eChapters

Microbiology is the scientific study of microorganisms, including bacteria, fungi, algae, protozoa and viruses, and their interactions with plants, animals and the environment. Microorganisms are microscopic in size but have enormous importance in agriculture, food production, environmental management and biotechnology. In agricultural systems, microorganisms contribute to decomposition of organic residues, nutrient cycling, soil fertility, plant growth and suppression of harmful organisms. Beneficial microorganisms also form associations with plant roots and improve nutrient availability and plant health. At the same time, certain microorganisms cause plant diseases, food spoilage and environmental contamination. Agricultural microbiology applies the principles of general microbiology to understand these beneficial and harmful activities in farming systems. This chapter introduces the scope and importance of microbiology, major groups of microorganisms, basic laboratory concepts and their applications in agriculture. An understanding of microbial structure, metabolism, diversity and ecological functions provides the foundation for studying soil microbiology, plant–microbe interactions, biotechnology and environmental remediation.

6.1 Soil

The term ‘soil ’is defined in various ways depending on the general professional field in which it is used. However to an agriculturist, soil is the substance existing on the earth surface, which grows and develops plant life. For an engineer, soil is the unaggregated deposits of mineral and organic particles covering major part on the earth crust. It includes widely different materials like boulders, sand, gravel, clays and silts. Soil is produced by the weathering of solid rocks. The formation of soil is due to geologic cycle continuously taking place on surface of the earth. The geologic cycle comprises weathering or denudation, transportation, deposition and upheaval, again followed by the above mentioned processes. Weathering may be natural or artificial. In natural weathering, physical processes like temperature changes, flow of water, ice, wind and rain play the role. In artificial weathering animals especially human beings interference causes soil erosion and formation.

Statistics is defined as a discipline that includes procedures and techniques used to collect, process, and analyze numerical data to make inferences about the data. The word statistic is used as a singular, denoting the numerical data. Statistics are the numerical quantities calculated from sample observations. Here, the word statistics hence is plural. Basically, statistics is defined as the statistical data (in the plural sense) and also as statistical methods (in the singular sense). A clearer and more precise definition is that ‘statistics is the study of methods and procedures for collecting, classifying, presenting, analyzing, and interpreting data to make scientific inferences from it’. Bio statistics is the science dealing with the application of statistical methods to the problems of biological sciences.

2.1 FUNCTIONS OF STATISTICS

a) To present the facts in a definite form: If the data or results are given in numbers, rather than in qualitative statements, they will be more useful. The statements like ‘there is a considerable amount of unemployment in a country or the human population in a state is increasing at a faster rate’ are not in definite forms. The statements should be in definite form like there is a 15 percent unemployment in 2023 or the population is increasing by 5 percent every decade.

Introduction
Statistics is a field of mathematics that pertains to data analysis. Statistical methods and equations can be applied to a data set in order to analyze and interpret results, explain variations in the data, or predict future data. A few examples of statistical information we can calculate are:
Average value (mean)

Statistics involves procedures for collection, classification, analysis, interpretation and presentation of numerical data (Gupta, 1997). Statistical investigations involves four stages ie. collection of data, compilation of data, analysis of data and drawing inferences. For any statistical analysis, first step is data collection which constitutes the foundation for statistical analysis. The required data may be obtained either through survey or an experiment. Survey is the process of collecting data from a population but have no control over the factors which may affect the population characteristics under study, whereas in experiment, data is collected while control is exercised over the factors which may affect the population characteristics under study. Experiments always and almost provide better information than the survey but surveys are necessary in natural populations. When data is not available, it is collected by any of the two methods i.e. census or survey method. In census method, data are collected for each and every unit of the population whereas in sample method a representative sample is drawn from the population on the basis of which all the conclusions are drawn about the population from that sample.

In this chapter, the essentials of basic statistics are explored, with a focus on obtaining all key measures of basic statistics with just a single click. Additionally, the process of creating informative data distribution graphs is also explained.

Basic Statistics

Basic statistics offer fundamental tools that help us to make sense of data. Below, you’ll find concise descriptions of key basic statistical measures.

i. Arithematic mean (average)

The average represents the central value of a dataset, calculated by summing all values and dividing by the number of data points.

ii. Median (middle value)

It is the middle value in a dataset when all values are arranged in ascending order. It’s less sensitive to outliers.

iii. Mode (most common value)

The mode is the value that appears most frequently in a dataset.

iv. Variance

Variance measures how much individual data points deviate from the mean. A higher variance indicates a greater spread.

v. Standard deviation

The standard deviation is the square root of the variance. It provides a measure of how spread out the data is.

vi. Range

It is the difference between the maximum and minimum values in a dataset.

