eChapters

Introduction 
Plant disease has been highly impacted by the development of new technology. The degree of the impact depends on how much the technology affects the component steps of the system. Many of the steps in plant disease diagnosis and management depend heavily on accurate and timely information and so can greatly benefit from the development of improved methods of accessing and disseminating information. Computers provide a wide range of tools which are extensively used in plant disease diagnosis and management. In fact, they will be a key to improve farm practices in the coming decades as it is scientifically pertinent to organize farm information in spatial databases because agricultural systems are inherently spatial. Biological and physical aspects of agricultural system create spatial heterogeneity, and as a result, patchiness is the rule in the occurrence and distribution of plant pathogens and disease (Campbell and Madden, 1990). In the area of plant diseases computers are useful

1. ……….. is the study of human relationship in rural environment.

   a) Sociology

   b) Rural sociology

   c) Indian sociology

   d) None of the above

2. Journal of Extension is published from ………….

   a) UK

   b) USA

   c) Germany

   d) Holland

Introduction

Food packaging is one of the most dynamic and fast-growing industries in the current scenario of increasing industrialization. With the constant upsurge in the food wastage at different stages of processing (suchas harvest, storage, processing, transportation, and distribution) leads to more than 15% of food produced ending up in the dumping grounds due to food spoilage caused by climatic conditions andmicroorganisms.Ever-increasing demands of consumers for convenient food makes packaging technology a need of the hour in order to keep the food safe, wholesome and of high quality at the same time.

So appropriate packaging has the potential of not only preventing spoilage but also taking care of healthand well-being of the individuals.Therefore, packaging plays the most important role in the overall safety of the food product.This makes packaging as the ever-evolving field since new requirements need new materials which demands new approaches and technology for better quality products.

By definition, Food packaging is a well-organized system of protecting the food product from any kind of physical, chemical, and biological damage in order to ensure that food reaches the consumer in its most safe condition at minimum applicable cost. It is bridge between production and consumption (Paine, 1992).

Herbicides degrade over time. The persists of herbicides is dependent on several factors including light, temperature, and substrate moisture. Several processes are responsible for herbicide degradation and include the following:

    1.    Photodegradation: The decomposition of herbicides caused by duration or intensity of sunlight is called as Photodegradation. Photodegradation occurs when ultraviolet (UV) light breaks chemical bonds of the herbicide active ingredient. Secondary molecules resulting from the cleavage of the parent molecule are generally less effective in providing weed control. Herbicides such as Monuron, Trifluralin, PCP, Chloramben etc are prone to photodegradation. So these herbicides should be applied in evening or incorporated in to the soil just after application in order of avoiding photodegradation.

Introduction to strategy implementation involves translating strategic plans into actions and achieving desired outcomes. While many organizations focus on the technical aspects of implementation, it is crucial to consider the behavioral dimensions as well. Behavioral dimensions encompass the attitudes, behaviors, and actions of individuals within an organization that impact the success of strategy implementation. Here are some key points to consider regarding the behavioral dimensions of strategy implementation:

Organizational culture: The culture of an organization plays a significant role in strategy implementation. It comprises shared values, norms, beliefs, and practices that influence employee behavior. An accommodating and flexible culture fosters employee engagement, commitment, and alignment with strategic goals.

Leadership and Communication: Effective leadership is essential for successful strategy implementation. Leaders must articulate the strategy clearly, provide guidance, and motivate employees towards the desired outcomes. Communication channels ought to be open, transparent, and promote a culture of collaboration and feedback.

Employee Involvement and Empowerment: Involving employees in the strategy implementation process increases their commitment and ownership. Empowering employees through delegation of authority and decision-making cultivates a sense of responsibility and accountability, leading to enhanced performance and innovation.

