eChapters

Water Scarcity Issues
The world is running out of clean water. The subsurface water table decreases and surface runoff rises as a result of deforestation. The amount of water stored underground is decreasing as wells are being dug deeper and deeper. As a result of desertification and deforestation, perennial rivers are turning seasonal. There is not enough potable drinking water because of abuse and overuse.
Conserving Water
• In certain situations, manipulating plants, harvesting water, and other techniques might increase the availability of water supplies.
• Water use reduction achieved by the application of water efficiency or conservation techniques; alternatively,
• Better techniques for managing water can either decrease or increase the useful use of water.
• Any activity, behavioral modification, tool, technology, or better design or procedure used to lower water loss, waste, or use is referred to as a water conservation method.
• One method of conserving water is water efficiency.
Among the Objectives of Water Conservation Initiatives
• The goal of sustainability is to guarantee that water extracted from an ecosystem will not be lost faster than it naturally replaces itself for future generations.
• The pumping, delivering, and treating of water results in energy conservation.
• Habitat conservation includes limiting the amount of water used by humans, which lessens the need to construct new dams and other water diversion infrastructure while also preserving freshwater habitats for nearby species and migratory waterflow.

Mites are economically important pests of agricultural and horticultural crops whose development and population dynamics are strongly influenced by environmental conditions. Rising temperatures, drought, reduced humidity and altered rainfall can accelerate mite reproduction, shorten generation time and increase infestation severity. Climate change may expand the geographical range of damaging species, alter host suitability and disturb interactions with predatory mites and other natural enemies. Increased pesticide use following outbreaks may further disrupt biological control and encourage resistance. This chapter examines climate-related changes in mite biology, distribution and pest status and presents adaptive management strategies involving surveillance, resistant cultivars, biological control and integrated pest-management practices.

Congestion/ Hyperemia

Hyperemia is increased amount of blood in circulatory system. It is of two types, active and passive. In active hyperemia blood accumulates in arteries while in passive hyperemia the amount of blood increases in veins (Figs. 3.1. to 3.4).

Etiology

• As a result of inflammation.

• Obstruction of blood vessels.

Macroscopic features

• Organ becomes dark red/cyanotic.

• Size of organ increases.

Introduction

The tropical evergreen forests of the Sahyadris or the Malnad region of Karnataka is one of the richest plant areas (“hot spots”) on earth and crucial to the oxygen supply of the world. More than 30,000 varieties of wildlife and plants and over 8,000 said to unique are reported to lie here. Unless reckless deforestation is halted soon, some scientists fear that within the next 100 years this virgin forest could become an arid wilderness.

Agriculture is one of the major age-old occupations of human beings providing food to the people and also supplies raw materials to a number of agro based industries. However the expansion of agricultural fields in the dense woody forest areas has brought about many environmental problems and thereby degraded the quality of environment in ecologically most sensitive areas like Uttar Kannada District. In India, agricultural practices are primarily based on the traditional system of intensive subsistence forming. It is also observed that more and more available area (forest) has been brought under cultivations to feed the population which has been growing at an alarming rate. The agricultural expansion and population growth, in forest areas of Uttar Kannada Districts have degraded the quality of environment.

History of PCR

A 1971 Kleppe and co-workers first described a method using an enzymatic assay to replicate a short DNA template with primers in vitro. However, this early manifestation of the basic PCR principle did not receive much attention, and the invention of the polymerase chain reaction in 1983 is generally credited to Kary Mullis.

At the core of the PCR method is the use of a suitable DNA polymerase able to withstand the high temperatures of >90°C (>195°F) required for separation of the two DNA strands in the DNA double helix after each replication cycle. The DNA polymerases initially employed for in vitro experiments presaging PCR were unable to withstand these high temperatures. So the early procedures for DNA replication were very inefficient, time consuming, and required large amounts of DNA polymerase and continual handling throughout the process.