Wool serves as a dense, wavy, and fibrous protective layer for sheep, primarily made up of the insoluble protein keratin. The wool fiber develops from follicles located in the dermis, which is the skin’s middle layer. Each wool fiber comprises two distinct layers:
1. Outer layer: This layer consists of flat, irregularly shaped scales that overlap, resembling fish scales. These scales are less tightly bound than those found in hair and are essential to the wool’s characteristics, such as its capacity to shrink, strengthen, and felt. The outer layer also affects the overall quality of the wool. While the sheep is alive, the outer scales are coated with wool sweat or grease (termed suint), secreted by specialized glands to preserve the fiber’s condition. This grease can be partially removed during washing, and its presence influences the wool’s condition, which pertains to the quantity of grease or oil present in the wool.
2. Inner layer: Known as the cortex, this layer is composed of long fibrils that are bonded together. In contrast to hair, which contains an air-filled medulla in its inner layer, wool does not possess this feature, contributing to its superior strength compared to hair.
Morphological Structure of Wool: Technically, wool comprises three layers: cuticle or epidermis, cortex and medulla.
1. Cuticle: The outermost layer of the wool fiber, referred to as the cuticle, is made up of flat, irregularly shaped scales that overlap with their edges directed toward the fiber tip. This overlapping configuration, akin to roof tiles, produces a rough texture that increases friction and aids in felting. When disturbed, these scales interlock, leading to the entanglement of fibers and the formation of a matted fabric, which is beneficial for felted textiles. Additionally, the cuticle possesses a waxy coating that offers a water-repellent barrier, preventing water penetration while permitting moisture vapor absorption, thereby enhancing wool’s resistance to water-based stains and improving comfort by wicking moisture away.

Wool is a thick and wavy animal fiber makes fibrinous protective covering of sheep. There are 170 different types of proteins are found in wool but the major and foremost protein is keratin. It is insoluble in nature and forms most of the part of wool. True wool fiber is basically modified hair that is not shed like the hair of most farm animals and medulla is absent in true wool. Wool contains excessively scaly surface but hair surface is mostly smooth, less elastic. The matured keratinized fiber extruding above the skin is considered dead tissue. Wool fiber is basically originated from follicle situated in dermis or middle layer of skin. Wool fiber is elastic, hygroscopic, retains warmness, durable, non inflammable and transmits ultra-violet light.

For the accurate identification and diagnosis of plant disease and plant problems a foundational knowledge of terms and definitions is vital for developing concepts, doing research, discussing and communicating issues and providing clarity to your work. The following terms and definitions are basic to the study of plant pathology. They are, however, just a brief introduction to the vocabulary of the science. If you have limited or no background in the subject and you are just getting started, the concepts and terminology of plant problems can seem somewhat daunting. However, your vocabulary and skill will develop through exposure to diagnostics, experience and correct use of the appropriate terms.

Plant pathology is the study of plant diseases and the abnormal conditions that constitute plant disorders. Etiology is the determination and study of the cause of disease. A pathogen can be living or non-living, but usually refers to a live agent. A pathogen is an organism which causes a disease. Pathological is a condition of being diseased. Pathogenic is having the characteristics of a pathogen and pathogenicity is the capability of a pathogen to cause a disease.

A plant disease is an abnormality in the structure and/or function of the host plant cells and/or tissue as a result of a continuous irritation caused by a pathogenic agent or an environmental factor. A disease is not static; it is a series of changes in the plant. All plants, to some extent, are subject to disease. Plant disease is the result of an infectious, or biotic agent or a noninfectious, abiotic factor. Plant injury is an abrupt alteration of form or function caused by a discontinuous irritant. Plant injury includes insect, animal, physical, chemical or environmental agents.

A causal agent is a general term used to describe an animate or inanimate factor which incites and governs disease and injury. A causal organism is a pathogen of biotic origin. When a pathogenic agent is virulent it can cause disease and if the agent is avirulent it is a variant of a pathogen that does not cause severe disease.

Accuracy

The degree of closeness of the determined value to the nominal or known true value under prescribed conditions. This is sometimes termed trueness.

Analyte

A specific chemical moiety being measured, which can be intact drug, bio molecule or its derivative, metabolite, and/or degradation product in a biologic matrix.

Analytical run (or batch)

A complete set of analytical and study samples with appropriate number of standards and QCs for their validation. Several runs (or batches) may be completed in one day, or one run (or batch) may take several days to complete.

Biological matrix

A discrete material of biological origin that can be sampled and processed in a reproducible manner. Examples are blood, serum, plasma, urine, faces, saliva, sputum, and various discrete tissues.

Economics revolves around key concepts such as goods value, price, wealth, income, savings, investment, and consumption. These concepts are interconnected and form the foundation of economic analysis. Below is a detailed explanation of each:
Goods: Definition, Types, and Economic Importance
Definition of Goods
Goods refer to tangible or intangible items that satisfy human wants and have value. Goods can be material (physical objects) or non-material (services), and they play a crucial role in fulfilling human needs and desires. They form the basis of economic activity, as humans constantly seek to fulfil their needs and desires.
Examples
Tangible Goods: You can touch them. Food, clothing, vehicles, dairy products. Intangible Goods (Services): Services you experience. Veterinary services, teaching, medical care.
Classification of Goods in Economics
Goods can be categorized based on different criteria such as material nature, supply, transferability, consumption, ownership, and income elasticity.

Goods and services are created through process of production. After production they have to be transferred or moved from the original producers to the final consumers. This involves the creation of market and the undertaking of number of activities such as buying, assembling, transportation warehousing, risk bearing, financing, selling etc. This constitutes the subject matter of marketing. Hence there is the need for the study of market.

