eChapters

1. Brief Basic Information on Country and Agrarian Status

Peru is the third largest country in South America with 1,285,215 square-meters and in general, there are three well defined regions: the Coast (11 per cent of the territory), the highlands (30 per cent of the territory) and the jungle (59 per cent of the territory). Peru is characterized by the high variability of agro-ecosystems ranging from Deserts in the Coast, lowlands, hills, high mountains, and rainforest in the Jungle. Each region has different agro-climatic conditions, infrastructure and enterprise development. The total cultivable land area is 54,76,977 hectares that is equivalent to 4.3 per cent of the national territory. The coast has 8,70,200 hectares of irrigated land (no rain-fed land because of lack of rain in the coast) and has the best conditions for cultivation of export crops. The highlands have 28,33,800 hectares of cultivable land, 70 per cent of them is under rain-fed condition and the total of the 17,73,000 hectares of cultivated land under rain-fed conditions1 . Land property has undergone a process of changes in the last 40 years.

Introduction

Agriculture in general and horticulture in particular are highly vulnerable to year-to-year climatic variability. Farmers and other decision makers in agriculture make decisions based on their understanding of general climatic patterns for their regions. Crops are constantly threatened by pests such as insects and nematodes, as well as diseases caused by fungi, bacteria, viruses and other micro-organisms. However, depending on weather conditions, the severity is very variable from year to year and often control strategies are applied without considering the climatic variability. Moreover, following the global climate change predictions, meteorological conditions triggering pest population/disease infection cycles are destined to increase, leading to consequent increase of the pests/diseases pressure. Sustainable plant protection strategies rely on weather and climate related pest and disease forecasting models in order to:

Natural farming in India adopts a preventive and ecosystem-based approach to pest and disease management, prioritizing ecological harmony over chemical control. Rather than eradicating pests, the aim is to regulate their populations through natural mechanisms and enhance the farm’s biological resilience.
Natural farmers commonly use plant-based formulations such as Agniastra, Brahmastra, and Neemastra. These are prepared from locally available herbs, cow urine, and cow dung, and serve as effective insecticidal and antifungal sprays. Neem (Azadirachta indica) plays a central role due to its wide-ranging pestrepelling properties and is a staple in fermented bio-sprays. Practices like crop
rotation, intercropping, and companion planting help disrupt pest life cycles and minimize disease occurrence. Crops like marigold deter nematodes and aphids, while plants like basil and turmeric suppress fungal infections. These practices also promote the presence of beneficial insects and pollinators, contributing to natural pest control.
A key strategy in natural farming is enhancing soil health through inputs like Jeevamrit, compost, and fermented plant extracts. These boost microbial activity, which in turn suppresses soil-borne pathogens and strengthens plant
immunity. Waaphasa—ensuring proper soil aeration—helps prevent root diseases by maintaining an optimal air-moisture balance in the rhizosphere.
Regular field inspection and sanitation help in early detection of pest issues. Timely weeding and residue management further reduce disease spread. Immediate application of natural deterrents can prevent outbreaks from escalating.

In natural beekeeping systems, the management of pests and diseases focuses on prevention, ecological harmony, and chemical-free practices that safeguard both bee health and environmental integrity. Departing from conventional methods that often depend on synthetic antibiotics, fumigants, or miticides, natural approaches aim to fortify the colony’s inherent resilience through biological and culturally grounded techniques. Central to this strategy is the maintenance of strong, genetically robust colonies, ensuring clean and well-aerated hives, and providing nutritional support through diverse and abundant floral sources. Healthy, wellnourished colonies are inherently more capable of withstanding infections and parasitic invasions.

Indian apiaries commonly contend with pests such as wax moths, ants, wasps, small hive beetles, and mites like Varroa destructor and Tropilaelap sclareae. Diseases including American foulbrood, European foulbrood, chalkbrood, and Nosema can pose significant threats if not identified and contained promptly. Natural management emphasizes routine hive inspections to detect early symptoms, followed by the removal and safe disposal of infected combs. Maintaining adequate space between colonies can minimize disease transmission, while structural modifications to hive entrances and the use of barriers like ash rings or water moats effectively deter ants and other intruders.

