eChapters

Abstract

We are very fortunate to be born in a nation which is blessed with awesome decent variety of natural products, fruits, vegetables, cereals, pulses and so forth. The population of India expanded consistentlythat cause a genuine sustenance and shelter problem. The supply of food is not adequate to fulfill the demand of the consumers. This shortage of food is the root for adulteration of foodstuffs by the traders. Food adulteration is a procedure in which the nature of sustenance is brought down either by the addition of inferior quality material or by extraction of valuable ingredient. An adulterant is a chemical substance which should not be contained within other substances (food, beverages) for legal or other reasons. The addition of adulterants is called adulteration. Food is adulterated to increase the quantity and make more profit. The food is sucked of its nutrients and the place where the food is grown is often contaminated. For instance: milkis mixed with water. Vanaspati is utilized as an adulterant for ghee. Adulteration of food is unsafe as it may be toxic and causes serious health hazards to the consumer. To evade this issue government has passed an act which is known as preservation of Food Adulteration Act. It covers security from risks involved due to contamination of poisonous elements. Instead of government efforts the informed and aware consumers will have the capacity to dispense with this issue. So, here in the chapter adulterants their types, effect on human health, laws and control measurement were reviewed and discussed.

Abstract

Consumers increased response to new products with high sensory, organoleptic and nutritional potentials has impelled a search for new substitutes to processing methods. For several years, thermal processing was the main technology for producing safe products with long shelf lives, although in most cases losses of fresh flavors, vitamins, and some physicochemical characteristics were the price of safety and long-term stability. Pulsed electric field (PEF) processing as a non- thermal technique has been proven to inactivate microorganisms with minimal losses of flavor and food quality, possibly making it the answer to present-day consumer demands. In addition, the low processing temperatures used in this non- thermal technology allow the process to be nutrient preserving, energy efficient, which translates into lower costs and fewer environmental impacts. In this chapter, the the configuration of various PEF equipment, their electric configuration and recent application of this technique in processing of foods have been discussed in detail.

Abstract

Ghee means the pure clarified fat derived solely from milk or curd or from desi (cooking) butter or from cream to which no coloring matter or preservative has been added. It is the second largest dairy product prepared from milk and it is almost 35% of total milk production. Unfortunately, the producers or the middle- men involved in the ghee trade, tend to adulterate ghee with cheaper oils and fats like vegetable oils, animal body fats, hydrogenated fats and sometimes even the non-edible mineral oils, especially during lean season to earn more money. Recently, the problem of adulteration has assumed a very serious dimension. Such a situation has tarnished the image of dairy industry. Methods presently adopted by food law enforcing agencies to ensure the quality of ghee are mainly based on the physico- chemical constants, but all these methods have some limitations. So researchers are always in search of different innovative methods to check the quality of ghee.

Abstract

Tremendous hike inworld population has increased thrust on the limited resources which has considerably affected the viability of the food. The emerging challenge for policy makers and food scientists is to put forward viable solutions. Utilization of underutilized crops/plants that act as good sources of starch could be explored in a better way for the sustenance of the limited sources like food crops/plants. The demand for starch and the foods containing starch has been increasing continually. Since, the starch in its native form has certain limitations in its functional properties to be used for different applications. Therefore, it becomes important to explore certain technologies which could be used for modification of starch. Among different technologies gamma irradiation ensures food safety while inducing physicochemical changes of the components. Although, the chemical modifications have been used widely so far but the concerns related to the chemical residues left are diminishing their demand. Hence, the physical processes particularly the gamma irradiation process has emerged as an efficient alternative with some benefits over other process like eco-friendly, economical, reliable and safe for altering the physico-chemical and biological characteristics of the product. Gamma Irradiation of starch has been successfully employed for the achievement of some desired physico-chemical, biological and functional properties of the foods and other related items. In this chapter, valuable impact of gamma irradiation on the physico-chemical, biological and functional properties of starch has been summarized.

