eChapters

English name : Black pepper
Botanical name : Piper nigrum L.
Family : Piperaceae
Chromosome number : 2n = 52
Centre of origin : Western Ghats, India
Black of the commerce is the dried mature fruit of the perennial climbing vine of Piper nigrum L. It is one of the oldest and most significant spices in the world. Black pepper refers to the whole dried fruit, which is still unripe, while white pepper is made from the fruit after the mesocarp has been removed. Among all spice crops, pepper holds the highest share in foreign exchange, earning it the title of the “King of Spices.” An analysis of various types of black pepper from Kerala, Karnataka, Tamil Nadu and Assam revealed the following ranges of values: moisture content (8.7-14.1%), total nitrogen (1.55-2.60%), nitrogen in non-volatile ether extract (2.70-4.22%), volatile ether extract (3.0-4.2%), non-volatile ether extract (3.9-11.5%), alcohol extract (4.4-12.0%), starch (28-49%), crude fibre (8.7- 18.0%), crude piperine (2.8-9%), piperine (spectrophotometrically) (1.7- 7.4%), total ash (3.9-5.7%), and acid-insoluble ash (0.03-0.55%). Starch is the principal constituent of pepper, making up 34.8% of black pepper, 56.5% of white pepper, and 63.2% of decorticated white pepper. Pepper starch consists of small, polygonal granules similar to rice but much smaller. The alkaloid piperine (melting point: 29-30°C) is the primary compound responsible for black pepper’s characteristic biting taste. Other pungent alkaloids present in smaller quantities include chavicine, piperidine, and piperetine. 

Introduction
Food Pipe Line refers to a post-harvest system that deals with ensuring the delivery of a crop/commodity from the time and place of harvest to the time and place of consumption, with minimum loss, maximum efficiency, and maximum returns to all concerned including the grower, processors, and consumer. The term ‘system’ represents a dynamic, complex aggregate of logically interconnected functions or operations within a particular sphere of activity. The term pipeline refers to the functional succession of various operations but tends to ignore their complex interactions.
Stages of the post-harvest system
The food commodities broadly undergo different stages/operations of postharvest systems right from harvest to consumption. However, the applicability of different stages varies with the type of crop. Different unit operations involved in the post-harvest system of food commodities are as under:
1. Harvesting
2. Threshing (food grains, pulses and oilseeds)
3. Drying (food grains, pulses and oilseeds)
4. Collection, Sorting, grading, packaging (Horticultural Crops)
5. Transportation and distribution
6. Storage (Godowns, cold stores, CA stores)
7. Processing

Biotechnology Products and Technologies
    
Bottlenecks in Fast Progress of Animal Biotechnology
    
Why Biotechnology should be Used in Animal Husbandry and Dairy Production
    
Contribution of Livestock Sector to Food Basket
    
Biotechnology and Environment
    
Biotechnology of Nutrient Partitioning
    
Genetic Programming for Better Animals
    
Biotechnology of Reproduction
    
Biotechnology of Animal Health

Introduction

Drought is the most important abiotic factor that adversely affect growth and crop production. Drought stress can altered the normal physiological processes that influence one or a combination of biological factors for yield and yield attributing traits (Ashraf, 2010). The abnormal metabolism due to stress may reduce plant growth (Claves et al., 2002). Production is limited by environmental stresses, according to different scholar estimates, only 10 per cent of the world’s arable land is free from stress, in general, a major factor in the difference between yield and potential performance, environmental stresses. Drought is one of the most common environmental stresses that almost 25 per cent of agricultural lands for agricultural farm products in the world are limited (Loresto, 1976; Chaves, 2002). Drought occurrence in India is also very frequent. Drought occurred in past 1967, 1968, 1969, 1972, 1974, 1979, 1987, 2002, 2009 and had considerable impact on food grain production. For example, the drought of 1966-67 reduced overall food grains production by 19%. The drought of 1972-73 reduced the food grains production from 108.95 million tonnes to 95 million tonnes, causing a loss of about $ 400 million $. The 1987 drought in India damaged 58.6 million ha of cropped area affecting 285 million people (Ray et al., 2015). Drought in 2002 has reduced food grains production to 174 million tonnes from 212 million tonnes resulting in decline of 3.2% GDP (Rathore et al., 2009; Ray et al., 2015).

