eChapters

Botany

Ashwagandha (Withania somnifera), also known as Indian ginseng belonging to the family Solanaceae, is an important ancient plant, the roots of which have been employed in Indian traditional systems of medicine, Ayurveda and Unani to cure asthma, fever, chest complaints. It is an erect branching undershrub reaching about 1.50 m in height. It grows in dry and sub-tropical regions. Being hardy and drought tolerant species with its enormous biocompounds, its usage is forever regarded and continuous to enjoy the monopoly in many parts of India, particularly in Madhya Pradesh. It grows in dry parts in sub-tropical regions. Rajasthan, Punjab, Haryana, Uttar Pradesh, Gujarat, Maharashtra and Madhya Pradesh are the major Ashwagandha producing states of the country. Roots are fleshy, tapering, whitish brown. Leaves are ovate and flowers are greenish. The mature fruits are orange-red berries.

Varieties:Poshita and Rakshita are high yielding varieties released by CSIRCIMAP, Lucknow. Jawahar 20 is cultivated in Madhya Pradesh. WSR is another variety released by CSIR-Regional Research Laboratory, Jammu. Nagori is a local variety with starchy roots

Varieties: No named variety

Soil: Red sandy soil and sandy loam soil are highly suitable. Soil drainage is essential and hard pan and water logged soils should be avoided.

Climate: Suitable for plain and lower hills. Requires 70 cm annual rain fall

Propagation: Terminal three to four nodal cuttings measuring 10 cm length is used

Land Preparation: Apply 15 t FYM/ha. Ridges are formed at a spacing of 60 cm. Cuttings have to be planted at a spacing of 45 cm.

Nutrient management: Nutrients Quantity (kg / ha) N 30 P 60 K 50 The above nutrients can be applied in two split doses viz., 30 and 45 days after planting. In micronutrient deficient soils, ZnSO4 can be applied as basal fertilizer.

Pre sowing seed treatment: Fortification with GA3 100 ppm (or) moringa leaf extract 2% for 16 h (or)KH₂PO4 2% for 16 hours

Age of the seedling for transplanting: The seeds are first sown in primary nursery (pot) and after 16 day the seedlings are transplanted to raised nursery and after 24 days transplanted to main field.

Botany :Annual Chrysanthemum is a winter annual that can be grown either as pot plants or in groups as bed plants for various ornamental purposes. There are two types of annual Chyrsanthemums: Chrysanthemum Segetum and C.coronarium. Major varieties of Chrysanthemum segetum L. are Morning Star, Evening Star, Eastern Star, Blanca, Eldorado, Gloria, Isabel, Romeo, and yellow Stone while popular cultivars of C. coronarium L. include Nivea, Oreon, Albo, Golden Crown, Luteum, Tom Thumb Golden Gem, Tom Thumb-Primrose Gem and Tetra Comet. In addition to this, there is another type of annual Chrysanthemum, i.e. C. carinatum. Popular varieties of C. carinatum S. are Merry, Atrococcineum, Burridgeanum, Eclipse, Flammenspiel, John Bright and Northern Star.

Propagation

Annual Chrysanthemums can be propagated by seeds. Their sowing time depends upon climate. It varies in different parts of India. In the Northern plains, winter season annual Chrysanthemums are sown during September–October. The seeds are sown in nursery beds, earthen pots, seed pans or wooden seed trays. The seed compost should consist of one part each of garden soil, coarse sand, farmyard manure and leaf-mould. For preparing the nursery beds, the soil should be dug up thoroughly and sufficient farmyard manure, should be mixed in soil. Raised nursery beds of convenient size (normally 60cm wide and 15cm high) should be prepared. If soil is heavy, some quantity of sand may be added. It is better if the soil of nursery bed or earthen pots is sterilized with 2% formalin. For this, soil is drenched with formalin solution and is covered with polythene sheet for 45hr. Afterwards, the polythene is removed and soil is dried before sowing the seeds.

