eChapters

Introduction
Potato (Solanum tuberosum L.) is one of the most important tuberous, starchy and versatile food crop belongs to family Solanaceae. In India potato is grown in an area of 2.07 Mha with a production of 48 MT and a productivity of 23.19 MT/ha. The potato producing major states in India are Uttar Pradesh, West Bengal, Bihar, Madhya Pradesh, Gujarat and Karnataka. In Karnataka, the crop is grown in an area of 44,160 ha with an annual production of 5,89,120 MT and productivity of 13.34 t/ha (Anonymous, 2014). Further in Karnataka Potato is mainly grown in Hassan, Belgaum, Dharwad, Chikkaballapur and Kolar districts. Hassan district alone contributes more than 41 per cent of potato production in the state (Bhajantri 2011). Basically potato prefers relatively low temperature during early growth and cool weather during tuber development. It requires 25°C temperature at the time of sprouting, 20°C for vegetative growth and 17 to 20°C for tuber development. ARC saplings are mainly used for seed tuber production at a quicker rate. Farmers can produce zero generation seed tubers from ARC saplings without any shipping costs involved. In this regard KVK, Hassan after knowing the existence of innovative ARC sapling technology from the International Center for Potato (CIP), German innovation center (GIZ/GIC) Bengaluru, Krishi Vigyan Kendra, Kandali, Hassan procured tissue culture bottles/mother culture from CPRI, Shimla Himachala Pradesh through CIP, GIZ/GIC Bengaluru. By using the mother culture KVK Hassan has produced approximately two lakhs ARC saplings with existing facility and conducted the field evaluation studies on “Performance and evaluation of Apical Rooted Potato saplings in Hassan district”.
About the Technologies Addressed
The ICAR-KVK, Hassan has introduced two technologies in potato during last decade to improve the yield and to reduce the cost of production, namely, Apical Rooted Cuttings (ARC) for quality seed tuber production and Mechanization in Potato to reduce the labour requirement and drudgery. The ARC is a technology where small portion of disease free mother tuber is collected and multiplied under aseptic conditions (Tissue culture) in a growing media to produce new and healthy plantlets. These plantlets are used as mother

1.    I deem it a singular honour to deliver Dr. Sen Memorial Lecture. Dr. Sen, who was both an administrator and a visionary, was instrumental for:

Abstract
 
Pop sorghum, apart from popping qualities has also shown the potential fodder yielding abilities. A field experiment was conducted at University of Agricultural Sciences, Dharwad, Karnataka during kharif 2001 under rainfed situation.

There is no rapid direct test to determine fertility of semen sample. During freezing and thawing of semen, 20-80% of the spermatozoa become immotile or dies. In addition to this, there may be damage to spermatozoa by disintegration of sperm cell membrane and acrosome leading to loss of intracellular enzymes. The only reliable method to evaluate the semen is to inseminate a cow and get a calf at the end of gestation period. Now-a-days new methods have been developed for in-vitro assessment of fertility of spermatozoa. Some of these methods are exhaustive, time consuming, need for a full-fledged analysis and difficult under field conditions.

3.1 Introduction

There is now latest national thinking going on to conserve the known sources of energy such as firewood, cow dung, agricultural waste, kerosene, oil etc. i.e. by limiting their conventional uses and to propagate the use of non conventional energy especially in the rural area. The large scale indiscriminate use of non commercial fuels fully in the rural areas are not only providing to be inefficient but also inadequate to cope with the growing rural energy demand caused by growing population and growing consciousness among rural people for a better way of life. Planned input of energy are, therefore urgently require to protect the environment and to cope with raising rural energy demand. In order to assess the widening gap between the supply and demand of commercial energy and indiscriminate use of non commercial fuels in rural areas, there is a need for various types of statistical or quantified information to be collected and analyzed in an objective manner and presented suitability so as to serve as a sound basis for taking policy decision to make an optimum utilization of commercial energy in a balanced manner. This will require conducting of survey in areas to be covered.