The water deficit reduces crop yield due to decrease in photosynthetic area, decreased radiation use efficiency and harvest index (Earl and Davis, 2003). Drought stress affect the water balance and plant metabolisms. Plants under drought conditions use various changes to tolerate stress conditions and increase drought tolerance which includes changes in whole plant, tissue, at physiological and molecular levels. Appearance of a single or a combination of inherent changes determines the ability of the plant to stand under aridity conditions. Tolerant plant adjusts its water balance by osmotic adjustment, deep root systems and by transient leaf rolling.

Modern farming system was aimed to maximise crop production by use of high yielding crop varieties or hybrids and application of agro-chemicals like fertilisers and pesticides along with irrigation and better crop production technologies. But without consideration of its impact on the environment and economics of the farmers, the monoculture of rice and wheat with agro-chemicals caused land degradation, soil and water contamination, gene erosion and environmental pollution.

Introduction

Soil, a dynamic living matrix, is an essential part of the terrestrial ecosystem. It is a critical resource not only to agricultural production and food security but also to the maintenance of most life processes. Soils contain enormous numbers of diverse living organisms assembled in complex and varied communities ranging from the myriad of invisible microbes, bacteria and fungi to the more familiar macro-fauna such as earthworms and termites. The diversity in soils is several times higher than that above ground. Each hectare top soil contains approximately 1,000 kg of different fungi, 500 kg of bacteria, 750 kg actinomycetes and 150 kg of algae and many protozoa (Table 1). These diverse micro-organisms interact with one another and with the plants and animals in the ecosystem forming a complex system of biological activity. Environmental factors, such as temperature, moisture and acidity, as well as anthropogenic actions, in particular, agricultural practices affect soil biological communities and their functions to different extents. Diversity of soil micro-organisms has emerged in the past decade as a key area of concern for sustainable soil health and crop production. Besides, the well-being and prosperity of earth’s ecological balance, the sustainability of agricultural production systems directly depends on the extent and status of microbial diversity of soil.

Tagetes erecta L. (syn. Tagetes patula L.) (Asteraceae): Eng.- French Marigold; Hindi- Genda / Gule jafre; Kash.- Jaffre / Bata poshe [NI]. A herbaceous annual, naturalized in N W Himalayas and grown for border as well as bedding plant. Both double and single forms are cultivated. Double forms are golden yellow and carnation like

14.1. Introduction

Tomato is grown in India in abundance both in summer and winters. Tomato though botanically a fruit is generally considered as vegetable because of the way in which it is consumed. Fresh tomatoes are very refreshing and appetizing but can not be stored for a long period. During peak season, about 25% of the produce is spoiled due to mishandling and such losses can be avoided by converting tomatoes into different value added products. Tomato can be processed into pulp, paste, puree, juice, ketchup and sauce. In India, tomato sauce and ketchup are very popular. High quality products can be prepared from tomatoes by:

1. Using uniformly ripened, red coloured tomatoes.

2. Avoid prolonged heating and cool the product immediately after cooking.

3. Avoid using iron and copper equipments and utensils at any stage of processing.

English name : Turmeric
Botanical name : Curcuma longa L.
Family : Zingiberaceae
Chromosome number : 2n = 3x= 63
Centre of origin : South East Asia
Turmeric of commerce is the dried rhizomes of Curcuma longa. Cured turmeric contains 5.8% moisture, 8.6% protein, 8.9% fat, 63.0% carbohydrates, 6.9% fibre, 6.8% mineral matter, 0.2% calcium, 0.26% phosphorus, 0.05% iron, 0.01% sodium, 2.5% potassium, 175 IU of vitamin A per 100 g, 0.09 mg of vitamin B1, 0.19 mg of vitamin B2, 49.8 mg of vitamin C, and 4.8 mg of niacin. It provides a calorific value of 390 calories per 100 g. The primary colouring agent in turmeric is curcumin. It is a significant spice, particularly in rice-based cuisines. Curry powder typically contains about 24% turmeric combined with coriander, cumin, cardamom, fenugreek, chillies, ginger, pepper, and dill seeds.