What is market?

Market is derived from the Latin word “Marcatus” meaning trade, merchandise, ware, traffic or place of business. In the ordinary language, market is a place where buyers and sellers meet personally and make their purchases or sales. But in the language of economics, market need not be a place but it may be an area or region meant for potential exchange between a group of buyers and sellers interested in negotiating the terms of purchase and sale of goods and services and such negotiations may be done face to face at a certain place or may be done through other means of communication such as mail, phone, cable, television or through business middle men. Whatever may be the means of communication there will be free exchange or perfect communication between buyers and sellers so that a fairly uniform price prevails for a particular commodity over the whole area at any given time.

The recent availability and use of ultrasonography in veterinary science has revolutionized the study of bovine reproduction. The information- gathering capabilities of this technology are much higher than those of conventional rectal palpation. Ultrasonic imaging has provided new insights into the complex biology of various reproductive processes such as folliculogenesis and early fetal development. With the pressure on agricultural land, due to ever increasing human population, the grazing grounds for animals are fast squeezing and as a result more and more animals are being stall-fed. This practice has adversely affected the availability of essential nutrients to the animals and their reproductive efficiency. The problem is graverin small states, where pressure on land is more to accommodate the expanding developmental and commercial activities of the national capital situated next door. The routine applications of ultrasonography include evaluation of animals for pregnancy, twinning, cyclic structures on ovaries, uterine and ovarian pathologies etc.

Gas Chromatography (GC) was discovered in 1954, a verysensitive technique, whichpavedwaytothisworldfor the resolution ofthe sampleleadingtodetection … identification of the minutest quantity of the desired sample.

Fattyacids were usuallyconverted into correspondingmethyl esters (FAME) to improve volatility and to reduce peak tailing for GC. Usually, FAME could be conveniently prepared by heating lipids with a large excess of either acid- or base-catalyzed reagents. Whereas, acid-catalyzed reagents form FAME from both free fatty acids (FFA) and O-acyl lipids base-catalyzed reagents caused only transesterification, i.e. conversion of O-acyl lipids to FAME and do not usually form FAME from FFAs. A base-catalyzed reaction was a useful alternative to acid-catalyzedreactions whena lipid sample contained acid-labile FAs such as propenoids, present in seed oils from the Malvales order, such as cottonseedoil. To effect solublizationof nonpolarlipids such as triacylglycerols in methanol. the predominant solvent in derivatization reagents, benzene was frequentlyadded to the derivatizalion reaction mixture. However, due to health concerns, use of benzene was discouraged. To help solubilize nonpolar lipids, methylene chloride and tetrahydrofuran had been used in place of benzene.

India is a vast country with varied soil and agro-climatic conditions and therefore is able to grow a wide range of vegetables. In view of their productivity, diversification, nutrition, value addition and export, vegetables are an important component in Indian agriculture. Up to 1939, vegetable seeds were used to be imported from Australia, U.K., U.S.A., but after World War I and II, India started seed production of vegetables. In the recent past, the seed industry has made rapid strides over the past three decades and has contributed significantly to the quantum jump in agricultural production and India emerged as the second largest producer of vegetables, next to China in the world. During 2005-2006, India produced 113.5 million t of vegetables from 7.2 million ha with a productivity of 15.76 t/ha. The seed industry has increased certified and quality seed production and distribution by the organized sector to about 60 lakh quintal from 300q in 1964-65. India can be proud of having launched and managed both crop improvement and seed improvement as simultaneous and parallel programmes playing complimentary and synergistic roles.

Introduction

In chemical laboratories, the use of acids, alkalis and some hazardous and explosive chemicals is unavoidable. In addition, some chemical reactions during the analysis process may release toxic gases and, if not handled well, may cause an explosion. Inflammable gases are also used as a fuel/heating source. Thus, work safety in a chemical laboratory calls for special care both in terms of the design and construction of the laboratory building, and in the handling and use of chemicals.

For chemical operations, it is also necessary to provide special chambers. The air temperature of the laboratory and work rooms should be maintained constant at 20–25°C. Humidity should be kept at about 50 percent. Temperature and humidity often affect soil and fertilizer samples. Temperature also affects some chemical operations. Hence, maintaining the temperature and humidity as specified is critical.

This chapter focuses on the fundamental ways in which meteorological elements directly influence plant growth, development, and ultimately, agricultural productivity. Understanding these relationships is crucial for optimizing farming practices and mitigating weather-related risks. The growth and yield of any crop are profoundly influenced by the prevailing weather and climate conditions. Plants are biological systems highly sensitive to their surrounding environment, and meteorological factors dictate the rates of crucial physiological processes (Fig. 2.1).

