eChapters

Introduction

Sensors are the key components for enabling any IoT(Internet of Things) application. The concept of IoT came as early as 1990 but the practical implementations of the IoT technology is actually becoming possible as the cost of the devices that are needed to create any IoT application have reduced. Sensors are one of the major hardware components needed to form IoT systems and decrease in its price has given a forward leap in developing IoT applications. Sensors have to be uniquely identifiable devices with a unique device ip address so that they can be easily identifiable over a large network. These have to be active in nature which means that they should be able to collect real time data. These can either work on their own (autonomous in nature) or can be made to work by the user depending on their needs (user controlled).

Sequence Alignment

Sequence Alignment is the procedure of comparing two (Pair-wise Alignment) or more (Multiple Sequence Alignment) sequences by searching for a series of individual characters or character patterns that are in the same order in the sequences.

Significance: Discovering functional, structural and evolutionary information in biological sequences.

Introduction

The word ‘Sericulture’ is derived from the Greek word ‘sericos’ meaning ‘silk’ and the English ‘culture’ meaning ‘rearing’. It refers to the mass scale rearing of silkworm for obtaining silk from them. Mulberry sericulture involves production of silk using mulberry as the host plant. Silk is known as Resham in Hindi, Soie in French, Seide in German, Seda in Spanish, Seta in Italian, Tsi in Chinese, Soi in Korean, Knu in Japanese, Solk in Russian etc. It is regarded the queen of textiles as it is most elegant among all the  textile fibers with unparalleled grandeur, natural sheen, inherent affinity for dyes, high absorbance, light weight with soft touch and high durability.

The major requirement that distinguishes frozen semen/IVF laboratory from other laboratories is the need to maintain aseptic conditions. The wash up and sterilization of media and other equipments should be located at one end of the room and clean area for sterilize handling at the other end, and preparation, storage and incubation in between. The storage and incubation area should be near to the sterile working area.

In recent years, the introduction of laminar flow cabinets has been a great boon in providing a sterile working area and allows the use of unspecialized laboratory accommodation for culture work. For sterile work, area should be in a quiet part of the laboratory preferably in a cubicle where a laminar flow cabinet is suitably fitted. The area should be free from dust or draughts. Nothing should be stored on the laminar flow cabinet or bench used for sterile handling except most necessary equipments like holding pipettes etc. The laminar flow cabinets provide sterile air blown over the work surface. For laboratory, a horizontal laminar flow is more preferable as opposed to a vertical one because of ease of handling the ovaries etc. If an air curtain is provided at the door of the cabinet, introduction of dust etc. can be avoided. In India laminar flow are manufactured by companies like Clenzoids, Yorco etc, among others. The laminar flow size should be a minimum of 300 X 300 or 450 X 450 mm with a 12-18 in, square filter size).

The animals are mostly social ones and prefer living in herds. In each species there are certain rules for group survival, cohesion, defence and also for propagation. The basic patterns of male sexual behaviour appear to be innate in nature. Kids of both sexes are very often seen exhibiting sexual display during play and mounting is seen most commonly. In females the sexual receptivity is restricted to few hours or days near the estrous phase of the estrous cycle, while in males the sexual receptivity is grossly permanent. The physiological signals for arousal of sexual motivations originate from gonadal steroid balance. However, the secretion of gonadal steroids is not permanent. In males the androgen secretion is in the form of several peaks within 24 hours reflecting the pulsatile release of pituitary gonadotropins. However, the total amount of androgen in males is almost constant practically for day to day. In females the secretions of estrogens are restricted only during few days (follicular phase) of the estrous cycle.

6.1. Introduction

Food packaging has a significant contribution in preserving the quality of the food throughout the processing and storage. The package containing food should maintain the quality of the product for the longest time under particular environmental conditions. The quality of various food and beverages decline with the passage of time and food become unacceptable to consume. The time in which food deteriorates and become unacceptable is termed as shelf-life. The degradation of quality with time under storage conditions depends upon intrinsic as well as extrinsic factors. The shelf-life study of a product provides important information to manufacturer and consumer regarding the quality of the food product throughout the storage time.