Introduction 
Over the past few decades, magnetic nanoparticles (MNPs) have been showing great importance in the field of organic synthetic reactions, catalysis, sensors, biomedicines, environment rehabilitation, etc. (Gawande, M. B. et al., 2013; Del Rio, M. et al., 2022). Numerous research teams have recognized the significance of solid support materials for the creation of environmentally acceptable nano catalysts with high catalytic activity in light of the infinite advantages of MNPs (Sharma, R. K. et al., 2016; Gawande, M. B. et al., 2013; Deng, J. et al., 2011; Nasrollahzadeh, M. et al., 2015; Hudson, R. et al., 2014; Payra, S. et al., 2017; Chng, L. L. et al., 2013; Parandhaman, T. et al., 2017; Zhang, F. et al., 2014; Pourjavadi, A. et al., 2012). Heterogeneous catalysts in organic chemistry are solid catalysts that, while remaining in a distinct phase (usually solid) from the reactants (generally liquids or gasses), promote chemical reactions without being consumed in the process. These catalysts, which have multiple benefits such as ease of separation, recyclability, and selective reactivity, are essential in a variety of industrial processes and laboratory reactions (Lattuada, M. et al., 2007; Jiang, K. et al., 2011). The standard formula for ferrite nanoparticles is MFe2O4, where M is usually divalent metal ion like copper (Cu), zinc (Zn), or nickel (Ni), and iron (Fe) is the common metal (Kazemi, M. et al., 2018). These nanoparticles work very well as heterogeneous catalysts in a variety of chemical reactions because of their special magnetic and electrical characteristics.Because of its special qualities as a catalyst in a variety of processes, copper ferrite (CuFeO4), a mixed-metal oxide, has drawn interest in organic chemistry (Kharisov, B. I. et al., 2019; Zhu, J. et al., 2014; Vannucci, A. K. et al., 2012). It is a spinel-type ferrite that can catalyse a variety of organic transformations because it combines iron and copper in a stable, highly active structure. With benefits including high stability, reusability, and low toxicity, these catalysts are frequently employed in processes like oxidation, coupling, and reduction (Taghavi Fardood, S. et al., 2018). The Figure 1 represents schematic diagram of a reaction where the ferrite nanoparticles as catalyst have been recovered with the aid of an external magnet after the formation of reaction product.

Effective agricultural extension programmes require systematic planning, scheduling, coordination and monitoring of activities. Programme management techniques provide practical tools for organizing resources and activities so that programme objectives can be achieved within defined time and resource constraints. This chapter introduces important techniques used for planning and managing agricultural development and extension programmes, with particular emphasis on SWOT analysis, bar charts, network techniques, Programme Evaluation and Review Technique (PERT), and Critical Path Method (CPM). SWOT analysis provides a structured approach for examining internal strengths and weaknesses along with external opportunities and threats affecting a programme. Bar charts and Gantt charts assist in presenting activities against time and monitoring programme progress. Network techniques provide a more systematic representation of relationships among programme activities. PERT is particularly useful where activity durations involve uncertainty, while CPM helps identify critical activities, scheduling constraints and opportunities for time and cost optimization. Together, these techniques provide extension professionals with practical methods for programme planning, scheduling, resource utilization, monitoring and management

Introduction

Sustainable development has caught the imagination and action all over the world for more than a decade and sustainable agriculture is necessary to attain the goal of sustainable development. According to the Food and Agriculture Organization (FAO), sustainable agriculture “is the successful management of resources for agriculture to satisfy changing human needs while maintaining or enhancing the quality of environment and conserving natural resources”. All definitions of sustainable agriculture lay great emphasis on maintaining an agriculture growth rate, which can meet the demand for food of all living things without draining the basic resources.

