eChapters

Introduction Insects are the largest group of individuals in the phylum Arthropoda. They are the most dominant species on earth, as they originated 480 million years ago. Insects account for damage to agriculture produced through pest incidence; they also render benefits through pollination services, reduction in pest population as natural enemies, and various other services. Utilisation of beneficial insects like silkworms, honeybees, and lac insects for their products was well known to Indian people way back. In the current chapter, opportunities for the utilisation of some of these beneficial insects for emerging businesses are discussed.

Insect farming

By 2050, there will be a 60% increase in the global need for proteins, driven by the unrelenting growth of the human population. What is very disturbing is that present protein manufacturing uses very unsustainable methods, in addition to this exponential increase. The ecosystem is under a lot of stress from traditional farming practices, which also contribute to the loss of already depleted wild fish species and water supplies. By 2050, there will be 10 billion people on the planet, and to feed them sustainably, new farming options such as insect farming will be necessary. Due to their rapid rates of reproduction and high protein content, insects are extremely simple to produce (Igini, 2022).

Introduction

Functional food or medicinal food is any healthy food claimed to have a health-promoting or disease-preventing property beyond the basic function of supplying nutrients. The general category of functional foods includes processed food or foods fortified with health-promoting additives, like “vitamin-enriched” products. Fermented foods with live cultures are considered as functional foods with probiotic benefits. Functional foods are an emerging field in food science due to their increasing popularity with health-conscious consumers. The term was first used in Japan in the 1980s where there is a government approval process for functional foods called Foods for Specified Health Use (FOSHU) (Benkouider, 2005).

Distinguishing functional foods from dietary supplements and natural or herbal medicine is especially difficult, and cultural perceptions on this vary. Further complications are the large number of terms often used interchangeably and in a confusing manner such as health foods, nutraceuticals, designer foods, pharmafoods, and so forth. Much of the basic fortification (such as iodization of table salt) is no longer considered “Functional food” but new specialized extracts and ingredients for functional food fortification have emerged, including dietary fibres, plant sterols and probiotics. There is growing research on the potential of biotechnology to develop functional foods for improved health effects of the staple foods in developing countries—for example, high-iron rice, high-vitamin A rice, improved oil content in oil crops, and improved protein.

4.1 Introduction

Apart from an optical source, the optical detector is another important component of the optical fiber sensor. The optical detector converts the optical signal to an electrical one. The signal is then processed either to record or display. There are various kinds of optical detectors but the commonly used in sensors are semiconductor diodes. In some of the cases photomultiplier tube has been used. In this chapter we shall describe the basic principles of optical detectors and their operational characteristics.

1.1 Introduction

Since 1990s optoelectronics and fiber optics technology underwent significant advances due to innovations in the telecommunications, semiconductor and consumer electronics sectors. The developments of compact disk (CD) players, laser printers and the high performance and reliable optical fiber communication are the result of these advances. The optical fiber sensor technology is a direct outgrowth of the revolutions taken place in optoelectronics and fiber optic communication industries. Many of the components associated with these industries are used for optical fiber sensor applications. In the beginning the main hurdle in the development of sensors was the cost of components such as optical sources and detectors. With the time, components prices are falling and the improvements in fiber, laser and photodetector technology have taken place. It is expected that as the time progresses the optical fiber sensors will replace the conventional devices for the measurements of various physical, chemical and biological parameters such as rotation, acceleration, electric and magnetic fields, temperature, pressure, acoustics, vibration, position, strain, humidity, viscosity, pH, glucose, heavy metals, gases, viral infection, pollutants etc.

Abstract

Quality assessment of fruits and vegetable before marketing and processing is an essential task. Various destructive and non-destructive methods have been investigated to achieve this goal. Among the several prevalent noninvasive methods, optical properties measurement methods also promotes for nondestructive quality inspection of fruits and vegetables. The optical properties of biological tissue are, therefore, very importance important for getting sample information and data quantification of the inside of the material. The main goal of this chapter is, thus, to introduce fundamental concept of optical properties, its principle and application in fruits and vegetables. The discussion of electromagnetic radiation for better understanding of the nature of light has also been explored.