2.2 Effect of Weather Parameters on Crops The effect of different weather parameters on crops is given below.

3.1 Introduction
Since the dawn of humanity, the expansion of invention and technological innovation has made it possible to make a variety of goods to meet its needs. To get a competitive edge in the market, the manufacture of a product has three main goals, viz. efficient product planning, efficient manufacturing, and effective cost control.
These can be achieved through a random thinking, if the designer is fortunate to have the best design of a product of interest, which satisfies the needs of its customers. But it will rarely happen. Design thinking maximizes the possibility of happening of the best design in the journey of design a product in shorter possible time.
Design thinking, an emerging field in this direction, tries to create a product by utilizing the following steps.
i. Empathize
ii. Define
iii. Ideate
iv. Prototype
v. Test
3.2 Definition of Design Thinking
A design methodology called “Design Thinking” offers a problem-based approach to problem solving. By understanding the human needs which changes quickly, re-framing the issue in human-centric ways, generating a lot of ideas during brainstorming sessions, and taking a hands-on approach during prototyping and testing, design thinking is incredibly helpful in handling complicated challenges that are ill-defined or unknown. Anyone can use the Design Thinking approach to tackle complex problems that arise in our society, such as those in our businesses, governments, and other spheres of influence, if they have an understanding of these five steps of the process.

Electron microscopy is a specialized branch of science, which uses the electron microscope as a tool. The electron microscope is an instrument which magnify smallest object thousands times. The magnification is not only requirement to see the smallest otherwise invisible object but the details of the object are most important. The details of the object are depending upon the resolving power of the microscope, which is known as the resolution of the microscope. This resolution or power of the microscope is depends upon the wavelength of the illuminating source. The smallest the wavelength of the illuminating sources is the best resolution of the microscope. Electron microscopes use electrons as an illumination source to take advantage of the very short wavelengths attainable in electron beam, which permit a considerable improvement in resolution over the light microscope.

Extension

Extension is that type of education which is stretched out to people in rural areas far and near, beyond the limits of education institutions to which the formal type of education is usually confined.

Education

Education is a process of bringing about desirable changes in the behaviour of human being.

Formal education: The hierarchically structured, chronologically graded ‘education system’, running from primary school through the university and including, in addition to general academic studies, a variety of specialised programmes and institutions for full-time technical and professional training.

Informal education: The truly lifelong process whereby every individual acquires attitudes, values, skills and knowledge from daily experience and the educative influences and resources in his or her environment - from family and neighbours, from work and play, from the market place, the library and the mass media.

Non-formal education: Any organised educational activity outside the established formal system - whether operating separately or as an important feature of some broader activity - that is intended to serve identifiable learning clientele and learning objectives.

Introduction

Extension is a form of education, and extension services provide information, advice, and education for rural development in many countries. It was used for sharing ideas, beliefs, knowledge, and information with rural people in an informal way. In the mid-nineteenth century, extension services were institutionalized, and public funding was spent for organized extension activity in rural areas.

Extension Education

The word ‘extension’ is derived from two Latin roots, namely ‘ex’ meaning ‘out’ and ‘tensio’ meaning ‘stretching.’ Hence, extension means stretching out Figure 1.1.

Extension does not have a universally recognized definition. According to Webster, education is a process of teaching to develop the knowledge, skills, and character of students. Sociologist Rodney Stark declares that “Education is the cheapest, most rapid and most reliable path to economic advancement under present conditions.” Education is a lifelong process, and it is necessary to transfer experience and knowledge to the next generation for political and socio-economic development.

University extension started at Cambridge University, London University, and Oxford University before the nineteenth century. The success of extension in Britain led to the initiation of extension education in the United States later. In India, university extension was introduced after the establishment of State Agricultural Universities in a similar pattern to Land Grant Colleges in the United States.

Extension as a form of education facilitates the learning or acquisition of knowledge, skills, values, and habits. As an education, it can be informal, formal or non- formal. It can also be categorized as child education, adult education, technical education, health education, social science and humanities, etc.

Formal education: It is an institutionalized, chronologically graded, and well- structured system of education that starts from schooling to higher education. Formal education is usually given in structured classrooms in schools and colleges with a fixed syllabus, course curriculum, and certificates awarded after examination. In formal education, only qualified teachers impart education to the students.

Flow Cytometry is a tool used to detect and measure chemicophysical characteristics of a population of cellular particles. Modern day biomedical research needs the molecular assembly of tools to proceed in the advent of biomedical research with real time diagnostic, prognostic and experimental detection of markers. For the same, a naïve tool is flow cytometry. In this technique, a sample having cells or particles is suspended into a fluid and injected into instrument. The ability to perform these measurements in a very rapid time span is one of the key advantages of the flow cytometry process. A single-cell suspension must first be prepared in order to analyse solid Tissues. A flow cytometer is look alike to microscope, except that, instead of producing an image of the cell, it generally offers a cell-by-cell basis high-throughput, automated quantification of specified optical parameters.

They can quantify up to three to six properties or components are quantitated in a single sample, cell by cell, for about 10,000 cells, in less than one minute. Sample is focused to ideally flow one cell at a time through a laser beam, where the light scattered is characteristic to the cells and their components. These cells are tagged with fluorescent markers in order to absorb the light and then emitted them in the form of band of wavelengths. Average ten thousand cells can be quickly examined and the data gathered are processed by a computer.

