eChapters

Introduction

Human civilization used to undergo several form of disasters throughout its life history. Most of such events are unpredictable, sudden and short in duration, and such events can easily classifiable as either natural (e.g. cyclones, earth quake, natural forest fires and tsunami) or manmade such as spread of toxic chemicals (e.g. Bhopal disaster 1984), nuclear explosions, civil war, diseases (Minamata, itaiitai, etc.). However, climate change is a real time prolonged disaster which is caused by both natural (caused by variation in solar irradiance, variations in orbital parameters of earth, volcanic activities, natural forest fire, methane release from thawing of permafrost from ocean floor, natural wetlands and cattle) and anthropogenic means (by greenhouse gases resulted from human activities-all kinds of combustion, industrial production of greenhouse gases and agricultural water lodging activities such as paddy cultivation and artificial wet lands, and deforestation).

Multipurpose trees and shrubs are defined as all woody perennials that are purposefully grown to provide more than one significant contribution to the production and/or service functions of a land-use system that they occupy. In agroforestry systems, different species of trees and shrubs can be planted with many types of crops in a variety of patterns. Thus, it is required to know about the methods of propagation and nursery raising, planting and other silvicultural management practices along with the diverse uses of multipurpose trees and shrubs of tropical and subtropical areas before their selection for forestry and agroforestry activities. It is important to select the most suitable tree species since it is not easy to replace them once they have been planted.

MANGIUM (Acacia mangium)

Acacia mangium is a single-stemmed evergreen tree that grows to 25-35 m in height and up to 60 cm in diameter. The bole is usually straight, often fluted near the base, free of branches for up to half its height. Mangium is native to Australia, Indonesia and Papua New Guinea. However, it tolerates varied site conditions and has adaptability to different planting objectives. Mangium shows most vigorous growth on well-drained, fertile soils in high rainfall areas in the humid tropics. It is valued for its rapid growth and has been planted throughout the humid tropics and is a major plantation species in the Asia Pacific. Provenances from Papua New Guinea consistently show better growth in height and diameter.

Milk may be concentrated as a necessary initial step in drying operation or as concentrating step in the manufacture of sweetened condensed milk or evaporated milk or the preparation of infant formulae. In order to preserve the milk constituents in a concentrated form, condensed milk/concentrated milk is manufactured from whole skim milk by removing or evaporating part of the water under vacuum. But this form of milk still has limited shelf life. Attempts to prolong the shelf life of this product have been made through the addition of bacterial growth inhibitor like sugar (sweetened condensed milk) or by heat processing (evaporated milk) to destroy the microorganisms.

Concentrated milk industry is an important segment of dairy industry. It plays an important role in the economy of industry. It serves as a balanced economy. It utilizes surplus milk in the flush season. It utilizes abundant milk production in certain localized area. It makes use of surplus milk below excellent grade. By either concentrating or drying less space is needed to store and it becomes less bulky and therefore it can be transported to any part of the world. The keeping quality of milk is increased. The concentrated products give considerable saving in the cost of packaging, storage and transportation. Milk concentrates can be easily reconstituted with required amount of water corresponding to that removed by evaporation to yield a product having normal consistency of milk. It is estimated that nearly two per cent of the world’s milk production is converted into different types of condensed or concentrated milks.

Brief history and developments: The present day concept of preservation of milk by concentration and by application of heat had the beginning with the pioneering work of French man Nicholas Appert around 1793. Gail Bordon of USA was first to commercially exploit the method of concentration of milk under vacuum. He was awarded U.S. Patent in the year 1856 for processing milk in a semi-fluid state after evaporating under vacuum. Commercial production of sweetened condensed milk by Gail Bordon started in 1856.