In India marigold is one of the most commonly grown flowers and used extensively on religious and social functions in different forms. Because of their ease in cultivation, wide adaptability to varying soil and climatic conditions, long duration of flowering and attractively coloured flowers of excellent keeping quality, the marigolds have become one of the most popular flowers in our country. Flowers are sold in the market as loose or as garlands. Due to its variable height and colour marigold is especially use for decoration and included in landscape plans.

Potato has special seed production problems as the quality characteristics of seed potatoes are influenced by a number of factors and important amongst them are the diseases and pests namely, viruses, fungi, bacteria and nematodes. Once the seed tuber is infected the pathogens, specially viruses, permeate through the plant system. The plant growth, therefore declines and the yield reduces progressively. It is therefore, important that seed stocks should not only be genetically pure but also should be in right physiological condition and disease free at the time of planting. Seed production technology developed for seed potato production, thus aims at producing disease free, genetically pure seed. There are now two independent channels of seed production for hills and plains.

Hill seed : The seed produced in hills (2500 metres above sea level) at suitable locations is called ‘Hill Seed’.

Plain seed : The seed produced in plains at suitable locations is called ‘plain seed’. Northern plains have emerged as an important source of potato seed production. The low aphid, plains seed is in right physiological condition at the planting time and yields higher than the traditional hill grown seed.

Once healthy seed potatoes are introduced into the system of growing them during low Aphid period accompanied by a systematic insecticide application, roguing and removal of haulms before the aphids attain critical number and the re growth is checked, the health standards for the seed crop could be maintained for a number of generations. This system of seed potato production has been designated as ‘Seed Plot Technique’.

Botany: French bean has tap root system with poor nodule formation. Leaves are trifoliate. Though a self-pollinated crop, French bean offers wide variability for plant growth (bushy / climbing), colour of pod (green / waxy coloured), cross section of pod (flat / oval / round), pliability (stringed / string less) etc.

Varieties

1. Arkakomal: Plant is bushy. 70 days for flowering.
2. Blue pod medium: It is a white seed variety. It has bluish black spots on pods.
3. Bountiful: Introduction from US comes up in September to February. Seeds are Brown sweetish. It is resistant to common disease.
4. Contender: Tolerant to powdery mildew and mosaic.
5. Pant anupama: Developed from pantnagar. Bushytype
6. Pusaparvathi: Developed by X ray radiation of American variety IARI

Botany : Pea is a self pollinated crop. Time of anthesis is 5.45 to 6.30 AM. Time of dehiscence is 5.45 to 7.30 AM. Duration of pollen futility is on the day of anthesis to 24 hr there after. Duration of stigma receptivity is 48 hr before and 24 hr after anthesis.

Method of seed production : Var: Open pollination ; Hybrids: Emasculation and Pollination

Varieties / Hybrids

Early varieties : Arlcel, Matar Ageta 8, Early Badger, Pant Uphar, Hisar Harit, P.M. 2, Jawahar Matar 4, Meteor, Alaska, Lucknow Boniya, Pant Sabzi Matar 3, Pant Matar 2, VL Ageti Matar 7, Asauj.

Mid season varieties: Bonneville, Lincoln, VL 3, Shalimar Matar, Solan Nirog, Jawahar Matar 1, Pant Uphar, p88, Khapar Kheda, JP. 83, JP71, NP. 289, T19

Late varieties: Kinnauri

Origin

Beet root originated from Beta vulgaris L. ssp. maritima by hybridization with B. patula. Crop has site of origin probably in Europe. Earlier types were with long roots like that of carrot. Beet root, sugar beet and palak belong to species B. vulgaris and are cross compatible.

