eChapters

AONLA

Emblica officinalis Gaertn

F: Euphorbiaceae

Aonla is one of the most important minor fruits of Indian origin, which is predicted to be the ‘fruit of the 21^st century’ even though it existed from time immemorial. It is also called as ‘Indian gooseberry’, ‘amla’, ‘nelli’, ‘amlaki’, ‘amali’, ‘ambala’ and ‘amalakamu’ in different parts of India. This species is indigenous to tropical SouthEastern Asia precisely the Central and Southern India. The crop is seen in Sri Lanka, Malaysia and China. In India, aonla is being cultivated on a commercial scale in northern parts comprising Uttar Pradesh, Maharashtra and Gujarat.

Large number of edible fruits exists in tropics and subtropics of world. Many of such fruit species are identified, domesticated and are being utilized for various purposes, though their full potential has not been exploited. There is yet another group of plants producing edible fruits with great potential in different parts of world, which are not at all being grown and utilized by people other than in a very localized manner. Such under and un-utilized fruits are made the subject for detailed study. They are evaluated for their nutritive value, potential uses for other purposes, for possibilities of commercial cultivation in suitable areas and chances for marketing. Since all of them may not be acceptable for fresh consumption as table fruit, product diversification should be thoroughly evaluated to gain popularity for such plants. Practices and techniques employed for utilizing these fruits by local people where these plant species are seen at present can be scientifically and systematically refined for commercial exploitation.

Broad spectrum of agro climatic conditions and diversity in people’s preference for taste offer great chances to identify right fruit to a particular region for commercial cultivation in India. In this context, significance of under and un-utilized fruits for exploiting potentials become more clear. Identification of such plant species in different regions, extend and method of present utilization, nutritive value and pomological significance of the products, specific climatic and cultural requirements for successful growth and development should be documented as first step for exploitation of lesser known fruit species. Some of the under and un-exploited fruit species prevalent in tropical and subtropical conditions are discussed. In addition to this, attempt is made to incorporate an exhaustive list of plant species, which have potential for utilization as fruits and are rarely exploited at present. These are confined to only limited localities where people use produces for various purposes and are in most cases little known to other parts of world.

Abstract

Carbohydrates are the primary product of photosynthesis and key source of energy in plant and therefore play important role in plant growth and development. Plant carbohydrates are classified into two categories structural carbohydrates and Non-structural carbohydrates (NSCs). NSCs are main component of vegetative tissue and inside the cell they are present in plastids, cytosol, apoplast and vacuoles. Starch is the storage carbohydrate and is used in unfavorable condition on other hand soluble sugars support functions like supporting new growth and defense as they are intermediary metabolites, osmolytes, and substrates for transport. Under unfavorable condition carbon assimilation is less than the plant demand and under such condition these NSC act as “food pantry” which allow sessile plants to cope up unfavorable condition. Pattern of NSC accumulation may also differ for canopy/distal branches, stems and roots, depending on how drought has affected transport of NSC within the plant. These NSCs protect plants during desiccation and against freezing damage by stabilizing proteins complexes and membranes. Thus, NSCs are important carbohydrates for the growth and development of plant during normal as well as in stressed condition.

Abstract

Carbon is the backbone for the life of all living beings. Carbohydrates are metabolic currency of plants as they provide building blocks for energy and biomass accumulation. Carbohydrates include both structural and Nonstructural carbohydrates. Structural carbohydrates like cellulose and lignin are long chain molecules for the building of plants reserves and structural support. These are main constituents of plant cell wall, stem, stalks etc. Non-structural carbohydrates (NSC) like monosaccharides, disaccharides, oligosaccharides, polysaccharides, sugar alcohols are important constituents in plants metabolism. The Non-structural carbohydrates (NSC) pool is very important for plant to meet the inadequate carbon requirement under night and stressful conditions. The quantity and distribution ratio of NSC in different tissues is an ecophysiological feature to understand the adaptive strategies of plants. Substrate for biosynthesis of NSC produced from photosynthesis. Sucrose and starch majorly involved in transport, energy metabolism, osmoregulation of plants.

Abstract

Plants store structural carbohydrates (SCs) and Non-structural carbohydrates (NSCs) to buffer source–sink interactions at various phases of growth and under diverse environmental conditions. Structural carbohydrates (cellulose, lignin, hemicelluloses) provide structural integrity to the plant and the Nonstructural carbohydrates (sugars and starch) plays important role in growth, respiration, osmotic regulation, defence and helps in maintaining the carbon balance. Abiotic stresses such as drought, heat, salinity, and lodging etc. restrict the growth and development of plant which culminates into lower yield. Hence, the role of Non-structural carbohydrates needs to be elucidated for achieving desired crop improvement interventions to mitigate the harmful effects of climate change and having sturdy crop system. Improving our understanding of whole-plant sink–source dynamics and further optimising them will have far-reaching consequences in the near future.