Citrus is the world’s leading tree fruit crop, comprising of mandarins, sweet oranges, grape fruit, limes and lemons. It is one of the most important fruit crops grown under varying agroclimatic conditions in India except in the high hilly temperature regions. Mandarin orange (Citrus reticulata) is the most important commercial citrus in India followed by sweet oranges and acid limes. Citrus fruits are not only delicious and refreshing but also they provide vitamins, minerals and other substances. Different species of Citrus have different chemical composition. In sweet oranges, principal constituents of edible portions are sugars (glucose + sucrose) and acids (primarily citric acid and a little of malic acid), the fruits of acid groups contain primarily acids in fruit juice. Rind of citrus fruits is rich in pectin and contains essential oils and glucosides (hesperidin, naringin). Citrus fruits are a good source of vitamin C (ascorbic acid - 25 to 85 mg/100 ml juice), besides vitamin B, A and D. World-wide demand of orange is as fresh fruits, but orange marmalade is an important product and is one of the main uses of sour and sweet oranges. Grape fruit and mandarins are also taken as fresh fruits. Citrus fruit can be utilized in a number of other ways as salads, juices, squashes, cocktails, syrup, concentrates and pickles. Peel of thick-rinded fruits can also be made to delicious candy. Lemon is used in many culinary purposes. Grape fruit is utilized in preparation of wines and brandies and also for flavour and in perfumery.

The method to preserve foods in sealed glass bottles by heat in boiling water was developed by one among the following scientist?

a) Edward Jenner (1798) b) Francois Nicolas Appert (1804)

c) Lazzaro spallanzani (1765) d) None of the above

Introduction
Aquaculture is rapidly outpacing all other sectors in agricultural development. The study of fish genetics gained traction in the 20th century, driven by advancements in the understanding of Inheritance and reproduction. During the 1960s, selective breeding programmes aimed at enhancing genetic qualities became more common (Gjedrem and Baranski, 2009). Currently, more than 60 fish and shellfish species are going through selective breeding (Gjedrem and Baranski, 2009). Despite this, many critical traits like resistance to disease, efficiency of feed conversion, fatty acid composition and quality of meat are challenging to assess in breeding prospects but significantly impact the yield and profitability of several aquaculture species. Genetic mapping refers to the process of creating a genetic map (Van Ooijen and Jansen, 2013). Making genetic linkage maps is still essential for carrying out genetic and genomic research and many aquaculture species have had such maps developed. Developments in genotyping and sequencing technologies have made it the creation of higher-density, high-resolution (HR) genetic linkage maps. However, there are now important tasks in linkage analysis due to the usage of a large number of molecular markers. High-density linkage maps are valuable tools for studying genomic biology and evolutionary genetics because they serve as the foundation for QTL (quantitative trait loci) mapping. They facilitate the quantification of recombination rates, linkage disequilibrium levels, and chromosomal rearrangements across chromosomes, between sexes, and among different populations. The development of marker-Assisted Selection (MAS) has gained significant consideration and has significantly accelerated genetic breeding efforts in numerous cultured aquatic organism (Li, 2019; Yu, 2019). Quantitative trait loci (QTL) linked to economically important variables are frequently mapped using genetic linkage maps, which are an invaluable tool for examining genomic regions. (Huang, 2020; Wan 2017; Zhou, 2021). Growth rate, flesh quality, and disease resistance are only a few of the important features that are regulated by several genes or loci. The use of genetic maps in QTL (quantitative trait loci) mapping is essential for determining the locations of genes linked to these traits. (Huang, 2020; Li, 2019; Wan, 2017; Wang, 2018). The mapping of trait-related quantitative trait loci has been greatly improved by recent developments in high-throughput next generation sequencing techniques (You, 2020). Research in this field has greatly advanced through the use of a variety of techniques, including restriction site-associated DNA sequencing (RAD-seq), genotyping-by-sequencing, specific-locus amplified fragment sequencing, and genome-wide association studies (GWAS). Of these, RAD-seq is thought to be an appropriate, robust, and economical approach that has demonstrated 172 Aquaculture Genetics: Breeding, Conservation, and Sustainable Production efficacy in detecting genotypes and single nucleotide polymorphisms (SNPs) (Andrews, 2016). Linkage mapping in aquaculture is a valuable tool that has revolutionized selective breeding. By revealing the genetic foundations of key traits, it allows for more efficient and sustainable aquaculture practices. The integration of linkage mapping with other genomic technologies is expected to enhance productivity, improve disease management, and ensure the long term sustainable growth of aquaculture industries worldwide.