7.1. Introduction

Cultivation of crop is one of the most important aspects on which the success of a greenhouse depends. Principally it is similar to that of open field cultivation; but it is a completely different proposition in comparison. In greenhouse it needs (1) high precision technology, (2) special management, and (3) high qualityinputs. A special crop husbandry is extremely necessary, integrating all these three aspects, for successful greenhouse cultivation.

Why special crop husbandry? – Ancestors of each and every crop of modern time once grew out of its own in wild, without any human intervention. Gradually it has been domesticated or brought under cultivation by progressive alteration of its natural growing and reproduction process. Even the genetic nature also altered gradually. Till recent past these development of domestication process has been restricted principally on reproduction, planting, nutrient supply, water supply, and plant protection aspects. Interestingly most of these aspects are still very much supplementary in nature, as a good percent of it is still dependent on nature and its growing system.Actually, we cannot confer any significant change, physically or genetically, in their adaptation against the natural elements like rain, sunlight, temperature, humidity, gas supply, etc. However, we try our level best with a compromising note on local climate.

Hence there is ample scope to go for complete alteration of their growing habit/ practices in relation to each and every aspect of the climatic elements. It is a very difficult job, because, for a small change in any individual aspect of plant growth, all the other aspects are affected. Thus, one has to make a proper and holistic balance of alteration of all the growth aspects for each and every individual domesticated plant, we call as crop.

Landscape Gardening

Landscape gardening is an aesthetic branch of Horticulture which deals with planting of ornamental plants in such a way that it creates a picturesque effect. According to Chambers’ dictionary, the definition of landscape is the appearance of that portion of land which the eye can view at once and landscape gardening is the art of laying grounds so as to produce the effect of a picturesque landscape. Landscape gardening can be defined as the decoration of a tract of land with plants and other garden materials so as to produce a picturesque and naturalistic effect in a limited space. According to Bailey, Landscape gardening is the application of garden forms, methods and materials to the improvements of the landscape and the landscape in this connection is any area large or small on which it is desirable to develop a view or design. So landscape may or may not include plants.

Landscape gardening can also be defined as the beautification of a tract of land having a house or other object of interest on it. It is done with a view to create a natural scene by the planting of lawn, trees and shrubs. Landscape gardening is both an art and science of the establishment of a ground in such a way that it gives an effect of a natural landscape. It can be also defined as the imitation of nature in the garden. It can also be defined as improving of total living environment for the people. In light of all the foregoing definition landscape gardening can be defined more appropriately as art of creating gardens, parks and other green areas.

Landscape design seeks to create balance between living and natural environments in order to derive the greatest use and enjoyment from outdoor space. A landscape to a landscape designer is like a slab of marble to a sculptor or the insides of a home to an interior decorator; a landscape is the canvass on which the landscape designer crafts his or her masterpiece. Since the landscape gardening is the making pictures on the ground with plant and other material, landscape designer should be proficient in art, ornamental gardening, ecology and physiology. He should be an architect and engineer to appreciate the relationship between plant form, colours and buildings.

SUMMARY

In the context of increasing population pressure, diminishing per capita land holding, and employment crisis, livelihood security of Indian rural population has become important concern today. The livelihood of the people is dynamic, diverse and complex in nature. The livelihood comprises the people themselves, the assets they posses, the activities they do and the output they gain from their activities. According to the need, availability of the resources and capacity, people used to select their livelihood strategies like agricultural intensification, livelihood diversification or they migrate to the other places to find alternative livelihoods.

Deoxyribonucleic acid (DNA) is a molecule made up of pairs of building blocks called nucleotides. The four kinds of nucleotides that make up DNA are adenine (abbreviated as the single letter A), guanine (G), cytosine (C), and thymine (T). The DNA molecule has the shape of two intertwined spirals, referred to as a double helix. DNA is packaged into chromosomes that are located within the nucleus of all cells. These chromosomes are the same in every cell of an organism and together make up the organism’s genetic information, its genome. Chromosomes contain stretches of DNA called genes that code for amino acids that make proteins. It is the proteins that are the foundation of life for all organisms. The interaction and structure of proteins determine the visible characteristics or phenotype of an organism, while the genetic makeup of an organism is called its genotype.

The sequence of nucleotides that make up a gene can differ among individuals. The different forms of a gene are called alleles. The alleles are the result of nucleotide differences in a gene that affect an amino acid sequence of a protein. This can result in a change, addition, or deletion of a protein that can affect the phenotype.

Introduction

Electrical Engineering generally uses a consistent, structured approach to the solving of various practical problems. An acceptable problem-solving approach and method can be defined, although variations can be seen in specific problems. Problems need to be approached methodically, applying an algorithm by which engineer arrives at an acceptable solution.

Problem-Solving Process in Engineering: (i) Define the engineering problem (ii) Create a mathematical model (iii) Develop a computational method for solving the problem (iv) Implement the computational method (v) Test and assess the solution.