Plants and many agro-industrial by-products incorporated into livestock diets may harbor a range of anti-nutritional compounds. These substances can adversely affect optimal nutrition by deactivating specific nutrients, obstructing the digestive process, or diminishing the metabolic efficiency of feed, ultimately leading to negative consequences for animal health and productivity. The naturally occurring plant compounds found in feed that disrupt feed utilization (FCR), lower production levels, and compromise animal health are referred to as anti-nutritional factors. Additionally, natural toxicants present in feed can hinder the absorption and utilization of nutrients in livestock. Therefore, it is essential to implement effective detoxification methods for these feed materials to mitigate toxic effects and ensure their safe incorporation into animal diets. A foundational understanding of these toxicants is crucial prior to undertaking detoxification and subsequent use in livestock feeding.
Natural toxicants can be categorized based on their chemical properties into several groups: Proteins, Glycosides, Phenols, and Miscellaneous toxicants. The chemical characteristics, pathogenic effects, and detoxification strategies for these compounds are briefly outlined below.
Proteins
1. Protease inhibitors: Protease inhibitors are prevalent throughout the plant kingdom, particularly in the seeds of many cultivated legumes. These inhibitors possess the capability to obstruct the function of proteolytic enzymes in the gastrointestinal systems of animals. Specifically, trypsin inhibitors form irreversible complexes with trypsin, rendering the enzyme unable to fulfill its role in protein digestion. This interaction prompts the intestine to secrete cholecystokinin, which in turn stimulates pancreatic enlargement. The presence of trypsin inhibitors in raw soybean can hinder the availability of methionine, leading to adverse effects in young chickens fed raw soybean meal,
including pancreatic hypertrophy, reduced growth rates, gallbladder contraction and increased bile acid excretion, similar to observations in other monogastric animals. In contrast, ruminants can effectively utilize untreated leguminous seeds. Consequently, the amino acids that would typically be released by trypsin are not reabsorbed, leading to their loss when trypsin interacts with these inhibitors. These substances, which are proteinaceous in nature, hinder the activity of certain digestive enzymes, ultimately impairing the growth and performance of non-ruminant animals. High concentrations of protease inhibitors are found in various leguminous seeds, such as soybean, kidney bean and mung bean. There are two primary types of protease inhibitors: a) Kunitz inhibitors, which possess a single active site that binds exclusively to trypsin and b) Bowman-Birk inhibitors, which contain two active sites that can bind both trypsin and chymotrypsin, thereby inhibiting both enzymes. Detoxification: These protease inhibitors are primarily heat-sensitive and appropriate heat treatment of leguminous seeds-such as roasting, toasting, popping, autoclaving (at 120°C and 15 lbs psi for 20 minutes), and cooking-can effectively inactivate them. It is important to avoid overheating during these processes.

7.1 Introduction 
The global economy of today magnifies the extend and scope of product safety issues for a wide range of items, from food and medicine to consumer goods, medical devices, and automobiles (Marucheck et al., 2011). Industrial globalization has raised awareness of the many risks and vulnerabilities that goods face as they move through the supply chain, from design and sourcing to manufacturing, shipping, distribution, and ultimate sale to the end user (Milovanovi? et al., 2017). These challenges necessitate the implementation of reliable and sustainable methods for producing goods. This can be achieved via biorefineries, which may reduce supply chain disruptions while promoting environmentally friendly resource utilization. Biorefineries are usually referred to as first and second generation biorefineries with accordance to the raw material utilized. The former uses food crop as raw material wherein the latter utilizes lignocellulosic and agricultural residues as raw material for generation of value-added products (Guo et al., 2015). Additionally, algae biomass is utilized in the third generation biorefineries (Parajuli et al., 2015). However, among these three the first generation are the most established while the second and third are still developing at various stages due to technical and economic challenges (Gerssen-Gondelach et al., 2014). Globally, ethanol biorefinery processing U.S. corn and Brazilian sugarcane dominate production contributing 52% and 28%, respectively (Renewable Fuels Association, 2023). These biorefineries are further distinguished based on categories such as sugars, oils and syngas which serve as key intermediates in production of bioethanol, glycerol or lactic acid (Calvo-Flores and Martin- Martinez, 2022). Additionally, these biorefineries utilizes feedstock and residues which can be derived from forest, sugar crops and oil crops. The processing technologies employing for utilization of such raw material are fermentation, gasification and pyrolysis. This configuration of biorefinery determines the integration and systematic pathway from raw feedstock to final product (Aristizábal?Marulanda et al., 2019). Furthermore, both the supply chain and value chain are significant part of biorefineries. The value chain stands for the value-oriented aspect of the process which is often derived by customer demand and include product innovation, marketing and value development (Sharma et al., 2013). In contrast, the supply chain focuses on the logistical flow of materials, encompassing the movement of raw materials from suppliers to end consumers. However, certain stages of supply chain overlap with biorefinery systems such as separate pretreatment and fermentation facilities (Sutduean et al., 2019). The design of biorefinery system involves a structural decision process at strategic, tactical and operational levels. These decisions are made with respect to various biohazards at each level. The macro-level strategic decisions, address long-term risk mitigating strategies to ensure overall safety (Chaturvedi et al., 2020). Once the high-level decisions are established, tactical and operational decisions are implemented. The tactical decisions focus on implementing safety measures with processes such as handling hazardous materials and optimizing biorefinery. While