The statistical data may be collected by complete enumeration or by a sample survey. The earlier method is very cumbersome, time consuming, cost ineffective and requires an intensive development of manpower, if domains of study is quite large. Complete enumeration and sample surveys presuppose the existence of a certain minimum of facilities such as funds, professional personnel for planning the survey methodology and supervision of field operations, sufficiently qualified enumerators, sampling frames, machine tabulation equipment, transport and communication facilities etc. These facilities or combinations there of do not always exist to the extent needed for a complete enumeration survey. As such, sample survey is preferred to complete enumeration for ethic type of studies giving due importance to sampling error.

In the integrated energy planning, there is an objective to find out the present consumption pattern of energy for different end uses, shortages being experienced and people’s reaction to using alternate sources of energy is also enumerated.

The survey methods determine – incident, distribution and the interrelation among sociological variable and psychological variable. The sociological variable s consists of age, education, income and attitude, behavior, motivation, belief and knowledge about the problem.

3.1. Determination of Bulk Density of Soil

3.1.1. Determination of Bulk Density of an Undisturbed Soil

Bulk density of soil is expressed as the ratio of the mass (weight) of soil particle to their total volume including the pore space between the soil particles. Alternately, it is the weight of unit volume of dry soil. It is usually expressed in the unit of gram per cubic centimeter (g/cc) or mega gram per cubic meter (Mg/m³). In fine textured soil bulk density varies from 1.00 to 1.60 g/cc, whereas in coarse textured soil from 1.20 to 1.80 g/cc.

4.1 Introduction

Banana (Musa spp.) is one of the oldest fruits and second largest growing fruit crop in the world. It is also known as Adam’s Fig and Apple of Paradise. Important banana growing states are Maharashtra, Karnataka, Kerala, Tamil Nadu, Andhra Pradesh, Odisha, Bihar, West Bengal and Assam. In South India, banana is extensively used in all auspicious occasions such as wedding, festival and worship. Banana is a good table fruit. The cultivar Nendran is used for cooking; it is also used for preparation of halwa, sweet, chips etc. Main bud or heart of banana bunches is also used as vegetable in India, Thailand, Philippines, Malaysia and Indonesia. Musa textiles is known for strong fibre quality. Ripe banana contains about 20% sugar (but no starch) and about 4.7% protein. Further, it contains vitamins A, B, C, D and E and minerals such as K, P, Ca and Fe.

A number of quality management tools are being used in food processing industry. Often selection of such tools are tough as it involves several factors for decision-making. The problem of choice of quality management and tools can be solved by selection on the basis of the objective decision making process rather than on the opinion of the decision makers (Sukkarn and Thawesaengskulthai, 2015).

The application of (VCRS) Vapour compressor refrigeration system is in the air conditioners (window, split, central or precision), car air conditioners, domestic refrigerator etc. The different parts of a domestic refrigerator are: in the hermetical sealed compressor, air cooled condenser, capillary tube, thermo expansion device, filter, rotameter, solenoid valve, temperature control sensor.

Introduction

Silk also known as the “Golden Fibre” is admired all over the world for its lustre, strength and smoothness. Sericulture industry is an ecofriendly agro based activity of mulberry cultivation, silkworm rearing and production. It is a labour intensive, rural cottage industry providing subsidiary employment and supplementing the income of semi-literate and semi-skilled poor workers throughout the year [Chanotraet al., 2019]. The term ‘sericulture’ includes economic activities which receive poor workers in the value addition at each stage like (i) raising plants for feeding the silk-worms (in the form of the mulberry plantation); (ii) production of disease-free silkworm layings (dfls), eggs, or seeds; (iii) indoor rearing of silkworms till the cocoon stage which produces silk (about 30-day egg-to-cocoon cycle), and (iv) sale of silk cocoons produced.

Silk industry can be broadly classified into; (a) sericulture, (b) post-cocoon technology – reeling (yarn production), spinning and twisting of silk yarn from the cocoons; and (c) weaving, fabric production, printing and dyeing, finishing, garment designing, marketing etc. These activities also provide the auxiliary enterprises of by-product utilization and machine manufacture including spun silk yarn manufacture and pupae oil extraction, thus creating livelihood for the small and marginal farmers and labour force.