Abstracts

To ensure safe food and adequate sanitation programs, the equipment used for processing of food products must be designed, fabricated, constructed, and installed according to sound hygienic design principles. This ensures the equipment can be adequately cleaned and sanitized, and that surfaces are resistant to daily exposure to corrosive food products and cleaning/sanitizing chemicals. This chapter focuses primarily on fundamental principles of hygienic design, which protect the product from microbial, chemical, and foreign-body contamination. This is followed by a discussion of general aspects of hygienic construction and design of food equipments, the selection of materials of construction and specification of surface finishes, fabrication, installation and cleaning and sanitization. Quality of raw materials or foods ingredients, proper processing, packaging and storage of finished products decides the quality of the food products. Planning for plant and equipment layout, its design, services (water, air, refrigeration, steam), waste disposal etc. are some of the critical factors, which contributes to quality. In addition, the food processing equipment must comply with strict standards and regulations, which are necessary for securing the quality and safety of the food products to the consumers.

Abstract

Micronutrient (vitamin and mineral) deficiencies affect more than 2 billion people worldwide and are especially prevalent in developing countries including India. Conditions due to vitamin mineral deficiencies account for 7.3 percent of the global disease burden.Iron deficiency (anemia), vitamin A and iodine deficiency disorders continue to be a grim public health problem. Thus, elimination of vitamin and mineral deficiencies is essential to improve the overall health of the masses as well as to sustain economic growth and national development. Food fortification is an effective intervention to deliver vitamin and mineral rich foods to large populations. In addition to the prevention of vitamin and mineral deficiencies, food fortification is an effective measure to raise vitamin and mineral levels by moving the population towards consuming recommended dietary allowances for most micronutrients-making it a long–term and a sustainable strategy. India is the largest producer of milk in the world with 146.3 million tonnes and the consumption rate of milk and milk products by all age groups of people are high.Therefore, fortification of milk with mineral and vitamins could be a safe and effective strategy to fight these micronutrient deficiencies.

Abstract

Nutrition and genetics both have very crucial role in human health and in development of chronic diseases such as cancer, osteoporosis, diabetes and cardiovascular diseases. Difference between individuals in response to dietary intervention is a well-known phenomenon in nutrition research (Ordovas, 2008).The effect of dietary changes on phenotypes such as blood cholesterol, body weight and blood pressure can differ significantly between individuals (Ordovas et al., 2007). Various bioprocess i.e. ingestion, absorption, digestion, transport, metabolism and excretion of nutrients and food bioactive components in human body is carried out through proteins such as enzymes, receptors, transporters, ion channels and hormones. Genetic variation leads to altered production and affect functional properties of these proteins. Furthermore nutritional efficacy is also different among different individuals which might be affected by nutritional status. Thus diet and gene expression are interrelated and have a mutual effect on physiology of human body.

Abstract

Probiosis has emerged in the early 20^th century after Ellie Metchnikoff proposed his hypothesis that organisms were reponsible for longivity of ethnic people of Balkan region of Russia and ever since it has grow into a major scientific field which has its applications extending into farming, aquaculture and prophylactics in humans. Vast research was carried out on this topic and Lactobacillus sp. and Bifidobacterium sp, are the two important genus that are highly studied and widely recognized universally as conventional probiotics. Apart from these two genus there exists many other bacterial species which have shown promising probiotic potential. Such non conventional probiotics are widely used in some parts of world as commercial food products with health beneficial effects, pharmaceutical products or being tested for their safe utilization in human beings. The present chapter tries to covers some genera and their potential and application in prophylactics.