There is only one type of scientific research and that is to solve a real problem or to understand the universe and provide a solution –either with the experiments or by putting a hypothesis. However, we have classified the research in various types as per our comfort. But for the employed researchers, it may be a matter of concern if they are working on time bound research schemes as their services may be co-terminus with the project and they may face the problem of un-employment, after termination of the scheme. According to the scholars’ activities and type of research being carried out in the country, we can discuss the subject under following topics.

Chemical synthesis is spontaneous organization of molecules into stable, structurally well-defined aggregates at the nanometer length scale. Chemical synthesis is largely an art form (i.e., theory often does not quantitatively predict how to make new materials from molecules).Yet, chemical synthesis can be quite powerful (e.g., proteins and complex organic molecules can be made from simple reagents) Semiconductor nanocrystals have been synthesized via “natural self-assembly” in two steps:

1.Capped cluster molecule forms spontaneously from molecular reagents in solution

2.Cluster molecules crystallize out of solution

Introduction

Cucurbits, belonging to the family Cucurbitaceae are among the most ancient cultivated plants. The term cucurbit was coined by Liberty Hyde Bailey for cultivated species of Cucurbitaceae. Other vernaculars applied to the family and several of its members are ‘gourd’, ‘melon’, ‘cucumber’, ‘squash’ and ‘pumpkin’. The Cucurbitaceae consists of two well defined sub families, eight tribes representing varying degrees of circumscriptive cohesiveness and about 118 genera and 825 species (Jeffrey, 1990). It is mostly tropical and sub tropical in distribution and only a few species occur in temperate regions. Some are semi desert or saprophytic in nature. The Indian sub continent is considered to be the centre of origin for a number of wild and cultivated crops. Chakravorty (1982) reported that 36 genera and 100 species of cucurbits are found in India. Cucurbits are cultivated in 8.5 m ha area in world giving a production of 17.9 mt. While in India a total of 4.5 mt cucurbits are produced from an area of 0.42 m ha area (FAO, 2004).

Cucurbitaceae is one of the most genetically diverse groups of plants in the plant kingdom. As a family and as individual crop, cucurbits epitomize adaptive differentiation and evolutionary divergence. Not only may cultivars within a crop vary significantly in their characteristics, but the same cultivar grown in distinct areas can have different needs in response to disparate local growing conditions. Cultures and ethnic groups may have different cultivar preference and horticultural practices, which also increase morphological diversity within a crop.

Cucurbits are of tremendous economic importance as food plants. They are extensively grown in mixed cropping of more than one kind in long and meandering river beds. Of various improvements approaches possible, breeding of superior pure lines and hybrid cultivars of cucurbits utilizing locally adopted land races are the most important methods which will have far reaching impact on increasing the production and productivity of cucurbits.

