcity. The per capita availability of water which was about 1704 cubic meter in 2010 is projected to be 1235 cubic meter in 2050 (Anonymous, 2011). Infrastructure to increase the command area and minimize the gap of irrigation potential created and utilized is the dominant component of overall investment in agriculture (Anonymous, 2011). Besides this, judicious agricultural water management assists in ensuring good returns through efficient use of fertilizers and high yielding crop varieties. Above all, water will remain as a critical input for attaining sustainability in agricultural production. India’s current water supply is approximately 740 billion m3, which necessitates implementation of judicious water management technologies to enhance crop water productivity. In recent decades the world’s population has shown tremendous growth from an estimated 2.5 billion in the 1950’s to approximately 6.7 billion till date. It is expected that reduction in the average size of land holding, declining per capita water availability, deterioration of water quality etc. will seriously affect the sustainable use of water resources and will make it difficult to accomplish the target of producing 345 Mt of food grain in 2030 and 494 Mt in 2050 AD. To achieve the targeted food production, increase in the crop productivity from the present 2.3 to 4.0 t ha-1 under irrigated conditions and from 1.0 t ha-1 to 1.5 t ha-1 in rainfed area, productivity need to be increased at individual field level. This demands efficient use of water in agriculture, which can be achieved by reducing the losses of water and increasing the water uptake by the crops and it requires quantification of different water budgeting parameters like evapotranspiration and deep percolation.

ABSTRACT

Magnolia campbelii Hook.f. & Thomson is a deciduous tree species belonging to Magnoliaceae and is highly valued for its ornamental uses. The species is threatened by habitat degradation as well as its utility as timber. It is distributed in the eastern Himalaya, southern Myanmar, and Yunnan province of China. However, its exact distribution in the eastern Himalaya is unknown owing to rough terrain and remote location of the Himalayas. We modelled the environmental niche and delineated the potential habitats and distribution areas of the species in this study using ENVIREM dataset and Maxent software. Thermicity Index and Topographic Wetness were the critical environmental variables determining the species distribution in the eastern Himalaya as revealed by Jackknife analysis. Geographical projection of the modelled environmental niche indicates that most suitable areas for its distribution are the western part of Arunachal Pradesh, few pockets in Sikkim, and the central part of Bhutan. The results of the study have implications for in situ conservation of the species as well as identifying suitable areas for reintroduction.

Models Definitions

In social science research a model is a tentative description of what a social process, say the communication process or a system might be like. It is a tool of explanation and analyses, very often in a diagrammatic form, to show how the various elements of a situation being studied relate to each other.

The term model can also refer to a particular process or object, which is used as a point of reference, when an attempt to explain the unknown is being made. It basically comprises involving an analogy to throw up the similarities between the phenomena to be explained and one, which is well known, i.e., the model.

The simplest definition of a model is that it is an analogue. A model is a relatively well-developed analogy. Given two objects or processes which are dissimilar in many respects, one is an analogue of the other to the extent that the physical or logical structure of one re-presents the physical or logical structure of the other.

The advantage of models in communication research is that it allows the researcher to account for different variables in different communication situations. Models only represent systems or processes. Since they are not real, they are just symbolic ways of looking at systems to help us to think about them more lucidly. Again since models do now show every part of a system, they are usually incomplete in that sense. Even those that are shown are represented only in enough detail to help us look at the processes or features in which we are interested. Models give us an idea of complicated objects or events in a general way. They enable us to see how a particular communication event fits into the general pattern. They provide a classification for an old problems, and familiar events. They help us by providing a structure of references for purposes of study. Theories are not models and the most fundamental difference between a theory and a model is that the former is an explanation whereas the latter is a representation.

Introduction

The soil is an invaluable resource that sustains life in innumerable ways. It provides a dynamic foundation for agriculture, supporting growing crops, and serving as a habitat for organisms. It plays a crucial role in maintaining biodiversity. Additionally, soil acts as a filter, purifying and storing water, and it reserves essential plant nutrients. however, soil resources face various threats that endanger their health and productivity. Soil erosion, the removal of the top layer of soil through natural or human-induced processes, poses a significant challenge. It not only leads to a loss of fertile soil but also causes widespread environmental degradation, and reduced agricultural productivity in response to this difficulty, soil conservation emerges as a principal priority. Soil conservation incorporates a range of practices and strategies to prevent soil erosion, and promote sustainable land use. By adopting and implementing effective soil conservation measures, we can safeguard this irreplaceable resource for future peers and ensure food security and environmental sustainability.