The goat rearing on extensive rearing system has been practiced since ancestry for livelihood and nutritional security of poor, landless and marginal farmers of our country with the flock size ranging from 2-10 goats. However, in the recent past, goat rearing is shifting towards semi-intensive and intensive rearing systems for commercial purposes with flock size ranging from 25 to 500. The goats reared in small flocks needs minimal housing facilities following the scientific principles with low-cost structures. On the other hand, elaborate housing is generally recommended for goats raised under large scale commercial production systems. Separate housing arrangements for different categories of animals viz. growers, pregnant females, lactating females, breeding males, etc. are to be ensured for rearing goats scientifically for harnessing maximum output sustainably.

Abstract: Shifting cultivation locally called Jhuming is a part and parcel of tribal life of the North Eastern Hill Region of India and it has direct bearing with their socio-cultural system. It is a boon to the farmers as long as the jhuming cycle is sufficiently longer (10-15 years) as this would not only produce a good crop but also gives sufficient time for ecological restoration and biophysical balance. However, with the increase in population pressure on land the jhuming cycle is getting drastically reduced (3-6 years). As a result of this, soil health is getting degraded and overall ecosystem is in threat. Many important flora and fauna are in the verge of extinction. As we cannot run away from the problem at least thinking about posterity, we have to find a decisive solution immediately. Developing improved methods of jhum cultivation like proper bunding, residue recycling, use of high yielding varieties etc. are few short term options. However long term viable options would be proper land configuration like terraces, water harvesting, agroforestry, adoption of integrated farming system approach and above all education and awareness among the tribal farmers which would help in sustaining the ecosystem of the region.

A genome is an organism’s complete genetic signature and the collection of information that an organism can pass on to its offspring. Genomics, the study of the structure, function, and evolution of entire genomes is principally dealing with genetic information which helps us to understand how organisms and ecosystems work, how theymalfunction, or how they might be melded to human needs. The model organisms used in genomics have, in general, small genomes and short generation times. To meaningfully analyze the gene-to-phenotype relationships, a large amount of sequencing information is necessary. Progress in DNA sequencing technologies leads to accumulate Information about structures of genomes (Mohan Kumar, 2007).

HISTORY OF INSECT GENOMICS

Commencing from the publication of the entire nucleotide sequence of the genome of Haemophilus influenzae in 1995, a complete genome sequence of many organisms, including lower and higher eukaryotes, have been reported. The cost-effective way to get sufficient sequence information to address the questions is to sequence a high-quality reference genome and then map sequences from other genomes onto the reference sequence. Insects constitute the vast majority of known species with their importance including biodiversity, agricultural, and human health concerns. Hence, a study of Insect genomics is imperative to elucidate information to other organisms.

Abstract: Stall feeding to cattle is not practiced in the Andaman Islands since generations. In the morning, after milking, cattle are allowed to go for free range grazing in the nearby forest or coconut arecanut orchards. But, like mainland territory the cattle do not form herd. They are trained in such a way that come back home during evening where they are fed with concentrate before the milking. Coconut and arecanut orchards occupying more than 14000 ha land are second major land use after forest in the Islands. The forage production in the grazing lands are not sufficient to meet out the demand of huge livestock population particularly during the lean period, form January to April. An attempt has been made to know the effect of four N fertilizer levels (0, 60, 80 and 120 kg ha-1 N) on net soil N mineralization rate (NMR) and soil moisture (SM), and shoot biomass (SB), FP, shoot biomass/root biomass ratio (SB/RB), N concentration in SB, N uptake and nitrogen use efficiency (NUE) of three grasses [Guinea (Panicum maximum Jacq.), Para (Brachiaria mutica (Forssk) Stapf) and Hybrid-napier (Pennisetum purpureum Schumach.)] under three canopy positions [under canopy (UC, representing high shade), between canopy (BC, representing low shade) and open] of coconut trees (Cocos nucifera L.) in a coconut based silvopastoral system in the Island conditions. The study has revealed that the tree reduces light 59% under UC and 32 % under BC positions, but the N fertilizer levels increase NMR by 11 to 51 % under UC and 3 to 44 % under BC positions compared to the open. SM does not differ across the canopy positions

Simple Random Sampling (SRS)

Simple random sampling is probability sampling and refers to a technique of sampling where each and every unit of the population have an equal and independent opportunity of being selected and included in the sample during the sampling. In the SRS the selection of the sample depends on the chance factor and is also known as the method of probability sampling.

