eChapters

Fish culture is an age old tradition modified and improved by several scientific inventions. Farmers can easily take up fish culture in village ponds, tanks or any water body and can improve their financial position substantially. Pond aquaculture is the most common method of fish culture throughout the world. For successful aquaculture of fish, molluscs, crustacean and even aquatic plants, the water and soil in which fish are grown should have favourable conditions for their growth which, in turn, is intimately linked with several physical, chemical, biological characteristics of water and management practices adopted. Physical and chemical characters of the soil and water will affect the primary and secondary production of water bodies.

The survival and production of fish in a pond is dependent on the primary and secondary production. Primary production depends on the water quality parameters. Phytoplankton make carbohydrate using sunlight and releases oxygen. This is the major source of energy and oxygen in the ecosystem. Zooplankton which feed on the phytoplankton form major source of food for the fishes.

Background

In simple term, what agriculture is to land aquaculture is to water and can be defined as the art, science, and business of cultivating plants and animals in water. Considering scope of inland aquaculture in the present discussion would be limited mostly to grow desirable fish/prawn (hence forth termed as fish) in fresh water ponds and to some extent to their seed production in hatcheries. The important activities in aquaculture includes deliberate interventions during the rearing process or life cycle of the stock, management of the culture system and production process so as to increase survival and production of stock. Since, the main goal of aquaculture is to maximize the fish production per unit land/water resources per unit time which primarily depends on the degree of management and intervention. The important forms of intervention and management practices are regular stocking, fertilization, feeding, liming etc. The degree of care taken or effort put in these aspects would determine the level of production.

Availability of quality fish seed is the critical and basic input for successful fish culture operations. Till the sixties, a major part of the seed required for culture was being collected from the riverine sources, which had several disadvantages. Indian major carps viz. Catla, Rohu & Mrigal and Chinese carps viz. Silver carp & Grass carp mature in the pond but do not spawn or lay eggs in standing waters. Usually they breed or spawn naturally in flowing rivers during monsoon months. In artificial breeding, certain inducing agent (hormone) is injected to fish for successful spawning.

In India, the first successful induced breeding of carp was achieved through use of pituitary hormone in 1957. Increased seed production of fish today is a direct result of improved technologies of breeding, hatching and rearing.

Three decades ago, earthen “pit” hatcheries were used for hatching eggs around bunds. Today large commercial hatcheries exist, where all activities such as raising of brood stock, breeding and fry rearing can be undertaken. This has certainly marked the growth of the industry. Commercial Chinese hatchery facilitates not only large-scale production of fish seeds but also improves the survival percentage of seed.

Introduction

Packing and transportation forms an important component in fish trade whether live fish, fish seed, fresh fish, iced fish or dried fish. There are few reasons necessitating packing and transportation.

    ·    The movement of fry/juvenile for stocking into farms or restocking into natural environment.
    ·    The movements of fish to markets for sale selling/consumption.
    ·    The movements of ornamental aquarium live fish for trade.
    ·    The movement of aquatic animals for research purpose.

The aquaculture sector showed an overwhelming growth of 468% during the last two decades and is presently playing a key role in the changing Indian economic growth. The contribution from aquaculture is 21.6% by volume and 49.3% by value to the total fisheries exports. Inland fisheries sector had shown consistent growth of over 5% per annum over the period of 1999-2005. High demand of aquaculture products in the world has forced the aquaculturist to change the culture system from extensive to intensive. This has led aquaculturist to lose millions of dollars due to fish mortalities associated with fish disease and related conditions. Out break of disease has been considered as a major stumbling block in intensive aquaculture practices.

Disease is a very complex interaction between three important factors, namely the susceptible fish, the disease causing agents (pathogen) and the environment. These three factors are most important and must be considered in any fish disease outbreak. The environment in which the causative agent of diseases and their host fish interacts, may favour one or the other. Changes in the environment, whether natural or artificial, may shift the balance from one side to the other and will often determine whether the host will survive or succumb. Understanding and managing the stress and their causative factors are thus the key factors for successful aquaculture.

Introduction

Pearls have been favourite jewel of humanbeing since ancient times. Pearl is a natural gem and is produced by living organisms, the pearl oysters and mussels (Molluscs), unlike other precious stones. It is perhaps, the only gem that does not require the treatment by lapidary. According to our Indian system of gemmology, of the nine maharatnas (Heera, Mukta, Manikya, Pravala/Munga, Gomeda, Indra-neela, Vaidurya, Pushyaraga, and Panna) pearl (Mukta) is only next to diamond (Heera). The science of pearl culture has not been widely popular, however, the art and trade form has reached the zenith.

With the turn of the last century, the demand for pearls increased, but their supplies from the existing fishing grounds have diminished due to overexploitation and pollution. Such a situation necessitated tremendous research attention in the following decades with support from state and trade sectors, the world over. This led to the evolution of culture pearl technology as a booming aquaculture enterprise in Japan and China. These two countries have a monopolistic control over pearl trade.

Introduction

Aquaculture has been shown to offer high potential to fill the gap between supply and demand for fish and fish products to mitigate the problems of malnutrition with ever increasing world population. Globally, aquaculture has been growing rapidly in the last decade, approximately at 10-15% per year. The total aquaculture production, which was 26.7 million metric tonnes in 1996 increased to 37.5 million metric tonnes in 2001, in which tropical countries have been particularly contributing well, with the Asian component exceeding 80% (Ayyappan and Jayanthi, 2004).

The country has varied and enormous aquatic resources (coastline: 8041kms, EEZ: 2.02 million sq. km., river & canals: 171334 km., brackish water area: 1.422 million ha., reservoirs: 2.050 million ha., ponds: 2.855 million ha., beels & oxbow lakes: 0.788 million ha) (Gopakumar, 2000). The North-Eastern region of India is endowed with rich diversity of aquatic and biotic resources, which needs judicious and scientific exploitation for diversification of farm practices so as to mitigate the problem of demand and supply of quality food.