The discovery in 1976 of Taq polymerase (a DNA polymerase purified from the thermophilic bacterium, Thermus aquaticus, which naturally occurs in hot (50 to 80 °C (120 to 175 °F) environments) paved the way for dramatic improvements of the PCR method. The DNA polymerase isolated from T. aquaticus is stable at high temperatures remaining active even after DNA denaturation, thus obviating the need to add new DNA polymerase after each cycle. This allowed an automated thermocycler-based process for DNA amplification.

Developed the PCR in 1984 by Kary Mullis, PCR is now a common and often indispensable technique used in medical and biological research labs for a variety of applications. These include DNA cloning for sequencing, DNA-based phylogeny, or functional analysis of genes; the diagnosis of hereditary diseases; the identification of genetic fingerprints (used in forensic sciences and paternity testing); and the detection and diagnosis of infectious diseases. In 1993 Mullis was awarded the Nobel Prize in Chemistry for his work on PCR.

5.1. Aonla

• Fruit of this deciduous tree found mainly in India.

• Aonla is rich in natural vitamin C.

• Aonla has cooling, diuretic and laxative properties.

• It helps in cleansing the mouth, and strengthens teeth and bones.

• It increases the red blood cell count and helps to promote good health.

• It also has an antioxidant properties.

• The dried aonla fruit is useful in the treatment of hemorrhage, diarrhoea, and dysentery.

• Aonla has laxative properties and therefore, useful in the treatment of constipation and piles.

• It also has antibacterial properties and helps in preventing infections and healing ulcers.

• It also helps in preventing skin infections.

• Aonla has cell rejuvenating properties and therefore, used in maintaining good health of skin and hair.

• Aonla helps to keep the hair glossy and shining.

12.1 Introduction

Performance of an orchard mostly depends on the availability and quality of land and water resources and their management in fruit production. Before taking a decision on all the other possible alternatives under consideration, it is important to undertake feasibility study of the available resources to the orchard management. Other conditions in the growing environment, such as climate and weather conditions, disease and pest management and other factors affecting crop growth also affect production. With ever increasing population in India, today the major problem confronted in fruit cultivation is to improve or at least sustain the production to meet ever increasing demand for fresh or processed fruits. Fruit production can vary widely in response to management of available resources. India cannot afford to mismanage its natural resources (Sharma, 2012). Therefore, judicious utilization of available resources should be done. The following resource constraints are required to be judiciously handled in the management of fruit orchards:

1. Land and Soil management
2. Irrigation water management
3. Solar radiation management

Introduction

Dr. C.L. Fortescue presented a paper in 1918 in which he proved that a system of several vectors or quantities may be resolved into equal different symmetrical groups or systems.

The method of symmetrical components is a general one applicable to any polyphase system.

Because of the widespread use of 3-phase systems and the greater familiarity which electrical engineers have with them, symmetrical component equations will be developed for three phases.

In the Analysis of Unsymmetrical Faults, the following assumptions will be made:

1. The generated emf system is of positive sequence only.

2. No current flows in the network other than due to fault i.e. load currents are neglected.

3. The impedance of the fault is zero.

4. Phase R shall be taken as the reference phase.

INTRODUCTION

Digital libraries are a set of electronic resources and associated technical capabilities for creating, searching, and using Information; they are an extension and enhancement of information storage and retrieval systems that manipulate digital data in any medium. The content of digital libraries includes data and metadata. Digital libraries are constructed, Collected, and organized by a community of users and their functional capabilities support the information needs and uses of that community.

A digital library is a library in which collections are stored in digital formats and accessible by computers. The digital content may be stored locally, or accessed remotely via computer networks. A digital library is a type of information retrieval system. Man is a communicator of information, not simply a user of tools. The history of civilization is the history of improved means of communication. Man always desires to improve the means of communicating. Documents are the artifacts of recorded knowledge that is information. Documents are meant for communication knowledge to larger audiences. Libraries have stored and served the documents to the users.

Thus, libraries have performed as one of the links between generators of information and its users. The developments of libraries from print paper based libraries to digital libraries seem an illustration of man’s never-ending desire to improve his means of communication. In the digital world highway, there is stress on three factors (a) Awareness of information: it provides breadth of vision (b) awareness of technology: gives the power to make the visions manifest, and (c) awareness of needs facilitates the insight to use professional skills and talents to greater effect.