1. INTRODUCTION

In the past, conventional ICTs that have been applied to agricultural extension services include the use of television, radio, etc., and these media have been criticized as archetypical, passive, top-down in nature; hence they have not created meaningful impact on agricultural information delivery (Akpabio, 2007). As a result of this, extension roles have undergone several transformation, over the years. One of the objectives of agricultural extension is to create conducive platform for empowerment so that food security can be guaranteed. In order to guarantee food security there is need to utilize faster and more efficient techniques of project identification, selection, implementation and evaluation in the agricultural extension process (Braimoh and Oladele, 2000). The inadequacies of interpersonal communication strategy in development gave credence to the use of media support in development process (Yahaya, 2000). In recent times, further improvements have been made on the use of media support through digital media. This is what makes contemporary ICT more relevant.

Modern ICTs emerged in Nigeria at a time when there was need for change in the agricultural extension delivery system to suit the contemporary situation. The conventional forms of communication used by extension agents include written (bulletin, leaflets, newspapers, articles, personal letters, circular, etc.); spoken (general meeting, special meeting, farm and home visit, official calls, telephone calls and radio); visual (result demonstration, exhibits, posters, motion pictures, charts, slide) and spoken/visual (method demonstration meeting, result demonstration meeting, meeting involving motion pictures, meeting involving charts).Torimiro et al.,(2000) noted the non-usage of telephone calls in extension work, giving reasons as preference for the locally accessible and affordable forms of communication they can employ.

1.1 Historical background of the Embryology

Embryology is a branch of Anatomy. It is the study of growth and differentiation undergone by an organism in the course of its development from a single fertilized egg cell into a highly complex and independent living being like its parents. It explains how one develops before he is born. Important changes also take place after birth and continue to occur even to adult stage. eg: Replacement of RbC and WbC is a continuous developmental process and reverting to activities seen in prenatal condition is seen in healing of wounds. So the term ‘Developmental Anatomy’ which includes prenatal and postnatal development is preferred over term embryology as Developmental Anatomy, includes prenatal and postnatal development and as the term embryology refers truly prenatal (Intra uterine) development.

Aristotle (384-332/322 BC) proposed two theories regarding origin of life

Abstract: Lilium is one of the six major genera of flower bulbs produced worldwide. Species are native to diverse habitat within Northern hemisphere. Liliums have a lengthy association with various world cultures. As a result, flower breeders have created numerous genotypes during the millennia of breeding this crop which has enabled its establishment in the top ten cuts, potted flowering and garden crops worldwide. The crop arises from multiple species. Research has focused on development of late flowering genotypes with forcing ability, improvement of flower form/ shape, pollenless cultivars, disease resistance and floral longevity. The limited genetic information and trait heritability have been established for this crop. Wide crosses are routinely used to create new genetic variability. Breeders have created complex hybrids such as LA, OT, OTO, FA, FAA, FO and OA hybrids through in vitro embryo rescue techniques. Molecular biology is being used to engineer Lilium against LSV and TBV. Crop ideotypes prescribe numerous traits for incorporation by flower breeders and geneticists including short forcing time, late flowering in Asiatic lilies, enhanced shelf life, genetically controlled height, rapid propagation and cultivars requiring no vernalization for flowering.

Mango (Mangifera indica Linn.) (Family-Anacardiaceae) is one of the most popular tropical and sub-tropical fruit crops in India and is well known as the “King of Fruits”. Mango is the national fruit of India and Pakistan as well as national tree of Bangladesh. It is cultivated worldwide in 49.46 lakh hectares with a production of 371.20 lakh tonnes. In India, the crop is cultivated in the largest area of 23.12 lakh hectares among all the countries in the world and production is around 150.30 lakh tonnes, contributing 40.48% of the total world production. India exports 59.22 thousand tonnes of mangoes to 40 different countries worldwide, valuing Rs. 162.92 crores (Anonymous, 2019).