There are two ways in which SRS can be performed:

• SRSWR: Simple Random Sampling With Replacement
• SRSWOR: Simple Random Sampling Without Replacement

1. Introduction

Size reduction is applied to all the ways in which particles of the solids are cut or broken into smaller pieces. Size reduction operation of solids is referred to as 'Comminution", some of the common comminutive processes are - crushing, grinding, milling, mincing, and dicing. Breaking down of large sized particles of food substances into smaller particles is a common unit operation in many food processes, e.g. wheat flour, turmeric powder, spices, etc. are mostly used in powdered form. Some ofthe common objectives that are fulfilled by size reduction are:

16.1. INTRODUCTION

Millets are a large part of the basic diet for farm households in the world's poorest people in the poorest countries. The production of millets on average for the 5 years have been given in Table 16.1. Top consuming countries are India, Nigeria, Niger and China. However, just because a country is a top global consumer does not mean that millet is a significant source of calories for them. India and China are rank as the 1st and 4th consumers of millet, but due to their population size they rank 11th and 38th in per-capita consumption, accordingly.

Millet particularly the finger millet) is an excellent dietary source of calcium, iron, manganese, and methionine-  an amino acid lacking in the diets of hundred of millions of the poor who live on starchy foods such as cassava, plantain, polished rice, and maize meal. Millet use is diverse, including in cereals (including porridge and kasha), soups, breads and stuffings, fermented beverages, and baby food.

4.1    Urban Issues
    
4.2    Environmental Ethics - Issues and Possible Solutions
    
4.3    Water Conservation
    4.3.1 Rainwater Harvesting
    
4.4    Greenhouse Gases and their Sources
    4.4.1 Climate Change
    4.4.2 Global Warming
    4.4.3 The Greenhouse Effect
    4.4.4 Consequences of the Greenhouse Effect
    4.4.5 Acid Rain, 176
    
4.5    Ozone Layer Depletion
    
4.6    Nuclear Accidents
    
4.7    Waste Reclamation
    
4.8    Consumerism and Waste
    
4.9    Forest (Conservation) Act 1980
    
4.10    Wildlife Protection Act
    
4.11    The Air  (Prevention and Control of Pollution) Act 1981
    
4.12    Water (Prevention and Control of Pollution) Act 1974
    4.13    The Environment (Protection) Act, 1986
    4.14    Environmental  Laws

Introduction

In general economic model, technological change in agriculture is expected to cause the commodity supply curve to shift down and out against a stationary demand curve, giving rise to an increase in quantity produced and consumed, and at a relatively lower price. Agricultural economists have used supply and demand models of commodity markets to represent agricultural research impacts, beginning with Schultz (1953) and Griliches (1958), with important subsequent contributions by Duncan and Tisdell (1971), Akino and Hayami (1975), among others. Such a model is explicitly used in many studies. However, low crop productivity, food insecurity, hunger and malnutrition; inadequate farming knowledge and skills, implements and inputs are characteristic of smallholder agriculture in developing countries including India. Many researchers argue that conservation agriculture can guarantee higher crop productivity, food security, improved net income of the farmers and environmental protection, better than the traditional systems of cultivation practices.