The North Eastern Region of India possesses unique potential for fishery activities. The region represents all agro-climatic zones ranging from warm water drainage system to cold water conditions facilitating freshwater fishing and is identified as the hot spot of freshwater biodiversity. So far about 267 fish species have been reported to be present in the region, which is approximately 33.13% of the total Indian fresh water fishes (Munilkumar and Nandeesha, 2007). The total land coverage of the region is 2.55 lakh sq. km. which is about 7.76% of the country, out of which 70% is hilly terrain (Mahanta and Tyagi, 2003). The main fishery resources of the region comprises of rivers (18,968 km), reservoirs (8,019 ha), beels/lakes (1,48,491 ha) and tanks and ponds (42,782 ha) (Ghosh and Ponniah, 2008).

The North Eastern Region of India with its large fish eating population, needs planned sustainable development of its existing as well as potential fishery resources. A challenging environment for fisheries development prevails in the region by way of very high demand and price of fish. Given the socio-economic conditions and vast fishery resources of the region, there is a strong chance for diversion of work force to productive sectors like fisheries thus transforming the economy of the region and further socio-economic development.

The concern for nature and the focuss for all things which are basic and natural has been spearheading to a green movement of everything natural and nature-based consumer products all over the world. God has given diseases and remidies also in the nature only we have to properly find out. In today’s world of consumer boom, the role of essential oils has increased many folds. Uptil now known applications of essential oils, more and more areas are opening up which will benefit the industry. Use of essential oils in therapeutics is becoming popular in India, China, Japan and European countries. Aromatherapy involves the use of essential oils and aromatics derived from plants to cure diseases. These plants are known as aromatic plants. Aromatic plants possess odorous volatile substances which occur as essential oil, gum exudate, balsam and oleoresin in one or more parts, namely, root, wood, bark, stem, foliage, flower and fruit. The characteristic aroma is due to a variety of complex chemical compounds. The term essential oil is concomitant to fragrance or perfumes because these fragrances are oily in nature and they represent the essence or the active constituents of the plants. They are called volatile or ethereal oils as they evaporate when exposed to air at ordinary temperatures. Essential oils are highly concentrated, low volume, high value products.

Plant oils are obtained from their plant hosts through a variety of processes commonly called Extraction process. Essential oils are extracted from different parts of the plants. The quality and quantity of the oil is mainly depends on the method of extraction and the quantity of the raw materials used. For example, Lavender is extracted from its flowers, Orange from the rind of its fruit, Frankincense from the resin of its tree, Cinnamon from its bark, Pine from its needles, clove from flower buds and so on. Production of a good quality essential oil, the cultivation factors also play a vital role like soil quality, climatic and geographic conditions etc. As example, Jasmine flowers must be picked by hand at dawn on the very first day they open. A Sandalwood tree must be 30 years old and 30 feet high before it is ready to produce its best quality oil. Further the quantity of the plant materials are also matters for the price and quality of the essential oil. As an example, it takes roughly 12,000 Rose blossoms to produce 5 ml of Rose. Whereas it take 100 kilos of Lavender leaves to produce 3 liters of Lavender. As a result Rose is roughly 24 times more expensive than Lavender.

A concentrated, hydrophobic liquid containing volatile aroma compounds obtained from aromatic plants is referred to as essential oil. It is so-called to indicate that the oil is the fragrant essence of the plant from which it is extracted generally through various distillation methods. The economics working behind essential oils has three components. First, the cultivation of herbs and plants used to extract essential oils; second, the actual process of extraction of the oils; and, third, the marketing and actual sale of these oils. But the major emphasis is often given to the agrotechnology, since the crop yield and yield of the essential oil depends on the quality of cultivation. The cost of cultivation of herbs in the developing countries per hectare is estimated at US $ 600 to 1100. This cost mainly comprises labour cost and as such this industry is uniquely suitable only for developing nations. The revenue from essential oils after the extraction per hectare is estimated to be around US $ 2500 to US $ 6500. According to industry sources, more than 3,500 essential oils are known. Out of these, some 400 are used for commercial purposes on a regular basis. These are obtained mostly from agricultural plants, some from wild plants that may be seasonal or perennial. Oil can be extracted from any part of plants—from leaves, flowers, fruits, roots etc. Whatever the source of essential oils, they have complex compositions, containing alcohol, aldehydes, ketones, phenols, esters, ethers and turpenes in varying proportions.

Agarwood Oil

Biological Source : Wood of Aquilaria agalloch, Aquilaria crassna, A. Khasiana.
Family : Thymelaeaceae
Common names : Agarwood, Aloeswood, Eaglewood, Gaharu or Oudh.

Plant Introduction : Aquilaria is a fast-growing, archaic tropical forest tree, which occurs in South and Southeast Asia, from the foothills of the Himalayas to the rainforests of Papua New Guinea. Agarwood is a fast growing, evergreen tree, that normally grows to 18 - 21 m but sometimes up to 40 m in height. It bears sweetly-scented, snow-white flowers. The trees occasionally become infected with a parasite mould and begin to produce an aromatic resin in response to this attack. As the fungus grows, the tree produces a very rich, dark resin within the heartwood. The tree grows in natural forests at an altitude of a few meters above sea level to about 1000 meters, and it grows best around 500 meters. It can grow on a wide range of soils, including poor sandy soil. Seedlings need a lot of shade and water. Trees grow very fast, and start producing flowers and seeds as early as four years old.

Medicinal and aromatic plants have been known for millennia and are rich source of therapeutic and cosmetic agents for the prevention of health diseases and critical skin ailments. India is the rich source for the medicinal and aromatic plants and export many plant parts for the research work to the many countries as raw materials. The major market in the world for essential oils is the United States, followed by Japan and Europe. However, production continues to be concentrated in Europe, with seven of the world’s largest essential oil processing firms. In the United States, the major users of essential oils are the soft drink companies. Japan accounts for 10 % of the world demand. The Canadian market is domi­nated by the United States perfume and flavouring industry. France is dominating the world perfumery market, and Switzerland is one of the leaders in the pharma-ceutical field. Britain and India are known to feature strongly in the flavouring sector. The essential oil industry is characterised by a number of difficulties, including lack of stable quality, inconsistent supplies, and variability of active ingredients owing to environmental effects. Even though according to World Health Organization, herbal medicines are lucrative globally and represent a steady high market value in every year.