Abstract

The current photosynthesis of flag leaf is the most crucial source of assimilates that are essential for grain development in wheat. Translocation of these assimilates from the leaf to grain takes place in the form of sucrose. However, environmental cues that influence assimilate balance between the leaf and the developing grain which act as source and sink respectively determine grain yield prospects of wheat. The assimilate translocation system that links source and sink can also play a significant role. Hence, this aspect of assimilate supply has been a focus of research over the past few decades for crop improvement particularly under abiotic stress environment that tend to alter source-sink balance by impairing physiological and developmental processes in plants. Grain growth is mainly triggered when the primary assimilates meet the metabolic needs of the developing grains through the current photosynthesis or through assimilates stored in the form of Non-structural carbohydrates in stem. Hence, the improvement of photosynthetic capacity to synthesize sucrose, its storage remobilization, and utilization becomes imperative under abiotic stresses. Various aspects of Non-structural carbohydrates in wheat stem have been estimated, and efforts have been made to reveal the mechanisms of assimilate partitioning. In this context this chapter discusses strategies to improve grain yield with greater insights into the photosynthetic carbon assimilation, the pathways actively involved in the transport of sucrose from source to sink and their utilization at the sink organ. The information related to assimilate supply to the developing wheat grain under high temperature and drought stress conditions can provide opportunities to translate this knowledge into traits for improvement of climate resilience in wheat.

Abstract

Global consumption of wheat during 2021/2022 marketing year reached to 787.4 million metric tons (https://www.statista.com/aboutus/our-researchcommitment/1239/m-shahbandeh). It shows about 4.4 million metric tons increase from the previous year. With the increase in population a significant increase in wheat production is needed to feed 9.7 billion mouths by 2050. A very limited effort can be directed to increase area under wheat production. Diseases and pests of wheat cause significant reduction (>30%) in production and 11-15% of total post-harvest losses of food grains were reported in India, which equates to about 20 million tonne (Basavaraja et al. 2007) and more than AUD10 million per year (Singh 2010). Thus, saving wheat from diseases can significantly contribute to the 2050 food security goal.

Abstract

Wheat rusts, caused by Puccinia spp., are one of the major constraints for sustained wheat production. Significant progress has been achieved in the management of wheat rusts and understanding of wheat-Puccinia host-pathogen systems. The key research frontiers of wheat rusts research comprised disease epidemiology, the discovery of novel sources of resistance and their transfer into superior cultivars, pathogen surveillance for monitoring the virulence profiles of variants of rust pathogens, and the application of genomic technologies in cereal rust research. This chapter gives an overview of the research and development outcomes achieved to minimize the yield losses caused by wheat rusts during the last 90 years in the Indian subcontinent. Wheat rusts have been mainly controlled via genetic means; however, an integrated approach by combing the fungicides was carefully considered when needed. All efforts of managing wheat rusts in the future must cover the identification and transfer of genetically diverse rust-resistance sources with a reputation of durability into agronomically superior genotypes. The understanding of wheat rusts epidemiology globally and the region-specific virulence pattern of Puccinia spp. should be considered for gene deployment. The next-generation tools such as CRISPR-cas9 and other genome editing approaches are likely to be part of wheat rust management within a few decades.

Abstract

Non-structural carbohydrates are the primary product of photosynthesis in plants. Glucose, fructose, sucrose, and so on are examples of Non-structural carbohydrates (NSC). These are free carbohydrates having a low molecular weight that are involved in the creation of structures. Plants’ principal photosynthetic product, the NSC, is involved in metabolic processes and plays a critical role in plant functional characteristics. In a recent laboratory inter-comparison, NSC concentration measurements had very minor uncertainty due to different extraction and quantification techniques. Different techniques such as High-Performance Liquid Chromatography (HPLC), Gas Chromatography-Mass Spectroscopy (GC-MS), Near Infra-red spectroscopy (NIRS), anion exchange chromatography, chemical approaches such as the Anthorn assay approach, and certain kits are used to detect NSC in plants. This review will cover the methods for measuring NSC in plant tissues and attempting to infer its dynamics, as well as how to apply these tools to go beyond simply monitoring plant carbon connections such as “how much NSC is there and where it is located” to “under what conditions and to what extent is NSC used” to support plant function.

1.1 Introduction
Concentrated milks, like evaporated milk and sweetened condensed milk, serve as practical substitutes for fresh milk in regions where access to it is limited or where transportation and storage are challenging. These products go through specific processing techniques to reduce their water content, thereby improving their shelf life and transportability. Evaporated milk is created by removing water through evaporation and then
sterilizing it to prevent microbial growth. This process results in a thicker consistency and a slightly caramelized flavor due to the heat treatment. On the other hand, sweetened condensed milk is made by adding a significant amount of sucrose to the milk and excluding oxygen, which inhibits microbial growth. This results in a thick, sweet product suitable for various culinary uses. These concentrated milk products are usually packaged in small cans, making them convenient for storage and transportation. However, they are sometimes diluted before consumption with water to resemble the taste and consistency of fresh milk. In regions where even concentrated milks are not easily accessible, alternatives like whole milk powder or recombined milk are used. These alternatives involve dehydrating milk into powder form or reconstituting milk components to create a liquid similar to fresh milk. Innovations in processing and packaging have led to the development of alternative uses for concentrated milks, expanding their versatility beyond traditional applications. These products continue to provide essential dairy
nutrition in areas where fresh milk is scarce or hard to obtain, offering a shelfstable solution to meet dietary needs.

2.1 Introduction
The continuous production of dry milk has become consistently significant within the dairy industry and is expected to continue growing due to its advantageous features. These include improved shelf life, reduced storage
requirements, and lower transportation costs, all of which contribute to favourable economic outcomes.
For example, non-fat dry milk is also known as skim milk powder, dried skim milk, non-fat dry milk solids, or dehydrated skim milk. Similarly, products like dried whole milk, dried cream, and dried buttermilk are often regarded as dried or powdered whole milk, cream, and buttermilk, respectively, based on their specific compositions.
2.2 Types of Dried Powder
1. Nonfat dry milk
2. Dry whole milk
3. Dry buttermilk
4. Dry whey
5. Dry ice cream mix
6. Dry creams (sweet or sour)
7. Dry skim milk vegetable fat products
8. Malted milk Powder
9. Cheese powders (Cheddar, Blue, etc.)
10. Sweetened chocolate flavoured non fat dry milk
11. Coffee creaming products
12. Sodium or Calcium Caseinates
13. Dry high acid milks
14. Partly skim milk powder
15. Infant milk food

3.1 Malted Milk
Malted milk, originating from the ideas of British pharmacist James Horlick in the 19th century, was initially marketed under the name “Diastoid” before being trademarked as “malted milk” in 1887. Although initially targeted
for infants and invalids, its appeal expanded due to its nutritional value, convenience, digestibility, and palatability. Recognized globally for its lightweight, non-perishable nature, and high-calorie content, malted milk is
created by evaporating a mixture of malted barley, wheat flour, and whole milk until it forms a powder.
There aremainly two types of malt powder: diastatic and non-diastatic. Diastatic malt containing enzymes breaking down starch into sugar, aiding in dough rise and crust formation, particularly in bread making. Non-diastatic
malt lacks active enzymes and is primarily utilized for flavor enhancement, commonly in beverages. It may also include sugar, coloring agents, and other additives to improve taste and appearance.
3.2 Malting
Malting is a crucial process employed in treating cereal grains, such as barley, by inducing germination through soaking in water followed by halting the process through drying or heating with hot air. This technique encompasses two main stages: sprouting and kiln-drying. The term “malt” encompasses several products of this process:
1. Malted grains: These are grains, like barley, that have undergone the malting process.
2. Malt sugars: These are sugars, predominantly maltose-rich, derived from malted grains, often utilized in baking, such as baker’s malt.
3. Malted milk products: These include beverages like malted milkshakes, made using malted milk.

4.1 Introduction
Human milk widely acknowledged as the optimal source of nutrition for infants, providing a rich array of components crucial for their growth, repair and development. However, the composition of human milk can vary
significantly within and between feeds, throughout the day, over the course of lactation, and among different mothers and also populations. While this variability is beneficial for infant health and survival, it presents challenges for the management of nutrition of high-risk infants who require precise oversight. The composition of human milk can be altered by factors such as the handling of expressed milk, including how it is stored and pasteurized. Thus, proper management of expressed milk is essential. The recommended practice for infant nutrition is exclusive breastfeeding for the first six months, followed by continued breastfeeding for at least one to two years. Human milk is naturally suited to meet the nutritional needs of infants, providing both nourishment and bioactive compounds that support healthy growth and immunity.
Human milk contains a variety of bioactive components, such as immune cells, anti-infective and anti-inflammatory agents, growth factors, and prebiotics. In contrast to infant formula, which has a fixed nutritional profile, human milk is dynamic and can vary between and within feedings, influenced by maternal factors, environmental conditions, and the methods used for expressing and managing milk.
A thorough understanding of human milk’s composition is vital for effective infant feeding, especially for at-risk infants. It also allows for the assessment of how milk storage and pasteurization may impact its beneficial components. Additionally, some of the bioactive elements in human milk are being studied for their potential use in medical treatments, either as preventive or therapeutic agents.

Experiment No.- 1
AIM
To determine the sucrose content in condensed or evaporated milk using the Lane-Eynon method.
Principle
The Lane-Eynon method is used to measure sucrose in condensed milk by utilizing the reducing properties of sugars. Sucrose, being a non-reducing sugar, is first hydrolyzed into glucose and fructose (reducing sugars). These reducing sugars then react with Fehling’s solution, producing a brick-red precipitate of cuprous oxide (Cu2O) when heated. This allows for the accurate determination of sucrose content after the hydrolysis (inversion) process.
Reactions
• Reaction of Fehling’s Solution
• CuSO4 + NaOH → Cu(OH)2 + Na2SO4
• Cu(OH)2 + Reducing Sugar (RCHO) → Cu2O (brick-red precipitate) + RCOOH
This reaction forms cuprous oxide (Cu2O), a brick-red precipitate. The intensity of this precipitate correlates with the concentration of reducing sugar in the sample, providing a way to determine sucrose content.

RECTAL EXAMINATION

It provides practically all the information required.

It is the simplest, accurate and reliable method with no cost involved.

Things Required

A full arm rubber sleeve with attached glove or disposable plastic glove.
A rubber or plastic apron.
Non-irritant soap or lubricant.

Accurate early diagnosis of pregnancy is essential for successful breeding programme.

Ability is required for successful practice.

Skill is to be developed to indicate the duration within weeks in early and months in late pregnancy.

TRUE ANESTRUS IN A HEIFER OR POST PARTUM COW / BUFFALO

The animal has both ovaries small and inactive

No palpable structures in the ovaries

Animal does not exhibiting estrus signs

CONTRACEPTION DUE TO MISALLIANCE AND TERMINATION OF PREGNANCY IN BITCHES

It is obvious that breeders maintain varieties of breeds but mismating do occur within their own premises and sometimes by unwarranted stray animal.

Misalliance complicates too many other problems.

Incidence of mismating is 15 to 20 percent in canine breeding.

Introduction

Horticulture plays a significant role in Indian Agriculture. It contributes 30% GDP from 11.73 % of its arable land area. India is the second largest producer of both fruits and vegetables in the world (52.85 Mt and 108.20 Mt respectively). Being rich source of carbohydrates, minerals, vitamins and dietary fibres these constitute an important part of our daily diet. The dietary fibres have several direct and indirect advantages. Not only this, fruits and vegetables provide a variety in taste, interest and aesthetic appeal. Their significance in human life is being recognised increasingly in societies with the objective of minimizing the occurrence of the diseases related with an affluent life style.

Ornamental Industry

Floriculture as a multi-billion dollar industry has been undergoing unique revolution in terms of production and marketing of high value ornamentals such as cut flowers, loose flowers, potted and foliage plants there by emerged as fully export oriented activity. Owing to the steady increase in demand of flowers, floriculture has become one of the important commercial businesses in horticulture. Presently, floriculture industry in India has been growing with compound annual growth rate of 25 percent over the past decade (Muthukumaran, 2009). It has been found that commercial floriculture has higher potential per unit area than most of the field crops and therefore, it is a lucrative business. Indian floriculture industry has been shifting from traditional flowers to cut flowers for export purposes.Maharashtra, Karnataka, Andhra Pradesh, Haryana, Tamilnadu, Rajasthan, West Bengal have emerged as major floriculture production areas. The export of floricultural products from India has been on an increase in the past five years due to high demand for floriculture products in importing countries. The estimated total area under floriculture in India is 2,82,000 ha. Tamil Nadu stands first followed by Karnataka and Andhra Pradesh, West Bengal, Maharashtra, Rajasthan, Delhi and Haryana. Approximately 16,57,000 metric tonnes of loose flowers and over 5,20,000 metric tonnes cut flowers are produced in India during 2015-16. Total export of floriculture products is 22,518 MT with value of 479 crores (APEDA, 2015). Major importers of ornamental products from India are USA, Germany, UK, Netherland, and UAE.

Introduction

Fresh fruits and vegetables are known for their nutritional and relishing nature. But, their fast perishability and season wise availability make them unavailable for a longer time. To enjoy and get benefited from their unique taste and nutritional value they are further preserved or converted into some value-added products such as jam, jelly, candies, juices, minimally processed fresh-cut fruits and vegetables, pickles etc. There are techniques which are developed to preserve them while in fresh and also when they are made into value-added products. Some require only one technique and other requires more than one in combination so that the product can be preserved for a longer period and available to maximum population even after their period of production/availability is completed.

Introduction

Packaging is the science, art and technology of enclosing or protecting products for distribution, storage, sale, and use. Packaging also refers to the process of design, evaluation, and production of packages. Packaging may be defined as the art and science which involves preparing the articles for transport, storage display and use. India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. With 38 and 71 million tons of production of fruits and vegetables, India is the second largest producer of fruits and vegetables next to Brazil and China respectively. Apart from the huge value addition and employment involved in these activities, packaging has served the Indian economy by helping preservation of the quality and lengthening the shelf life of innumerable products-ranging from milk and biscuits, to drugs and medicines, processed and semi-processed foods, fruits and vegetables, edible oils, electronic goods etc., besides domestic appliances and industrial machinery and other hardware needing transportation (FAO, 1985).

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

Abstract

Being a great nutrient rich fruit, Dragon fruit has fetched a worldwide attention already and started to emerge as an important cash crop in global market. But the fine tuning between the scheduling of supply and market demand is greatly influenced by postharvest management and storage techniques of the fruit as the fruit has a short storage life. In this review, effect of diversified storage and packaging techniques on the different post harvest quality of fruits viz. fruit firmness, skin colour, its nutritional quality and susceptibility to disease pest during storage is investigated. And it was seen that various alternative and innovative modern techniques such as introduction of  plastic film, plastic crate packaging, modified atmospheric storage, different chemical application and application of edible chitosan coating are proven as effective to extent the durability of storage that widen the room for transport and marketing. Finally it can be said that the advantage of growth in dragon fruit consumption and marketing can be more harnessed through understanding the missing links between harvest and post-harvest handlings and integrating the traditional and modern postharvest approaches.

Introduction

Canning is the general term applied to the process of packaging a food in a container and subjecting it to a thermal process for the purpose of extending its useful life. An optimal thermal process will destroy pathogenic (disease-causing) Bacteria, kill or control spoilage organism present and have mineral impact on the nutritional and physical quality of the food. Although we thing of canning in term of steel or possible aluminium cans, the principle apply equally well to a variety of food containers such as glass jar, plastic and foil laminated pouches, semi rigid plastic tray or bowls, as well as metal cans of any one of several shapes, including cylindrical, oval, oblong or rectangular. The concept of aseptic packaging (sterilizing the food and the container prior to filling and sealing) also follows the same principles.

Geological evidence suggests that the age of the earth is about 4,50,00,00,000 (4.5 billion) years and life began on earth between 0.6 to 1.0 billion years after earth has formed. That is life began on earth some where 4 to 3.5 billion years ago.
The plant kingdom over the globe produce oxygen about 30,00,00,000 (3 million) kg per second which is consumed by the living beings on the earth. Air which is present in the atmosphere is a mechanical mixture of gases. The various gases, solid and liquid particles in the air that envelope the earth are bound to it by the gravitational attraction. This complex content of gases, solid and liquid particles is called atmosphere. The atmosphere extends above the surface of the earth to great heights. There is no sharp boundary between the atmosphere and the outer space. For our convenience, the height of the atmosphere is taken as 1000 km. The lowest one km which is called planetary boundary layer, contains 10 per cent of the mass of the atmosphere. All biological and human activities are confined to this planetary boundary level. The mass of the atmosphere is about 5.6 x 1018 kg (mass of earth is 6 x 1024 kg). The mass of the oceans water is about 1.4 x 1021 kg. This shows that the mass of the oceans is more than 250 times the mass of the atmosphere. The density of the dry air at the earth surface is 1.225 kg/m3 and at an altitude of 5.5 km this drops to 0.66 kg/m3 and at 30 km altitude it is about 0.013 kg/m3.

In climatology, terms “Weather” and “Climate” have different connotations. Weather refers to the state of atmosphere at any given time denoting the short- term variations of atmosphere in terms of temperature, pressure, wind, moisture, cloudiness, precipitation and visibility. Weather is highly variable. It is constantly changing, sometimes from hour to hour and at other times from day to day. The aforementioned properties of the atmosphere are subject to constant change and their state at any time determines the state of the weather. However, weather elements are not separate rather they are closely related with each other.

David I. Blumenstock, an eminent climatologist has defined the weather in more restrictive sense. According to him, weather is the behaviour of the lower atmosphere with particular emphasis on the atmospheric behaviour which affect the lands and oceans and have a marked influence on the organisms that live upon the lands, within the waters of the earth or in the lower air. For the geographer, this definition of weather is more satisfactory. Since, he is interested more in the working of the lower atmosphere which affects the life of man as well as natural environment directly. Thus, we come across a great many varieties of weather covering a wide range of conditions.

The Sun is the primary source of heat to the Earth and its atmosphere. The heat received from other celestial bodies as well as the interior of the Earth is rather too significant. The distance that separates the Earth from the Sun is about 149.0 million km. The diameter of the Sun measures roughly about 1.3824 million km. The surface temperature of the Sun is estimated between 5500^o C and 6100^o C. (or 5762^o K).

The weight of the sun is about 1.9 X 10 30kg. The radius is 6.97 X 10 8 m or the diameter of the sun is 14 X 10 5 km. The mass of the earth is 6 X 10 24 kg, the radius is 6.4 X 10 6 m. The gravitational force of the earth is 9.81m/s². Whereas the sun‘s attractive force is 274m/s². This is 25 times higher than earth’s gravitational force.

The atmospheric pressure is weight of the air which lies vertically above an unit area centered at a point. Normal pressure of air is 1.034/cm².

Pressure is defined as the force per unit area.
At the surface of the earth the atmosphere air exerts a pressure of about 10⁵ Newtons/m² or 10⁵ Pascals, which is called one bar or one atmosphere. Evangelista Torricelli (1608-1647) devised a method for measuring the atmospheric pressure by mercury (Hg) barameter in 1643.

Moisture present in the atmosphere plays a significant role in weather and climate of the region. There are three major components in the atmospheric moisture.

  I. Humidity

 II. Precipitation

III. Evaporation.

Humidity: The terminology related to humidity and concerned with gaseous form of water i.e. water vapour, several expressions of the amount of water vapour in the air is used. They are as follows.

Air Constantly moves from place to place due to pressure differences which are caused by difference in temperature.

Wind has been defined as air in horizontal motion. According to Byers, “The wind is simply air in motion, usually measured only in its horizontal component”. According to Trewaitha, “Wind is simply air moving in a direction which is essentially parallel with the Earth’s surface.

There are two types of movement of wind in the atmosphere.

1. Horizontal movement

2. Vertical movement (Currents)

The primary wind circulation in Northern and Southern hemispheres is seen in figure on page 51.

Cloud has been defined as a visible aggregation of minute water droplets and / or ice particles in the air, usually above the ground level.

CLASSIFICATION OF CLOUDS

Though confusion apparently arises from the number of kinds or species, the genera seems reasonably clear out, if we are able to recognize their main characteristics.

Clouds are usually classified according to their height and appearance. For convenience, we list them in descending order. High clouds, middle clouds and low clouds are some forms do not fit in any of these categories. But fortunately their particular characteristics make them easily identifiable as vertical development clouds. We must exercise some caution in studying on height. There is some seasonal as well as latitudinal variation and there is some overlapping from time to time. However, the appearance of clouds is quite distinctive for each height category.

Hydrological cycle involves four major steps, Viz., Evaporation, Transpiration, Condensation and Precipitation. Though the cycle has neither a beginning nor an end, the concept of cycle begins with the water of oceans, since it occur nearly ¾ of the Earth’s surface. Radiation from the Sun, evaporates water as water vapour from the oceans into the atmosphere. The water vapour rises and collects to form clouds. Under certain condition, the cloud moisture condenses and falls back to the Earth as rain, snow, hail etc. Precipitation reaching the Earth surface may be intercepted by vegetation or enter into the soil, may flow as run-off or may evaporate.

Evaporation may be from the surface of the ground or from free water surface. Transpiration may be from plants.

Condensation: The physical process by which a vapour becomes a liquid or solid – opposite of evaporation.

The change of state of water from solid and liquid to the vapour and its diffusion into the atmosphere is referred as Evaporation. In the meteorology, evaporation is defined as the maximum possible loss of moisture from a wet, horizontal, flat surface exposed to weather which exist in the vicinity of plants.

FACTORS AFFECTING EVAPORATION

1. Those affecting water supply at the evaporating surface. i.e., soil and plants including soil storage capacity, rainfall and irrigation and

2. Those affecting energy supply to the evaporating surface like solar radiation.

Cloud usually consists of very small droplets of water which cannot fall appreciably below the cloud base without evaporation. In this condition clouds are stable. Rain drops are about a million times heavier than cloud drops and rain develops only if the cloud droplets grow by some mechanism. Cloud Seeding mechanism depends on the difference in vapour pressure over ice and super cooled cloud, water evaporates of the droplets and migrate to the ice crystal, which grows and begins to fall increasing their growth rate by coalescence with other droplets and eventually melting and falling as rain drops. Presence of ice nuclei determines whether ice crystals form in a supercoold cloud or not. Ice crystals form on naturally occurring nuclei at temperatures of – 10⁰ to 30⁰ C. At warmer temperatures, either the efficient ice-forming nuclei are often deficient in the atmosphere or the cloud may occur with tops supercooled but not to an extent which activates the ice nuclei available. It should be possible to initiate precipitation by introducing ice crystals or by supplying artificial nuclei.

The march of weather factors during crop period is never smooth and regular. Agriculture, because of its dependance on climate is inevitably subjected to unpredictable long and short term fluctuation characteristic of atmosphere conditions. Climate introduces an element of risk in farming which makes it particularly hazardous occupation.

A Weather hazard in this context can be defined as any type of extreme weather condition that can damage the crops and animals leading to abnormal decrease in production and income. The extent to which these hazards create risk depends on the time of occurrence, intensity and duration of the hazard besides the age, stage of development and inherent resistance of the crop or livestock involved. Major abnormalities affecting the crop production are:

El Nino means ‘The Little One’ or ‘Christ Child’ in Spanish. It was originally recognized by fisherman of the coast of South America as the appearance of usually warm water in the Pacific Ocean, occurring near the beginning of the year i.e. around Christmas. That is why the name is used. El Nino, the periodic warming of Pacific Ocean waters that affects the weather worldwide. C. Fred and T. Andrus of the University of Georgia studied the ancient fish bones from refuse left about 6000 years ago by ancient peoples in Peru and found that ocean catfish lived in water that averaged 60 to 70 warmer than now and that there was little variation in temperature. He concluded that if El Nino was occurring at the modern rate, once every two to seven years, then the bones from the fish would have reflected the temperature variation.

Plant growth is resultant of all the environmental factors – climatic, physiographic, edaphic and biotic factors.

For a particular field – it is primarily a function of climate with temperature and light – being the most important factors. – Close relationship exists between plant phenology and both latitude and altitude.

Season is a period in a year, comprising few months during which the prevailing climate does not vary much. Growing season for a crop is more important for its yield and other management practices, to be followed.

Indian Meteorological Department has divided the year into four seasons.

Climate, in general, is the totality of weather during a longer period and over wider area. Agro climate can be defined as the conditions and effects of varying weather parameters like solar radiation, rainfall etc., on crop growth and production.

Climatic classification is a method of arranging various data of climatic parameters to demarcate a country or region into homogenous zones i.e., places having similar conditions.

Environment in which crops are grown dictates their final yield. Of these environmental factors, climate and weather the uncontrolable factors, have maximum influence on crop productivity. Vagaries of weather subject a crop to different ecological situations from year to year leading to differential responses of crops to input resources. This situation limits the use of costly inputs for realizing optimum yield. While weather itself cannot modify, the hazardous weather can often be mitigated by agronomic management. Therefore, the primary requirement for initiating agronomic measures against weather hazards is foreknowledge of weather situation that is likely to develop in an area.

Variation in field crops between years is associated with many factors. This is mainly due to weather, soil and management factors. There is complex reaction of weather variables among themselves as well as with other factors. Therefore, many attempts were made to study the effect of weather variable on crop yield through simulation modeling.

Crop yield is influenced by genetical (heredity), external (environmental) and management factors that occur during the crop growing period. The external environment is the climate which regulates and determines the growth and development and final output of crop plants. But, man has no control over weather, hence it is dominance over the success or failure of agricultural enterprises. According to the World Meteorological Organization, the weather induced variability in crop yield is as high as 50 per cent. Therefore, weather should be taken as one of the inputs in agricultural planning.

The earth has two motions. (1) Rotation and (2) Revolution. The earth rotates about its axis (west to eastward) with a speed of 464 m/s or 1669 km/hr. Its angular speed of rotation is about 7.29 x 10^-5 radians/sec or 0.26244 radians per hour. This rotation causes day and night and diurnal variations of weather.

The rotating earth revolves round the sun in an elliptical orbit (with the sun at one of its Foci) with a speed (orbital speed) of about 1.073 x 10⁵ km/hr or 29770 m/s or 29.8 km/s. This revolution causes seasons. It has been stated earlier that the apparent path of the sun with respect to the celestial sphere is called ecliptic.

Naturally Greenhouse gases are cover as blanket on the Earth and kept it about 33⁰C warmer than it would be without these gases in the atmosphere. This is called as the “Greenhouse Effect”.

Over the past century, the Earth has increased in temperature by about 0.5⁰C and many scientists believe that this is because of an increase in concentration of the main greenhouse gases viz., carbon dioxide, methane, nitrous oxide and fluorocarbons. People are now calling this climate change over the past century the beginning of “Global Warming”.

The communication system provides the forecaster with a large mass of figures; the next step is to put them into a suitable form for study. This is done by plotting the observations on a large outline map which in popular term is called a “Weather map” technically a “Synoptic chart” simplified synoptic charts appear in some newspaper.

A chart or map on which meteorological data presented and analysed is called a synoptic chart. Synoptic means having the same view point. The representation of the meteorological data in synoptic chart are atmospheric wind, temperature, pressure, cloud, precipitation, dew point etc., over a long area at a given local standard times.

Food, clothing and housing are the three basic needs of a man. After that the additional requirement of a man are personal health and happiness. These can be considered as human factors. The material factors are agriculture, industry, trade, water resources management, insurance.

The continuous increase in population made the planners, researchers and cultivators to increase the food production to feed all the people. So, the second green revolution has to follow. Due to increase in air temperature and climate change, the cultivation practices to change based on the changing climatic condition. The study of climate is not only necessary for food production, but also needed for transportation, storage, value addition and consumption.

The need of the cloth for man is not only for style. The basic need is to protecting the human body from the climatic factors like heat and cold. Clothing must provide to maintain the body heat at about 37^oC. Clothing must be made based on the local climatic condition. So, the traditional fiber for making the cloth is better for health.

Housing provides the internal controlled climate to the human being. It provides comfort to the inhabitants. Like clothing traditional styles, sites and methods of housing have to be followed based on the climatic condition. Though people are living in the multi-storied building, they have to concentrate on comfort in the case of sufficient aeration and ventilation. In India, the Vastu Sastrum is nothing, but it provides the needs of the human livings for their comfort with sufficient light and air.

The climatic factors for a particular day are not similar to previous day. Similarly, definitely the climate of one season is not similar to other season. Man needs some recreation in the comfort climatic areas. So, he/she needs cool climate for stay that necessitate to air conditioner particularly during summer.

Laparoscope

The term laparoscope derived from Greek word “Laparo” meaning “flank,” which is the side of the body between the ribs and hips (abdomen) and “scope” means to look at or examine. Laparoscope can be defined as an instrument through which structures within the abdomen and pelvis can be seen or a fiber optic device that consists of a flexible tube. Fiber optic scope is used to directly visualize the internal anatomy of a hollow organ. Laparoscope is used in laparoscopy and laparoscopic surgery. It has lenses like a telescope to magnify body structures, a powerful light to illuminate them and a miniature video camera. The camera sends images of the inside of the body to a TV monitor in the operating room. Specialized surgical instruments can be inserted through the laparoscope.

The early history of laparoscopy is unknown to many surgeons, but Hippocrates (460-375 BC) in Greece was first to describe endoscopy). He made reference to a rectal speculum. Hippocrates also advised injecting a large quantity of air into the intestines through the anus in the case of intestinal obstruction. He also advocated the insertion of suppository that was 10 digits long. These descriptions suggest that Hippocrates was well aware of ileus with intestinal obstruction and thought of several possible etiologies, including faecal impaction, intussusception, and sigmoid volvulus. Moreover, Hippocrates treated these life-threatening conditions with minimally invasive approaches.

The basic equipment for performing laparoscopy includes the laparoscope and corresponding trocar and cannula, light source, gas insufflator and the Veress needle. Laparoscope applicable for use in the small animals (dog, goat, sheep and lab animals) ranges in diameter from 2.7 to 10 mm in diameter, however, a 5mm diameter telescope is suitable for most cases and 2.7mm may be required for toy breeds of dogs and lab animals. A 0 or 30 degree direction of vision provides the operator with a “normal’ field of view and has proven most useful. Authors are using a 5-mm diameter 30-degree field of view telescope for routine diagnostic laparoscopy. The 5-mm diameter is adequate for most all small animal procedures in animals of variable size. The 0-degree designation means that the telescope views the visual field directly in front of the telescope.