eChapters

Introduction

India’s population is projected to be around 1,350 million by 2020 AD which requires food grain production of 343 million tonnes. Considering the current food grain production levels, India needs to raise food grain growth by not less than 4 percent. On the other hand the available per capita cultivable land has declined from 0.48 ha to 0.14 ha and by 2050 it may further decline to 0.07 ha i.e. for every 14 persons only one ha land will be available to produce all essential items like food, fiber, fuel, fodder, fruits etc. (Harshal et al., 2006). About 75 percent of 105 million farm families belong to small and marginal farmers with less than 2 ha and 40 percent of the rural population lives below poverty line. We often talk about self-sufficiency in food supply but the fact is that population living below poverty line does not have the purchasing power.

Atmosphere serves as the medium through which pollutants are transported and dispersed. While being transported, the pollutants undergo chemical reactions, which may be lethal or scavenged by chemical or physical process/method. But it all exclusively depends upon the meteorological conditions (Lee et .al, 1994). Historic air pollution episodes reveal that atmospheric conditions influence the pollutant concentrations as well as their toxicity (Goldsmith & Friberg, 1976; Wichmann et.al, 1989 and Pope et.al, 1992). However, the location, duration of release, height as well as the pollutant concentrations are also important, which effect the secondary pollutant transformation under the influence of meteorological conditions, but the atmospheric behavior is independent of their sources (Holzworth, 1974).

Abstract

The Mesozoic sediments contribute around 54% of the oil and 44% of the gas reserves of the world (Bois et al. 1982). Indian Mesozoic basins occupy an area of about 400 x 103 sq. km and are characterized as frontier basins under category II - IV. These basins are mostly overlain by the Deccan Traps of Late Cretaceous age and are least explored. Deccan Syneclise is one of the largest Mesozoic basins in India, covering an area of ~ 273 x 103 sq. km. Geophysical studies have inferred hidden sub-trappean Mesozoic sediments with thickness up to 2.5 km. It is considered that requisite heat generation due to Deccan Trap volcanism soon after the Cretaceous sedimentation may have acted as a catalyst in hydrocarbon generation. Surface geochemical prospecting surveys along with carbon isotopic studies have been used to assess hydrocarbon generation potential of this part of the basin. The area adjoining Nandurbar beneath Narmada-Tapti region of Deccan Syneclise was selected for geochemical studies where geophysical studies have shown considerable sediment thickness. Surface geochemical studies indicate the generation of light gaseous hydrocarbons, C1 and SC2+ in the range of 3 to 1187 ppb and 1 to 1449 ppb, respectively. The carbon isotopic signatures of selected soil gas samples dC13 CH4 in the range of - 24 to -39.4‰ PDB) suggest thermogenic origin

Abstract

The control of micronutrient deficiency is a realizable goal, notwithstanding the magnitude of the task, challenges and constraints that need to be resolved. Since wheat products particularly maida and atta form the major raw material in widely consumed food items like chapati, bread and biscuit. Fortification of flour as followed in many other countries could be an important strategy to help realize this goal. The technology of flour fortification is effective and cost affordable. Effective flour fortification program would require collaboration between scientific community, governmental and non-governmental agencies, and industry and consumer groups.

Genus : Prunus / Amygdalus
Species :  dulcis L. communis, Fritsch.
Family : Rosaceae
Chromosome No. : 2n = 28

Almond tree amongst the deciduous temperate fruits is the first crop to bloom in spring as it responds readily to warm temperature and also for its relatively low chilling requirements. The almond is thought to be one of the oldest nut crop used by man since very long.  However, its specific climatic requirements have greatly restricted its commercial production to limited regions of the world.  The almond blossoms are large attractive pink coloured very sensitive to spring frost, but at the same time the nut require high heat quantum at maturity, cool rainy weather during flowering restricts cross pollination and induces fungal infections. In the mild winter regions almond trees are limited by the fact that distinct chilling requirement for growth and flowering are not met with.

1. Introduction

Ornamentals include plants which have either attractive foliage or flowers. They are used for various purposes like bedding plants in the garden or as cut-flowers and have huge commercial importance in terms of nursery business. New cultivars of ornamentals, which have been developed by various plant improvement techniques (hybridization, mutation breeding and colchiploidy) are always an added attraction to the plant lovers and a highly prized commodity for commercialization.