Introduction

The history of Integrated Pest Control goes back much farther than the mere coining of the term in the early fifties and the subsequent elaboration and clarification of the concept. The origins are deeply rooted in the evolution of pest control practices as developed by Entomologists and Plant Pathologists in the Nineteenth Century.

Human history is a series of attempts to gain increasing control over the environment. At first this control was minimal to the degree that poor shelter and unstable food supplies imposed severe population constraints. The gradual gain in man’s capacity to control his environment parallels the gradual rise of civilization. But as man aggregated into villages near rivers and planted crops near by, he encountered increasingly severe attacks by pests on the crops. For thousands of years, man could do nothing about these pests but appeal to the power of magic and a variety of gods. For the most part, early humans had to live with and tolerate the ravages of plant diseases and insects, but gradually they learned how to improve their conditions through “trial and error” experiences. These improvements included the beginnings of pest control or pest management, the most preferred term today.

INTRODUCTION

Management of several of the important insect-pests of crops is becoming increasingly difficult owing to a number of factors by which pests have been able to offset the effect of control interventions. Several of the present day pest management problems may be ascribed to the excessive and indiscriminate use of chemical pesticides during the last about three decades. Routine application of insecticides for controlling insect-pests, without taking into consideration whether economic damage to the crops is being inflicted by the pest or not, has resulted into several problems like pest resistance, pest resurgence, pest replacement, killing of natural enemies of pests, presence of toxic residues in food, and soil and environmental pollution, etc., apart from increase in the cost of plant protection. Entomologists have been trying to find solution to these problems through integrated pest management of which monitoring of insect activity through regular surveys is an important component. In fact, knowledge of insect activity is indispensable since pest management system can not operate without accurate estimates of pests and natural enemies population or without reliable assessment of plant damage and its effect on yield.

Introduction

Humans have inhabited the earth for nearly 2 million years. For over 90 per cent of this period, the maximum population numbered about 200,000 and the growth rate was only about 0.01 percent per year. The use of fire and the development of tools were the first major changes affecting human population growth which increased to about 5 million individuals about 100,000 years ago. The population remained fluctuating about this mean value for the next 90,000 years depending upon the food supply. Up to this time people were hunterer-gatherers and depended exclusively on the natural ecosystem for their food. Then about 10,000 years ago, humans began to cultivate crops for food. With established agriculture came an increased and stable food supply. This contributed to an increased growth rate of the human population (Dhaliwal et al., 1998).

INTRODUCTION

The first significant economic contribution of host plant resistance in agriculture was made in 1890 when European grape vines were successfully grafted on resistant root stock to save the French Wine industry from viteus vilifaliac (Fitch). Studies from the past century have led to the development of resistant varieties in about 15 crops to about 50 key insect pests. During the last 20 years alone, more than 500 insect resistant cultivars of rice, maize, cotton, sorghum, alfalfa and wheat have been developed and released world wide (Dhaliwal and Arora, 2001). The insect resistant varieties are grown on millions of ha. annually and help the farmers to save billions of dollars in insecticide costs (Dhaliwal and Arora, 2001). The role of Host Plant Resistance in Integrated Pest Management is discussed below.

Introduction

Advent of agriculture in India dates back to around 2000 BC, the period of Indus Valley Civilization. South and East Asia also witnessed the start of agriculture around the same time. The crops were grown only during the monsoons. Winters served as a closed period for crops as well as for the pests. Even at that time a number of insect pests were known to cause serious damage to different crops. Agriculture has been revolutionized during the few decades since World War II (Kupatt et al., 2005). Introduction of high yielding varieties and associated technology resulted in tremendous increase in the production from the same piece of land. The results of these changes include a dramatic reduction in time and resources needed to provide an unprecedented quantity of quality food and fiber. The initial introduction of plant protection agents as wonder material did not lasted long, as very soon their ill effects on human health and environment were witnessed.

INTRODUCTION
 
In India tremendous progress has been made in agriculture. In absence of check on population growth, it may cross 1.5 billions by 2030. As a consequence per capita availability of land 0.13 ha will further reduce to 0.1 hectare in 2020 A.D. The demand of growing population for food and fibre require country to produce higher yields from presently cultivated land. Currently an average of 2790 calories of food available each day for every human on the planet, (23 per cent more than in 1961 and enough to feed every one). The production targets and required yield to feed the ever increasing current population with present available resources will require the growth rate of 2.35 and 2.2 per cent in rice and wheat, respectively and as high as 4.45 and 3.38 per cent for pulses and oil seeds, respectively. This requires national average yield to be increased by 30-50 per cent, which is not a cakewalk. India will require producing additional 5-6 million tones annually to keep pace with ever-increasing national food and nutritional requirements. Recurrent famines, starvation death and lack of resources led to green revolution, which as of now has turned our begging bowl to agriculturally advanced cereal exporting country.

INTRODUCTION

While the world has been changing during the last few years both politically and economically in unexpected and remarkable way, food security remains an unfulfilled dream of billions of people. With the world population crossing six billion marks, the demand for food grains is increasing at an alarming rate. Increasing population, on the other hand, has led to decrease in cropping area. In order to meet the global food demand we have to increase the productivity. Insects have always been a major cause of yield-loss in agriculture. They account for 20-30% of crop-loss. Several approaches e.g. physical, chemical and biological have been used with varying degree of success to reduce such losses.
 
The insect pest management is one of the most important yield destabilizing factors in almost all the crops. While for some insects, genetic sources of resistance are available in the respective plant germplasm, for many others germplasm is almost devoid of effective resistance genes. It is because of this factor that conventional breeding strategies have not been successful in breeding insect pest’s resistant varieties. The only means available at present for managing the insect is extensive application of insecticides and pesticides. Excessive usage of the pesticides causes, on one hand, environmental pollution and on the other, it forces the insects to develop resistance against these chemicals. Application of the pesticides also imposes additional economic burden on the farmers.