Introduction

Indian subcontinent has a rich and varied heritage of bioresources, encompassing a wide spectrum of habitats from tropical rain forests to alpine vegetation and from temperate forests to coastal wetlands. It is one of the eight centres of origin and one of the 12 mega centres of the world. It possess 11.9 % of world flora and about 33% of the country’s recorded flora are endemic to the region and are concentrated mainly in the North-East, Western Ghats, North-West Himalayas and the Andaman and Nicobar Islands. Of the 49,219 higher plant species, 5,725 are endemic and belong to 141 genera under 47 families. Of theses 3,500 are found in the Himalayas and adjoining regions and 1,600 in the Western Ghats alone. India has 26 recognized endemic centres that are homeland

Natural farming systems aim to reduce dependence on expensive commercial feeds by integrating locally available, non-conventional feed
resources and crop residues. These materials are not only cost-effective and environmentally friendly but also help bridge fodder shortages during lean seasons while recycling agricultural waste.
Non-conventional feeds encompass a wide array of agricultural byproducts, including oilseed cakes from neem, mahua, and karanja; legume
haulms; discarded fruits and vegetables; kitchen waste; and various agroindustrial residues. These resources are often rich in proteins, fibers, and minerals, and when used judiciously, can effectively supplement conventional fodder.
Crop residues such as wheat straw, paddy straw, maize stalks, sugarcane tops, and groundnut haulms are commonly used as dry roughage for ruminants in India. While these are generally low in protein, their fiber content is significant and can be enhanced through simple treatments like chopping, soaking, or fermenting with natural inputs such as Jeevamrit or urea to improve digestibility.
Integrating these alternative feed resources supports the principles of circular agriculture by reducing environmental waste, cutting down on feed expenses, and improving the sustainability of livestock systems. Nonetheless, appropriate care must be taken to avoid incorporating harmful or poorly digestible substances, and nutritional supplementation may be required to ensure optimal animal health.

Intelligent irrigation requires systems capable of responding dynamically to crop, soil and environmental conditions. This chapter explores fusion-driven reinforcement learning for precision irrigation, with particular attention to rice alternate wetting and drying and drip farming systems. It introduces the overall framework and methodology used to combine information from different sources for irrigation decision-making. Kalman filter fusion is considered for integrating relevant data, while reinforcement learning provides an adaptive environment in which irrigation strategies can be optimized. The chapter presents results and discussions associated with the proposed approach and considers its potential contribution to efficient water management. Future research directions focus on improving intelligent irrigation systems and their agricultural applicability.

The integration of Internet of Things technologies with artificial intelligence is creating increasingly connected and data-driven agricultural systems. This chapter examines how IoT and AI can support smart farming through continuous data collection, analysis and decision-making. It discusses technological infrastructure for advanced agriculture and improvements in field operations enabled by connected sensors and intelligent systems. Applications in precision farming, including orchard and vineyard management, are considered alongside emerging technologies and high-throughput phenotyping. IoT devices can provide information about environmental and crop conditions, while AI methods transform these data into useful management insights. The chapter concludes by examining future directions and research challenges associated with integrated smart farming systems.

Cole crops are a group of vegetables belonging to the family Brassicaceae (Syn: Cruciferae) and include cabbage, cauliflower, knoll khol, kale, Brussel sprouts, sprouting broccoli, etc. Cole crops are found spread all over Europe from the Mediterranean region, which is supposed to be the centre of origin. In the ancient Egyptian and Asian civilization, there was mention of cole crops and also by Aristotle in his writings on ‘Enquiry into plants’ there was mention about three types of coles. It is believed that it was first collected for food at the beginning of Neolithic times before being cultivated, and the cultivated forms of cabbage group like, cabbage, savoy, kales, collard, broccoli, Brussels sprouts, cauliflower and kohlrabi gradually originated from wild species through mutation, human selection and adaptation.

