eChapters

13.1 Biopolymer-Based Coatings with Antimicrobial Properties 13.1.1 Understanding Biopolymer-Based Coatings Biopolymer-based coatings are a game-changer in food packaging, offering natural, sustainable solutions for food safety. These coatings, derived from renewable sources, like polysaccharides (e.g., chitosan, starch, cellulose), proteins (casein, gelatin), and lipids (wax, shellac), have proven to be biodegradable and consumer-friendly alternatives to synthetic polymers. 13.1.2 Antimicrobial Properties and How They Work • Antimicrobial coatings are crucial in slowing down spoilage and extending the shelf life of perishable foods. They work by disrupting cell membranes, inhibiting cell processes, and creating oxidative stress in microbes. This is achieved through natural antimicrobials like essential oils (e.g., oregano, thyme, clove), plant extracts, and organic acids; inorganic agents like silver nanoparticles, zinc oxide, and titanium dioxide; and microbial-derived substances like nisin, lysozyme, and bacteriocins (Yu, Z et al ., 2022)

Studies have shown that modified atmosphere packaging (MAP), and controlled atmosphere storage have the ability to delay quality losses and thus extend shelf life of fresh or minimally processed or fresh-cut produce (Church 1994; Gil et al. 1996a, b; Lee et al. 1995). Modified atmosphere packaging of fruits can result in reduction of respiratory activity, delay in softening and ripening and a reduced incidence of various physiological disorders and pathogenic infestations (Artés 1993).

9.1. Introduction

In a fast-paced world, demand for pre-cooked, fresh-like, and convenient products without preservatives is increasing. This demand has triggered the need for better alternative packaging materials for food products like MAP (Modified Atmosphere Packaging), CAP (Controlled Atmosphere Packaging), edible packaging, biodegradable packaging, etc. Packaging plays a crucial role in transport, distribution, storage, retailing, and end-use, a means of ensuring safe delivery to the ultimate consumer in sound conditions at optimum cost. It performs the functions depicted in Fig.1 for both fresh as well as processed products (Opara et al., 2007; Opara, 2009).

Clsssification

Fracture of upper third humerus, shoulder dislocation and scapula has been grouped under highest level fracture. (Fig.1)

Purpose

To know the method of casting the highest level fracture by modified valeau sling application.

Requirement

Thick 8 layer cotton padding, adhesive gum, 6"-8" long bandage rolls.

Indication: Highest level fracture (femur fracture) (Fig. 1)

Treatment: Modified Velpeau Sling application

Requisite

Adhesive gum

Damage Cloth

Abstract

The agricultural scientists particularly those who are in advisory service, irrespective of specialization, are often approached by the farmers with diseased samples of their crops and sought advice on plant protection strategy. The strategy includes components of control measures, doses, mode and time of application. In the present article different steps of formulation of plant disease control strategy are discussed. To further elaborate the contents, examples from integrated management strategy of mango malformation disease is cited.

Keyword: Mango Malformation

Introduction

Mango malformation, disease was first time reported from Darbhanga District of Bihar State in 1891 by G. Watt. The disease is currently prevalent in almost all the mango growing country and is thus designated as the plant disease of International importance and previously considered to be a serious problem in the northern parts of the country, has now started to appear in central India too in severe form. It is well known, the mango malformation is the most serious disease, rendering mango cultivation non-lucrative in subcontinent and other regions of the world (Ahmad et al., 2002; Ploetz, 2001). Mango malformation caused by fungus Fusarium moniliforme var. Subglutinans, are proved (Freeman 1999; Zheng and Ploetz, 2002). Recently, these isolates were described as members of a new species, F. mangiferae Britz, Wingfield and Marasas sp nov. (Britz et al., 2002). The casual organism of mango malformation grows well at lower temperature and higher relative humidity. The disease is quite common in both grafted and the seedling plants (Kumar and Chakrabarti, 1997). The symptoms manifest as bunchy top (BT) in 4-5 month old seedlings in the nursery, vegetative malformation (VM) of twigs arising from axillary buds and malformation of inflorescence (MF). Normally floral malformation is more prevalent in bearing trees than vegetative malformation. Flowers in the malformed panicle are much enlarged and crowded with hypertrophied axes of the panicle. Malformed inflorescences/ panicle of different varieties were variable in respect of their shapes, sizes, growth and compactness, depending upon the cellular structure and physiology under environmental factors (Chakrabarti et al., 1990). Generally malformed inflorescences produce no fruit, or abort already stages (Schloser, 1971) and is directly responsible for reduction in yield (Kumar et al., 1993 and Singh et al., 1998). In the present study the incidence of Floral malformation on a large number of mango cultivars was recorded over a period of 5 years with a view to identify the entries of future resistant breeding programme.