Introduction

Surging food demand and shrinking land resources to produce more from the limited natural resources like soil and water is poised to environmental degradation. Increased production must be achieved mainly by increasing crop productivity per unit area while sustaining the environment and enhanced input use efficiency. Agricultural production systems are increasingly under pressure to adapt decision-making process to be make more informed and efficient use of irrigation water, fertilizers and pesticides. Adverse effects of climate change are added challenges to agricultural productivity. Efficient crop management strategies to improve resource use efficiency and reduce crop losses are vital issues to be taken care for a sustainable sustainably enhanced production system. Genetic improvement approaches involving high throughput phenotyping and genomics-assisted breeding enhancing resource use efficiency, stress tolerance, yield has become imperative. Precise crop health monitoring is one of the keys to the modern production system. Obviously, disease forecasting and surveillance systems are in great demand to adopt precise management against the losses caused by diseases. Predicting disease risk at regional and global scales is of great interest for on-farm management and for assessment of agricultural policies and practices.

Abstract

Ten pests belonging to six insect and mite orders were recorded infesting strawberry cv. Chandler in Paonta and Doon Valleys of North Indian during 2001-04. Out of these Heliothis armigera Hubner, Spodoptera litura F., Thrips tabaci  Kheg, Holotrichia insularis Brenke, Odontotermes obesus Ramb and Tetranychus telarius L were of primary significance. Two fortnightly application of endosulfan (0.05%) from mid April proved effective in containing the attack of first two most devastating pests.

Introduction

Increased food production is required to ensure food security in the face of the rising world population. The strategy will include cropping of the rising world population. The strategy will include cropping of the new geographical areas and increase in the per hectare crop yields, through better crop management; losses of the food in storage will have to be minimized.

The food grains and their products are susceptible to deterioration by a variety of biotic and abiotic factors. These include the high temperature, moisture, micro-organisms, mites, insects and rodents. Together they account for loss of about 25% of food grains worldwide. The losses are highest in the tropical and sub-tropical areas where conditions are relatively conductive for rapid growth and multiplication of the organisms that cause damage to the food materials, especially insects. Reliable pesticide and storage techniques are required for limiting the damage to food grains in storage in most of the developing countries of the areas.

Insect pest control includes all measures adopted to make the life of insects hard and ultimately to destroy them or to prevent their multiplication and spread. Such measures can be taken up before the appearance of the pests or after occurrence of the pests. To achieve this purpose, it is quite necessary to know the factors which favor the occurrence of the pests and acquire enough knowledge about the nature and life cycle of the pests, the vulnerable growth stage at which they can be effectively destroyed and appropriate measures of control. Control measures may be either preventive or direct.
Insect pest control is broadly classified under two different heads viz., natural control and applied control.

I. Natural control
    1.    Climatic conditions. Temperature, rainfall, sunshine etc.
    2.    Physical or topographic factors. Mountains, oceans, rivers, lakes, forests, deserts etc.
    3.    Natural enemies. Parasitoids, predators including insects, birds, mammals, reptiles etc.
    4.    Disease causing organisms or parasites. Entomophagous fungi, bacteria, viruses and other microorganisms.

Taxonomy is the science of identifying (discovering), describing, naming and classifying organisms. It is a complex summing up of knowledge starting with thorough analysis to base the synthesis that will end up in the name of a taxon. Correct identification of biological taxa is a necessary pre-requisite to all other enquiries about the biological world.

Taxonomy is the science of identifying (discovering), describing, naming and classifying organisms. It is a complex summing up of knowledge starting with thorough analysis to base the synthesis that will end up in the name of a taxon. Correct identification of biological taxa is a necessary prerequisite to all other enquiries about the biological world. Taxonomists attempt to divide the world of living things (biodiversity) into distinguishable entities (taxa-such as species, genera, and families), develop tools (e.g., identification keys) to allow others to recognize and identify these taxa, and organize the described taxa within a hierarchical classification system that reflects evolutionary relationships. The outcomes of taxonomy are, therefore, very practical in terms of providing tools to facilitate identification, an infrastructure for organizing biological information, and a universal language for communicating information about the identity and classification of biological entities. Thus, naming and ordering of objects into groups is probably the most fundamental step in the development of scientific principles. Taxonomy identifies and enumerates the components of biological diversity providing basic knowledge underpinning pest management (Ramaraju and Pratheep, 2008). 

Introduction

The introduction of high yielding varieties and hybrids in late sixties led to accumulation of insect pest problems in cereals. The varieties and hybrids developed during green revolution era with the sole objective to enhance production to feed increasing population were better in quality parameters than traditional locals but were highly susceptible to insect pests. Over 200 pests attack different cereals and insects that were not known or were of minor importance have now become major pests and several new insect pests have appeared on cereals. Out breaks are frequent due to several obvious reasons. Major pests are serious, perennially occurring and persistent species which cause considerable loss in yields every year in large areas require control measures. Occasional pests attack the crops sporadically but cause potential damage and sufficient loss, though in some localities or only in some seasons, so as to warrant human intervention.