10.1 Introduction

Edible oil production is a separate sector of the food processing industry. There are several species of plants in the world whose oil can be utilized for human consumption for edible and non-edible uses. Though around 40 oilseeds are known, only around a dozen oilseed crops have become commercially important including ten seed crops and three tree crops. These oil seed crops (mostly annual) of commercial importance are groundnut, rapeseed-mustard, sesame, soybean, sunflower, cottonseed, safflower, niger, castor and linseed. The three major tree oil crops are palm, olive and coconut [63]. Besides these, the kernels of some other tree crops i.e. apricot, almond, walnut, hazelnut, olive (fruits are used), peach, can also be utilized for oil extraction purposes for edible and non-edible uses. Besides oil of the oilseed crops, the oils of tree fruits and kernels are also becoming popular very fast for various food, pharmaceutical and cosmetic industries.

Large scale requirement and local shortages of oils for various edible and non-edible uses have prompted the identification of many new sources of oil during the last few decades. They are ricebran, corn, sal, mahua, jatropha, kokum, melia, rubber, mango kernel, kusum, simarouba, neem, karanj, crambe, moringa, tumba, jojoba and tobacco seed etc. Most of these oilseeds and their products have wide utility in the specialty oils sector and are mostly used for non-edible purposes. Soaps and detergents, paint and varnish, lubricants, pesticides and medicines, cosmetics, bio-diesel fuel industry are the major consumers of these non-traditional oilseeds. All the oil crops will gain greater attention in future as they are renewable and biodegradable in nature [63]. List of oil crops have been given in Table 1.

The genetic blueprint contained in the nucleotide sequence can determine the phenotype of an individual. The hereditary units, which are transmitted from one generation to the next generation are called genes. A gene is a fundamental biological unit like atom which is the fundamental physical unit.
Mendel was the first scientist who proposed genes as particulate units and called them hereditary elements or factors. But the concept of gene has undergone a considerable change since Mendel’s time.
Modern Concept of Gene
A gene can be described as a polynucleotide chain, which is a segment of DNA. It is a functional unit controlling a particular trait such as eye colour. Beadle and Tatum concluded by various experiments that gene is a segment of DNA that codes for one enzyme. They proposed one gene-one enzyme hypothesis. But as some genes code for proteins that are not enzymes, the definition of gene was changed to one gene-one protein hypothesis.
Protein Hypothesis
The concept of gene has undergone further changes as the new facts came to light. Since proteins are polypeptide chains of amino acids translated by mRNA, gene was defined as one gene-one polypeptide relationship.
Some proteins have two or more different kinds of polypeptide chains, each with a different amino acid sequence. They are products of different genes. For example, hemoglobin has two kinds of chains a andß chains, which differ in amino acid sequence and length. They are encoded by different genes. Thus, gene is defined as one gene- one polypeptide relationship.