New cultivars of ornamentals usually inherit characters of both the parents singly or in combination and produce an entirely new trait. The progenies, thus, express a range of phenotypic characters. One has to screen these plants and identify elite plant(s) having desired phenotypic characters.

Second part of this process is characterization of the selected plants. Various characters of these plants are studied as per laid down procedures, which include vegetative, floral, seed and rhizome characters. The recorded observations are then compared with the parental characters to establish their distinctiveness. Subsequently, these plants are subjected to field trials for studying their uniformity and stability of the desired phenotypic characters.

New cultivars of ornamentals have enough potential for commercialization and good source of earning on the part of breeders who may be farmers, nurseryman, and researchers. However, for claiming right over the new cultivars developed, it is now mandatory to get those new varieties registered with appropriate agencies. The registration authorities ask for every morphological details as well as parental history. Therefore, characterization is a must for the newly developed cultivars/varieties.

ABSTRACT

Piper colubrinum is a wild relative of the cultivated species of black pepper, Piper nigrum. The enzyme hydroxy methyl glutaryl Co A reductase which catalyses mevalonate synthesis, is the key enzyme in isoprenoid biosynthesis.This is the rate limiting step in the pathway which leads to the formation of sesquiterpene phytoalecins, a group of plant defense metabolites. Piper colubrinum is known to be tolerant to the dreaded disease called foot rot, incited by Phytophthora capsici. The hmgr gene is reported to confer resistance to fungal pathogens. Hence we made an attempt to isolate gene encoding this enzyme. cDNA was synthesised by reverse transcription from total RNA of P.colubrinum using oligo dt primers. Specific degenerate primers designed based on the conserved boxes among various plant species were used for amplifying hmgr gene from the cDNA. The 700 bp amplicon was cloned in pGEMT vector and sequenced with T7 primer. Multiple sequence alignment using clustal W 1.8 revealed homology of the cDNA fragment with hmgr genes in several other plant species. Maximum similarity was observed among P. colubrinum, Solanum xanthocarpum and Nicotiana tabacum. The cDNA library of P. colubrinum constructed in lTriplEx2 when screened with radiolabelled hmgr amplicon, yielded positive signals. Attempts are being made to isolate full length gene from these clones, which could be later used for imparting biotic stress tolerance to cultivated crop species.

6.1. Downy mildew of Sugarcane

Pathogen: Sugarcane downy mildew can be caused by four species:

    1)    Peronosclerospora sacchari
    2)    P. miscanthi
    3)    P. spontanea and
    4)    P. philippinensis

Major Host
Hosts in the Saccharum genus include: S. officinarum, S. robustum, S. spontaneum and S. edule.

Minor Host
Other hosts include Zea mays (maize), teosinte (Euchlaena mexicana), Sorghum halapense (Johnson grass), S. sudanense (Sudan grass), Tripsacum dactyloides (Gama grass), Sorghum bicolor (broom corn). Other studies suggest there are 18 species that are systemically infected in the sub-family Panicoideae; these include species of Andropogon, Bothriochloa, Eulalia, Schizachyrium and Sorghum (Bonde & Peterson 1981)

Geographic Distribution
The disease is restricted to the Pacific, South Asia and South East Asian regions viz Fiji, India, Indonesia, Japan, Papua New Guinea, Philippines, Taiwan and Thailand (Suma & Magarey 2000).

18.1 Library Introduction

This library contains modules for various types of functionalities. Some commonly use module of python standard library are:

(i) math module: which provides mathematical function to support difference types of calaculations.

(ii) cmath modules: which provides mathematical function for complex number.

(iii) random module: which provides function generation random number.

(iv) staticstics module: which provides mathematical satical function.

(v) urllib module: which provides URL handling function so that you can access websites from within your program.