The main highlight of the study is to shed light on the causes and consequences of soil erosion, exploring different conservation practices and techniques; also to understand the vital processes and factors contributing to soil erosion, including wind and water erosion. Additionally, to study its impact on soil and crop production and strategies for different conservation practices to mitigate erosion, preserve soil fertility, and ensure the long-term sustainability of our agricultural systems and ecosystems.

Abiotic Stress Tolerance: The ability of plants to withstand and adapt to nonliving environmental stressors, such as drought, salinity, or extreme temperatures. Afforestation and Reforestation: Afforestation involves planting new forests in previously non-forested areas, while reforestation involves restoring degraded or deforested lands with trees to sequester carbon. Agrarian Society: A society characterized by agriculture as the primary means of subsistence and economic activity. Agrarian: Pertaining to the cultivation of land, agriculture, or rural life. Agribusiness: The commercial activities, including production, processing, and distribution, related to agriculture and farming. Agricultural Chemistry: A branch of chemistry that focuses on chemical processes and substances related to agriculture, including soil chemistry, fertilizer composition, and pesticide development. Agricultural Diversification: The strategy of expanding the range of crops, livestock, or other agricultural activities in a rural area to increase income and food security. Agricultural Economics: A branch of economics that focuses on the production, distribution, and consumption of agricultural goods and services, as well as the economic factors and policies that influence agricultural markets. Agricultural Extension: The application of scientific research and new technologies to agricultural practices through education and advisory services. Agricultural Innovation: The process of developing and adopting new ideas, practices, and technologies in agriculture. Agricultural Machinery: Various mechanical devices and equipment designed for use in farming, such as tractors, plows, and harvesters. Agricultural Subsidies: Financial incentives provided by governments to farmers or agricultural producers to support their production, stabilize prices, or achieve other economic or social objectives. Agriculture: The science and practice of cultivating crops, raising livestock, and managing resources for food production and other agricultural products. Agroecology: The scientific discipline that applies ecological principles to the design and management of sustainable agricultural systems, focusing on biodiversity, nutrient cycling, and reduced environmental impact.

Modern and transgenic breeding approaches consist of modern plant breeding triangle, high-throughput phenotyping (HTP), marker-assisted selection (MAS), marker-assisted backcrossing (MABC), genomic selection (GS), genome-wide association study (GWAS), and genome editing. MAS accelerates trait identification through DNA markers, improving efficiency in selecting plants with desired traits. MABC employs molecular markers to facilitate gene introgression from donor parents (DPs) to superior recurrent parents (RPs). GS employs genome-wide markers to predict performance, revolutionizing breeding by considering both major and minor-effect quantitative trait loci (QTLs). Genome editing techniques like CRISPR-Cas9 (clustered regularly interspaced short palindromic repeats associated protein 9) enable targeted gene modifications for desired traits. Genome editing involves selecting target genes, designing guide RNAs for Cas9, and introducing the CRISPR-Cas9 system into plants. This technology has been utilized to enhance crop productivity, sustainability, and disease resistance. Transgenic crops are designed to carry specific traits, such as pest resistance, virus resistance, abiotic stress tolerance, and nutritional enrichment. Agrobacterium tumefaciens is highlighted as a tool for transgene introduction, offering advantages like low copy number integration and stable expression. Genetic engineering remains a promising avenue for creating disease-resistant crops and ensuring global food security.

Survival strategies of some plants help them to thrive in any adverse environmental conditions. We classify them as weeds or ruderals. Such weedy species have developed unique and effective physiological traits to withstand various stresses, and unique mechanisms to regulate growth under adverse environments. Climate change is a harsh reality observed in different parts of the world which brings new challenges in crop production and weed management.

Introduction of biotechnological tools in weed science and management has given new dimensions to weed research.