Abstract

Chitin has been ranked at second position after cellulose as the most abundant natural biopolymer. Chitin has similar chemical structure to that of cellulose with 2-acetamido-2-deoxy-b-d-glucose (NAG) monomers attached via ß (1–>4) linkages. Chitosan is the deacetylated (to varying degrees) form of chitin, which, unlike chitin, is soluble in acidic solutions. Therefore, Chitosan, a copolymer of glucosamine and N-acetyl glucosamine, is amongst the most copious biopolymers on earth and finds wide range of biomedical and industrial applications. It has been approved in 1983 by USDA as a feed additive. Chitin basically is obtained from prawn/crab shells and chemical treatment of chitin produces chitosan. Since supplies of seafood waste are seasonable and variable, so fungi can be used as alternative source for chitosan. The unique physicochemical properties of chitosan provide great potential of its utilization in food industry especially dairy industry such as production of dairy products, dairy waste water treatment, extension of shelf life of dairy products etc. In recent years, exotic synthetic compounds are losing their appeal, thus application of chitinous products in dairy as well as processing aids has received considerable attention. The modified chitosan with greater functional properties has increased application in different dairy foods. This chapter focuses on the fundamental uses of chitosan and their derivatives in a variety of dairy industry applications.

Abstract

Meat is considered to be a highly perishable food commodity because of its biological composition. Thus, to extend its shelf life and maintain its nutritive value, there is an urgent need to find out alternatives for synthetic anti-microbial and anti-oxidants. This will not only serve the purpose of meat product manufacturer’s but will also satisfy the consumers’ demand for minimally processed meat products devoid of synthetic preservatives. This review discusses the natural antimicrobial and anti- oxidants sources viz., various essential oils, their composition and application in different meat and meat products. Essential oils from basil, rosemary, thyme, oregano, ginger, basilica, balm, coriander, rosemary and clove have exhibited a better potential to be used as an antimicrobial agent in meat and meat products. They owe their anti-microbial properties to the phenolic compounds present in them. They dislocate cell membrane and disrupt functionality of bacterial cell membrane and eventually leading to the release of intracellular components. However, essential oils are not widely used due to the pungent and intense aroma imparted to the food, thus there is still need to work out on the novel technologies which can not only increase food shelf life but at the same time, are sensorially acceptable to the consumers.

Abstract

Agro-food industries generate a large amount of by-products and wastes. These byproducts and wastes have a negative impact in terms of the environmental concern due to the increase of pollutant disposal, and industrial sustainability because of high costs related to their management. These byproducts and wastes are rich in minerals, sugars and proteins. The composition and characteristics of wastes from different food processing industries vary and rely upon the production technique and the nature of the product. India is the second largest producer of rice/paddy in the world and the utilization of rice bran is gaining importance. However, a small fraction of these have been utilized. In case of fruits and vegetables, industrial processing of potato generates between 70 and 140 thousand tons of peels worldwide annually. Moreover, 37% of world’s total annual production of banana is shared by India. Hence, to minimize the disposal fees and trash collection new policies and methods have been developed for handling and treatment of wastes and byproducts. This chapter envisages the status of different agro-food industrial byproducts and wastes for the development of different food and non-food products.

Abstract

The interest in the utilization of industrial by-products is increasing day by day and is major reason for exploring different meat, poultry and fish industry waste and optimization of extracting conditions of different valuable compounds. Utilization of these by-products in effective manner can be positive for meat industry economy as well as environmental pollution of the country. Besides the potential revenue losses, non-utilized or underutilized by-products accounts for the extra cost for their disposal. Meat producers are converting these by-products into value added edible and inedible form. Among the most prominent current uses of meat, poultry and fish waste are food ingredients, water treatment, cosmetic and personal care products, biogas/biodiesel, biomedical and pharmaceutical application. Several studies have dealt with the production of several value-added products such as gelatin, collagen, enzymes, specific proteins, bioactive peptides, chitin, chitosan, and pigments fro m the meat industries waste. Recently, in the food and pharmaceutical industry, an increasing number of new applications have been found for products generated from meat, poultry and fish industry waste; in different products as foaming agents, emulsifiers, biodegradable film-forming materials, colloid stabilizers, and microencapsulating agents, in line with the growing trend to replace synthetic agents with more natural ones.