Short Transmission Line

A short transmission line is defined as a transmission line with an effective length less than 80 km (50 miles), or with a voltage less than 69 kV. Unlike medium transmission lines and long transmission lines, the line charging current is negligible, and hence the shunt capacitance can be ignored.

For short length, the shunt capacitance of this type of line is neglected and other parameters like electrical resistance and inductor of these short lines are lumped, hence the equivalent circuit is represented as given below. Let’s draw the vector diagram for this equivalent circuit, taking receiving end current Ir as reference. The sending end and receiving end voltages make angle with that reference receiving end current, of φs and φr , respectively.

Introduction

Plant hormones (also known as phytohormones) are chemicals that regulate plant growth, which are termed ‘plant growth substances’. Plant hormones are signal molecules produced within the plant and occur in extremely low concentrations. Plant hormones are small, simple molecules of diverse chemical composition: indole compounds, terpenes, adenine derivatives, steroids, aliphatic hydrocarbons and derivatives of carotenoids or fatty acids. In the context of rooted habit and iterative mode of growth, plant hormones are not produced in specialized glands, but in most parts of the plants. Plant hormones are required in minicule quantities and their concentrations at sites of activity are precisely regulated. Changes in hormones concentration and tissue sensitivity mediate a whole range of development processes in plants, many of which involve interaction with environmental factors. First five hormones discovered from the plants were gibberellins, abscisic acid, cytokinins, indole-3-acetiv acid, and ethylene as well as some compound shown more recently to have a regulatory role in plant development, namely, brassinosteroids, polyamines, jasmonic acid and salicylic acid.

Abiotic Factors : These are physical, chemical and other non-living components of the environment such as light, temperature, moisture, nutrients and other edaphic factors.
 
Absolute Drought : It is defined as a period of consecutive days none of which had rainfall of 2.5 mm or more OR when actual rainfall is less than twice the mean deviation OR actual rainfall is less than half the normal weekly rainfall.
 
Absolute Growth Rate : The rate of increase in size of a growing plant (or part of it) in a given time under specific growing conditions.

Absolute Humidity : Absolute humidity is defined as the actual mass of water vapour present in the given volume of air. It is measured in grams per cubic meter or in terms of partial pressure of water vapour in air in mb or mm.

Environmental Biotechnology
    
Global Warming and Animal Health and Production
    
Genome Mapping
    
Human Genome
    
Livestock Genomics
    
Cattle Genome
    
Pig Genome
    
Bioinformatics
    
Major Branches of Bioinformatics Include
    
List of Bioinformatics Software Commonly Used in Animal Genomics Research
    
Sequence Analysis Software
    
Genetics Analysis Software
    
Functional Genomics Software
    
Biofuels
    
Advantages of Bioethanol
    
Ecological
    
Economical
    
Looking to the Future: The Potential of Second-Generation Biofuels
    
Future Role of Biofuels Depends on Profitability and New Technologies

Yak (Poephagus grunniens)is the most remarkable and multipurpose domestic animal living at high altitudes of the Himalayas. Features common to the environment in which yak live are extreme cold, mountainous terrain, high altitudes with reduced oxygen in the air, high solar radiation and short growing seasons for herbageanda variable assortment of herbage, sparse insome areas. Generally, the yak habitat ranges from 3000-6000 m abovemean sea level (msl), where the alpine pastures are found and there is no absolutely frost-free period during any part of the year. Wilted herbage provides some sustenance for the yak at other times of year, but not insufficient quantity for their requirements (Fig. 9.1). Many of thecharacteristics of the yak can be regarded as adaptations to these conditions, in which cattle of other species have difficulty in surviving (Wiener et al., 2003).The yaks are considered as the life line of the highlanders in remote terrain because yak is the only sustainable livelihood due to non-availability of arable land for major agriculture. Yak husbandry is one of the important and indispensable aspects of the Indianstates, namely, Arunachal Pradesh, Himachal Pradesh, Jammu and Kashmir, Sikkim and Garhwal hills of Uttarakhand where other livestock species can hardly live but yaks can survive, reproduce and produce milk, meat, wool and other by-products.