Soil fertility evaluation is conducted for providing an adequate supply of essential plant nutriens to ensure optimum plant productivity, while maximising economic benefits and minimising environmental degradation.
 
Mathematical modelling of nutrient application

The significance of an essential plant nutrient was contained in the Liebig’s law of minimum.

1. Introduction

Modern medicine relies heavily on biomaterials and tissue engineering, which are a broad category of materials designed to interact with biological systems in a therapeutic or diagnostic capacity. These materials, which are frequently polymers, natural or synthetic, are made to have particular physical, chemical, and biological characteristics in order to satisfy the demands of a range of medical applications (Holzapfel et al., 2013; Ozdil & Aydin, 2014). These materials can be produced, modified and characterized in a number of ways, according to the particular needs of the application, including 3D printing, molding, and machining (Jandyal et al., 2022). Biomaterials are extensively studied for their applications in tissue engineering, which comprises the recent developments into studying the disease models, micro-scale bone repairing, wound healing and other applications (Purnama et al., 2010). Biomaterial degradation and biocompatibility must be taken into account when developing implants or medical devices since the material's characteristics are tunable according the external or internal parameters. In order to produce biomaterials for use in healthcare applications, cooperation between specialists in biology, medicine, and materials science is needed, the upcoming advances in bioprinting, artificial graft and usage of artificial intelligence might give us an insight towards development in disease regression (Holzapfel et al., 2013; Khan et al., 2015).

The majority of the protein found in the food supply worldwide comes from animal or grain sources, which together account for around half of the total. First of all, fish and crustaceans are significant and excellent providers of amino acids, a form of protein that is essential to nutrition and is only present in trace amounts in cereals and grains. It turns out that these matters for global nutrition and that some low-income, food-deficient nations really benefit from it. Furthermore, fisheries are significant local sources of food, commerce, and revenue in many coastal developing and developed countries. This has prompted researchers and biotechnologists to look at the identification, use, and extraction of these biomaterials in healthcare settings (Raghavendra et al., 2015). The varied fish-derived biomaterials have a variety of uses, including as in tissue engineering, medication delivery, and wound healing, which has opened up new avenues for medical science to make scientific discoveries (Bhat & Kumar, 2013).

Introduction

The modern biotechnologies (animal cloning, stem cells, and transgenesis) have contributed immensely to increasing livestock productivity, particularly in developed countries, and could help to alleviate poverty and hunger, reduce the threats of diseases and ensure environmental sustainability in developing countries. A wide range of biotechnologies are available and have already been used in developing countries in the animal science disciplines, i.e., animal reproduction, genetics and breeding; animal nutrition and production; and animal health. In animal reproduction, genetics and breeding, artificial insemination (AI) has perhaps been the most widely applied animal biotechnology, particularly in combination with cryopreservation, allowing significant genetic improvement for productivity as well as the global dissemination of selected male germplasm. Complementary technologies such as monitoring reproductive hormones, oestrus synchronization and semen sexing can improve the efficiency of AI. Embryo transfer provides the same opportunities for females, albeit on a much smaller scale and at a much greater price. Biotechnologies in animal health are used to increase the precision of disease diagnosis as well as for disease control and treatment. The Biotechnology Industry Organization claims that the genetic engineering of animals in agriculture offers ''tremendous benefit to the animal by enhancing health, well-being and animal welfare'' (Gottlieb and Wheeler 2008). Further, improvements are still needed in product composition and production efficiency, especially in growth, disease resistance, and reproduction. In this regard, transgenic animals stem cells, cloning and other emerging biotechnologies will have important roles in producing more and higher quality animal food.

The foundation of modern insect classification was laid by Brauer in 1885. According to Brauer insects were classified as Subclass: Apterygogenea (pterous) and Pterygogenea (winged) based on:

• Presence or absence of wings.

• Mouthparts.

• Metamorphosis.

• Number of Malpighian tubules.

• The nature of wings.

• Thoracic segments etc.

The earliest classification of insects was based on habits and habitats and on certain gross anatomical features that define the general aspects of different kinds. In classifying insects, not only anatomical characters but also facts pertaining to physiology, biology, distribution, ecology and sometime cytology of the species is taken into consideration.