17.1 Modules

• A module is a file containing python definitions and statements.

• A python module is (.py file) containing variables, class definitions, statement and function related to a particular task. The major feature of having module is that its content can be reused in other programs, without having to rewrite or recreate them.

• They are executed only the first time the module name is encounter in an import statement.

Type of modules:

• User defined modules

• Built-in modules

Ex.-array, math, numpy, sys, etc.

8.1. Documented ITKs on Moisture Conservation

The ITKs were documented under following specific categories

• Agronomic Measures
• Tillage
• Bunding & Terracing (Mech. & Vegetative barrier)
• Land Configuration
• Soil Amendment / Mulching
• Erosion Control & Runoff Diversion Structures
• Water Harvesting, Seepage Control & Ground Water Recharge

India is an agricultural country. The geographical area of India is about 328 mha out of which 147 mha of land under cultivation and 84-mha land is under irrigation. The population is increasing at an alarming rate that requires producing more food for the growing population. This problem can be solved either by increasing the land under irrigation or using different soil water conservation techniques. It is well known fact that during rainfall a considerable amount of water goes to sea due to high rate of runoff. It is highly needed to trap as much as water falling in the form of rainfall and recharge the groundwater so that it is made available for irrigation purposes.

Moisture plays by far the most important role in soils as regards vegetation. It is through the medium of water that the plants obtain their quota of mineral food vital for their growth. If water is gradually withheld from the soil, at a certain stage, the plant will begin to wilt and soon dry up. The soil may still contain some moisture but the plant is unable to make use of it. The minimum moisture in the soil below which wilting will take place is called the Wilting Coefficient and at one time great importance was attached to it. The determination of this Coefficient, however, is tedius. One must grow a number of plants and slowly watch them wilt and determine the moisture content at that point. Moisture content of the soil is determined by heating a weighed quantity of the sample in an oven kept at 100-110 ^oC. The moisture is expressed as percentage on the oven-dry soil.

Clouds play very important role on weather and climate. The formation of clouds takes place when water condenses in the sky. Clouds are visible accumulation of tiny water droplets and ice crystals in the Earth’s atmosphere. The moisture is always present in the atmosphere though it may not be visible. Clouds form when air becomes cooler until the water vapour present in it condenses to liquid form. The condensation over oceans occurs around solid particles like salt, dust, smoke etc. suspended in the atmosphere. The type of clouds depends upon temperature and wind. The clouds are classified based on physical appearance and the height at which clouds are formed (Fig. 7.1).

Term moisture stress is generally applied to the stomata opening and transpiration increases with time until they close due to high temperature.

5.1. Causes of moisture stress in plants

Main reason is extent of transpiration which is affected by leaf size and composition, size and distribution of stomata on leaf, atmospheric humidity, temperature, wind velocity and day length.

High atmospheric temperature due to intense sun and increased transpiration causes closure of stomata and wilting of leaves even, if soil moisture content is not limiting.

This deficit is made up during night due to decreased transpiration.

In plants, moisture content decreases either due to increased transpiration or reduction in absorption or both.

Abstract

Anantapur is the driest district of Andhra Pradesh and hence, agriculture conditions are very often precarious. Groundnut grows where other crops fail and thus it is the predominant crop of Anantapur district. Groundnut is grown in about 7.5 lakh ha in Anantapur district; however the average yields are low at 500 kg ha^-1. Among various available vegetation indices, normalised difference vegetation index (NDVI) is widely used for all reasons, which is a single numerical indicator of presence and condition of green vegetation. NDVI mapping at a regional scale helps to assess the spatial changes in the vigour of green vegetation and thus occurrence of any moisture stress. Climate tools have a great role in understanding the crop performance and estimating the yields. This study was taken up by using freely available MODIS data to understand NDVI in terms of abiotic stresses over Anantapur district and linking with the actual rainfall conditions, groundnut crop acreage and production. Results indicate that low groundnut yields in general could be related to NDVI-based stress measurements and rainfall quantum and distribution in the area however, with a few exceptions. It is hoped that by combining improved practices through IWM with climate-adapted crop varieties, rainfed farmers of Anantapur district can sustain their crop production under present climate variability and become resilient to future climate change.