10.1 Introduction

Grain legumes such as chickpea, pigeonpea, cowpea, field pea , lentil, ,  and Phaseolus beans are the principal source of dietary protein among vegetarians, and are an integral part of daily diet in several forms worldwide. They are an important component of cropping systems to maintain soil fertility because of their ability to fix atmospheric nitrogen, extract water and nutrients from the deeper layers of the soil as compared to cereals, and add organic matter into the soil through leaf drop. However, grain legumes are mainly grown under rainfed conditions and the productivity levels are quite low mainly because of severe losses due to insect pests and diseases.  Average grain yield of pulses (0.86 t/ha) is only about one-fourth the average yields of cereals (3.54 t/ha).  Production and productivity of grain legumes is constrained by several biotic and abiotic factors, and suffer an average of 31.9 to 69.6% loss in crop productivity due to insects, diseases, drought, weeds,  and soil fertility. Pod borers (Helicoverpa and Maruca), Fusarium wilts, viral diseases, Ascochyta blight and Botrytis gray mold (Chen et al., 2011).

1. Introduction

Over the centuries, the use of medicinal herbs has become an important part of daily life despite the progress in modern medical and pharmaceuticals research. It is estimated that 40% of the world populations depends directly on plant based medicine. India is one of the world’s 12 biodiversity centres. Herbal industry in India uses about 8000 medicinal plants. Indian export of raw drugs has steadily grown at 26% to Rs.165 crores in 1994-’95 from Rs.130 crores in 1991-’92 and this is likely to touch US $5 trillion by 2050. Thus, India has a great role to play, as supplier of herbal products not only to meet the domestic needs, but also to take advantage of the tremendous export potential.

Biotic stress related problems are important bottlenecks for the successful commercial cultivation of any crop. Medicinal plants are not the exception and are vulnerable to be attacked by several pests and pathogens resulting crop loss in terms of both quantity as well as quality. Therefore, the “health of these healthy plants” should be concerned. Without proper identification and prior knowledge of the pests and diseases, the management will be a waste of time and money and can lead to further plant losses.

Introduction

Walnut is the oldest cultivated fruit in the world (Ozkan and Koyuncu, 2005). Juglans regia L., the Persian walnut, is probably native to a wide region extending from the Carpathian Mountains across Turkey, Iraq, Iran, Afghanisan and southern Russia to northern India. Species of walnuts, genus Juglans, are found in the forests of the eastern and southern parts of the USA, in Mexico and Central America, the Andean parts of Southern America from Columbia to Argentina, the West Indies, Japan, China, southern Asia from India to Turkey and southern Europe to the Carpathian Mountains of Poland (McGranahan and Leslie,1990). The trees are large and tall with round headed canopy. The rather smooth, light coloured, large nuts are free of the hull at maturity. Shell thickness varies from paper–thin to very thick and hard. The Greeks probably obtained J. regia from Persia from where, the seeds were transported to Rome, where they were known as Jovis Glans, or Jupiter’s acorn, from which comes Juglans. From Italy, it spreaded to what is now France, Spain, Portugal and southern Germany. Trees of the species were in England by 1562, and were bought to America by the earlier settelers. The American colonists are said to have called the species English walnut to distinguish it from the eastern black walnut, J. nigra. It is generally prefer to call it Persian walnut as it is associated with the place of origin bit commercially, it is called as English walnut. The term Carpathian walnut is sometimes used to refer to cold hardy Persian walnuts (Forde and McGranahan,1996). The other important species are J. ailantifolia Carr. syn. J. sieboldiana Maxim. (Japanese walnut), J. nigra L. (American black walnut), J. cinerea L. (butternut), J. microcarpa Berlander (Texus Black walnut), J. major Heller (Arizona black walnut), J. californica S. Wats (Southern California black walnut) and J. hindsii Jeps. (Northern California black walnut).

Protected cultivation practices can be defined as a cropping technique wherein the micro environment surrounding the plant body is controlled partially or fully as
per plant need during their period of growth to maximize the yield and resource saving. Cultivation of vegetables under protective structures such as net houses has become popular in recent years (Kaur et al., 2004; Cheema et al., 2004; Singh et al., 2004).

Protected cultivation practices can be defined as a cropping technique wherein the micro environment surrounding the plant body is controlled partially or fully as per plant need during their period of growth to maximize the yield and resource saving. Cultivation of vegetables under protective structures such as net houses has become popular in recent years (Kaur et al., 2004; Cheema et al., 2004; Singh et al., 2004). This enables, farmers to produce vegetables in the off-season, when fresh produce usually fetches higher price in the market.