Learning outcome

In this exercise we will learn about handling of:

1. 18-135 mm lens
2. 70-200 mm zoom lens
3. 8.3.5 mm DSLR lens
4. Babylight
5. Computer
6. DSLR camera
7. Field recorder
8. Mic rod
9. Power adaptor
10. Projector
11. SD card 32 GB
12. Speaker
13. Tripod
14. Projector screen

4.0 Soil organic Matter

The soil organic matter (SOM) is a storehouse of multi-nutrient elements, composed mainly of carbon, hydrogen and oxygen and small amounts of other elements like nitrogen, phosphorous, sulphur, potassium, calcium , magnesium and organic residues coming out from the decomposed plant or animal products (Figure 4.1). The SOM may have the recently incorporated materials or age-old decomposed materials or with living flora or fauna in the organic matrix. Soil organic matter is one of the important components determining soil quality indices and also for enriching the fertility status of soil for production maximization. The nutrient retention capacity , water holding capacity, degradation of pollutant elements, carbon sequestration, soil structure and aggregate stability are affected by the presence of SOM.

OPERATING MECHANISM OF A FLOUR MACHINE
The flour grinding machine operates using blade cutting, high-speed air impact, and a two-layer destruction function that integrates collision and particle sorting. The principle of operation involves the rotor generating high-speed airflow during blade cutting. As the material accelerates within the airflow, repeated impacts cause it to be destroyed in two layers simultaneously, enhancing the destruction rate. As airflow enters the classification chamber, the destruction process rotates at high speed, and the classification rotor generates centrifugal force. The viscous effect of the airflow creates centripetal force. When the centrifugal force on the particles exceeds the centripetal force, the coarse particles return to the destruction chamber, while fine particles are carried with the airflow to the powder collector for collection. There are three primary operating characteristics of the flour mill. First, the main shaft in the power system is sequentially equipped with bearing caps, radial ball bearings, bearing pads, and thrust ball bearings from top to bottom. Second, the grinding system consists of a spring, spring pad, inner grinding head, adjusting nut, and outer grinding head mounted on the spindle. Lastly, the separation system features a brush mounted on the spindle, with a tension spring above and an adjusting nut below the brush. The core principle of the flour grinding process is to reduce grains like wheat, corn, or rice into flour particles. Raw grains are introduced into the mill's hopper and then conveyed to the grinding chamber containing the grinding stones or rollers. As the grains pass through the chamber, the high-speed rotation of the stones or rollers generates friction that crushes, grinds, and pulverizes the grains into a coarse powder, which gradually becomes fine flour. Flour mills are equipped with adjustable settings to regulate the gap between the grinding stones or rollers, allowing for varying flour fineness. This ensures the production of flour suitable for different culinary needs, from coarse flours for rustic bread to fine flours for delicate pastries. The ground flour particles are then

Nanoparticles synthesis is done by two major routes, which include classical synthesis and green synthesis. The green synthesis techniques generally utilize relatively non-toxic chemicals non-toxic solvents, biological extracts and systems. Biological methods are considered safe and ecologically sound forthe nanomaterial fabrication asan alternative to conventional physical and chemical methods

Nanoparticles

Gold, silver, and copper have been used mostly for the synthesis of stable dispersions of nanoparticles, which are useful in areas of photography, catalysis, biological labeling, photonics, optoelectronics and surface-enhanced Raman scattering (SERS) detection

The need for biosynthesis of nanoparticles rose as the physical and chemical processes were costly. So in the search of cheaper pathways for nanoparticle synthesis, scientists used microorganisms and then plant extracts for synthesis. Nature has devised various processes for the synthesis of nano- and micro- length scaled inorganic materials which have contributed tothedevelopment of relatively newandlargely unexplored area of research based on the biosynthesis of nanomaterials.

The quality of irrigation water is a crucial factor for long-term soil productivity. Poor quality water if used for a long time can make the soil less productive or even barren, depending on the amount and type of constituents present in it and the texture of the soil in question. Low or marginally saline waters sometimes appear to stimulate crop growth because of the higher amounts of nutrient ions present.