Asia is the key producer of silk in the world producing over 98.5 per cent of the global output. There are more than 40 silk producing countries, but the majority of its production comes from China and India, followed by Brazil, Uzbekistan, Thailand, Vietnam, Korea and Japan. Unlike temperate countries, India has a distinct advantage of practising sericulture all around the year, as a result of its tropical climate, yielding a stream of about 4-6 crops (Savithri and Sujathamma, 2019).

5.1 Crop modelling

• Crop model

• “Schematic representation of the system’’i.e. a model as defined by De Wit 1970.

• Such a model can be based on statistics applied to a set of experimental data or on physical laws (Guyot, 1997).e.g. Irrigation is able to satisfy a crop’s water needs provided its management relies on the measurement or estimation of evapotranspiration. The manager can either invest in equipment to monitor changes in water content in the soil or fluxes of water into the plant or the atmosphere, or rely on a ‘‘schematic representation of the system’’, i.e. a model.

• In very simple terms we can define a crop model as “a well-thought out plan of activities to grow the desired crop to get maximum possible yields of high-quality produce with the given resources. It can be a mental or a written exercise (a “schematic representation of the system”) that a farmer or a farm manager prepares for a crop or for an individual crop”.

• In other words, we can also say that a model is “an attempt to describe a certain process or system through the use of a simplified representation, preferably a quantitative mathematical expression, that focuses on a relatively a few key variables that control the process or system”.

• It is clear that in finalizing a crop model we have to assume some mean or standard values (based on the past record, experience, expert judgment, etc.) of the variables which we may not be taking explicitly in our model.

India’s indigenous poultry breeds play a crucial role in rural livelihoods, providing a sustainable source of nutrition and income. These native breeds are well-adapted to the local environmental conditions, demonstrating remarkable resilience and disease resistance. Despite their lower production potential compared to commercial breeds, their economic value and cultural significance make them indispensable in the rural context.

Indigenous Fowls of India

• India has a population of 217.80 million indigenous (Desi) chickens, representing 25.57% of the total poultry population (851.81 million) in India (BAHS, 2023, GOI).

• A total of 20 indigenous chicken breeds, 3 duck breeds, and 1 geese breed have been registered under the ICAR-National Bureau of Animal Genetics Resources (NBAGR) to date (Table 4.1 & 4.2).

• Indigenous fowls are typically reared under a backyard system, often referred to as “backyard poultry,” with minimal focus on housing and feeding.

Scientific name: Pelargonium graveolens L. Herit
Family: Geraniaceae
Geranium, scientifically known as Pelargonium graveolens L. Herit, belongs to the Geraniaceae family. This aromatic plant is highly valued for its essential oil, which boasts an intense rose-like fragrance. Geraniol and citronellol are the primary constituents of this oil. There are approximately 600 species within the genus Pelargonium, many of which possess a pleasant odor, although only a few have attained commercial significance.
Types of Geranium
There are two primary types of geranium: Algerian or Tunisian Type: Characterized by slender, erect plants with dark pink flowers. This variety contains 0.3% oil, with 57% 1-citronellol. It is commonly grown in the Nilgiris and is unsuitable for wet conditions. Reunion or Bourbon Type: Produces more bushy growth with light-pink flowers. The oil has a higher 1-citronellol content (59.4%). This variety is grown in the Nilgiris and Anamalais and is more suitable for wet conditions.

Bacteroides spp are non-spore forming gram-negative bacilli that are part of the human resident flora. Microbiologically, they are distinguished from other genera by growth in 20% bile. At present, the Bacteroides fragilis group consists of ten species: B. fragilis (the most frequent isolate), B. distasonis, B. thetaiotaomicron, B. vulgatus, B. ovatus, B. eggerrthii, B. merdae, B. stercoris, B. uniformis, and B. caccae. Since 1990, many organisms previously designated as Bacteroides have been reclassified (see chapter on Anaerobes other than Bacteroides). Bacteroides, the predominant genus in the human
intestine, are important in numerous metabolic activities and may provide some level of protection from invasive pathogens. All 10 species are usually isolated from the colon, although infections caused by or associated with them can include virtually any organ.
Characteristics
The gram-negative Bacteroides spp. or closely related genera are capsulated obligatory anaerobic bacilli that are non-spore forming, pale-staining, and some are motile by peritrichous flagella, while other taxa are non-motile. Bacteroides, Parabacteroides, Odoribacter are generally bile resistant, distinguished from genera which are bile sensitive. They are normally commensal, found in the
intestinal tract of humans (mouth, colon, urogenital tract) and other animals. Many cultures of Bacteroides strains display brown to black pigmentation on blood agar media caused by esculin hydrolysis.
Morphology
In general, all strains were stained poorly with safranin, but well with dilute carbolfuchsin. Motility was not observed in any strains. The morphology of Bacteroides fragilis in fresh cultures and in pus is not
especially characteristic. In this form, the bacillus measures 0.5 by 2.0 to 2.5 micra. Older cultures tend to develop larger forms (0.6 to 0.8 by 2.0 to 9.0 micra) but even in this state the organism cannot be distinguished from aerobic Gram-negative bacilli, by its morphology.