Among the cole crops in India cauliflower and cabbage are the two most important crops while Kohlrabi is grown very less. In India it is cultivated in states of Uttar Pradesh, Karnataka, Maharashtra, Bihar, West Bengal, Punjab and Haryana. It is also grown in milder climates in southern India like Ooty, Bangalore, etc.

3.1. Cabbage (Brassica oleracea L.f. alba)

Cabbage, Brassica oleracea Linne (Capitata Group) is a popular vegetable belonging to the family Brassicaceae (or Cruciferae) and is used as a leafy green vegetable. It is in the same genus as the turnip – Brassica rapa. Cabbage leaves often have a delicate, powdery, waxy coating called bloom. The occasionally sharp or bitter taste of cabbage is due to glucosinolate(s). Cabbages are also a good source of riboflavin.

In India cabbage is widely grown in the states of Uttar Pradesh, Orissa, Bihar, Assam, West Bengal, Maharashtra and Karnataka.

Cultivars/Varieties: Cabbage cultivars are classified on the basis of colour of head and maturity. In India white cabbage is important and these are available in pointed, round and flat shapes. Of these round cabbages are preferred. Common cabbage varieties grown are Golden Acre, Pride of India, Copenhagen Market, Red Acre, Pusa Drum Head, Pride of India, Pusa Agethi, Pusa Muktha, KGMR-1, Kateri, Hardam and Nakshatra.

In Solanaceae family there are 85 genera, which includes both tuberiferous and non-tuberiferous plants. Among the non-tuberiferous, tomato, brinjal and chilli are the important fruit vegetables.

4.1. Tomato (Lycopersicon esculentum Mill.)

Tomato has originated in Peru and Mexican region of South America. It got its name form the azetc work “Tomatl”. In India tomato is the second largest cultivated vegetable after potato. Though it is produced in almost entire country, the major producer states are Andhra Pradesh, Karnataka, Orissa, West Bengal, Bihar, Gujarat, Madhya Pradesh and Maharashtra.

Cultivar/Varieties: A large number of varieties/hybrids of tomatoes are under cultivation. The most popular among them are Arka Rakshak, Arka Samrat, Arka Saurabh, Arka Vikash, ARTH 3, ARTH 4, Avinash 2, BSS 90, CO3, HS 101, HS 102, HS 110. Hisar Anmol, Hisar Arun, Hisar Lalima, Hisar Lalit, Krishna, KS 2, Matri, MTH 6, NA 601, Naveen, Pusa 120, Punjab Chhuhara, Pant Bahar, Pusa Divya, Pusa Early Dwarf, Pusa Hybrid 1, Pusa Hybrid 2, Pusa Hybrid 4, Pusa Ruby, Pusa Sheetal, Pusa Uphar, Rajni, Rashmi, Ratna and Rupali.

Uses

Tomato adds richness to any dish it is added. Besides using for culinary purpose tomato is also used as salad and dressings and also as adjuvant in several locally available fresh snacks. It is used for thickening of gravies in many Indian curries. As a processed product tomato sauce and ketchup are on top of favourites. It is not only delicious in taste but also rich in its medicinal value. The pulp and juice are mild aperient, a promoter of gastric secretion and blood purifier. It is also considered to be intestinal antiseptic. It is said to be useful in sour mouth, canker of mouth and chronic dyspepsia.

INTRODUCTION

For centuries, social and technological changes have been affecting every profession. During the last two decades rapid technological development has affected library services as well. Specifically for the last five years, Web 2.0 technologies have significant impact on the higher education sector as well on the libraries all over world. Tim O’Reilly invented the term Web 2.0 in 2004

Groundwater exists at many places beneath the surface of the earth. It is normally hidden from view but, on occasion, can be seen flowing from springs and wells or seeping into tunnels. Certain properties of the various geologic materials control the ability of groundwater to enter into, move through, be stored in, or be extracted from the ground. Therefore, an understanding of geology is necessary in order to gain an understanding of groundwater found within a particular area of investigation. A basic part of the study of the geology of an area includes the preparation of a map showing surfacial exposures of each rock type. Interpretation of the map facilitates the study of the underground configuration, characteristics, and physical properties of these materials. This, in turn, enables the evaluation of groundwater storage, movement, and yield, as well as the identification of areas of ground water quality problems, recharge, and extraction.