A. Construction, Use and Care of Light Microscope
Introduction
Microorganism are invisible to naked eyes, hence their detailed study requires a microscope. A microscope can be defined as an optical instrument consisting of a lens or a combination of lenses for getting enlarged or magnified images of minute objects. A simple microscope is essentially an ordinary magnifying lens held on an adjustable stand. Usually it gives magnification up to 20 times the size of the object. A compound microscope consists of two separate lens system – the objective and the eye piece. It gives much greater magnification (100-1500 times) than a simple microscope and is, therefore useful for viewing and examining very minute objects like protozoa, bacteria, yeast, mold and algae which cannot be seen with naked eyes.
The objective of this exercise is to familiarize the students with construction and the use of compound light microscope.
1. Construction of Microscope
A microscope contrite various parts in which principle parts are described below:
i) Frame work: All microscopes have a basic frame structure which includes the arm and base. All other parts are attached to this framework and the base support the microscope.
ii) Stage: It is a horizontal platform that supports the microscopic slide. It has a mechanical stage, which is used for holding and moving the slide around on the stage.

Only a very brief mention of various basic aspects of plant nutrition is given here. Associates wanting to know more details should refer to any one of the standard Plant Nutrition publication (PRINCIPLES OF PLANT NUTRITION by K. Mengel and E.A. Kirkby).

Increased production of food and cash crops is the need of our times; as land and irrigation water are limited and beyond any means of expansion. Crop yields per unit input should increase. Crop yield under natural production systems is limited by the availability of nutrients in the soil. Unless the supply of nutrients can be enhanced yields cannot be high.

15.1 Law of Mass Action

Gulberg and Waage, the two Norwegian chemists in the year 1864 stated the law of mass action in this form: ‘The velocity of any chemical reaction at any instant at a given temperature is proportional to the active mass of each of the reactants at that instant present in the system, the active mass in a homogeneous system is defined as the number of gram molecule of the substance present per unit volume i.e., the molar volume’.

8.1. Law of Mass Action

Gulberg and Waage, the two Norwegian chemists in the year 1864 stated the law of mass action in this form: ‘The velocity of any chemical reaction at any instant at a given temperature is proportional to the active mass of each of the reactants at that instant present in the system, the active mass in a homogeneous system is defined as the number of gram molecule of the substance present per unit volume i.e., the molar volume’.

Mathematical Formulation of the Law of Mass Action

Let us take a simple case of a reversible reaction at constant temperature represented by the equation:

Traditionally, remote sensing encompasses a wide array of technologies and methods used to gather information about objects, areas, or phenomena without direct physical contact. This includes devices like seismographs, fathometers, radar systems, and more. These tools enable us to observe and measure various aspects of the environment from a distance.

However, in contemporary contexts, when we talk about remote sensing in a more specialized sense, we often refer to the use of satellite and aerial-based systems to capture and analyze electromagnetic radiation reflected or emitted from the Earth's surface. This form of remote sensing has become incredibly valuable in fields such as environmental monitoring, urban planning, agriculture, forestry, and disaster management, among others.

Modern remote sensing techniques leverage sensors capable of detecting specific wavelengths of electromagnetic radiation, such as visible light, infrared, and microwave radiation. By analyzing the patterns and intensity of this radiation, researchers can derive valuable information about the Earth's surface features, including vegetation cover, soil moisture, land use, and changes over time.

In statistics, sampling is concerned with the selection of a subset of individuals from within a statistical population to estimate characteristics of the whole population. Two advantages of sampling are that the cost is lower and data collection is faster than measuring the entire population. Each observation measures one or more properties (such as weight, location, colour) of observable bodies distinguished as independent objects or individuals. In survey sampling, weights can be applied to the data to adjust for the sample design, particularly stratified sampling. Results from probability theory and statistical theory are employed to guide the practice. In business and medical research, sampling is widely used for gathering information about a population. Acceptance sampling is used to determine if a production lot of material meets the governing specifications.

The sampling process comprises several stages

• Defining the population of concern

• Specifying a sampling frame, a set of items or events possible to measure

• Specifying a sampling method for selecting items or events from the frame

• Determining the sample size

• Implementing the sampling plan

• Sampling and data collecting

Sensory evaluation is a scientific method of evaluating foods including meat products that applies principles of experimental design and statistical analysis through the use of human senses like sight, smell, taste, touch and hearing. It is also called organoleptic evaluation in which we measure, analyse and interpret reactions to those characteristics of materials as they are perceived by the human senses. These attributes can be perceived well by the human sense organs as compared to instruments available for this purpose. It is a fact that no single instrument is able to assess all the attributes of meat products. With the help of these instruments we can very well evaluate the single quality attribute of meat product i.e. shear force instrument or penetrometer is good for knowing the texture and refractometer is for colour interpretation.

M. D. SURANAGI

Software is a tool that allows the hardware to process and manipulate data. It is essentially a list of commands; therefore it is not something you can touch. Software is stored in the different drives in a computer. Software, like data, can be stored and shared through disks. Unlike hardware, software is not permanent. It can be added, removed, and changed very easily. Individual software pieces are normally called programs. There are different types of programs. The three major categories of software are System software, Application software and Programming software.

• System software like device drivers and utilities enables the application software to interact with the computer hardware.
• Programming software like compilers, debuggers and interpreters provides tools to assist a programmer in writing computer programs.
• Application software is what most users commonly use to interact with their computers and carry out various daily tasks.