19.1 Introduction

Food safety is one of the important factor for food industry, regulatory agencies and consumers. Nowadays consumers are demanding food which is safe and of high quality in terms of nutrition due to a healthier life style. Food safety refers to all those hazards, that make food injurious to the health of the consumer and it is not negotiable. Food may be contaminated physically, chemically or microbiologically, mainly microbial contamination is of high concern in the food industries. Various pathogenic and spoilage causing microorganisms, viruses, insects can deteriorate the food products and cause food borne illnesses. Therefore, there is a need to eliminate these undesirable microorganisms from the food industries to ensure food safety to the consumer. Various methods are available to eliminate these undesirable microorganisms such as thermal technologies like pasteurization, dehydration, retort processing, freezing etc. and non thermal technologies like microwave heating, Pulsed Electric Field (PEF), High Pressure Processing (HPP), Pulsed Light Technology, Ohmic Heating, Ultra sonics, Pulsed X-Rays. But these technologies have certain disadvantages like thermal technologies lowers the nutritional value and leads to unwanted changes in the foods' sensory attributes of the food products whereas non thermal technologies retain better nutritional and sensory quality of food than thermal technologies but they are cost effective, required specialised equipments and trained personnel. Cold plasma technology (CPT) is a non-thermal green technology used now-a-days for variety of application in various industries especially in food industry. It is proposed to be an alternative method for eliminating microorganism from the fresh produce. This technology does not require extreme process conditions and can be used as a good alternative source for food preservation without affecting its nutritional and sensory attributes. Plasma is an ionized gas, consisting of active species like positively and negatively charged ions, electrons, free radicals, and gas atoms, metastable and quanta of electromagnetic radiation (photons). When the energy source is turned off, active species used to disappear immediately, therefore cold plasma technology is environmental friendly and fulfilling all ecological standards. Based on the properties of plasma, it can be applied in various fields like electronics, life sciences, textile, packaging and food industries. In food industries, it is showing promising application by retaining the nutritional, functional, and sensory characteristics thus ensuring the fresh appearance of the food product and satisfying the consumer need.

Abstract: Petunias, popular bedding plants, with variety of forms, sizes and shapes are employed for landscape planning, garden designs and container gardening. The numerous phenotypes viz., Grandifloras, Multifloras, Millifloras, Waves, Hedgifloras, etc. are complex hybrids. The outstanding marketable series of P. x hybrida have been developed for upright, spreading and semi-trailing to trailing habits. The leaf colour ranges from light to dark green and also variegated types. Flower colours with charming shades and patterns, picotte, star and pronounced venation of darker colours are available on world market. Petunias are strictly cross pollinated and progeny can segregate widely for traits due to heterozygosity. Increasing knowledge of the inheritance of traits and molecular genetics techniques are valuable tools aiding modern breeders. Numerous genes have been identified in the genus with some sequenced genes being used to create transformants with modified plant morphology, floral structure development, floral scent, and flower shelf life. Genes involved in the flavonoid biosynthesis pathway has enabled precision in the creation of flower colours or modification of pigment production and expression. An exploitation of sterility and incompatibility for production of F₁ hybrid seeds is discusses in detail.

Biocompatible, biodegradable, intelligent and responsive materials are currently an emerging area of interest in the field of efficient, safe, and green pesticide formulation. Using nanotechnology to design and prepare targeted pesticides with environmentally responsive controlled release via compound and chemical modifications has also shown great potential in creating novel formulations. Special attention was paid to intelligent pesticides with precise controlled release modes that can respond to micro-ecological environment changes such as light-sensitivity, thermo-sensitivity, humidity sensitivity, soil pH and enzyme activity (Huang et al., 2018).

Introduction

Spice – definition and uses

SPICES are aromatic or pungent vegetable substances, used as whole, broken, or ground form, whose function in food is seasoning rather than nutrition and commonly used as a condiment. It may be a dried seed, fruit, root, rhizome, bark or vegetative substance or flower bud. American Spice Trade Association (ASTA) defines spices as “any dried plant product used primarily for seasoning purposes”. Included are tropical aromatics (pepper, cinnamon, cloves, etc.), leafy herbs (basil, oregano, marjoram, etc.), spice seeds (sesame, poppy, mustard, etc.) and dehydrated vegetables (onions, garlic, etc.). Many spices have other uses like food preservation, medicine, religious rituals, cosmetics, and perfumery or as vegetables.

Key words : Remote Sensing, Ecosystem, Environmental Pollution, Biodiversity Conservation, Coastal Environmental Degradation, Wetland.