Keywords: Climate, MODIS, NDVI, Anantapur, Groundnut, Integrated Watershed Management

Extraction of DNA from Tissue
(Using HiPurATM Multi-sample DNA Purification Kit)
Kit contents
Re-suspension buffer, Lysis solution, Prewash solution concentrate, Wash solution concentrate, Elution buffer, Proteinase K, HiElute Miniprep Spin Column (Capped), Collection tubes (uncapped), Collection tubes Dilute the prewash, wash solution and Proteinase K according to the kit.
Protocol
Prepare tissue
Weigh 25 mg of tissue, add approximately 3 ml of 0.8 per cent of normal saline. Homogenize the tissue with homogenizer or with mortar and pestle. Transfer the homogenized tissue with saline to a microcentrifuge tube. Centrifuge at 14000 rpm for 10 minutes. Discard the supernatant and use the pelleted tissue for further lysis.
Digest tissue
Add 180 μl of resuspension buffer and 20 μl of Proteinase K solution to the pelleted tissue in microcentrifuge tube. Mix by vortexing. Incubate the sample at 55oC until the tissue is completely digested (2-4 hours) in a shaking water bath. Vortex briefly after complete digestion.

MOLECULAR BREEDING

Molecular breeding is the application of molecular biology tools, often in plant breeding.

Genetic markers

Genetic marker is defined as a gene whose phenotypic expression is usually easily discerned, used to identify an individual or a cell that carries it, or as a probe to mark a nucleus, chromosomes or locus (King and Stansfield, 1990). Three broad classes of genetic markers are morphological markers, biochemical markers and DNA or molecular markers.
 
(1) Morphological markers

Morphological markers are based on the visually assessable traits viz., morphological and agronomic traits. However, they are limited in number.

MOLECULAR BREEDING

Molecular breeding is the application of molecular biology tools, often in plant breeding.

Genetic markers

Genetic marker is defined as a gene whose phenotypic expression is usually easily discerned, used to identify an individual or a cell that carries it, or as a probe to mark a nucleus, chromosomes or locus (King and Stansfield, 1990). Three broad classes of genetic markers are morphological markers, biochemical markers and DNA or molecular markers.

(1) Morphological markers

Morphological markers are based on the visually assessable traits viz., morphological and agronomic traits. However, they are limited in number.

Features of morphological markers

i.They are easy to identify, there is no need of any complex analysis. Trait of interest can be identified visually.

ii.Morphological markers are inherited qualitatively or quantitatively.

iii.Frequency of availability of morphological markers is less in number i.e., morphological markers may not be available for all the traits of interest.

iv.They are influenced by environment.

v.Since they are influenced by environment, they are unstable in inheritance.

vi.They are stage specific i.e., a particular marker will be useful to identify in a particular stage of plant and not any stage of the plant.

vii.They are influenced by genotype and developmental stages of the plant.

Besides drawbacks, the morphological markers are useful to the plant breeders for the selection purpose in certain situation.