1. NmPy library, provides some advance math functionalities along with tools to create and manipulate numeric arrays.

2. Scipy library, provides algorithmic and mathematical tools for scientific calculations.

Recurrent selection is a method of breeding applicable to cross-pollinated crops, designed to concentrate favourable genes scattered among a number of individuals by selecting in each generation among the progeny produced by mating inter se of the selected individuals (or their selfed progeny) of the previous generation. The concept of recurrent selection grew out of need to increase the number of superior genotypes that could be obtained from breeding stock of corn. This could have been possible by increasing the frequency of superior genes in the gene pool and by increasing the chances for genetic recombination to occur. The original idea behind recurrent selection was proposed first by Hayes and Gerber in 1919 and independently by East and Jones in 1920. Jenkins (1940) was the first to describe the method in detail and Hull (1945) proposed the name ‘recurrent selection’. Each cycle of recurrent selection requires:

23.1 Introduction

Eggs are nutrient dense superfoods, naturally occurring vitamin pills. They contain a complete source of protein with all essential aminoacids and naturally occurring vitamin D. The adverse publicity of high cholesterol content in the egg limit their intake. Nowadays consumers need the products free from drugs/ pesticides and contain special health promoting substances. To reap the growing demand of health conscious consumers and to make available of their requirements, designer eggs are made. Designer eggs are those eggs their composition differ from the standard eggs by changing the feed of the hen.

Homeopathic Prescription

A basis for homeopathic prescription involves identifying all the aspects of the case (detailed questioning to get the history in respect to animal, its behavior, its nutrition and management, vaccination and deworming status, past and present illness etc.), objective investigations (instrumental and laboratory), coupled with an overview of the picture and dynamics of the patient (it is more philosophical and subjective).

In recording symptoms (both present and past), special attention is to be paid to peculiar symptoms, mental state and generalities. Then appropriate remedy is selected through a process called “reportization”. After selecting an appropriate remedy, its correct potency is determined. Selection of the potency depends on the strength of vital force of the ailing individual, degree and extent of physical pathology and disease chronicity (Hahnemann,1994). Higher potency is selected if vital force is strong. For example higher potency are more suitable for young and growing animals. If tissue pathology is more, lower potency drug is advisable. The effect of higher potency drugs is for greater period of time. Effect of 1M potency may last for a month while that of 30C potency may last for a week. If pathology is not severe, 200C potency may be selected. In case pathology is significant, potency below 200C may be chosen. For weak and emaciated animals, potency 30C or below is advisable. Clear cut cases with strong mental symptoms are right candidates for high potency. Unclear case should be given low potency drug (Pitcairn, 1992). As soon as relief is observed, the drug administration should be stopped. Overmedication is the great error in homeopathic prescribing. In homeopathic prescribing, number of pillules taken in a single dose is less important. What matters is its potency and frequency.

Radio Pharmaceuticals
Radiopharmaceuticals are a specialized class of drugs that contain radioactive isotopes and are used primarily in the fields of diagnostic imaging and therapeutic interventions in medicine. These agents can either emit radiation themselves or be used to deliver radiation to specific tissues, making them invaluable in diagnosing and treating various medical conditions, particularly cancer.
Definition and Composition
Radiopharmaceuticals consist of three main components: a radioactive molecule, a targeting molecule that selectively binds to specific cells or tissues, and a linker that connects these two components. The radioactive isotopes used in these compounds can emit different types of radiation, including gamma rays, positrons, or alpha particles, depending on their intended use—diagnostic or therapeutic. For instance, diagnostic radiopharmaceuticals are typically designed to emit low-level gamma rays that can be detected by imaging equipment such as positron emission tomography (PET) or single-photon emission computed tomography (SPECT) scanners. Therapeutic radiopharmaceuticals, on the other hand, deliver targeted radiation to destroy cancer cells while minimizing damage to surrounding healthy tissues.
Radiopharmaceuticals: Storage Guidelines
Radiopharmaceuticals are unique medicinal formulations containing radioisotopes that are used for both diagnostic and therapeutic purposes in nuclear medicine. Proper storage of these compounds is essential to ensure safety, maintain their effectiveness, and comply with stringent regulatory requirements. Storage protocols are designed to prevent contamination, minimize radiation exposure, and preserve the chemical stability of the radiopharmaceuticals.

Women are the backbone of rural economy. They play a significant role in domestic and socio-economic life of the society. National development is not possible without developing this important and substantial segment of any society. To achieve anything, women are obliged to surmount host of obstacles. The difficulty in gaining access to land, credit and agricultural inputs hampers their potential as producers who feed the world. Barriers of tradition and discrimination have limited their access towards technology, training and education. Moreover, the extension approaches and strategies usually followed for transfer of technology to women are not keeping match with their specific needs and problems. The World Food Summit convened by FAO in 1996 drew up a plan of action to address the major impediments to universal food security. It also called for the full and equal participation of both the genders so as to ensure gender equality and empowerment of women.