India’s rural economy plays a vital role in the overall development of the country, with a significant portion of the population dependent on agriculture and allied sectors for their livelihood. Despite the structural changes in
the Indian economy over the past decades, agriculture continues to be the primary source of income for a majority of rural households. However, the income levels of farmers and rural people vary widely due to factors such as landholding size, access to resources, market linkages, climatic conditions, education, and government support systems.
The average monthly income of agricultural households in India has been a matter of concern and active policy intervention. According to reports from the National Sample Survey Office (NSSO) and other government bodies, many small and marginal farmers earn less than what is required for a sustainable  livelihood. This income typically comes from multiple sources, including crop production, livestock rearing, wages, and non-farm activities. Yet, the increasing input costs, fluctuating market prices, and the vulnerability to climatic shocks make farming a risky and often unremunerative occupation. To address these challenges, various initiatives have been undertaken by the Government of India, such as the Doubling Farmers’ Income (DFI) strategy, minimum support prices (MSP), crop insurance schemes like PMFBY (Pradhan Mantri Fasal Bima Yojana), rural employment guarantee schemes like MGNREGS, and efforts to promote farmer producer organizations (FPOs).

Introduction 
Nestled in the heart of Karnataka, Tumakuru District is renowned for its verdant landscapes dotted with vast expanses of coconut and areca nut plantations. The region’s unique climatic conditions, characterized by a harmonious blend of sunshine and seasonal rains, create an ideal environment for the growth of coconut palms, which have become a staple of both the local economy and the cultural fabric of the community. Historically, coconut trees have not only provided sustenance but have also played a pivotal role in the livelihoods of many families in Tumakuru. The fruit is a key ingredient in various local dishes and is widely utilized in traditional ceremonies and celebrations. However, the task of harvesting coconuts from these towering trees has long been a physically demanding endeavour. Traditionally, skilled climbers would ascend the tall, slender trunks, utilizing their agility and experience to pluck coconuts by hand. This craft, which once flourished, has now seen a decline, making it increasingly challenging for coconut planters to find professionals who can perform this labour-intensive task. The decline in manpower has made it evident that traditional methods are no longer sustainable. If coconut farmers wish to keep pace with growing market demands, a new approach is necessary one that balances traditional harvesting practices with modern technology. Recognizing this need, innovative minds have introduced the “Coconut Tree Climber”, a mechanized device specifically designed to address the challenges faced by coconut planters. The Coconut Tree Climber is a user-friendly and efficient device that significantly simplifies the process of climbing and harvesting. Built with a strong and adjustable mechanism, the device allows a person to securely climb tall coconut trees with minimal physical effort. More importantly, it drastically reduces the risk of accidents, ensuring the safety of the user. Unlike traditional methods that rely solely on human strength, the device takes advantage of mechanical power, enabling planters to harvest coconuts faster, safer, and more efficiently. This innovation has proven to be a game-changer in the coconut farming industry. Not only does it empower farmers to become self-reliant, but it also minimizes their dependence on skilled climbers. Additionally, the device can be operated by individuals of varying ages and physical strength, making it accessible to a broader range of people. This, in turn, provides new employment opportunities for those who may not have had the physical ability or training to climb trees in the past.