Introduction
The most extensive diversity is found in the realms of plants and insects, encompassing over 1 million arthropod taxa, primarily comprising insects, which have been comprehensively described, along with more than 350,000 plant taxa. Notably, a substantial portion of the described insect species serve as either pollinators or herbivores. Over millions of years, insects and plants have coevolved, constantly adjusting and adapting to each other’s characteristics. Plants have developed numerous morphological and biochemical features to withstand damage from insects, while in response, insects have evolved a range of defensive and adaptive mechanisms. These mechanisms include behavioural, morphological, physiological, biochemical, and genetic traits, enabling them to either tolerate or adapt to the defensive traits of plants (Schmelz et al., 2006; Wu et al., 2007; Howe & Jander, 2008; War et al., 2018). Plant defenses against insect pests can be broadly categorized into two main types: antibiosis and antixenosis resistance. Antibiosis involves the direct impact of plant defensive traits on insect growth, development, and survival. In contrast, antixenosis defense relies on morphological or chemical factors that alter insect behaviour, deterring them from feeding and laying eggs on the plant. The trichomes, spines, cuticles, thorns, and lignified cell walls, are the morphological traits of defense that directly protect plants from insect pests. The biochemical defense mechanisms are typically activated in response to insect attacks and are characterized by their dynamic nature (War et al., 2018). Plant volatiles serve a significant function in the indirect defense of plants against insect herbivores. They accomplish this by either deterring the insect pests or by luring the pests’ natural adversaries. Among the various attributes associated with plant defense, chemical barriers, whether they are induced by stress or present constitutively, along with the nutritional composition of the plant, are regarded as particularly crucial for impeding insect growth and development (Peters & Constabel, 2002; War et al., 2019).
Chemical resistance entails the production of secondary metabolites, whether inherently present (constitutive) or induced as a response to a threat, to fortify the plant’s defense mechanisms (Figure 1). Constitutive defense metabolites, initially stored in an inactive state, referred to as phytoanticipins, become activated when herbivores attack. This activation is facilitated by the enzyme ß-glucosidase, which subsequently triggers the release of various aglycone metabolites possessing biocidal properties (Morant et al., 2008). Metabolites that are induced in response to herbivore activity are referred to as phytoalexins. These compounds encompass a variety of substances such as isoflavonoids, terpenoids, alkaloids, and more. They are recognized for their capacity to influence the growth and viability of herbivorous organisms (Walling, 2000). Furthermore, a notable role in imparting host-plant

Introduction

Livestock contribute directly to the livelihoods of nearly one billion of the world’s population. Livestock provide protein and minerals for human consumption, manure for crop production, and fibre and leather for industrial uses. Animals are also a source of draught power. Beyond their role of providing food and inputs for agriculture and industry, livestock provide security to farmers in developing countries, especially in emergencies such as crop failure. To many of the resource-poor, both smallholder farmers and landless livestock keepers, animals are a living bank, facilitating both income distribution and savings. In addition, by consuming crop residues and by-products, in addition to well-managed grazing, livestock production contributes positively to the environment, particularly in mixed crop-livestock production systems. Thus, livestock are an important source of income and employment that contribute to poverty alleviation and enhance the household food security of farmers.

INTRODUCTION

Molecular tools generally refer to molecular genetic tools. Although the first use of these tools began more than four decades ago, whenLewontin & Hubby (1966) used allozymes to find out the amount of genetic variation present in wild populations of Drosophila, the lack of expertise and high cost of these tools have prevented their widespread use among ecologists in general and behavioural ecologists in particular. But recently the accessibility and costs of these techniques have come down a lot and with the right kind of collaboration, lack of expertise is no longer an issue.

As was mentioned above, the Lewontin & Hubby’s (1966) investigation was done using allozymes. Although still an option, user-friendly neutral nucleotide markers are more preferred by investigators nowadays. The discovery of the polymerase chain reaction (PCR) in 1983 by Kary Mullis was the single landmark in this field, if one has to mention one. The use of molecular markers has totally revolutionized the field of ecology. It has provided ecologists the tool to ask questions, which were hitherto impossible to tackle and also to answer questions with much more precision and accuracy than was possible till now. It has toppled long held beliefs, sometimes, romantic ones, by ecologists.

Introduction
Infectious diseases in aquaculture are becoming increasingly important to address to support the growth and sustainability of the industry. This is especially true as many view farmed seafood production as a key solution for feeding the world’s growing population and reducing poverty in numerous countries (FAO, 2016). It is essential to establish biosecurity programs that effectively prevent, manage, and eliminate diseases within aquaculture operations. Biosecurity plays a critical role in safeguarding agriculture and aquaculture operations from the devastating effects of disease outbreaks. These programs are critical to safeguarding the health of aquatic species, protecting ecosystems, and ensuring the sustainability of the industry. At first, implementing biosecurity measures in aquaculture may seem like a simple concept. The well-known saying “prevention is better than cure” is especially relevant to aquaculture diseases, given the significant economic consequences of disease outbreaks. Effective biosecurity practices can help prevent these costly issues from arising. Biosecurity is a comprehensive and coordinated strategy that includes policies and regulations designed to assess and manage risks across various sectors, such as food safety, animal health, and plant health, while also addressing related environmental risks. Biosecurity measures focus on preventive practices such as quarantine, hygiene protocols, and environmental management.