Insect pests cause huge losses ranging from 5 to 80% of even up to 100%. Acute food shortage following world war –II and Bengal famine (1943) due to failure of rice crop due to a paddy disease indicate the severity of the loss, caused by the pests and diseases. The insects in storage on an average consume and spoil an additional 4 million tones of grains every year. All this indicates the importance of plant protection by which we can save millions of tones of food grains which are otherwise eaten away by different pests. Losses due to insect pests in Indian agriculture are 23.3 per cent. One of the practical means of increasing crop production is to minimize the pest associated losses.

A pest is any organism which occurs in large numbers and conflict with man’s welfare, convenience and profit.

Pests are often controlled with man made chemicals which have many harmful effects, for example:

Chrysanthemum (Chrysanthemum spp.), popularly known as “mum” or “guldaudi”, is a major commercial ornamental plant grown for cut flowers, loose flowers, and garden display. Belonging to the family Asteraceae, it is valued for its vibrant colors, diverse flower shapes, and long vase life. Chrysanthemum is attacked by several insect and mite pests, affecting both foliage and floral quality, leading to reduced aesthetic and commercial value.
Distribution: Widely distributed in India wherever chrysanthemum and sunflower are grown.
Biology: The eggs are laid singly on the upper surface of leaves, obliquely inserted into the tissue, with opercula appearing as whitish or brown dots. The incubation period for the eggs lasts about 5 to 7 weeks. Following hatching, the nymphs undergo hemimetabolous development (no true pupal stage). The nymphal period spans 2 to 3 weeks, during which the nymphs moult five times before reaching adulthood. Adult insects are approximately 4 mm long, with blackish bodies and lace-like transparent wings (Rizkawati et al., 2023).

Use of insect-resistant varieties in integrated pest management is an economically and ecologically sound alternative to synthetic pesticides. A large number of germplasm lines of different fruit crops have been evaluated for resistance to pests, and a few genotypes with resistance to insects, mites and nematodes have been identified. The resistance of “Winter Majetin” apple variety against woolly apple aphid, Eriosoma lanigerum (Hausmann) was the first report of innate resistance to insect pests in fruit crops. Another successful example was the resistance to grape phylloxera, Daktulosphaira vitifoliae (Fitch), in which the susceptible European scions (Vitis vinifera) were grafted onto the resistant American rootstocks (Vitis labrusca) in late 1800s. Various leaf characteristics, such as hairiness, pubescence, thickness of veins, sponginess, stomatal density and fruit characteristics such as rough skin, have been reported to confer resistance to insect pests. High content of phenols, flavonols, potassium, calcium, and low carbohydrate and nitrogen contents have also been reported to confer insect resistance in various fruit plants. The germplasm has been screened against various pests under natural as well as artificial infestations. In apple, rootstocks (MM-series) resistant to woolly apple aphid have been developed. Molecular markers for three genes that confer woolly apple aphid resistance are located on two linkage groups (LG). Low infestation of the woolly apple aphid has also been recorded in Golden Delicious variety which incidentally is the most preferred host of apple fruit moth. The scab resistant apple selections, HCR21T200, HCR23T125, S80ER21T72 and TSR16T223 have also been found to be resistant to the European red mite, Panonychus ulmi (Koch). Peach varieties such as Flaming Gold, Stark Early Giant, Early White Giant and Flavour Crest are moderately susceptible to the peach leaf curl aphid, Brachycaudus helichrysi (Kalt.). Peach cultivar, Matchless has been reported tolerant to flat headed stem borer, Sphenoptera lafertei Thomson. Early maturing varieties of peach are reported to escape the fruit fly, Bactrocera dorsalis (Hendel) damage while Nemaguard, and Nemared rootstocks are resistant to important nematode pests. Almond varieties, Briggs Hard Shell, Katha 85, Ribba Selection and Tree No. 55 have been reported free from peach curl aphid infestation.

2.1. Guidelines for Pest Risk Analysis

This standard describes the process of pest risk analysis for plant pests for the purpose of preparing phytosanitary regulations by National Plant Protection Organizations. Pest risk analysis (PRA) consists of three stages: initiating the process for analyzing risk, assessing pest risk, and managing pest risk.

Initiating the process involves identification of pests or pathways for which the PRA is needed. Pest risk assessment determines whether each pest identified as such, or associated with a pathway, is a quarantine pest, characterized in terms of likelihood of entry, establishment, spread and economic importance. Pest risk management involves developing, evaluating, comparing and selecting options for reducing the risk.

PRA is only meaningful in relation to a defined “PRA area” considered to be at risk. This is usually a country, but can also be an area within a country, or an area covering all or parts of several countries [e.g. the area covered by a Regional Plant Protection Organization (RPPO)].