The Late Dr. APJ Abdul Kalam is described as a great patriot, visionary leader and the 11th President of India ( 2002 – 2007 ). The country would have celebrated his 84th birth day on 15th October 2015. To many like me, he was the most ideal role model that the youth of India needed, in recent time. He emerged as a complete human-being who touched the lives of people.

My first meeting with him was when he visited IPCL in eighties - as the DRDO Chief to discuss about Carbon Fiber and Composites. I was heading GSFC’s R&D Centre and other facilities like engineering plastic Nylon – 6 and their Composites and hence was invited to join the discussions. That interaction left a strong impression in my mind. Later when I became Vice Chancellor of Gujarat Agricultural University, I had many more opportunities to meet him and was often surprised at his deep rooted interest and knowledge in every sphere of Science & Technology. Subsequently, to my delight, I received an invitation from his office on the eve of 26th January evening - at home with the President and later was given more time for a one-to-one meeting the next day. Walking across the corridors of the Rashtrapathi Bhavan, the atmosphere looked rather formal and uneasy for me, but, as I was ushered into his room, I saw Dr. Kalam wearing his favourite blue shirt and smiling. He moved forward and greeted me with the same friendliness and warmth. As we started talking about Agriculture scenario, the work I was planning and the future prospects, I marveled at his understanding and insight and left the room truly inspired. 

Abstract

A field experiment was conducted at Mechanized Commercial Farm, College of Agriculture, Junagadh Agricultural University, Junagadh (Gujarat) during the Kharif-Rabi seasons of 2006, 2007 and 2008 to study the effect of tillage practices on yield of rainfed castor (Ricinus communis). The experiment was laid out in Randomized Block Design with four replications. The six treatments comprised viz., T_1- Conventional tillage (Cultivator + blade harrowing), T_2-Ploughing followed by cultivator and blade harrowing, T_3-Tillage through rotavator, T_4-Furrow opening through sub-soiling, T_5-Furrow opening through V-notch cultivator and T_6-Zero tillage (pre and post emergence herbicides + 2 hand weeding). Among the different treatments, the different growth and yield attributing parameters viz., plant height, number of spikes per plant, length of main spike, number of capsules per spike and test weight, seed and stalk yields, higher gross and net returns were recorded when field was prepared by ploughing followed by cultivator and blade harrowing. It also improved soil moisture content which was closely followed by tillage through rotavator (T₃) and furrow opening through sub-soiling (T₄).

A Scanning electron microscope (SEM) is a type of electron microscope that images a sample by scanning it with a high-energy beam of electrons in a raster scan pattern. The electrons interact with the atoms that make up the sample producing signals that contain information about the sample’s surface topography, composition, and other properties such as electrical conductivity.

The types of signals produced by an SEM include secondary electrons, back-scattered electrons (BSE), characteristic X-rays, light (cathodoluminescence), specimen current and transmitted electrons. Secondary electron detectors are common in all SEMs, but it is rare that a singlemachine would havedetectors for allpossiblesignals. The signals result from interactions of the electron beam with atoms at or near the surface of the sample. In the most common or standard detection mode, secondary electron imaging or SEI, the SEM can produce very high-resolution images of a sample surface, revealing details less than 1 nm in size. Due to the very narrow electron beam, SEM micrographs have a large depth of field yielding a characteristic three dimensional appearance useful for understanding the surface structure of a sample.

Introduction

Organic seeds are produced by purchasing conventional non-treated seeds and growing them on organic plot / farm for one season without the use of any synthetic chemical. The seeds harvested are then sold on to organic farmers as organic seeds.

Over 98% of sprayed insecticides and 95% of herbicides reach a destination other than their target species, because they are sprayed or spread across entire agricultural fields. Runoff can carry pesticides into aquatic environments while wind can carry them to other fields, grazing areas, human settlements and undeveloped areas, potentially affecting other species. Other problems emerge from poor production, transport and storage practices.

Production of organic seeds without the use of pesticides like herbicides (weeds), insecticides (insects), fungicides (fungi), nematocides (nematodes), and rodenticides (vertebrate poisons) is a matter of skill and expertise. For this purpose, the seeds used for planting, the soil where they are planted, the water used for irrigation and even the air, need to be kept free of pesticides in order to prevent their contamination.

Seed