The vast livestock population requires proper harvesting of animal by-products to generate income to the farmers and to provide the employment to marginally educated masses. The density of livestock in our country demands atleast one animal by-product processing plant in each fifty kilometer range. Proper utilization of animal by-products will also serve in reduction of environmental pollution through slaughter house. Ultimately image of the meat industry can be enhanced by proper utilization of animal by-products. The proper disposal of animal slaughter house and by-products waste is further necessary to reduce the environmental pollution and to enhancement the livelihood of neighourers.

Abstract

30 lines were selected from 864 germplasm lines for good biscuit making attributes on the basis of low protein content (<10.5%) and low sedimentation value (<40cc). These lines were further screened by actual baking test and alkaline water retention capacity (AWRC) test keeping the standard prescribed for biscuit making qualities viz., low protein content, low sedimentation value, low AWRC and larger diameter with larger spread ratio of biscuit. AWRC had significant negative correlation with biscuit spread ratio. Positive significant correlation was found between biscuit spread ratio and biscuit diameter. On the basis of above findings, it may be recommended that low protein content, low sedimentation value, low AWRC may be used as criteria for better biscuit making i.e. increase biscuit spread ratio and biscuit diameter. So wheat-breeding programme has opened up new opportunities for the end use quality product and wheat based food industry. Hence there is an urgent need for qualitative analysis of desired traits in wheat towards enhanced value addition and thereby an attempted has been made to identify suitable genotypes possessing good biscuit making attributes

Dairy industry has long dealt with issues of food pathogens and inadvertent adulteration; it is time to review the plant systems with a new perspective. Each plant has its own handling protocols, physical lay-out and employee policies. Milk and other materials entering the facilities, till the distribution of the finished product needs special attention.
 
I. INCOMING MATERIALS

In general, start by considering the milk, food ingredients, packaging, chemicals and other materials that come into plant facility and warehouses, and ensure that these product streams are secure, and that materials are stored in asecure place.

Semen dilution/ extension is done to meet the following objectives

1.    To preserve the fertilizing potential of semen for a long period of time

2.    To increase the number of services per ejaculate. Ideally approximately 500 cows/ buffaloes can be inseminated from diluted/ extended semen of  a single ejaculate.

3.    Extenders provide the spermatozoa with a medium in which they are able to remain viable and fertile for a prolonged time period.

In order to be an ideal extender, it should be able to provide conducive environment to prolong sperm survival and modify the sperm structure to prepare them for freezing through the following properties:

1.    It should be isotonic with blood and should maintain this during preservation.

A. Answer the following question

1.    Writethe two assumptions whicharetaken into consideration during CP estimation of any feedstuff?

Ans: In the feed, a) all N is present as protein and b) All food protein contains 16%nitrogen.

2.    What is protein equivalent?

Ans: It is the arithmetic mean of the percentage of DCP and DTP (digestible true protein).

Abstract

The chapter aims at introducing selected physical properties of food and biological materials in food process and application in the field of food technology. These physical properties of food are not only used for designing of food equipments but can also maintain the nutritive value of food to a greater extent during processing in these equipments.

Introduction

The investigation of food engineering is spotlighted on the inspection of equipments and system used to process food materials on a commercial scale. Building of system for food materials can be efficient if two factors are known, the nature of the food product and what happen to the food during its processing. Food materials are organic in nature and it has a certain kind of qualities which recognize them from other processed food product. Since food materials are organic in nature, they have (a) shapes usually found in normally non regular; (b) properties which differ from other food products; (c) heterogeneous arrangement; (d) properties are varied due to climatic conditions, ripening conditions, etc. and (e) several other factors such as (e) influenced by chemical changes, moisture content variation and enzymatic movement. Managing food materials with these remarkable attributes requires extra thought, for the most part by implication and extra sources or reasons for different varieties. The attributes of a food material that are autonomous of the on looker, quantifiable, can be measured, and characterize the condition of the material (yet not how it accomplished that state) are considered as its physical properties.