Soil sampling is an integral and essential component of soil fertility evaluation and nutrient management research. The effectiveness of soil sampling is a prerequisite for soil testing to achieve its goals for efficient nutrient management and plant nutrition for improved yield and quality. The underlying basis for soil sampling is that a soil sample taken represents the “population” which may be a plot, field or a watershed. It further implies that nutrient status of the representative soil sample(s) determined in a laboratory would reflect nutrient status of a plot, field or watershed and is of interest for correcting nutrient disorders in the field or watershed.

The most important factor that influences the effectiveness of soil sampling is soil heterogeneity. However, in a relatively homogenous group of fields or plots, a small number of samples may be sufficient to represent the population to a more heterogenous group of fields that would require more number of samples to represent the soil population. Whenever, soil samples to be taken in field following points needs to be kept in mind.

A. Principles of spices breeding
Plant breeding is a science-based technique aimed at improving the genetic makeup of plants to develop desirable traits such as increased yield, resistance to diseases and pests, improved quality, and adaptability to various environmental conditions. When applied to spices, these principles are adapted to meet the unique characteristics and challenges of spice crops.
A.1. Understanding the breeding objectives
• Yield improvement: Increasing the yield of spices like black pepper, ginger, and turmeric is a primary goal. This involves selecting varieties that produce more berries, rhizomes, or seeds.
• Quality enhancement: For spices like vanilla, cinnamon, and saffron, the focus is on enhancing the quality of the product, such as increasing vanillin content, oil content, or curcumin levels.
• Disease and pest resistance: Developing resistant varieties is crucial for spices prone to specific diseases, like black pepper’s vulnerability to foot rot or large cardamom’s susceptibility to fungal diseases.
• Adaptation to environmental conditions: Breeding efforts often aim to produce varieties that can thrive in specific climates, such as the cool, shaded forests required for large cardamom or the arid conditions suitable for cumin.

Introduction

This chapter is intended to throw light on some statistical and econometric methods used for analysing time series data with specific emphasis on basic concepts related to time series analysis, co-integration techniques as well as forecasting techniques such as ARIMA model. Time series analysis is often helpful in revealing the broad patterns associated with longitudinal data, which in turn would aid in important economic and policy decisions. In fisheries sector too, economic variables such as market demand and supply, prices, etc. are of prime importance and often come in longitudinal format. There are a number of alternative methodologies available in the time series literature to determine relevant parameters pertaining to longitudinal data and the ensuing sections are set apart to delve deeper into this realm.

Some Key Concepts

Stationary Stochastic Process

A random or stochastic process is a collection of random variables ordered in time. A stochastic process is said to be stationary if its mean and variance are constant over time and the value of covariance between two time periods depend only on the distance or the gap between the two time periods and not the actual time at which the covariance is computed. In the time series literature, such a stochastic process is known as a weekly stationary or second order stationarity or covariance stationarity.

During recent years ultrasonography has become an indispensable diagnostic modality in human and veterinary medicine because of its non-invasive nature, providing visualization of internal organs, and quick results. Birth of ultrasound took place in 1794 when an Italian biologist Lazzaro Spallanzani discovered that bats used sound waves for navigation. Since then continuous developments and advancements in the technology have made the sonography a dependable and an easily accessible diagnostic modality.

Introduction

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization and changes in our life style. Large quantities of organic wastes are produced from agricultural production and farming systems which include animal manures, sewage biosolids, food wastes, and industrial organic wastes. Globally, these wastes have the potential of increasing soil and water pollution as because they are currently disposed of by land-spreading, incineration, or into landfills. As much as 50%-60% of the total wastes that are disposed into landfills are organic wastes. If these were turned into materials useful in farming system, there would be great savings in primary plant nutrients and metabolic energy.

Vermicomposting has been arising as an innovative eco-technology for the method by which compost or mixed manure of organic origin or conversion of various types of waste is prepared by the use of earthworms. It is a controlled degradation (non-thermophilic, boioxidative process) of the organic wastes for the consumption of earthworms, helps in the recycling of food wastes, reduces the waste bulk density and the final product may contain hormone-like substance which accelerates the plant growth. Vermicompost is humus like, finely granulated and stabilized material which can be used as a soil conditioner to reintegrate the organic matter to the agricultural soils. Industrial wastes remain largely unutilized and often cause environmental problems like ground and surface water pollution, foul odours, occupying vast land areas etc. Non-toxic and organic industrial wastes could be potential raw material for vermitechnology. In the last two decades, vermin-technology has been applied for the management of industrial wastes and sludges and to convert them into vermicompost for land restoration practices. The success of the process depends upon several process parameters like quality of raw material, pH, temperature, moisture, aeration etc., type of vermicomposting system and earthworm species used. Vermicomposting and vermiculture are two interlinked and interdependent processes where vermiculture can be done in the presence of decomposable waste organic matter

Elephants are the simple stomached animals and colon is associated with digestion, predominantly. Elephants are the herd animals (gregarious in nature) and belong to the matriarchal groups (Leader of herd is usually a cow elephant)

In the last chapter, we have broadly introduced the concept of tracer hydrology and also the concepts of isotopes as tracers, their characteristics and measurement techniques. In this chapter let us see the basis of application of each group of isotope tracers, injected and environmental.