Botany

Beet root is a biennial, producing a fleshy elongated hypocotyls and a rosette of leaves in first year and flowers in second year. Upper portion of fleshy root develops from hypocotyls and basal part from tap root. Concentric rings seen in cross section of root are as a result of alternate formation of vascular tissues and storage parenchyma tissues. Root skin colour varies from orange red to dark purple red. Colour of beet root is due to presence of red violet pigments of â cyanins and a yellow pigment, â xanthin. It has extensive tap root system and tap root grows as deep as 3m. Rosette leaves develop in a close sp

Carrot (Daucus carota Stova condolle) is one of the most important and widely used root vegetable belonging to the family Umbelliferae. The seed production can be done during September – October in plains and in hills the sowing takes place in June and roots are replanted during the first week of October.

Method of seed production

Carrot is a cross-pollinated crop and self-pollination occurs to the extent of 0-5%. Crosspollination is mainly through insects. Seeds should be allowed to set by cross-pollination in isolation. Seed production is done by seed to seed and root to seed method. In seed to seed method, the matured roots are left to produce flowers and seeds in the place where seeds are sown initially. In root to seed method, roots at edible maturity should be uprooted and the roots of true to varietal characteristics should be selected and transplanted to the well prepared field after proper trimming of roots and shoots. This root to seed method is preferred for seed production in carrot since the root rot infection is high in seed to seed method of seed production.

The isolation distance maintained between the fields of other varieties and the fields of the same variety not conforming to varietal purity requirements for certification is 1000 metres for foundation and 800 metres for certified seed production. During mother root production an isolation of 5 metres should be followed.

Botany

Cauliflower is highly cross pollinated crop due to self incompatibility. Flower is protogynous in nature. Stigma remains receptive 5 days before and 4 days after opening of the flower. The time taken from pollination to fertilization is 248 hours depending upon the temperature. The optimum temperature for fertilization and seed development is 12°C – 18°C. Bees are the major pollinators.

Method of seed production: There are two methods of seed production

1. in situ method (seed to seed method)
2. Transplanting method (Head to seed method)

For seed production, seed to seed method is recommended since the head to seed method in India has not been very successful. In seed to seed method (In situ method) the crop is allowed to over winter and produce seed in the original position, where they are first planted in the seedling stage.

Elephant foot yam is an underground stem tuber belonging to the family Araceae, one of the most popular tuber crops, extensively used as a favourite vegetable by millions of people in India. It has both nutritional and medicinal value and is usually consumed as cooked vegetable. It has high dry matter production capability per unit area than most of the other vegetables. Elephant foot yam is a remunerative and profitable stem tuber crop. The crop is gaining popularity due to its shade tolerance, easiness in cultivation, high productivity, less incidence of pests and diseases, steady demand and reasonably good price.

The analytical work in a soil-testing laboratory mainly involves standard chemical methods, suitably modified to permit handling of a large number of soil samples with the required degree of accuracy and speed. Many of the analytical operations are carried out more conveniently with help of common as well as sophisticated instruments.

The various instrumental measurements followed in soil and water-testing work in the laboratory can be broadly divided into two groups:

1) Determination of pH and electrical conductivity

2) Colorimetric, spectrophotometric

To set up a soil-testing laboratory the minimum requirements are as follows:

8.1 Laboratory floor area

Minimum four rooms are needed. They are as follows:

1. Office room, floor size: 18’x 12’

This room is used for registration of the soil samples received, recording recommendations along with soil test results in laboratory book and in report sheet, their dispatch, accounts etc.

Soil testing kit is developed to determine the available nutrient status of soil by rapid test methods. With this system of soil testing, a farmer can test his own soil as often and, in as many places as he feels necessary, and after gauging the need of his soil, he can apply the fertilizers as required. The present mode of soil testing in laboratories usually takes few days and sometime weeks and the farmers may have to travel long distances to submit the soil sample.