Abstract

India ranks in the world’s five largest producers of over 80% of agricultural produce items. Processing of agricultural produce generates substantial amount of crop residues which can have tremendous value to farmers. However, a large portion of the residues is burned on farm primarily to clear the field from straw and stubble; which affects the environment, soil health and crop yield.The conversion of crop residues to eco-friendly and valuable product like biochar is need of the hour. Biochar is an organic amendment which slowly releases C in the soil, and is stable over the years. Various applications of biochar like reduction in greenhouse gases emission, sequestering C in the soil, increasing crop yield, used as combusting fuel and livestock feedmakes it a promising candidate for sustainable agriculture and environment.

Abstract

Food lost during the production chain is referred to as postharvest loss. Reducing postharvest loss can effectively feed starving mouths while conserving resources and decreasing the pressure to produce more. There are five main areas where postharvest loss can be reduced – harvest, storage, transportation, processing, and retail. New approaches and technologies in each of these areas will increase the amount of food available for human consumption. The total loss due to poor post- harvest processing of agricultural products in India when valued in terms of monetary reflects a tremendous loss in the economy. Annual value of harvest and post-harvest losses of major agricultural produces at national level to be of the order of Rs. 92,651 Crore calculated using production data of 2012-13 at 2014 wholesale prices. Deficits in food items or financial loss should not have occurred if postharvest losses were reduced through proper processing and preservation from harvest to consumption. Both the government and private sector need to invest in research so as to improve and modernize post-harvest facilities for attaining more efficient market infrastructure and distribution channels. Research and extension activities have to be closely coordinated particularly in the public sector for the benefit of farmers, traders and consumers.

Pulses are important ingredients of human diet and principal source of protein of high biological value particularly for vegetarians. These are excellent feed for animals endowed with an unique ability of biological nitrogen fixation, carbon sequestration, soil amelioration, capable to sustain under harsh climate and an integral component of sustainable crop production system. It is expected that by the year 2050 world human population will climb to 9.7 billion, India 1.6 billion and that of Odisha will be more than 5.75 crores. It will be a great challenge by agricultural scientists for assured food security of billions of hungry human mouth with nourishing food especially pulses, oilseeds and other dietary ingredients. Current production of pulses are not sufficient to meet the requirement. In Odisha it is expected to have a shortage of 1.7 lakh tones of pulses towards 2030 if the current rate of production will not increase. The fact is almost similar for nation although India contributes 24 per cent of global pulse production but imports about 2.0 million tones every year. The deficit will further mount as the per capita consumption on dal of an Indian is increasing. It necessitates to increase pulse production which is not happening keeping pace with need (Jena et al., 2015).

In the post-green revolution period, the incessant rice-rice/wheat crop rotation has undoubtedly made the country surplus in cereal production but has marginalized pulses. This has raised serious concern about sustainability of the production system. Recognizing the importance of pulses for meeting dietary requirements of vast vegetarian population on one hand and their role in improving soil health and conserving natural resources on the other, the efforts were made to develop high yielding, short duration and disease resistant varieties of different pulse crops which can help in diversification and intensification of popular cropping systems. As a result, several new cropping systems have been designed, developed and advocated for rainfed and irrigated areas.

Introduction

Rose, acclaimed as the “Queen of Flowers”, is one of the most popular cut flowers in the global floriculture trade. Popularly referred to as ‘Dutch rose’ in the international market, cut rose occupies a prominent place among the cut flowers owing to its exquisite form, size and attractive colours. Apart from cut flower it is used for making various value added products such as rose oil, rose water, garland, gulkhand, rose attar etc and also in landscaping as pot plant and garden plant. The present day rose (Rosa hybrida) combines all desirable qualities such as, productivity, attractiveness of buds, a variety of colours and forms of the typical species of Rosa.