Introduction

Packaging is an integral and pervasive part of contemporary world. Packaging makes material handling convenient, economical and effortless and modern consumer marketing will seem virtually impossible without packaging. For an engineer or food scientist, packaging is specialized arrangement of matrices fabricated for the delivery of safe food products with maintaining high quality and food safety, at every step of distribution chain including procurement of raw material to manufacturing of finished product; packaging of product; storage; transportation and distribution to wholesaler, retailer and consumer and even for recycling operations [17].

Packaging of food is imperative in a world dominated by marketing-based economy The fact that 73% of purchase decisions are made at point of sale highlighted the importance of a good package design in marketing. During scanning of food package, consumer made quick and rapid perception about the inclusion of a particular food based on the various verbal and nonverbal attributes embodied on food package [25]. Designing is an indispensable are of food packaging. It is medium to attract potential buyers and distinguished the product from the competitors. The presence of visual attributes on package design will not only ameliorates the food product and glamorizes the packets but also defines its authenticity and peculiarity. Therefore, a quality package design is characterized as communication channel between the manufacture and consumer, and unless performed correctly the market image of the brand and product suffers and influence consumer’s perception.

Bacillus thuringiensis (Bt): Soil-inhabiting bacterium that produces an insecticide effective against larval stages of many species of Lepidoptera, although some strains are effective against various beetle, mosquito, and blackfly larvae.

Backcross: A cross between a hybrid and one of its parents; a cross between a heterozygote and a homozygote (cf. Hybridization, Heterozygous, Homozygous).

Bacterial insecticide: Bacteria pathogenic to insects (e.g., Bt or B. popilliae). Applied using application techniques also used for chemical pesticides.

Bacterium (pl. bacteria): Microscopic, prokaryotic, single-celled organisms having cell walls but lacking membrane-bound organelles. Important in decomposition, nitrogen fixation and other symbiosis, and as pathogens. A significant component of soil food webs.

Bait (B): A pesticide formulation that combines an edible or attractive substance with a small amount of toxic active ingredient (usually about 5%). Baits containing poisonous chemical and food stuffs are primarily offered to pests as food for control of animal pests like mollusks, cutworms, and rodents.

Review of literature or consulting of literature is just beginning of a research project. The main intellectual work is to study the previous work meticulously and to draw conclusions regarding existing problems. This leads us to another intelligent part of the research i.e. planning of the research work. If you analyze what you are planning, it is only about materials to be employed and methodology of the research work (with planning of the work)- only these three parameters are under your control as results will be the outcome of these three facets while discussion will be how you consider your results in presence of previous research work. In fact, this statement of mine is more align to the sermon of “Shrimad Bhagwat Geeta” (5) where it is stated that man has control only on his actions (planning and conducting research) hence fulfill this duty without caring for the results-which in turn will depend on your analyzing the previous facts and how you have planned to solve the problem. Therefore, pay full attention on these three facts of the research.

Mastitis is a global problem as it adversely affects animal health, quality of milk and economics of milk production. Bovine Mastitis is reported to be the most costly disease of dairy cattle, causing huge economic losses in terms of reduced milk yield, milk discard after treatment, cost of veterinary services and premature culling. While reviewing status of mastitis in India, subclinical mastitis is more important (10–50%) than the clinical mastitis (1-10%). Estimated annual economic losses incurred due to mastitis estimates to Rs.7165.57 crores to dairy farmers (Bansal and Gupta, 2009).

Introduction
Science and its development have had a great impact on the biological research. The main problem arises to understand and interpret the data which are the results of the higher dimensional research in the above mentioned field, and it is extremely difficult some times to give answers for complex and tedious biological questions generated through the large datasets. Parallel developments of statistical methods provide relaxation over these issues. The statistical method by bioinformatics presents many new and logical problems for researchers, scientists, and scholars related to these communities. Thus the knowledge of statistical concepts and techniques are prime important in this chain. The effort is made to cover stochastic theory, finite Markov chains in learning models to diffusion processes in population genetics, advanced statistical methods with Hidden Markov model and provide some literature on Bayesian computation like MCMC and their resources. Fortunately the applied aspect of probability theory and theory of stochastic processes seem to have been extensively used in the research and development level of biological field but the lacking of required material is a very problematic aspect in the system with proper and systematic ways.