eChapters

Key Points

• Animal bites containing poisons, venoms, or diseases cause significant morbidity and mortality.

• Unattended animals are vulnerable to various types of bites, including snakes, spiders, scorpions, bee stings, lizards, and dogs.

• Snake bites can be life-threatening for both humans and animals and require emergency treatment.

• Dog bites can cause rabies in both people and animals.

Introduction

If left alone, curious animals are likely to be bitten by a variety of insects. Bite severity varies by animal species. Typically, stings and bites are painful and dangerous. It can be life-threatening in certain situations.

Millets are an essential food in the world’s semi-arid and arid regions. These are effective energy providers. They provide dietary fibre, polyphenols, fatty acids, minerals, vitamins and protein. The production of tropical crops is highly risky due to the pest outbreaks and increased abiotic pressures triggered by the climate change. Despite the fact that conventional breeding methods have greatly enhanced crop yield and output, new strategies are needed to further enhance crop productivity in order to fulfil the world’s expanding need for the food. The use of site-specific nucleases like zinc finger nuclease (ZFN), transcription activator-like effector nuclease (TALEN) and clustered regularly interspaced short palindromic repeat associated proteins 9 (CRISPR-Cas9) are the genome editing technologies developing very fast. The advancement of plant genome research and its use in plant breeding are significantly aided by such achievements. CRISPR/Cas9 and related genome editing methods are emerging as appropriate methods to reduce the negative consequences of climate change and assure the long-term food security of tropical countries’ growing populations.

A. Mollicutes: Phytoplasmas and Spiroplasmas
Characteristics of Mollicutes
Mollicutes are a group of bacteria-like organisms that lack a cell wall, making them more flexible and pleomorphic (variable in shape). They are primarily obligate parasites, meaning they can only survive within a host. The two most significant genera within this group are phytoplasmas and spiroplasmas.
a) Phytoplasmas: These are wall-less, pleomorphic bacteria that reside in the phloem of infected plants, causing a range of systemic diseases. Phytoplasmas are transmitted primarily by phloem-feeding insect vectors, such as leafhoppers.
b) Spiroplasmas: These are spiral-shaped, wall-less bacteria that also reside in the phloem and are transmitted by insect vectors.
Phytoplasma-Induced Diseases
Phytoplasmas cause diseases that often lead to severe deformities in plants. Some of the major diseases caused by phytoplasmas include:

Introduction

Public extension services in the agricultural sector have not kept pace with new challenges and opportunities. Overall, the reform measures initiated by the Government are yet to penetrate agriculture and allied rural sectors. The development of linkage in agriculture is extremely important for the system approach, in order to provide proper knowledge and services to the farmer contributing to the agricultural production. Many service sectors in agriculture are working independently to achieve their organizational objectives. This results in less organizational effectiveness and exhibits poor forward and backward linkages. Public private partnership and NGO partnership has been promising institutional interventions to provide need based information through information and communication technologies (Van Den Ban 1997). Policy frame work for Agricultural Extension (2000) has notified the provision for establishing partnership with private and other public agencies. Uzhavar Udhaviyagam is one of the interventions implemented by Govt of Puduchery since 2000, with an objective of integrating various agro extension services offered by related public sectors, private sectors and NGOs, cooperative sectors under one umbrella. This is a’so providing ample scope for establishing 3 Ps (Public private/NGOs partnership) model and participatory extension services. Keeping this focus point a study has been formulated with an objective to study the degree of linkage on information sharing and dissemination regarding the extension services rendered by Uzhavar Udhaviyagam.

Employee motivation and job enrichment are described as two management techniques used to improve human behaviour and attitude towards work, with a view to utilize available human resources more efficiently and thus make man-management more effective. Just as the employee has certain wants that the organization is expected to satisfy, the organization too expects certain types of behaviour usually termed as ‘Direction’ or ‘Motivation’. Obviously this managerial function is not so easy, as it involves many problems, and it is these problems and their possible solutions that one is concerned.
Job enrichment is also a motivational problem created by the alienation of employees from their work, or by lack of their interest in their work. Here the problem is how to make the work more interesting, purposeful and acceptable to employees so that they may perform it more enthusiastically and with a greater sense of responsibility. Like motivation this is also a problem of human behaviour and work attitude. In fact both employee motivation and job enrichment are the problems which every supervisor and manager has to face while working and making their subordinates work.

A. Answer the following questions:

1.    What is proximate analysis?

Ans: Proximate analysisis a systemforapproximatingthenutritive valueof a feedstuff without actually usingit in a feedingtrial.

2.    Why proximate analysis is called Weende analysis?

Ans: In 1865, two scientists namely Wilhelm Henneberg and FriedrichStohmanndeviseda methodcalledWeende analysis/ proximate analysis at Weende Experiment Station, near the University of Goettingen, Germany. Hence, it is called ‘Weende Analysis’.

3.    Write the six proximate principles?

Ans: Water (moisture), ether extract (crude fat), crude fibre, total ash, crude protein and nitrogen free extract (NFE).

4.    Why ether extract is also called as crude fat?

Ans: As it is composed of true fats (glycerides of fattyacids) along with other substances like hydrocarbons, free fatty acids, fat solublevitamins,pigmentslike carotene & chlorophyll,waxes, sterols,lecithin(phospholipids), alkali substances,volatile oils and resins.

5.    What is NFE?

ABSTRACT

Owing to paucity of available genetic / molecular markers, onion breeding still relies heavily on phenotypic selection methods. DNA markers can provide plant breeders genetic information for indirect selection of plants. All the DNA based procedures require high quality plant genomic DNA. Abundance of polysaccharides and phenolics present in plant tissue often impede PCR amplification. The polysaccharide contaminants can also produce downstream problems by inhibiting many of the enzymes that are employed in subsequent analysis and cloning. RFLP based markers in Allium species pose certain problems due to relatively large size of the genome compared to most other herbaceous crops. As an alternative, RAPD would prove advantageous in genetic analysis of Allium. Here we present our results on optimization of DNA extraction in onion to get amplifiable quality of DNA for further RAPD analysis. Leaf samples were collected from the onion germplasm maintained at Indian Institute of Horticultural Research (IIHR), Bangalore. Dried leaf protocol was suitably modified to obtain fair quality of DNA. After varying each of the ingredients of the extraction buffer we arrived at the optimal extraction buffer, which resulted in good quality DNA. Quality was analyzed by subjecting the DNA to agarose gel electrophoresis and restriction digestion. Extracted genomic DNA was quantified with ‘Hoefer’s Dynaquant’ (Pharmacia, USA). The DNA quantity ranged between 160-2400mg/gm of dried powder. The standardized 25ml PCR mixture contained template DNA (25ng), 5 pmol of primer (Operon Tech. Inc., Alameda), 2mM MgCl₂, I unit of Taq polymerase (Bangalore Genei), with 10x buffer along with 200 mM each of dNTPs. Amplifications were performed in thermal cycler (MJ Research, PTC 100) for 45 cycles after an initial denaturation of 95°C for 3 minutes. In each cycle denaturation for one minute at 95°C, annealing for one minute at 35°C and extension for two minute at 72°C was programmed with final extension step at 72°C for 5 minutes. This fine tuned protocol resulted in clear, informative RAPD profile.

Abstract

The research work was conducted on the moisture dependent physical properties of kidney bean (White speckled kidney beans) were analyzed. Length, width, thickness varied between 1.53-1.90, 0.79-0.94, 0.58-0.76 cm for kidney beans, respectively. Arithmetic mean diameter and geometric mean diameter were 0.96-1.19 and 0.88-1.11 cm₂, respectively. Volume, Sphericity and surface area ranged between 0.44 -0.87 cm₃, 0.57-0.60 and 2.91-4.68 cm₂ for white speckled kidney beans, respectively. The kidney bean was soaked in normal water with initial moisture content 14.22 % (db) upto 270 min and attained the final moisture upto 83.23 % (ab).

1. SEED CERTIFICATION

Seed Certification is a legally sanctioned system for quality control on seed multiplication and production. It involves field inspection, pre and post control tests and seed quality tests.

1.1. Phases of Seed Certification

Certification shall be completed in six broad phases listed under

Yellow pigment in papaya - Caricaxanthin

• The enzyme present in dried latex of papaya (papain) is pepsin.
• Frost is the most limiting factor for papaya cultivation in North India.
• Papaya is a polygamous plant. –
• 20 seeds of papaya weigh one gram
• Carpine obtained from papaya is used as a diuretic and heart stimulant.
• 10% male plants are planted wherein dioecious varieties are calculated.
• Papaya plants are extremely susceptible to waterlogging.
• Papaya is thermosensitive crop.

  Carica candoamarcensis is scientific name for Mountain papaya.

• Papaya has the highest production after banana.
• Sunrise Solo type papaya produces no male plants.

ABSTRACT

The present investigation was undertaken to standardize the DNA extraction methods, to optimize the PCR conditions and generate RAPD’s to study the genetic variability in chrysanthemum. Total genomic DNA was extracted from freshly emerged leaves of chrysanthemum cultivars (Flirt, Nagpur Red, Snow Ball) using different DNA extraction methods (CTAB method, SDS potassium acetate method, SDS miniprep method and urea phenol method). The highest amount of DNA (349μg/g of leaves) was extracted using CTAB method, while it was lowest (130 μg/g of leaves) in SDS miniprep method. The absorbance ratio was high for DNA extracted by CTAB method (1.82) followed by SDS- potassium acetate (1.65) and SDS miniprep (1.60) methods. For standardization of PCR ampl ification conditions, optimization was carried out to determine the optimal concentrations of template DNA, MgCl₂, Taq DNA polymerase and annealing temperature. In general, either no products or products with inconsistent bands were obtained when the concentration of template DNA was 25 ng or MgCl₂ was 1.0 mM with high annealing temperature of 45°C.

Horse

The scapula of horse is a flat triangular bone placed at the shoulder region applied against the cranial part of the lateral wall of thorax similar to that in ox. The scapular spine is placed a little further caudad from the cranial border so that the proportion of the area of supraspinous to infraspinous fossa is one third to two third of the lateral surface of the scapula. The subscapular fossa is deeper and presents well marked vascular impressions. The nutrient foramen is placed at the distal third of the infraspinous fossa. The tuber scapulae and the glenoid cavity are placed further apart. The glenoid cavity is oval in outline and its rim has a distinct notch on its craniomedial aspect. The coronoid process is better developed and the acromion process is absent.

The humerus in horse is directed obliquely distally and caudally forming an angle of about 55 degrees with the horizontal plane almost equaling to that in ox. The musculospiral groove on the shaft is deeper and more spirally curved. The nutrient foramen is placed on the distal third of the medial surface. The deltoid tuberosity is better developed. The medial and lateral tuberosities of the proximal extremity are more prominent. The intertuberal (bisipital) groove is divided by an intermediate ridge. The summit of the lateral tuberosity does not arch inward. The head is smaller than that in ox. The coronoid and olecranon fossae of the distal extremity are shallower than those in ox.

The radius of the horse is larger and longer of the two bones of the forearm. Close to the medial border of the caudal surface in the lower third of the shaft is a rough elevation for attachment of the superior check ligament (an accessory ligament of the superficial digital flexor). The caudal surface of the shaft towards its lateral border presents a rough triangular area which tapers to a point in the distal third of this surface. This is for attachment of the ulna. The distal interosseous space is absent because the shaft of ulna is shorter and does not reach to the distal part of the shaft of radius. The grooves on the cranial surface of the distal part of the shaft are better marked. The radial tuberosity at the craniomedial aspect of the proximal extremity is larger and more prominent than in ox. The distal articular surfaces are not oblique. It presents two tubercles one on each side, for ligamentous attachment. The tubercle on the lateral aspect is grooved for passage of tendon of lateral digital extensor.

1. UNIT OF CERTIFICATION

The entire area planted under seed production programme by an individual constitutes an unit, provided;

1. All the seed production programme is to produce seed of one category and one variety.
2. Area does not exceed 10 hectares and scattered fields constituting one unit (10 ha) should not be separated by more than 50 metres distance (Table 1).
3. The crop of the entire area is more or less of the same growth stage. The seed crop is grown as sole crop and it is not heavily and uniformly lodged.

2.1 INTRODUCTION

GIS is a tool that can be used in varied disciplines ranging from civil engineering to business. Remote sensing data is often brought into GIS to have a complete data set in many natural resource application areas. Full capability of GIS is not used widely. Many a times people use GIS only for digitising maps and to do simple query on maps. But it can also be used in modeling, simulation and forecasting, only then one may regard GIS technology is utilised to its full potential. Some GIS softwares handle simple problems for location based services while other complex softwares posses advanced modules to do all types of spatial, network and 3D analysis. Integration of softwares used in natural resources study are being interfaced with GIS to create scenarios.

Remote sensing and GIS technology is useful in the following fields:

Shoulder joint

The shoulder joint (Fig. 5-2 A) is an enarthrosis formed between the glenoid cavity of scapula and head of humerus.

Ligaments: The shoulder joint is enclosed by the capsular ligament which is loose enough to accommodate the wide range of movements of the joint and is attached about 1.25 cm away from the periarticular area of the two segments of the joint. The capsular ligament is supported externally by the muscles of the shoulder region.

Movements: The shoulder joint performs all kinds of movements but the extension and flexion are best marked.

13.1. Germplasm

Also known as genetic resources or gene pool or genetic stock.

Sum total of hereditary material i.e. all the allele of various genes, present in a crop species and its wild relatives

Importance of training and pruning

1. To control the habit of vegetative growth and regular bearing.
2. Remove all limbs and dead branches.
3. To improve flowering, fruiting and fruit quality
4. Remove all broken shoots, diseased, or pest infection branches from all trees and shrubs.
5. It is usually best to prune temperate fruits and shrubs during early spring before full leaf.
6. Maintain balance between shoots and roots at planting and nutrients uptake
7. Provide the basic tree form and to aid the development of a strong tree framework by encouraging strong wide crotch angles
8. Stimulate shoot growth near a cut.
9. Permit proper light distribution and penetration to the tree canopy.
10. Increase insect and disease control by allowing for better spray penetration.
11. Facilitate harvesting.
12. Achieve orchard uniformity.
13. Produce the proper amount of well distributed fruiting wood.
14. Encourage a structurally sound tree by removing branches with weak narrow crotch angles or those with diseased, damaged, or unproductive wood. Invigorate and renew the bearing area of older trees.

14.1 Basic Plotting: plot

This functionality on Series and DataFrame is just a simple wrapper around the matplotlib libraries plot() method.

Example

import pandas as pd

import numpy as np

df = pd.DataFrame(np.random.randn(10,4),index=pd.date_range(‘1/1/2000’, periods=10), columns=list(‘ABCD’))

df.plot()

Its output is as follows:

If the index consists of dates, it calls gct().autofmt_xdate() to format the x-axis as shown in the above illustration.

Agriculture economics is the study of how resources are used, distributed, and utilised in order to create agricultural products. A consistent level of farm surplus is one of the sources of technological and commercial expansion, so agricultural economics has an impact on the economics of development.

In general, it may be said that average salaries are low when a sizable portion of a nation’s population depends on agriculture for a living. It is more accurate to argue that a country’s majority of people must rely on agriculture because it is impoverished rather than that a country is poor because the majority of its population works in agriculture.

Features of Agriculture

Agriculture is the principal industry of employment. Nearly 61 percent of the whole population is employed there. It makes up 25% of the country’s income.

Monsoon dependence: The monsoon is crucial to Indian agriculture. The production will increase if the monsoon is good, and the crops will fail if it is below normal. Floods can occasionally ruin our crops. Agriculture depends on the rainfall since irrigation systems are so poor.