Introduction

National prosperity and human resources development are primarily shaped by the availability of natural resources and their use. None the less, the benefits are quite often negated by the resultant environmental degradation concomitant with their utilisation for economic values. The problems of environmental degradation have assumed critical dimensions in many parts of India due to resources exploitation; industrialisation and urbanisation, unchecked population growth and a never ending quest for energy to meet the increasing demands. Moreover, improper utilisation of resources has resulted in such environmental problems as soil erosion, waterlogging, floods, droughts and pollution of various types besides socio-economic disparity among people.

After the 1972 Stockholm conference on Human Environment and Development, there has been a phenomenal increase in the worldwide interest in the environmental issues associated with development. Consequently, the focus of development has shifted to environment friendly and sustainable developmental planning in recent years. The Rio Summit (June 3-14, 1992) further emphasised the fact that earth is an integral and interdependent system, which require sustainable developmental planning. During deliberations of the Rio Summit (Earth Summit), it was emphasised that satellite imagery will be quite helpful in monitoring earth’s environment.

India has a long tradition of environmental protection and has enacted laws during the last three decades to give further impetus to the conservation of natural resources and protection of environment. Some of the important laws are:

Postharvest handling is the stage of crop production immediately following harvest, including cooling, cleaning, sorting and packing. The instant a crop is removed from the ground, or separated from its parent plant, it begins to deteriorate. Postharvest activities include harvesting, handling, storage, processing, packaging, transportation and marketing. Losses of horticultural produce are a major problem in the postharvest chain. The diseases which develop on harvested parts of the plants like seeds, fruits and also on vegetables are the postharvested diseases. The amount or extent of damage depends mainly on the pathogen(s) involved, on the condition of the products and the condition of storage. Major tips to avoid postharvest losses include Tips to avoid postharvest losses include assessing maturity, to check your water quality, to check water temperature, avoid injury, keep the produce cool and proper storage.

“Storage” means the phase of the postharvest system during which the products are kept in such a way as to guarantee food security other than during periods of agricultural production at the marketing level, to balance the supply and demand of agricultural products, thereby stabilizing market prices. Grain, which includes dry kitchen ingredients such as flour, rice, millet, couscous, cornmeal, and so on, can be stored in rigid sealed containers to prevent moisture contamination or insect or rodent infestation. For kitchen use, glass containers are the most traditional method. Maturity indices are the sign or indication the readiness of the commodity for harvest. It is the basis for determining harvest date. Postharvest losses occur between harvest and the moment of human consumption. They include on-farm losses, such as when grain is threshed, winnowed, and dried, as well as losses along the chain during transportation, storage, and processing.

1.1. Introduction

A typical dairy farm consist of different classes of dairy animals like calf, heifer, breeding heifer, pregnant, milch and dry animals and bull. The systems of management for the different classes are not same. They need some routine as well as periodical farm practices, some of which are common for all categories of animals (i.e., identification, dehorning, grooming etc.), while some categories need special farm operations (e.g., castration in males, milking etc.). Also there is need of routine disinfection of animal sheds and farm premises to prevent and control occurrence of diseases and maintaining the animals healthy. Further for proper execution of all these operations there is need of keeping farm records.  Keeping in view the above points, this section deals with some important farm management practices.

7.1 General Description

Shifting cultivation is a type of land use that dates back to the dawn of agriculture. It's done in places where forest resources are still plentiful. It usually refers to the gradual transformation of primary forests into a mosaic of secondary forests at varying stages of growth, rather than the complete abolition of forests. However, primary forest removal occurs gradually in order to preserve the same fallow time despite population development. As no primary forests remain (or as the remaining primary forests are entirely protected by local customs or conservation legislation), secondary forests fade away, and new techniques arise or are adopted, the fallow period shortens. Natural capital is gradually replaced by man-made productive capital, or the system approaches a state of crisis, depending on whether the limitations to these changes can be levered. In theory, the new land uses allow for more forest protection because they require less territory to provide the same output. In practice, they are triggered or triggered by a series of more radical changes, such as infrastructure development, migrations, financial investments, and new consumer habits, all of which frequently end in large-scale deforestation.