Introduction

Pesticide in broad term refers to “killer of pests” but is an agent used to control, prevent, destroy, repel and mitigate a pest. Pesticides are thus poisonous substances intentionally applied in situations, which harbour so-called pests. Agriculture including poultry and veterinary (i.e. raising of crops and protection of produce and storage), health (public places-hospitals, restaurants, gardens cinema halls etc.), transportation (shipment, air rail and road transport) are some areas where pesticides are used extensively as spot application, fumigation, aerial and field sprays, soil treatments etc. Plant protection comes to be recognized as an equally important factor of agriculture production as improved seeds, fertilizers and irrigation. Pesticides over time get accumulated in the environment and contaminate all systems i.e. air, water, soil, plants, animals and micro-organisms on being transported from one system to another leading to biomagnifications.

The fate of a pesticide in the environment and the entities, which come in contact, is depicted in the Fig. 1 reflecting the pollution and contamination. Pesticides during manufacturing, transportation, storage and actual use enter the biotic and abiotic components of the environment through air, water and soil and disturb the cohesion causing great disaster sometimes. Pollution is defined as undesirable change in physical, chemical and biological characteristics of air, land and water. This change may or will harmfully affect human life or that of desirable species, industrial process, living conditions and cultural assets. It may or will waste or deteriorate our raw material resources. Pollution increases burden of human society causing loss of resources through unnecessary wasteful exploitation, the cost of pollution abatement and deterioration of human health.

Introduction

The world of living organisms essentially consists of the kingdoms of plants and animals. Myriads of organisms representing these two, interact among them, ranging from symbiosis and mutualism to competition and predator-prey interactions. The last mentioned process is one the important components of ecological dynamics, that determine the balance of nature or equilibrium among the biota. To this category belong the predators, parasites (parasitoids), pathogens, and so on, all of which live at the cost of another organism, without affording any benefit to the ‘victim’, hence the victim is termed the ‘prey’. In an agroecosystem, when an organism, explodes into an unusually high number, devouring cultivated plants it often becomes a ‘pest’ from a man’s point of view. Sometimes the pest can be a human nuisance too. It is here, that the role of predators and parasitoids become relevant as biological agents against the pests.
 
A lion, which preys on herb-feeding antelopes, is also a predator. But, its roles become restricted to maintaining the balance of the antelope population. Left undeterred, antelopes can explode to levels that can threaten grasslands. Here lions play a very crucial role in maintaining (through hunting antelopes) the equilibrium of the grasslands, just sufficient for these plants to surge with every rain. Otherwise, the grasslands potentially may get denuded by the antelopes, or conversely it may override other ecosystems. This is part of the ‘food web’ and is found in every ecosystems; desert, aquatic, mountains, forests, agro-ecosystems, etc.

INTRODUCTION

“An insect is like an old-fashion soldier: it does what it is ordered to do, and when it has no orders it does nothing” (a citation from Wright, 1963). The orders are very often given as chemical signals that induce certain behaviour or change the course of development in the insect. Chemical communication appears to be the primary mode of information transfer in insects. These chemicals are able to modify the behaviour of a perceiving organism at sub-micro/nanogram levels and are known as semiochemicals. The term is derived from the Greek Word Simeone, meaning a mark of a signal. These behaviour modifying chemicals are divided into two broad categories.

Introduction

Although the concept of IPM, with emphasis on minimum use of pesticides; is well established and widely practiced in India pest population still continue to be unabated, often reaching to alarming levels. Out breaks of Spodoptera litura and hairy caterpillar, Amsacta moorei have been recorded in soybean and kharif crops recently during 2002 & 2004 in Madhya Pradesh and Rajasthan, respectively. Outbreaks of Helicoverpa armigera populations are well known, appearing more frequently since past few years (1987-88, 1995-96, 1997-98 & 2001) doing extensive damage in cotton and pulses. in many parts of the country. Failures in controlling these populations, even by most potent insecticides, have raised a serious doubt on the success of present day pest management practices aimed to kill the pest in immature larval / egg stage, when infestation spreads out in large areas. Insecticidal treatments require wide coverage of crop area to control them effectively. Insecticide resistance in pest species and destruction of natural enemies are obvious problems, since chemicals are applied indiscriminately to entire crop ecosystem including the non-target beneficial bicontrol species. How to minimize use of insecticide in pest control is often a question of major concern to the entomologists.

INTRODUCTION

Insecticide resistance poses a severe threat to agricultural productivity in India and in other countries of the world. Humans have had the ingenuity to develop thousands of pesticides to protect foodstuffs, livestock, and health and the use of these poisons has triggered a rapid evolutionary response in many target species and some nontarget species of invertebrates, microorganisms, higher plants and vertebrates. Insecticide exposure led to nullify their toxic effects through genetic selection for individuals with the biochemistry or behaviour. Continual development of new compounds and its greater use and increase in input insecticide cost is mainly due increase in resistance. Reduction in insecticide efficacy from insect resistance has major economic, environmental and human health implications. Integrated Pest Management (IPM) is a convenient descriptor for wide range of still-evaluating pest control program that emerged from chemical prophylaxis practiced. IPM theory has fostered a transition from primarily chemical control to programs tempered with biological information and input tailored to each agro ecosystem, crop and pest situation in production.

Introduction

The introduction of high yielding varieties and hybrids in late sixties led to accumulation of insect pest problems in cereals. The varieties and hybrids developed during green revolution era with the sole objective to enhance production to feed increasing population were better in quality parameters than traditional locals but were highly susceptible to insect pests. Over 200 pests attack different cereals and insects that were not known or were of minor importance have now become major pests and several new insect pests have appeared on cereals. Out breaks are frequent due to several obvious reasons. Major pests are serious, perennially occurring and persistent species which cause considerable loss in yields every year in large areas require control measures. Occasional pests attack the crops sporadically but cause potential damage and sufficient loss, though in some localities or only in some seasons, so as to warrant human intervention.