India is recovering from the euphoria of the Green Revolution and battling the residual effects of the extensively used chemical fertilizers and pesticides in the country’s soils. The decade from 1980 to 1990 alone saw the area under pesticides in India, increased a whopping 20-fold, from six million hectares to 125 million hectares. After a high annual consumption of nearly 75000 MT reached in the early ’90s, interventions in the form of Integrated Pest Management (IPM) practices have only now started to show a declining trend in the use of pesticides in India. Interestingly, India’s consumption of pesticides per hectare is low (0.288 kg/ha) when compared with world averages—0.5 kg/ha against Korea’s 6.60 kg/ha and Japan’s 12.0 kg/ha. According to the pesticides industry statistics, India spends US $3/ha on pesticides compared with US $24/ha spent by Philippines, US $255/ha spent by South Korea and US $633/ha by Japan. Yet, despite a comparatively low use of pesticides in India, the contamination of food products in the country is alarming. About 20 per cent of Indian food products contain pesticide residues above tolerance level compared to only 2 per cent globally. No detectable residues are found in only 49 per cent Indian food products compared to 80 per cent globally. A pesticide is any substance or mixture of substances intended for preventing, destroying, repelling or mitigating any pest. Though often misunderstood to refer only to insecticides, the term pesticide also applies to herbicides, fungicides and various other substances used to control pests.

Pesticides and their metabolites have received particular attention in the last few years in environmental trace organic analysis because they are regularly detected in food products, surface/ground waters and soil strata throughout the world as consequence of their widespread use for agricultural and nonagricultural purposes. So it is the need of the hour to study the levels of pesticides residues in plants, water and soil and their fate in environment after its degradation.

It would be necessary to work out tolerance limits of pesticides residues in/on crops, soil and water and the efforts, therefore, are directed towards various residue analytical methods like TLC, GLC and HPLC etc. which are suitable for the purpose.

5.1 Sampling

There are different sources of water such as rain, streams, canals, lakes, tanks, ponds, large reservoirs, shallow and deep wells, shallow and deep tube wells, as well as sewage effluents and sea water. The composition of the different sources of water vary with the season, rate of flow, the extent of effluents from the industrial units and sewage effluents from the municipal area during rainy season, the river tank and pond water becomes salty and muddy due to soil erosion. The depth of ground water also varies with the seasons. The sources of water available to the farmer for irrigation of crops are generally few such as canal, shallow and deep wells, pumping sets, tube wells and runoff water collected in excavations along roads, natural drains and adjoining areas under impeded drainage. The composition of water also varies with the season. Whatever may be sources of water, the water sample is taken along with the soil sample to soil testing laboratory for its analysis by way of assessing the suitability of water for irrigation.

For drawing maximum benefit the samples taken be representative of the water in bulk and it should be collected in a clean vessel. One to three litres capacity plastic bottles duly washed with a detergent are satisfactory. However, before filling with water samples the bottles must be rinsed with water samples three times. The information such as farmers name, owner of pumping sets, date and month of sampling depth of ground water, crops and soils being irrigated, any specific agricultural or human problems encountered to be briefly recorded along with the name of village, block, tehsil and district. The water sample should be properly labeled and submitted to soil testing laboratory for its analysis.

4.1 Sampling and Preparation for Analysis

The determination of nutritional need of crops is an important aspect of nutrient management of any plant analysis programme. The need of fruit plants for mineral nutrients differ from those of annual crop species in a number of ways, many of which are related to the perennial nature of tree crops. In perennial tree crops, there is a need to supply nutrients both for ultimate fruit production, the fruits and the vegetative organs, which persist from year to year. The need for leaf analysis in perennial horticultural crops and forest trees has proved its superiority over soil diagnostic methods. This is essentially because of their deeper root system and the fact that nutrients supplied in one year may have its effect on both the nutrition and crop production in following years. However, it is largely being used not as an alternative method to soil testing, but as a supplement to soil testing. Results of foliar analysis are usually interpreted using the critical nutrient level (CNL) approach. Accurate interpretation of foliar analysis using the CNL approach is possible only when sampling is restricted to the same growth stage at which standard reference values have been established (Beaufils, 1971, 1973). The general purposes of plant analyses are: