eChapters

Fruits and vegetables are living tissues subject to continuous change after harvest. Some changes are desirable from consumer point of view but most are not. Post-harvest changes in fresh fruit cannot be stopped, but these can be slowed down within certain limits to enhance the shelf life of fruits. The post-harvest handling plays an important role in extending the storage and marketable life of horticultural perishables.

Post Harvest Treat ment of Fruits and Vegetables Washing

It is useful in removing surface adhering material water. Mechanically, it is also accomplished by passing the fruits/vegetables through machine arranged with water tank equipped with rotating brush. In some produce washing improves appeal by facilitating removal of sap as case in mango, papaya, jackfruit, kronda, dirt in case of carrot, reddish, turnip, sugar beet, sweet potato, etc. and for removal of debris in case of banana. The water use for the purpose should be cleaned otherwise fungal and bacterial levels may build up. Disinfected treatment using ultraviolet light, ozone, chlorine (100 ppm), calcium hydroxide, etc. help to clean water for washing purpose.

Maturity

It is derived from Latin word ‘Maturus’ which means ripen. It is that stage of fruit development, which ensures attainment of maximum edible quality at the completion of ripening process.

Maturation

It is the developmental process by which the fruit attains maturity. It is the transient phase of development from near completion of physical growth to attainment of physiological maturity. There are different stages of maturation e.g. immature, mature, optimally mature, over mature.

Maturity Indices

The factors for determining the harvesting of horticulture commodities according to consumer purpose and type of commodity.

Maturity Indices is two type

Fruits and vegetables are important part of our dietary, which are rich source of nutrient (carbohydrates, protein, fat, vitamins, minerals, and dietary fiber). Carbohydrates, protein and fat are macronutrients, considered as energy sources. Vitamins and minerals are micro nutrient, play important role in body building. Fibers have several direct and indirect advantages. ICMR, New Delhi recommends 125g of leafy vegetables, 100g of root and tuber vegetables and 75g of other vegetables (total 300g/day) and 85g of fruits per capita every day for balance diet.

India is a second largest producer of fruits and vegetables after China. These share are 10% and 16% respectively in total world production. Horticulture crops occupy 23.548 million ha and production is estimated around 260.063 million tones. Total area of fruits, vegetable, plantation crops, spices, loose flower and aromatic plant are 7012, 9083, 3606, 3092, 218 and 537 thousand ha, respectively and production are 79400, 156445, 16388, 5786, 1421 and 622 thousand tones, respectively with productivity are11.32, 17.22, 4.54, 1.87, 6.59, 1.19 thousand tones per ha, respectively (2012-2013). The total productions of cut flowers are 74305 Lakh stem (2012-2013). The annual horticulture export volume is 2733145 metric tonnes (2010-2011) with total exported value of Rs 696461 lakh. In terms of volume, fresh fruits & vegetables comprised about 76 % of exported horticulture produce followed by processed fruits & vegetables (23 %) and floriculture & seeds (1%). After that losses found 20-30 % in fruit and 30-40 % in vegetable while harvesting to consumption in India. It’s due to the perishable nature of horticulture commodity, non availability of appropriate post harvest infrastructure transportation, inadequacy of the market or lack of processing.

India is a major horticulture producer, even though processing is less than 2 %. This is very low as compare to 80 % of Malaysia, 78 % of Philippine, 70 % of Brazil and 30 % of Thailand. The most of developed country 40-60 % fruits and vegetables utilize in processing.

Proper handling, packaging, transportation and storage reduce the post harvest losses of fruits and vegetables. For every one percent reduction in loss will save 5 million tons of fruit and vegetable per year. Processing and preservation technology helps to save excess fruit and vegetable during the glut season. The technology has become a necessity to improve the food safety and strengthen nations food security. The technology helps to boost export of agricultural commodities in the form of preserved and value added products.

5.1 The Need

In spite of the considerable experience and quite a few facilities available in the country, the growth of application of isotope techniques is not commensurate with India’s size, its climatic and hydrogeological diversity and the sheer range of its water resources problems.

The situation may not be unique to India and other developing countries. Australia also appears to be facing a similar problem. A recent publication [1] says ‘the limited uptake of the method may be due to a number of factors. Until relatively recently, isotope hydrology has remained a largely academic pursuit, or measurements were the domain of national atomic energy agencies. A large fraction of information lies buried in the grey literature or in arcane technical journals. Interaction with local or regional water resources agencies has been the exception rather than the rule’

India has probably a stronger case for a more effective use of isotope techniques. A large portion of groundwater occurs in hard rocks in India. Normal hydrogeological and geophysical methods cannot fully describe such groundwater regimes to effectively plan their exploitation. It is essential to apply tracer hydrology methods, especially isotope geochemical techniques, for a comprehensive understanding of the systems. The examples of Manikaran geothermal springs, seepage studies in Salal tunnel and in some dams, given in the earlier chapters come under this category. Studies on percolation tanks in basaltic terrain and on recharge processes need isotope support.

It will not be long before we would be planning to exploit very deep ground waters (>500 m), both in the hard rock terrains of peninsular India as well as in the Ganga plains to meet our ever growing need for water. We would need good understanding of the recharge processes to these deep ground waters. Isotopes will have a large role in such investigations.

Arid zone hydrology is yet another area where the potential of isotope techniques has been effectively demonstrated for the characterization of the recharge processes, both palaeo and modern, and including the role of ancient rivers.

After precipitation, run-off and surface water storage in lakes and man-made reservoirs, the next steps in the hydrological cycle are infiltration through the unsaturated zone and groundwater dynamics in the saturated zone. Well-established applications of isotopes in groundwater hydrology are

The range of isotope applications in surface water hydrology is not as wide as in groundwater hydrology as the surface waters are more easily amenable to conventional hydrological methods. Following are the areas in which isotopes have a significant role in either improving the accuracy of measurements or in providing additional information, which is otherwise not easily available.

In the last chapter, we have broadly introduced the concept of tracer hydrology and also the concepts of isotopes as tracers, their characteristics and measurement techniques. In this chapter let us see the basis of application of each group of isotope tracers, injected and environmental.

What are the different groups of isotope tracers used in hydrology and how are they classified?

“Hydrology is the science that treats the waters of the earth, their occurrence, circulation and distribution, their chemical and physical properties, and their reaction with their environment, including their relation with living things. The domain of hydrology embraces the full life history of water on the earth.” (Federal Council for Science and Technology, “Scientific Hydrology”, Washington, 1962)

This definition puts in a nutshell what is most often inadequately done before undertaking exploitation of water resources. In short, it is the scientific inputs that are likely to be missed while planning water resources management projects. It is the “full life history of water” part of the above definition that is of specific relevance to the theme of this book, Isotope Hydrology.

Conventional hydrology is strong on measurement and quantification of different parts of the hydrological cycle (Fig.1.1), be it precipitation, run-off, evaporation, transpiration, infiltration, groundwater dynamics etc. Through chemistry and isotopes, we try to understand the processes themselves in order to delineate the history of that part of the hydrological cycle that is being studied. For example, if we are measuring river flow, we would like to know the contribution of different components; base flow, rainfall run-off and snow melt, if any.

Let’s see what we know and what do not know in the conventional hydrological practice. We know surface waters evaporate, form into clouds and precipitation occurs under favourable weather conditions. What we often do not know is the source of moisture, oceanic or inland.

Insect and non-insect pests cause extensive damage to standing crops, stored grains and stored products resulting in huge economic loss. Besides these, several pests cause annoyance, as well as attack livestock such as, cattle, poultry and pet animals. Some others damage household articles such as, clothing, upholstery, carpets, paper, books, leather articles, wooden and bamboo furniture and all sorts of wooden structures. These obnoxious creatures besides consuming any kind of food materials, spoil them by contaminating and polluting them with their faecal matter and urine and impart a repulsive, bad odor and make them unfit for consumption by humans and livestock. The damages caused by them pave the way for easy access and infection by some of the saprophytic microorganisms, which hasten the deterioration process. A few of these microorganisms produce mycotoxins, which are poisonous and may even be fatal to the consumers.

Among the household pests, cockroaches, crickets, silver fish, ants, white ants, carpet and powder post beetles and clothes moths are quite important. These insects not only cause annoyance but different types of flies, mosquitoes, bugs, fleas and lice either suck and feed on the blood from humans, cattle, poultry etc. but are also responsible for disseminating several disease causing microorganisms.

Mango (Mangifera indica)

1. Mango hoppers

(i) Amritodes atkinsoni (ii) Idioscopus niveosparsus and (iii) I. clypealis

Order - Hemiptera

Suborder - Homoptera

Family - Cicadellidae

Nature of damage. Three different species of hoppers are found to cause damage to mango trees. During some years, especially during the months of November-February, when the mango trees come to flowering, the pest appears in large numbers. During the other months, the pests are seen in much lesser numbers in an active form, while the other insects hibernate under the bark of the trees. Even in the peak period of pest occurrence, after a few heavy showers, the number of insects is considerably reduced.

During the cold season, when the trees put out the flower spikes, thousands of hoppers, young and adults appear in large numbers, pierce, suck and feed on the sap from the tender shoots, flower stalks, flowers and buds. This drain of the sap causes the buds and flowers to dry, wither and they are shed in large numbers, as a result fruit production may go down by 25-60 per cent. When a severely infested tree is approached, thousands of hoppers hop or fly about and make a rustling noise, as they dash against the foliage. The hoppers exude a sweet, sticky fluid excretion and this fluid thrown out by myriads of these insects after feeding on the tree sap, wets the soil underneath the trees and on the surface of the leaves of the trees. In case of severe infestation, the fluid may fall down in drops. The secretion attracts scores of flies, bees and other insects, which come to feed on the secretion. The infested tree presents a sickly appearance. The trees get devoid of buds and blossoms. The leaves appear shiny and are covered by ‘sooty mould’, a fungal disease. Thousands of caste skins of the nymphs are found on the shoots and leaves. The continuous damage caused to the trees year after year by the pest makes them loose their vigor gradually and eventually leads to severe reduction in their yielding capacity.

Life cycle of the pest. The female hopper inserts spherical, pale whitish eggs singly into the plant tissues through slits made in the young shoots, flower stalks and flower spikes. The eggs hatch in 4-6 days and the young nymph hatching out of the egg looks quite similar to the adult. The nymphs are very active and move about rapidly along the flower spikes and shoots, suck and feed on the plant sap. They are smaller in size, wingless and unable to fly or jump. The young ones moult their skin a few times during their growth and become adults in 10-15 days. The adult hoppers are small insects, about 3.0 mm. in length with a wedge-shaped body. The head is broader and the body gradually narrowing backwards. The legs are well developed, especially the hind legs. The general color is light greenish-brown. They are extremely active and can fly and hop around. They have a tubular, sucking mouthpart by which they puncture the tender plant parts and floral parts. The adults of Idioscopus clypealis are smaller, with two black spots on the prothorax and a few black spots on the front portion of the head, while those of Idioscopus niveoparsus are slightly bigger with three black spots on the prothorax and whitish, distinct cross bands on the light brownish forewings. The adults of Amritodes atkinsoni are bigger than the other two species, about 5.0 mm. in length, with two black spots on the prothorax. Two or more generations may appear during the flowering season of mango trees (Fig.71).

PESTS OF CEREALS

Rice (Oryza sativa)

Rice is the staple food of a vast majority of people throughout the world, especially in India. Rice crop is grown in about 75 million acres, which is about one-third of the total world area under rice. The warm and humid environment for the rice crop is best suited for invasion by several insect pests and as many as 85 species of insects are known to infest this crop. The damages caused by different pests extend from the seedling to harvest stages of the crop. Some of these pests are widely distributed and cause extensive damage. The more important pests are described below:

1. Rice stem borer or Rice yellow stem borer

Scirpophaga (Tryporyza) incertulas

Order - Lepidoptera

Family - Pyraustidae

Among the pests, which ravage rice crop, ‘rice stem borer’ is a major one and infests rice crop at all growth stages, from seedling to flowering. It is a specific pest of rice alone and is more serious during the months of October-January. The pest has a wide distribution in all Asian countries. The damages caused by this pest ranges from 5-20 per cent. Generally, late varieties of rice are more severely infested than the early maturing varieties, because of the possibility of the pest multiplying in larger numbers by the time the late varieties come to maturity. Cold weather with high humidity and low temperature prevalent during October-December is found to be conducive for the multiplication of the insect.

Introduction

Seed pathology has been recognized as its own specialization for a relatively brief time, and the term “Seed Pathology” was first coined by Mary Noble in the 1940 (Agarwal and Sinclair, 1997). Seed pathology is an essential part of seed technology as well as a sub discipline of plant pathology. According toAgarwal and Sinclair (1997), it may be defined as the study of seed borne disease and pathogens carried with seed. It also includes studies on the mechanisms of seed infection, seed transmission, the role of seed borne inoculum in disease development, methods for the detection of seed borne pathogens and non-pathogens, seed certification standards, mycotoxins and mycotoxicoses, and various methods for control of seed borne disease. Seed pathology includes the study of diseases and deterioration caused by bacteria, fungi, nematodes, viroids, viruses, physiological and mechanical disorders.

Neergaard Paul is considered the father of seed pathology. He was one of the founding father and later served as Director of the Danish Government Institute of Seed Pathology for Developing Countries, Copenhagen, Denmark, from 1956 to 1974. He served as the Chairman of the Plant Disease Committee of the International Seed testing Association (ISTA). During his tenure as Chair of ISTA, he helped standardize methods for the detection of seed borne fungi.Neergaard (1977) authored a two-volume text entitled “A Seed Pathology”. This text has served as a reference and teaching standard for the science of seed pathology throughout the world (Agarwal and Sinclair, 1997). This text focused on a wide variety of seed pathology issues, ranging from the economic significance of seed borne diseases to the assessment of seed borne inoculum.

Introduction

In India, around 70 per cent of cultivated land is under rainfed condition, but it accounts for about 42 per cent of the total quantity of produced food grains (Sujatha et al., 2013). It was estimated that using quality seeds, productivity can be enhanced up to the extent of 15-20 per cent and under optimum management, the increment may touch upon up to 45 per cent depending upon the crops. Quality seeds play a major role, along with improved package of practices leading to enhanced productivity. Crops propagated with seeds face many problems: Poor seed germination, poor seedling establishment under several abiotic stresses such as, drought, salinity and poor seedling vigour. The capacity of a crop propagated with seeds to grow depends on its genetic constituent and its interaction with the environmental biotic stresses. A number of diverse materials/ treatments at varying doses have been used to increase the rate and uniformity of seedling emergence in many field crops, which are generally categorized for seed enhancement. Seed enhancement may be defined as “post-harvest treatments that improve germination and seedling growth or facilitate the delivery of seeds and other inputs/materials required at the time of sowing smoothly”. Seed enhancement technology predominantly possess a central objective to further improve seed performance by treating with specific additives/chemical/organics/botanicals etc. under very specific regimes and with the aid of certain planting equipments to grow uniform crop obviously to harness higher productivity and production (Halmer, 2006). There are several ways and means to enhance vigour of germinating seedlings while emerging from the seed, which produce a uniform crop stand and finally substantially more yield is achieved by adopting simple techniques.

Introduction

Quality seed plays seminal role in augmenting agricultural production as well as productivity. Only by using good quality seeds, productivity can be enhanced up to the tune of 15-20 per cent alone, but under optimum management, the increment may touch upon up to 45 per cent depending upon the crops since the efficiency and efficacy of all other inputs in the production technology gamut are contingent upon the quality of seeds being used. Since antiquity the importance of quality seed to enhance agricultural productivity is well evident as mentioned in old testimonials, literatures, scriptures, treatises, epics, and many other ancient documents.

Seed quality is the major decisive factor governing stand establishment of any crop and thus having immense importance and bears utmost priority in case of high value, low volume crops like vegetables in particular and for high volume low value crops in general for enhanced productivity and production as well (Mandal et al., 2015). A number of diverse materials/ treatments at varying doses have been used to increase the rate and uniformity of seedling emergence in wheat and rice, which are generally categorized for seed enhancement, which is a kind of value addition.

Seed enhancement may be defined as post-harvest treatments that improve germination and seedling growth or facilitate the delivery of seeds and other inputs/materials required at the time of sowing smoothly. Seed enhancement technology predominantly possess a central objective to further improve seed performance by treating with specific additives/ chemical/ organics/ botanicals, etc. under very specific regimes and with the aid of certain planting equipments to grow uniform crop obviously to harness higher productivity and production (Halmer, 2006). Various techniques have been employed to assure superior performance of additives in different crops and most have been found to have immense commercial application (TeKrony, 2006). This includes three general areas of enhancement: pre sowing hydration treatment (priming), coating, pelleting technologies and seed conditioning.

Heterosis

The superiority of F₁ hybrid over both its parents in terms of yield or some other characters or heterosis is increased vigours, growth, yield or function of a hybrid over the parents, resulting from crossing of genetically diverse organisms. The term heterosis was first coined by Shull in 1914. Generally heterosis manifested as an increase in vigour, size, growth, yield or some other characteristics. But in some cases, hybrid may be inferior to the weaker parent this is also regarded as heterosis.

Introduction

Seeds are regarded as carriers of new technology and serve as basic catalytic input for enhancing the agricultural production. Hence the timely availability of quality seeds of the right variety in adequate quantity decides the strength of an agricultural economy. The intensive crop improvement programmes have resulted in the development of large number of hybrids and high yielding varieties in many important crops. Today, the Indian seed industry is the fifth largest seed market in the world, accounting for 4.4 per cent of global seed market. In terms of global trade, India is almost self-sufficient in flower, fruits and vegetables and field crops seeds (Anonymous, 2015). Economy of crops depends on good crop variety. Farmers choose these verities based on good quality traits and satisfactory yield. Thus, it is always essential to do fidelity check of all plant variety. The genetic purity is one of the most important aspects of quality control. Seed quality includes good germination, purity, seed health and vigour. With the increase in seed industry, there has been a refinement in the techniques used for testing genetic purity or genuineness of seed purity. Methods for testing genetic purity include different morphological, chemical, biochemical and molecular markers. Under PPV & FR Act, DUS (distinctiveness, uniformity, stability) testing procedure is performed with morphological descriptors. However, in agriculture, biotechnology has found applications in checking of true to type of clones and variety identification programs using molecular and chemical markers. Markers that reveal polymorphisms at the protein level are known as biochemical markers, while DNA markers reveal polymorphisms at the DNA level.

Introduction

Seed certification is a legally approved system for quality control of seed multiplication and production. Seed certification procedures are designed to ensure physical and genetic purity, freedom from other crop seeds, objectionable and other weed seeds and designated diseases with good germinability of the foundation and certified seed. Seed certification is done by the State Seed Certification Agency of the concerned state (SSCA) notified under section 8 of the Seeds Act, 1966 or by National Seed Corporation (NSC), where State Seed Certification Agency does not exist. The General Seed Certification Standards are applicable to all crops, which are eligible for certification, while field and seed standards are applicable to individual crop, constituted as the minimum seed certification standards. The word ‘seed’ or ‘seeds’ as used in these standards also includes all the propagating materials. Seeds or propagating material, which does not meet the standards of seed certification prescribed in the Indian Minimum Seeds Certification Standards, 2013 (Gunasekaran and Trivedi, 2013), are not certified by the Seed Certification Agency. The general seed and field standards for various crops are given at the end of this chapter.

Methods of Analysis

Organic material especially, seeds, grains, fruits and nuts contain mainly three groups of compounds. They are carbohydrates, proteins and fats/oils, mostly in that order. They also contain 3-5% minerals and smaller quantities of vitamins and other minor constituents. Cereal grains contain more of carbohydrates while oilseeds contain more oil. Tree nuts and even oilseeds may contain 30-50% protein while cereal grains contain 5-8% protein. The starch and sugar contents of oilseeds may be less than 10% while the oil content of cereal grains ranges around 5%. The actual content and the composition of these groups of compounds really account for the quality as well as their commercial value.

The composition and quality of grains and other plant products vary with respect to their genetic background, location or the soils under which they are grown, season or the environment, the maturity of the grain/product or its harvest stage and the post harvest processes including storage etc. Crop scientists have in recent years been bringing out made to order or designer seeds, whose quality and composition need to be examined to satisfy the needs of the quality conrol and consumer requirements. Keeping this aspect in view this chapter has been designed.

As this book deals with oilseeds, emphasis has been placed on methods of evaluation relating to thier composition and quality. This chapter deals with methods of oil, protein and sugar analysis. Oil being the major constituent of oilseeds, importance has been given to methods of oil quality evaluation including fatty acid profile. Antinutrients especially aflatoxins, glucosinolates, ricin, oxalate, phytic acid, oligosaccharides, etc. also find a place. Analytical methods of some vitamins and minerals have also been included. Only a few important and most essential procedures relating to oilseed quality have been presented. The analyst can find more details and methods of evaluation of other constituents in standard laboratory analytical manuals.

Antinutrients

Safety is the most important aspect among all the quality attributes of food. Food can be considered safe, only if it does not contain any factor which is hazardous to human or even animal health. The various factors which affect the safety of the foods may be broadly classified into three categories. The first category includes the toxic factors occurring naturally in foods. The second category comprises a group of incidental contaminants which find their way at various stages of processing, manufacture, preservation and storage of foods and the third category includes harmful intentional additives or adulterants.

Various categories of anti-nutritional factors are present in the traditional and non-traditional oilseeds, oils and oilcakes. Some of them are heat-labile and do not pose any harmful effects in the body, while the heat-stable factors may cause deleterious effects in human beings and animals. They belong to different groups of compounds. It is necessary to know their behaviour, significance and toxicities. Their avoidance or elimination is important to protect human and animal health.