The artificial seed production technique was first used in clonal propagation to cultivate somatic embryos placed into an artificial endosperm and constrained by an artificial seed coat. Today artificial seeds represent capsules with a gel envelope, which contains not only somatic embryos but also axillary and apical buds or stem and root segments (Vdovitchenko and Kuzovkina, 2011).

The prime requirements for preparation of artificial seeds are high frequency somatic embryogeniccalli, synchronous embryo development and maximum conversion of embryos into plants. Success in production of synthetic seeds mainly depends on how best callus development and plantlet regeneration are achieved. However, over time the morphogenetic competence of differentiated cultures declines (Lynch and Benson, 1991). Therefore, the primary goal of synthetic seed production is to produce somatic embryos that resemble more closely to the true seed embryo in storage and handling characteristics so that they can be utilized as a unit for clonal propagation and germplasm conservation. Synthetic seeds may be hydrated or dehydrated and may be quiescent or not. Encapsulation of micropropagules enables to satisfy the requirements of synthetic seed development. The gelling agents used for encapsulation for production of synthetic seeds act as protective cover. The encapsulated synthetic seeds also contain growth nutrients, plant growth promoting microorganisms (mycorrhizah, Rhizobium, etc.), and/or other biochemical constituents necessary for optimal embryo-to-plant development (Fig. 4.1). Fungicides may also be used in the liquid gelling medium to protect them during storage and germination in vitro and in vivo.

ELECTROLYTE BALANCE

Electrolytes like sodium, potassium, and chloride are substances that dissolve into posi tively and negatively charged particles when mixed with a liquid. The interaction between these substances, referred to as the ‘dietary electrolyte balance (DEB), can be influenced by either the electrolyte itself or the additional salt source used.

Dietary inclusion of potassium and chloride has shown positive effects on heat-stressed broilers. Among various salt options for broiler diets, sodium bicarbonate and potassium chloride have been identified as the optimal choices, especially during hot summer conditions.

Electrolyte balance is often quantified by the uncomplicated equation Na + K – Cl expressed in terms of mEq/kg of diet. An ideal overall dietary equilibrium ranging from 240 to 260 mEq/kg is generally deemed optimal for normal physiological functioning. The body’s buffering systems play a pivotal role in maintaining a close-to-normal physiological pH, thus preventing deviations in electrolyte levels. The principal function of electrolytes pertains to the regulation of body water and ionic equilibrium. Consequently, the requisites for elements like sodium, potassium, and chloride can’t be viewed in isolation; it’s the collective equilibrium that holds significance. The term “electrolyte balance,” synonymous with acid-base balance, is influenced by three factors:

1. The equilibrium and proportion of these electrolytes in the diet.

2. Endogenous production of acids.

3. The pace of renal clearance.

Evolution of Economics as a Discipline
1. Initially, economics was not a separate subject but a part of politics, ethics, and jurisprudence.
2. The study of economic ideas gained prominence through discussions on wealth, trade, and resource management.
3. Adam Smith’s book, An Inquiry into the Nature and Causes of the Wealth of Nations (1776), established economics as a distinct discipline.
4. Due to his contributions, Adam Smith is regarded as the Father of Economics.
Origin of the Term “Economics”
1. The word Economics is derived from the Greek term “Oikonomikos”:
a) Oikos – Household
b) Nomos – Management
2. Originally, Oikonomikos referred to the management of household affairs.