Introduction

Rice is the staple food of about 50% of the world’s population that resides in Asia, where 90 % of the world’s rice is grown and consumed. In the International year of Rice celebrated in 2004 the theme was “Rice is life” which reflects the importance of rice as a primary food source of human beings. In the world, annually rice is cultivated in about 151.54 million hectares with an annual production of 593 metric tonnes and average productivity of 3.91 tonnes/ha (Rai, 2004). From its Asian homeland, it is now cultivated in 113 countries and plays a variety of roles related to important aspects of food security as well as rural and economic development. In Asia this crop is grown in 136.07 million ha followed by 7.67 million ha in Africa and 5.09 million ha in Latin America with a production of 539.84, 16.97 and 19.54 metric tonnes and productivity of 2.97, 2.21 and 2.84 tonnes, respectively (Rai, 2004). In India, rice is the staple food for more than 65 % people (Pasalu and Katti, 2004). Rice is grown under various geographical, climatic and cultural conditions. The current level of rice production in the country is around 90 million tonnes. Based on the present rate of population growth @ 1.5 % and per capita consumption of 250 g of rice/day in the country, the demand for rice production is expected to be about 100-105 million tonnes by 2010 and 130-140 million tonnes by 2025. To achieve this target, it requires increasing productivity per unit area by the adoption of modern and intensive agricultural practices, such as use of high yielding varieties and improved cultural and management practices. Experience of post green revolution period in last four decades indicates that these practices often aggravate other biotic constraints such as insects, diseases and weeds. However, insect pests are considered to be the major limiting factor in enhancing the productivity of rice.

INTRODUCTION

Cotton is an important commercial crop and plays a key role in the economy of country. Cotton is grown in different states of India viz Punjab, Haryana, Rajasthan, Gujrat, Maharashtra, Madhya Pradesh, Andhra Pradesh, Karnataka and Tamil Nadu. In India the area under cotton crop is 8.76 m ha and the productivity is 436 Kg lint/ha as against the world average of 682 kg lint/ha (Anonymous, 2005). The productivity of cotton is variable in the country in the range of 287 to 720 kg lint/ha (Anonymous, 2005). The major constraints in cotton cultivation in India are as follows
 
MAJOR CONSTRAINTS IN COTTON CULTIVATION IN INDIA
    i.    Abnormal weather conditions 
    ii.    Cultivation of cotton under rainfed condition 
    iii.    Cultivation of large number of susceptible and undescript cultivars with varied growth pattern. 
    iv.    Poor soil health
    v.    Long duration of crop 
    vi.    Long sowing period 
    vii.    Indeterminate nature of cotton plant 
    viii.    Intensive cultivation 
    ix.    Imbalance use of fertilizers 
    x.    Non judicious use of irrigation water 
    xi.    Higher incidence of insect pests due to 

INTORDUCTION

Spices are strongly flavored aromatic substances of plant origin which are commonly used for seasoning, cooking food and for preserving other food stuffs. There are about 70 species of spices grown in various parts of the world. Those which are used most commonly throughout the world are grown in India and other parts of South Asia.

The seed spices are annual herbs, whose dried fruits or seeds are mostly used as spices. The seed spices are used for culinary, confectionary, perfumery, cosmetics and pharmaceuticals industry. There are about 20 seed spices grown in India (Table 1) and nine out of them are prominent. The most important among them are belongs to family Apiaceae (coriander, cumin, fennel etc). about 9 lakh ha area is growing in seed spices in the country with annual production of about 5-6 lakh tones (Anonymous, 2003). India is the world’s largest producer, consumer and exporter of seed spices. The foreign exchange earned through export of seed spices is more than Rs 200 crores annually. India exports raw spices as well as value added items to nearly 70 countries in the world and is meeting 51% of the global demand of these commodities. There is good potential for increasing export of seed spices, if production as well as quality is increased. The level of productivity in various seed spices is comparatively low as compared to other countries. There are many production constrains attributed to low productivity. The lake of suitable high yielding varieties suiting to different agro-ecological regions and more incidences of diseases and insect pests. Among different insect pests, coriander aphid, Hydaphis coriandari (Das) is one of the most destructive and widely distributed pest of coriander (Jain, 1984 and Jain and Yadav, 1989). Recently brown wheat mite was observed attacking coriander and other spices (Jain and Yadav, 1986 and 1989).

Introduction

In India, climatic conditions are very diverse and fruit crops of temperate, sub-tropical and tropical regions are grown. Frequently, the fruit crops of one regional environmental requirement are grown in another region. This type of crop husbandry has some typical pest problems as the insect and mite pests have easy access to any of these regions depending upon the fruit crop. The application of management approaches in isolation of insect pests on fruit crops demand a unified strategy to suppress the different pest populations under the concept of ‘crop management’. Thus, to sustain the crop management for the better fruit quality, a judicious integration of safe chemical/biopesticide molecules must be used with other non-chemical approaches namely host plant resistance, bioagents, cultural and mechanical practices etc.

Introduction

India ranks second in the production of vegetables after China. The existing area under vegetable cultivation in India is around 4.5 million ha. There is a need of around 5-6 million tons of food to feed 1.3 billion India’s population by 2020 AD. The major constraint in vegetable production, include the extensive crop losses due to increased pest infestations directly or due to viral diseases vectored by insects. The extent of crop losses in vegetables varies with the plant type, location, damage potential of the pest involved and cropping season. Vegetables are more prone to insect pests and diseases mainly due to their succulence as compared to other crops. The crop losses to the tune of 40 per cent have been observed in vegetable crops. The increased demand and limited productivity of local cultivars, led to introduction of high yielding varieties and hybrids. As a result, dramatic changes in pest scenario occurred like minor pests assuming major status (eg., Serpentine leaf miner, Liriomyza trifolii a serious problem in tomato hybrids). Chemical pesticides are the sole panacea to mange the pest by vegetable farmers even today. Indiscriminate use of pesticides has led to severe ecological consequences like destruction of natural enemy fauna, effect on non-target organisms, pesticide residues in vegetables and resistance of the pest to pesticides. The modern pest management is aimed at educating the farmers on various issues of pest management like identification of the pests, natural enemies, judicious use of pesticides with alternate methods of pest control like cultural, mechanical, biological and behavioral (pheromones) management.