3.1 Introduction

Optical sources are a key element in many fiber optic systems. This component converts the electrical signal into a corresponding light signal that can be injected into the fiber. Several factors such as wavelength, source output and spectral bandwidth are important when selecting light source to achieve the best performance of the sensor. The optical sources used for sensors range from hot filament lamps to semiconductor lasers. These sources can be placed into two groups - incoherent and coherent sources. The tungsten lamp and light-emitting diode (LED) are some of the incoherent sources while the lasers come in the category of coherent sources. The LED is normally preferred if the multimode fiber is used for the sensor. If the optical power requirement is high then the laser with multimode optical fiber is used. For the sensors based on interference phenomenon, coherent sources with single mode fibers are used. In the case of distributed sensing, short pulse high power lasers are used. In a laboratory demonstration experiment, a visible laser such as a simple He-Ne laser may be the preferred source while in commercial applications a compact and rugged source such as laser diode or an LED is preferred. Before using the source it is very essential to know its maximum power output, wavelength of emission, linewidth, radiation pattern and modulation bandwidth. The purpose of this chapter is to provide the physics of some of the light sources and their important operating characteristics that are used in sensors.

3.1 Introduction

Energy comes in many forms like chemical, radiant, mechanical, electrical, nuclear etc and can transform from one type to another. Energy can also be transferred or moved from one object to another. Electromagnetic (EM) radiation is a form of energy that can take many forms, such as radio waves, microwaves, X-rays and gamma rays even sunlight is also a form of EM energy. Visible light is a small portion of the EM spectrum, which contains a broad range of electromagnetic wavelengths.

Electromagnetic waves, a self –propagating transverse radiation, are created when an atomic particle, such as an electron, is accelerated by an electric field, causing it to move. The movement produces oscillating electric and magnetic fields. The electric and the magnetic components of the wave are perpendicular to each other and also perpendicular to the direction in which wave is travelling in a bundle of light energy called a photon. Photons travel in harmonic waves at the fastest speed possible in the universe: 186,282 miles per second (299,792,458 meters per second) in a vacuum, also known as the speed of light. There are three important characteristics of the electromagnetic radiation, its frequency, amplitude and speed (Figure 3.1).

ABSTRACT

In vitro pollination and fertilization could be a tool for heterosis breeding of triploid turmeric cultivars, which are almost non-seed setting naturally. Investigations were undertaken to optimize media combinations for the development of in vitro pollinated ovules to mature seed .The half strength MS medium supplemented with auxins and cytokinins was superior to full strength MS. The supplementation of ½ strength MS medium with either auxins or cytokinins at lower concentrations induced some ovule development. The ovule development was more when auxins and cytokinins together were given. The combination of ½ MS +3% sucrose +NAA 0.5mg l ^-1 +BAP 1mg l^-1 showed maximum ovule swelling in cultures. The combinations of BAP 4mg l^-1 with IAA 0.2mg l^-1 produced callusing instead of ovule swelling.

Cellulose is a homopolymer of β (1–4) glucose linkage. It is the most abundant polymer present on the surface of the earth, which is mainly produced by the vascular plants (Sharma et al., 2019; Dayal et al., 2013; Sheykhnazari et al., 2011). Cellulose obtained from higher vascular plants has been employed for making textile and papers.

Abstract

The landslides have become the fast spreading disaster all over the Indian sub-continent. As such landslides were mostly occurring in the Mighty Himalayan Mountains, it was all along attributed to active tectonics. But when it started occurring in most of the mountain belts of India, various geological parameters, the anthropogenic phenomenon and rain fall were inferred to be the main causes for the landslides. Hence when this concept emerged, and again the Remote Sensing and the GIS technologies have phenomenally evolved, different types of variables, again on different resolutions and different methodologies have been adopted to prepare landslide vulnerability maps and this has started yielding varying types of outputs. As the landslide vulnerability zonation mapping (LVZ) is the first step in landslide studies it is essential to evolve a suitable methodology for the same. So the present study was carried out in a test site of around 300 sq.km in between Coonoor and Otacamund, Nilgiri mountains, Western Ghats, South India. In the said study, a set of 12 Earth System Parameters/Variables which could contribute to landslide vulnerability were prepared as GIS raster databases from the data interpreted from satellite MSS data and field geological and geophysical data sets. Similar GIS database was generated on 144 landslides. These landslides were superposed over such 12 Earth system parameters data and landslide vulnerability weightages were assigned to each subvariables of these Earth system parameters. In assigning weightages using such landslide incidence data various methods viz; slope, integrated terrain, information value, weight of evidence, index overlay and BIS methods were used and landslide vulnerability zonation maps were prepared adding all the 12 weightages assigned Earth system variables. In this, all the 12 earth system parameters were having same resolutions. Then the outputs were compared which revealed that the information value method is the best suited method for LVZ mapping followed by weight of evidence method.