The fundamental unit of a geologic study is the geologic formation. A formation has been defined as any assemblage of rocks, which have some character in common, whether of origin, age, or composition. In this sense, the term “rock” is defined as any naturally occurring part of the earth’s crust, made up of aggregate of minerals and includes hard, dense granite, lava ash, clay, sand, and even loose-uncohesive soil.

Application of the principal of geomorphology provides information, which will be of value in predicating the geometry of aquifers. On weathering and erosion, many geological formations develop landforms that are distinctive in respect of slope continuity of outcrops and symmetry of valley flanks. The surface topographic features of bedrocks can some times be extrapolated to reasonable depths to predict the thickness of alluvium or aeolian sands occurring as valley fill deposits, by treating slope profile as mathematical curves for which equations similar to regression equations can be found (Doornkamp and King, 1971).

The influence of tectonic movements and resultant structural features on landform is of paramount importance for hydrogeomorphologists. The control of structure on landforms and hydrogeological processes are being discussed here. The structural geology concerns with the features such as uniclinal or inclined beds, folds, faults and joints. Of these the structural features like faults, fractures, joints etc appear as linear feature.

Linear features on the surface of the earth have attracted the attention of geologists for over one hundred years. This interest has grown most rapidly since the introduction of aerial photographs into geological studies. Geologists have recently proven that various structural features perceived in remotely sensed images are reliable indicators of geologic resources (Caran et al, 1982). These structures have been used in many applications: petroleum and mineral exploration (Blanchet, 1957); nuclear energy facility siting (Seay, 1979); geothermal assessments (Woodruff et al, 1982); and water resource investigations (Lattman and Parizek, 1964). Lattman and Parizek (1964) established a relationship between the occurrence of groundwater and fracture traces for carbonate aquifers, and in particular zones of localized weathering and increased permeability and porosity underlying these structures.

Cold plasma technology represents an innovative non-thermal approach for improving food safety while minimizing undesirable changes associated with conventional heat treatments. This chapter introduces the fundamental principles of cold plasma and explains how reactive species generated during plasma treatment can contribute to microbial inactivation and food decontamination. It examines major plasma-generation methods, including dielectric barrier discharge, corona discharge and microwave plasma systems. The chapter highlights the potential of cold plasma for preserving nutritional and sensory characteristics while reducing microbial hazards. It also considers technological challenges such as treatment uniformity, interactions between plasma and food matrices and the need for process optimization and regulatory validation for wider industrial adoption.

Certification and adherence to quality standards are essential for ensuring the authenticity, safety, and marketability of natural bee products such as honey, beeswax, propolis, royal jelly, and pollen. These standards are especially important in the expanding natural and organic product sectors, where consumer trust and product integrity are critical. Certification validates that bee products are produced using specific methods aligned with natural or organic farming principles—free from synthetic chemicals, pesticides, and artificial additives.

Certified natural bee products often command higher prices and gain access to premium domestic and international markets. Key quality parameters include moisture content, sugar composition, absence of adulterants, pesticide residues, and microbiological safety. Regulatory authorities such as the Food Safety and Standards Authority of India (FSSAI) conduct assessments and enforce compliance with these criteria. For instance, honey is evaluated for HMF levels, diastase activity, and pollen count, while beeswax and propolis are tested for chemical contaminants.

Certification not only promotes sustainable and ethical beekeeping practices but also supports biodiversity conservation and traceable trade systems. Consumers benefit through guaranteed product safety and health advantages, while producers gain market credibility and economic incentives. However, small-scale beekeepers often face obstacles such as high certification costs and complex documentation. Supportive measures like training, capacity-building, and technological innovations— such as blockchain for traceability—can help expand certification accessibility and improve transparency throughout the value chain.