INTRODUCTION

Potato is a crop of major significance in human nutrition, ranking fourth in world production, after wheat, maize and rice. Potatoes are grown on over 44 million acres in more than 125 countries, with annual production of about 250 million tons. Potatoes are grown across India, with production concentrated in several areas of the North Indian plains and West Bengal. Indian potato production is significant and accounts for 8.5 per cent of the world total (Dahiya et al., 1999).

The potato has hundreds of recognized pests including many insects, mites, nematodes and rodents. Some of these were transported to new locations alongwith seed tubers. Others were already present in locations where the potato was introduced and then proliferated on this new host plant. Because a potato crop is vegetatively propagated from tubers, which easily carry some pathogens and pests, many pest problems have followed potatoes to areas wherever they are grown. The potato tuber moth was introduced accidentally into India from Italy in 1906, probably through seed potatoes (Lefroy, 1907), and by the middle of century had become well established throughout India (Kumar and Nirula, 1967). Of all the major food crops, potato is heaviest user of chemical pesticides, which often total up to 20 per cent of its cost of production (Anonymous, 1991).

Introduction

Rapeseed-mustard is attacked by more than 43 insect species. Out of which, mustard aphid, Lipaphis erysimi (Kaltenbach); mustard sawfly, Athalia proxima (Klug); painted bug, Bagrada hilaris (Burnmerister); pea leaf miner, Chromatomyia horticola (Goureau) and Bihar hairy caterpillar, Spilarctia obliqua (Walker) are of major importance. Other pests are of sporadic occurrence. Status of important insect pests attacking rapseed mustard in India have been given in detail by Bakhetia and Arora (1993) and Singh 2005. The occurrence of various insect pests on rapeseed-mustard is stage-specific. This has been a gift provided by nature to help avoid inter-competition among them for their fullest exploitation of the host. The insect pests attacking rapeseed- mustard as given in Table 1 and at various stages of the crop in Table 2.

INTRoDUCTION

In developing countries, cereals and legumes are the principal source of daily energy and protein intake. The major economic loss caused by grain infesting insects in not always the actual material they consume, but also the amount contaminated by them and their excreta which makes food unfit for human consumption. Today million of tones of the food grains are damaged by the ravages of the pests that not only cause quantitative but also qualitative changes in food grains. Stored product insects depress the food value of a product, introduce pathogens, parasites or toxins or make it less palatable. Insect infestation in high in the tropics and may lead 100 per cent damage in severe cases.
 
In order to cope with the requirement of the increasing population and food problem, at present as well as for the decades to come, the world will have to raise agricultural production very substantially, both by increasing the production and by reducing losses on account of post harvest spoilage especially of cereals and legumes which are the primary sources of food for men kind. This is a major problems during agricultural production, food transfer and processing. Million tonnes of grain worth several hundred corers of rupees every years are either damaged or loss for want of knowledge of scientific methods of saving the foodgrains during storage. In India, post-harvest losses caused by the unscientific storage, rodents, insects, micro-organisms, moisture etc. account for about 10 per cent of total foodgrains (Anonymous, 1971). A world survey by F.A.O. indicated about 5 per cent loss of cereals, in storage annually (Herford, 1952).

Introduction

Indiscriminate use of acaricides not only causes the development of resistance in phytophagous mites but are also harmful to their natural enemies, therefore, poses a serious problem of pest resurgence. Hence, worldwide attention has been focused to utilize the natural biocontrol agents and minimize the use of chemical pesticides for the control of mite pests in agriculture with a view to develop a suitable IPM strategy. Among natural enemies of phytophagous mites, predatory mites have been found to be most effective and efficient tool in IPM programme because of the fact that many of these are not only abundantly available in nature but are also voracious feeders and have proven ability to suppress the pest mite population below economic injury level. Beside this, predatory mite can locate, run and catch hold of the pest mites even the pest mite is hiding in rolled leaves, under webs or even in the galls or erinium, etc. Some of the predatory mites require very low population of pest mites as prey, for their survival and multiplication, which is an added advantage for potential predation. Some predatory mites such as Typhlodromus pyri have good synchronization with the prey mite, Panonychus ulmi as, both hibernate and remain active in orchards.

INTRODUCTION

Phytophagous mites have long been considered as potentially serious pests of a wide range of food and fibre crops, and ornamentals. They are covered under subclass Acari of class Arachnida and phylum Arthropoda. Mites unlike insects are 8-legged creatures and lack compound eyes, antennae and wings. Plant feeding mites measure from 200µ to 600µ. Majority of the plant feeding mites belong to suborder Prostigmata, and phytophagous mites belong to family Tetranychidae (spider mites); Eriophyidae (bud or gall mites) ; Tenuipalpidae (false spider mites); Tarsonemidae (broad mites) and Tuckerellidae, in the decreasing order of their importance. Before one can develop integrated management of phytophagous mites in different agri-horticultural ecosystems, knowledge about the following fundamentals of phytophagous mite management principles is a big must.

Introduction

Leafhoppers belong to the family Cicadellidae and constitute one of the largest families in the exopterygotan Hexapoda. Recent estimates of species for the world range between 35,000-45,000 species though little over 22,600 species are now described (Dietrich, 2004a). The leafhoppers belong to the order Hemiptera and suborder Auchenorrhyncha.
 
Leafhoppers can readily be recognized from other members of the Auchenorrhyncha by the presence of two or more rows of spines on hind tibiae and by the pronotum not extending back over abdomen. Their close relative, the Membracidae, have pronotum extending back over the abdomen. From planthoppers (Delphacidae) with which they are often confused, they can be recognized by the position and structure of antennae. The leafhopper antennae are placed between eyes compared to beneath the eyes in planthoppers; the second segment of the antenna (pedicel) is small without externally visible sensillae in leafhoppers compared to enlarged pedicel with prominent sensillae in the planthoppers. The movable large spur at the apex of hind tibia in plant hoppers is absent in the leafhoppers.