The major cut rose producing countries of the world are the Netherlands, Colombia, Kenya, Israel, Italy, United States, and Japan. In India, roses are mostly grown under cover (poly house) in Nasik, Pune, Hosur, Kalimpong, Darjeeling, Bangalore, Solan, Palampur, Shimla, Srinagar, Delhi, Ludhiana and Calcutta. The roses grown for export should be popular varieties of that region and maintain high quality standards with respect to bud size and stem length and should have lush green leaves and be free of pests and diseases. These high quality standards can be achieved and maintained only when grown inside poly house or greenhouse, which gives protection against inclement weather conditions and pests and diseases.

Introduction

Flowers speak millions of unspoken words. Presenting a bouquet and making arrangements with flowers in most of the drawing rooms, offices, hotels and hospitals have become the style of the day in the fast – moving modern world where there is hardly any time for exchange of sweet memories. Since time immemorial, the importance of such a delicate creation of nature has always been appreciated. Tamil Nadu ranks first among the flower producing states of India, contributing 25% of the country’s flower production with an area of 31, 970 ha under flowers. Of this, around 700 ha are under protected cut flower cultivation. In Nilgiri district alone, it has an area of around 70 ha under protected cut flower production which is inclusive of around 11.2 ha of lilium.

The genus Lilium (Lilium spp.) is a herbaceous flowering plant normally grown from bulbs, about 110 species world over belongs to lily family Liliaceae. It is native of the northern temperate regions. The species in this genus are the true lilies while the other plants with lily in the common name are related to the other groups of plants. Lilies are usually erect leafy stemmed herbs. The majority of species form tunicless scaly underground bulbs from which they produce flowers. The large flowers have three petals along with three sepals, look like petals.

Introduction

Alstroemeria also known as the lily of the Incas, Peruvian lily or Inca lily, has been grown mainly as a cut flower crop. Recently, it has become popular as a garden flower and also as a potted flowering plant. The plants produce beautiful large inflorescence in many different colours viz. lavender, orange, yellow to dark yellow, white, pink, red, purple and bi-colors. Flowers are characterized by black dots at the base of the petals and throats. The cut flowers have a long post harvest life, up-to two weeks. These valuable characteristics have made Alstroemeria one of the top cut flowers at the Dutch Flower Auction Centers. The plants produce high yield and possess an ever blooming habit after flower initiation has occurred but in general most cultivars flower best during spring and early summer. The straight, un-branched shoots emerge from underground rhizomes which also produce enlarged storage roots. It is gaining popularity in Indian flower market due to long stem flowers and prolonged vase life. Recently flower growers have shown great interest about its production as a cut flower crop.

Introduction

Gerbera is one of the most important commercial flowering crops growing in the world as a cut flower as well as garden decoration, which belongs to family compositae and native in South Africa and Asiatic region. Presently, its demand and utility are rising up continuously in India both in urban as well as rural areas throughout the year. Peoples prefer this flower, because of its unparallel diversity in colour and long vase life; whereas farmers took this crop in relation to high margin of profit and long post harvest life over some others flower. Now, people are showing their keen interest towards use of this flower in their daily life and for celebrating a colorful festival. As per report of NHB (2014), total crop area is 820 hactors, where flower marketed of 3.96 and 17.84 MT of loose and cut flowers respectively. The prime producing states in India for gerbera flower production are Karnataka, Maharastra, Assam, Uttrakhand, Telangana, Tamilnadu and West Bengal. There are some constrains identified in gerbera cultivation under protected situation, like initial investment is too much, protocol of the technology is very much restricted, regular supervision is an essential and all local festivals regulates quantity of consumption etc. However, before adopting this technology for implementation as taking part of business, users should upgrade their knowledge by seeing and believing at different production centers. Details about latest technology are summarized under mentioned, which may be helpful to the students and farmers to some extent for ready references.