ABSTRACT
It is impossible to envision a world without energy provisions and has become inevitable and an integral part of a nation’s prosperity. It has unparallel contributions towards the socioeconomic empowerment, industrial growth, and technological advancements, as also in mitigating greenhouse gas (GHG) emissions. Judicious utilisation of energy sources without infringing upon the sustainable energy demand is the need of the hour. Taking India’s huge bovine strength into account, biogas technology has the potential to transform the standard of living of rural millions. Effectively implementing the Govt. of India’s National Biogas and Organic Manure Programme (NBOMP) could save precocious demand on electricity, fertiliser and firewood while promoting self-sustainable organic farming. In this chapter, the cost and benefit analyses of biogas technology (involving biogas plants of different capacities) are discussed along with the long-term approach at the grassroots level to promote digested slurry for organic farming. The commercialisation and carbon crediting of biodigester technology is also narrated. It is necessary to chalk out a revenue model to commercialise slurry at the grassroots level to economically empower the beneficiaries, from family-type to industrial-scale biogas plants. Small-scale biofertiliser hubs at district level may be organised to collect dry slurry from the beneficiaries and process them further to make it market-ready through entities operating at the national level developing manure for agricultural practices, as also feeding materials for animal husbandry practices.

Biology is in the middle of a major paradigm shift driven by computing technology. Due to the impact of information technology, biological sciences have been rapidly becoming much more computational and analytical. Rapid progress in research in the field of genetics and related field combined with the tools provided by modern biotechnology has generated massive volumes of genetic and protein sequence data over last two decades. Compilation, storage, analysis for extraction of information and knowledge from this data becomes a challenging task as usual analytical procedures are not directly applicable to these data sets.
 
Bioinformatics has been defined as a means for analysing, comparing, graphically displaying, modeling, storing, systemising, searching, and ultimately distributing biological information, which includes sequences, structures, functions, and phylogeny. Thus, bioinformatics may be defined as a discipline that generates computational tools, databases, and methods to support genomic and post-genomic research. It comprises the study of DNA structure and function, gene and protein expression, protein production, structure and function, genetic regulatory systems, and clinical applications. Bioinformatics applications need knowledge from computer science, mathematics, statistics, medicine, chemistry and biology.

Introduction

Soil organisms contribute to the maintenance of soil quality in that they control the decomposition of plant and animal materials, biogeochemical cycling of elements, including nitrogen fixation; the formation of soil structure and the fate of organics and inorganics applied to soils. Soils and their biodiversity thus play a critical role in maintaining soil health. Non-return or diminished return of organic matter and residues deprive the soil biota of their food with loss of soil health and fertility. A large, diverse, and active population of soil organisms is the most important indicator of a healthy soil. The effects of physical and chemical degradation of soils are obvious. But the effects of biological degradation which is caused due to loss of specific soil organic matter (SOM) fractions (and consequently the loss of microbial species/communities dependent on them for nutrition) as well as and specific toxicity influences on soil flora and fauna are insidious. Proper management of soil biodiversity will help in sustainable agriculture and reduce the cost of external inputs especially for nutrient supply and crop protection.

Introduction

Soil biology is the study of the complex system of interrelationships existing among living organisms and their abiotic (physical and chemical) and biotic (living) environments and themselves. The abiotic factors in the environment determine the ability of organisms to live and reproduce. The chemical and physical sampling and analyses provide a broad picture of the parameters that define the aquatic environment. Biological investigation of soil can determine the extent of soil function and activity. To address environmental issues and increase land’s productive potential, we must now go beyond erosion control, soil fertility enhancement and management for soil quality.

Introduction

Carbon is an essential building block of life. It has always been transported from one form or ecosystem to another as a basic part of natural processes. Examples include its transport, through soil erosion, into aquatic ecosystems, or the undersea formation of limestone, the chief component of which is carbon. Much of the world’s carbon is held in soils, including agricultural soils. Another significant carbon pool is in the atmosphere, as carbon dioxide. Ever since agriculture began, between 7,000 and 10,000 years ago, the balance between these two pools has been changing. The loss of soil carbon through soil disturbance has augmented the atmospheric carbon pool. Since about 1750, the burning of fossil fuels has accelerated the process. Carbon dioxide is the largest single agent of climate change.

Climate change is a major issue facing society today with extensive studies being undertaken to find ways to mitigate its effects and impacts in the future. A key factor contributing to climate change is excessive levels of greenhouse gases in the atmosphere and global efforts are focussed on both reducing the emissions of greenhouse gases and increasing the storage (sequestration) of atmospheric carbon.