What are the different groups of isotope tracers used in hydrology and how are they classified?

Genetic Basis of Heterosis

There are three theories to explain the genetic basis of heterosis: (1) dominance hypothesis, (2) over-dominance hypothesis and (3) epistasis.

Dominance Hypothesis

Davenport (1908) first proposed this hypothesis and he considered that heterosis is a consequence of action and interaction of favourable dominant genes brought together in a hybrid. Bruce, Keeble and Pellew explained it in 1910. This hypothesis suggests that at each locus the dominant allele have favourable effect, while recessive allele has unfavourable effect. In heterozygous state, deleterious effects of recessive alleles are masked by their dominant alleles. Thus, heterosis results from masking of harmful effects of recessive alleles by their dominant alleles. The harmful effects of recessive alleles, which becomes homozygous due to inbreeding. Therefore, according to dominance hypothesis, heterosis is not the result of heterozygosity; it is the result of prevention of expression of harmful recessive allele by their dominant alleles (Fig.1). In this hypothesis, there are two objections (i) the first objection relates to the failure in isolation of homozygous lines for all the dominant genes, and (ii) the second objection is directed at the symmetrical distribution in F₂. Both the objections are discussed below:

Individuality tells us what an animal seems to be; his pedigree tells us what he ought to be, but the performance of his progeny tells us what he is
Effectiveness of selection depends on ability to recognize those animals, which possess superior inheritance. Those superior animals must be mated together for the production of offspring. The aids available to estimate the breeding value of an animal is through the phenotype of an animal or its relatives.

ABSTRACT

Folivorous bats consume flowers and fruits, effecting seed dispersal and pollination. Adaptation of plants according to the type of pollinator is called pollination syndrome. Some of the adaptations of bat-pollinated syndromes are nocturnal anthesis

Bathua is an old plant that is also known as lamb’s quarters or cheel bhaji. Its scientific name is Chenopodium album. In India, the plant leaves are boiled and consumed like other green vegetables. Chenopodium is a weedy annual plant with a high growth rate. This is completely natural and a distinguishing feature of the plant. When the leaves mature, the powdery residue disappears. Look for younger leaves if eating raw. Otherwise, look for sturdy, robust leaves that aren’t wilted.

Botany and taxonomy Chenopodium album is a weedy annual plant belonging to the Chenopodium genus. 

This chapter explains how B-cell receptors, T-cell receptors and major histocompatibility complex molecules participate in antigen recognition. It differentiates MHC class I and class II pathways and describes the processing of endogenous and exogenous antigens. The roles of dendritic cells, macrophages and B lymphocytes as professional antigen-presenting cells are examined. Topics include MHC restriction, antigenic peptides, proteasomal degradation, ubiquitination and recognition by CD4-positive and CD8-positive T lymphocytes. The chapter also discusses superantigens, opsonization, phagocytosis, T-independent antigens and species-specific MHC systems such as BoLA and the avian B complex. These concepts explain the initiation of adaptive immune responses.

1) Anthracnose
Diagnostic Symptoms
• All the above ground parts are affected. However, the characteristic symptoms appear on pods.
• On cotyledons, spots are sunken dark brown or black with pink spore mass.
• Seedling infection results in collapse of seedling.
• Spots on leaves appear on lower side and are black. Later these may also appear on upper surface. When the infection is severe, the affected plants wither off.
• Black, sunken, circular spots of varying sizes appear on pods with bright red, yellow or orange margins. The centre of these spots later turns grey or pink due to sporulation of the pathogen. The border of these spots appear raised (Fig.1).

Bearing: Bearing is connotation of flowering and fruiting.

Bearing habit: The position of f lower bud with respect to vegetative growth of the plant after the cessation of juvenility. Different fruit plants have different habits.

Depending upon position of fruit bud, fruit trees may be categorized as under:

1. Shoot flowering: Terminal flowering: Banana, Pineapple, Mango, Litchi, Avocado Lateral flowering: Coconut, Papaya, Guava, Orange, Ber, Passion fruit, Bread fruit
2. Stem /Branch bearing: It also known as caulifluorous bearing habit. In this habit, flower and fruit appear directly from the main stem or branch. Example: Jackfruit, Cocoa, Durian,
3. Spur bearing: It is a shot stubby shoot of more than one year age which bears fruit bud in many fruit plants. Example: Apple, Pear, Peach, Plum, Cherry, Grape, Apricot etc

Bearing

Bearing is connotation of flowering and fruiting. When a fruit tree flowers and fruits, it is said in bearing condition. Different fruits have different bearing habits, inflorescences, types of flower, mode and medium of pollination, pollen viability and all these account a lot for the bearing of fruit plants.

Bearing habit

If one observes a mango tree, he/she may find it does produce the fruits terminally on a shoot and it citrus he/she finds the fruits always produced laterally in the leaf axils. The manner or patter in which a plant produces its fruit is known as bearing habit or fruiting habit. Bearing habits are specific to the kind of plant. In determining the bearing habit of any plant three points are to be considered.