Introduction

India is the largest developing economy of the world and about 70 per cent of its population is dependent directly or indirectly on this profession.  To meet the food requirement of the ever-multiplying population of this country, agriculture production has to be maximized by using genetically improved varieties, fertilizers improved implements, seed, and other agronomical technologies. Beside these improvements the agriculture production has remained static for the last decade. For further improvements in agricultural production we have to adopt comprehensive strategies. One of such strategies is the pollination management that is a very vital process of agriculture crop production. Pollination is a process involving reproductive parts of a flower and an external agent in the form of a vector. According to Prof. E.C. Martin, the value of bee pollination of fruits, vegetables and seeds in the United States of America totaled very close to $8 billion in the 1960s; the figure 20 years later is probably close to $20 billion.

Introduction

Many insets inhabit the soil and participate in different activities which will result in changes in soil physico-chemical properties. Thus soil is a very good habitat for some insects. Several insects spend either complete or few stages of their life cycle in soil. Soil provides protection from predators for many soil dwelling insects especially in immature stages. Few insects also undergo diapauses in soil. Soil insects include phytophagous, scavengers, predators and parasites. Among these, soil macro fauna especially termites and white grubs are very important pests of many crops and their activity also brings many changes in soil ecosystem.

Termites

Termites (Order: Isoptera) are eusocial, polymorphic and live in small to large colonies. The colony consists of different castes viz., functional reproductive (queen and king), sterile workers and soldiers, which are morphologically distinct.  The tasks of the latter two castes include foraging, nest building and care of eggs and young ones and defense. All species maintain symbiotic relationships with microorganisms, which aid in digestion. Few species build the often-spectacular mounds or arboreal nests and others build subterranean nests. They constitute important group of soil fauna and play a major role in the arid and semiarid tropics. Worker castes are dominant and are responsible for major functions in the colony. During the process of food collection, the workers generally attack the plants that are weakened due to some internal growth factors or environmental causes such as drought or poor soil conditions (Roonwal, 1978).

    1.    Nutrients : Chemical substances obtained from food and used in the body to provide energy, structural materials, and regulating agents to support growth, maintenance, and repair of the body’s tissues. Nutrients may also reduce the risks of some diseases.
    2.    Carbohydrate, fat, and protein are sometimes called macronutrients because the body requires them in relatively large amounts (many grams daily). In contrast, vitamins and minerals are micronutrients, required only in small amounts (milligrams or micrograms daily).
    3.    The international unit for measuring food energy is the joule, a measure of work energy. To convert kcalories to kilojoules, multiply by 4.2; to convert kilojoules to kcalories, multiply by 0.24.
    4.    Essential nutrients : Nutrients a person must obtain from food because the body cannot make them for itself in sufficient quantity to meet physiological needs; also called indispensable nutrients. About 40 nutrients are currently known to be essential for human beings. Energy-yielding nutrients: the nutrients that break down to yield energy the body can use:

    1.    Absorbance (A) - Defined as –log (1-a) = log (1/t), where ‘a’ is the absorbance and‘t’ the transmittance of a medium through which a light beam passes.

    2.    Absorption coefficient (a) - The relative decrease in the intensity of a collimated beam of electromagnetic radiation, as a result of absorption by a medium, during traversal of an infinitesimal layer of the medium, divided by the length traversed.

    3.    Acceleration due to gravity (g) - The standard value (9.80665 m/s2) of the acceleration experienced by a body in the earth’s gravitational field.

    4.    Acid - Historically, a substance that yields an H+ ion when it dissociates in solution, resulting in a pH< 7. In the Brönsted definition, an acid is a substance that donates a proton in any type of reaction. The most general definition, due to G.N. Lewis, classifies any chemical species capable of accepting an electron pair as an acid.

    5.    Acid dissociation constant (Ka) - The equilibrium constant for the dissociation of an acid HA through the reaction HA + H2O1 A- + H3O+. The quantity pKa = -log Ka is often used to express the acid dissociation constant

    6.    Acyl groups - Groups formed by removing the hydroxy groups from oxoacids that have the general structure RC (=O) (OH) and replacement analogues of such acyl groups.

    7.    Adiabatic process - A thermodynamic process in which no heat enters or leaves the system.

Percent Solutions

There are three types of percent solutions. All are parts of solute per 100 total parts of solution. Based on the following definitions you may calculate the concentration of a solution or calculate how to make up a specific concentration

    1.    % W/W - Percent of weight of solute in the total weight of the solution. Percent here is the number of grams of solute in 100 grams of solution. 
        Example: 
        A 100% (W/W) NaCl solution is made by weighing 100 g NaCl and dissolving in 100 g of solution

    2.    % W/V - Percent of weight of solution in the total volume of solution. Percent here is the number of grams of solute in 100 ml of solution. This is probably the least significant way of naming a solution, but the most common way of doing it. In fact, any percent solution not stipulated as W/W, W/V, or V/V is assumed to be % W/V. 
        Example : A 4% (W/V) NaCl solution is 4 g of NaCl in 100 ml of solution.

    3.    % V/V - Percent of volume of solute in the total volume of solution %V/V. Percent here is the number of milliliters of solute in 100 ml of solution. 
        Example: A 10% (V/V) ethanol solution is 10 ml of ethanol in 100 ml of solution; unless otherwise stated, water is the solvent. 

Physical Chemistry of Foods

    1.    Thermodynamics is primarily concerned with energy and entropy. Energy, also called internal energy (U), comprises heat and work; it is measured in joules (J).

    2.    Energy may be recalled that work generally equals force times distance (in N_·m = J) and that force equals mass times acceleration (in kg ·m· s^-2 = N).

    3.    According to the first law of thermodynamics, the quantity of energy, i.e., heat (q) work (p) potential energy, is always preserved.