Antimicrobial drugs are important medicines which are continuously developed and evolveddue to the phenomenon of development of antimicrobial resistance to antimicrobial agents by microorganisms since the discovery of Penicillin by Sir Alexander Fleming in 1928-29. It has become essential for both pharmacologists and clinicians to optimize the certain principles of pharmacokinetic-pharmacodynamic aspects in both development of new antimicrobial drugs and in getting better therapeutic outcome in actual clinical situations in the field conditions to overcome the challenge thrown by microorganisms to the mankind.

Pharmacokinetics (PK) describes the relationship between the dose of any drug given and the resulting concentration in the body. It includes the physiological process of absorption, distribution, metabolism and elimination whereas Pharmacodynamics (PD) describes the interaction between the drug concentration and pharmacological/therapeutic effect in vivo. It is determined as a definite concentration of a drugand its ability to kill or inhibit the cultured pathogenic microorganismin vitro that is aptly described asminimum inhibitory concentration (MIC) in case of antimicrobial drugs.

Introduction

Agriculture ranks as the second-largest contributor to greenhouse gas emissions, accounting for 20% of the total, following the energy sector. Converting the agricultural waste from trash to treasure is very challenging issue for the researchers/scientists. The practice of indiscriminate dumping and burning crop residue poses serious human and environmental health risks and threatens food and energy security (Singh and Chauhan, 2022). Addressing crop residue burning requires strong technological interventions and policy support due to factors like labour scarcity, lack of appropriate technology and most important the short window of 15-20 days between harvesting and the next crop sowing. On-field burning not only degrades the environment but also leads to the loss of valuable nutrient content in crop residue. Agri-waste burning constitutes approximately 25% of total agri-biomass production globally, underscoring the urgent need to find economically viable alternatives to mitigate this issue and curb outdoor degradation. The scientific community is increasingly focusing on valorizing lignocellulosic-based agricultural waste for biofuel generation and industrial enzyme production. Given the pressing concerns regarding energy use and environmental degradation, there is a growing imperative to transition from non-renewable to renewable energy sources. Renewable energy has the potential to satisfy a significant portion of global energy demand by 2050. Leveraging lignocellulosic waste from agricultural systems is crucial for renewable energy generation and environmental sustainability. Agri-waste, composed mainly of cellulose, hemicellulose, and lignin, boasts high energy conversion efficiency compared to fossil fuel-based technologies. Effective agri-waste management techniques can address energy security and greenhouse gas emissions issues (Varjani et al., 2022). The sheer volume of agricultural residue globally, equivalent to around 50 billion tons of oil, highlights the substantial potential of agricultural biomass for energy production. Similarly, composting agri-waste offers an eco-friendly alternative to energy-intensive inorganic fertilizers, promoting sustainable agricultural crop production. Retaining or incorporating agri-waste into soil can enhance soil fertility and crop productivity (Yadav et al., 2019). Moreover, due to its diverse biochemical composition, agri-waste holds promise for various industrial applications.

Immunohistochemistry (IHC) is a vital research technique that employs labeled antibodies to identify and locate antigens in tissue sections. It has recently gained widespread popularity in anatomic pathology research globally. This method combines immunological, histological, and biochemical approaches to detect specific antigens using antibodies designed for those antigens. Antigen-antibody reactions are visualized through various methods under a microscope. When this technique is applied to individual cells or involves labeling at the electron microscopic level (using the immunogold technique), it is called immunocytochemistry (ICC). The overall process of performing immunohistochemistry or immunocytochemistry is known as ‘immunolabeling.’
Basic Principle of Immunohistochemistry
Antibodies are crucial in triggering an immune response by precisely recognizing and binding to foreign molecules. This specific interaction between an antibody and an antigen leads to the formation of an antibodyantigen complex, which is fundamental to immune reactions. This principle forms the cornerstone of immunohistochemistry.

This innovation introduces a system aimed at enhancing the nutritional quality of fried fish through the integration of artificial intelligence. This system consists of three fundamental elements: a microcontroller, a stainless steel probe featuring a temperature sensor, and an oil-level detection sensor. Additionally, it includes a mobile application powered by artificial intelligence, facilitating the evaluation of the polyunsaturated fatty acid to saturated fatty acid ratio and the index of atherogenicity profile of fried fish. The data collected by the microcontroller undergo thorough processing using an artificial neural network model, along with meta-heuristic optimization techniques such as genetic algorithms and particle swarm optimization (PSO). This processing led to the determination of the PUFA/ SFA and IA profiles of fried fish. Upon alignment of the derived data with the predetermined ideal PUFA/SFA and IA values stored in the application database, the application transmits this information to the system, triggering an alert through the integration of a buzzer within the device.

Interactions of different chemical components affect water quality in shrimp ponds.

7.1 Introduction

The practice of rainwater storage in the pond is quite common but still there is a need to improve its design. Most of the ponds used for rainwater storage are designed on thumb rule: either they are under or over designed. An over designed farm pond can meet the supplemental irrigation needs of the crop but it may not be economical. On the other hand, an under designed pond though economical, may not be able to meet the irrigation needs of the crops at all times. It is reported that in some case up to 20% of the farm area is used for construction of farm pond. These farm ponds are found not to be optimal. Although these ponds are able to meet the crop water demand at most of the stress periods, but considering the economics, they are observed not to be optimal. The big size farm ponds need large areas to be wasted for the digging of the structures. They need huge investment for their construction and lining. Hence, proper scientific studies are needed so that its storage becomes adequate to save the crops from the adverse effects of the drought in monsoon and to assure the possibility of growing a second crop in the winter and at the same time, it is economical also. Simulation studies by daily water balance models of both the crop field and the pond help to understand the availability of water in the pond to meet the supplemental irrigation demand of the crops.

Agriculture, the cornerstone of human civilization, is intrinsically linked to weather and climate. The success of crop production hinges significantly on the prevailing meteorological conditions, which dictate every stage of a plant’s life cycle, from germination and emergence to growth, flowering, and ultimately, yield. Understanding the intricate relationship between weather elements and specific crop requirements is paramount for maximizing agricultural productivity, ensuring food security, and developing resilient farming systems in the face of a changing climate. This chapter delves into the critical role that various weather parameters play in shaping crop performance. We will explore how factors such as temperature, precipitation (rainfall), sunlight (solar radiation, intensity, duration, and quality), humidity, and wind velocity interact to create the ideal environment for different crops. While plants possess an inherent adaptability, each crop species, and often even individual cultivars, has a specific range of “cardinal temperatures” (minimum, optimum

Maintaining your dog’s oral hygiene is crucial for their overall health and happiness. Dental issues can lead to pain, infection and even systemic health problems affecting vital organs. This comprehensive guide delves deeper into the importance of oral care, step-by-step techniques for cleaning your dog’s teeth, signs of dental issues and tips for maintaining optimal oral health.

Importance of Oral Care

1. Preventing Periodontal Disease

Stages of Periodontal Disease: This common dental issue progresses through stages, starting with gingivitis (inflammation of the gums) and advancing to periodontitis, where the supporting structures of the teeth are damaged. Untreated periodontal disease can lead to tooth loss and infections that can spread to different tissues including gastrointestinal tract, liver, heart and kidneys.

2. Avoiding Bad Breath (Halitosis)

Causes: Bad breath is primarily caused by microbial buildup in the mouth due to poor oral hygiene. Persistent bad breath can be a sign of more serious dental problems.

Basics of effective oral presentation : Planning , preparing (Introduction, Body and conclusion), Delivery, Body language and Handling anxiety-Strategies for giving oral presentation

Oral presentation means delivering an address to a public audience. It also refers to public speaking and/or speech-making. It is a brief discussion of a defined topic delivered to a public audience in order to impart knowledge or to stimulate discussion. The skill in oral presentation is equally as important as effective writing. Almost every oral presentation contains an introduction, main body and conclusion like a short paper. Though it is a formal speech in nature or vocal performance to an audience, it may occasionally require adequate planning and thorough preparation in using one’s voice, body language and visual aids such as slideshows to present and illustrate the points more effectively and to achieve the desired results.

Body languages such as eye contact, facial expression, posture and gesture plays a significant role in oral presentation process. The proper use of the voice and the ability to adjust it to suit the slightest differences of meaning are also very important in oral presentation. In addition to correct pronunciation, variation in pitch and cadence, free from speech mannerism, fluency in delivery are also very important in oral presentation.

Objectives
• To understand the fundamental elements of preparing and delivering an effective oral presentation.
• To explore techniques for organizing content logically and engaging theaudience effectively.
• To learn practical tips for improving articulation, delivery, and body language during presentations.
• To identify strategies for using visual aids and technology to enhance presentations.
• To develop confidence and professionalism in diverse public speaking scenarios.
Introduction
Oral presentations are an integral part of professional domains, including business, technical, scientific, industrial, and managerial fields. They involve delivering specialized information on a specific topic to a relatively small yet knowledgeable audience. As a student, you may present findings from advanced studies, research, or project proposals to peers and teachers. As a professional, you might present technical, business, or scientific data to colleagues, explain policy changes to employees, or deliver papers at conferences and seminars. The need for oral presentations grows as one progresses in their career, making it essential to hone these skills early.