    4.    Entropy (S)  is a measure of disorder; it is given by   
        S = K_B ln Ω
        Where K_B is the Boltzmann constant (1.38 ×10^-23 J × K^-1) and W is the number of  ways in which the system can be arranged, also called the number of degrees of freedom.

    5.    Colligative solution properties : The lowering of the chemical potential of a solvent by the presence of a solute causes changes in a number of physical properties: vapor pressure, boiling point, freezing point, osmotic pressure, etc. (the magnitudes of these changes all are proportional to the mole fraction of solute).

1. Guidelines on Analytical Terminology

    1.    Accuracy : The closeness of agreement between a test result or measurement result and a reference value.

    2.    Analyte : The chemical substance sought or determined in a sample. This definition does not apply to molecular biological analytical methods.

    3.    Applicability : The analytes, matrices, and concentrations for which a method of analysis may be used satisfactorily.

    4.    Bias : The difference between the expectation of the test result or measurement result and the true value. In practice conventional quantity value can be substituted for true value.

    5.    The bias of a measuring instrument is normally estimated by averaging the error of indication over the appropriate number of repeated measurements. The error of indication is the: “indication of a measuring instrument minus a true value of the corresponding input quantity”.

    6.    Calibration : Operation that, under specified conditions, in a first step, establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and in a second step uses this information to establish a relation for obtaining a measurement result from an indication.

    7.    Certified reference material (CRM) : Reference material accompanied by documentation issued by an authoritative body and providing one or more specified property values with associated uncertainties and traceability, using valid procedures.

Instrumentation and Advanced Analytical Techniques

    1.    Chromatography is defined as an analytical technique where by a mixture of chemicals may be separated by virtue of their differential affinities for two immiscible phases. One of these, the stationary phase, consists of a fixed bed of small particles with a large surface area, while the other, the mobile phase or “eluant”, is a fluid that moves constantly through, or over the surface of, the fixed phase.

    2.    The chromatogram evaluated qualitatively by determining the Rf or retention factor, for each of the eluted substances.

    3.    The Rf is a measure of that fraction of its total elution time that any compound spends in the mobile phase.

    4.    If the liquid phase is a polar substance (e.g. polyethylene glycol) and the mobile phase is non polar, the process is termed normal-phase chromatography

    5.    When the stationary phase is non polar (e.g. octadecylsilane) and the mobile phase is polar, the process is reversed-phase chromatography

    6.    The chromatographic separation of mixtures of large molecules such as proteins may be accomplished by a mechanism called size exclusion chromatography or gel permeation chromatography.

    7.    Separation of certain molecules is accomplished by a mechanism called affinity Chromatography in which specific binding between an antibody (stationary phase) and antigen (analyte) occur.

Introduction

    1.    Food Science is the application of the physical, biological and behavioral science to the processing and marketing of foods (Margaret, 1968).

    2.    Technology can be defined as the science dealing with knowledge of doing things efficiently and effectively.

    3.    Food science helps us understand the theory example: what methods can best be used to store and preserve food to maintain quality and prevent spoilage.

    4.    Food technology demonstrates how the food is stored, preserved, processed and transported and has been responsible for development of new techniques for processing and preservation of food on a commercial scale and for packaging it in such a way that it can be sold conveniently.

    5.    Food science deals with the study of facts of the physical, chemical and biological sciences as they influence the processing and preservation of food.

    6.    Food technology deals with engineering and other scientific and technical problems involved in transforming edible raw materials and other ingredients into safe, nutritious and appetizing food products (Desrosier, 1977).

    7.    Food science is concerned with basic scientific facts about food, where as food technology concerned with the processing of raw materials into foods that meet human needs and wants.

    8.    Indian agriculture has undergone a sea change during the past half a century. Starting with the campaign for “grow more foods” in the forties, India reached self sufficiency during the eighties.

Moisture Content
 
Two maximum moisture levels are provided to meet different climatic conditions and marketing practices. Lower values in the first column are suggested for countries with tropical climates or when long-term (more than one crop year) storage is a normal commercial practice. The values in the second column are suggested for more moderate climates or when other short term storage is the normal commercial practice.

Cereal Processing

    1.    The protein content of wheat grain varies widely, but for bread making a value of at least 11% is required.

    2.    Low grain sulphur will result in low concentrations of the sulphur-containing amino acids, cystine and methionine, and may result in poor loaf volume.

    3.    During seed germination endosperm starch is converted into soluble glucose and maltose to support the developing embryo. This is brought about by enzymatic activity, especially the enzyme a-amylase.

    4.    Excessive a-amylase levels result in the formation of a darkened loaf crust as a result of sugar caramelization and a sticky crumb structure which can cause problems during slicing.

    5.    Wheat with a protein level below 10% is preferred to reduce gluten elasticity.

    6.    There is a very good correlation between grain nitrogen and the amount of malt extract achieved, low grain nitrogen giving more fermentable extract

    7.    The term ‘coarse grains milling’ is a very broad one that refers to the comminution of the berries of the wheat, barley and other coarse grain crops.

Meat and Meat Products

    1.    Meat can be defined as “the muscle tissue of slaughter animals”.
    2.    meat is composed of water, fat, protein, minerals and a small proportion of carbohydrate

    1.    The heifer is bred (naturally or by insemination) before the age of two years.

    2.    The gestation period is nine months and one week.

    3.    After calving, the cow gives milk for 10 months.

    4.    1 – 2 months after calving the cow will again be bred.

    5.    The cow then continues to give milk for about 300 days. This period is known as lactation.

    6.    Milk should preferably be handled in a closed system, to minimise the risk of contamination. It must be cooled to 4 °C as soon as it is produced.

    7.    The content of protein, lactose and ash is somewhat higher in buffalo milk than in cow milk. Buffalo milk contains vitamin A, but lacks b-carotene, which is present in cow’s milk.

    8.    When milk and cream turn to butter, there is a phase inversion from an oil-in-water emulsion to a water-in-oil emulsion.

    9.    In milk, the whey proteins are in colloidal solution and the casein in colloidal suspension.