eChapters

In the physical methods of preservation, fruits and vegetables are preserved by (i) adding heat, (ii) removing moisture content of produce to prevent spoilage and (iii) irradiated by Gama rays which kill the microorganisms responsible for spoilage of foods. These methods are described below.

Processing and Preservation by Adding Heat or Heating

In this method, heat treatment is given to destroy the microorganisms which are responsible for spoilage of the produce. Heat treatment is given by many methods.

The presence of humic acids, fulvic acids, metallic ions, suspended matter, plankton, weeds, and industrial effluents all contribute to the colour of natural water.

Three fundamental processes that are responsible for inducing changes in weather are transfer of heat, energy and mass. The Sun, whose inter-surface temperature is estimated to be around 6000°C emits heat energy in the form of solar radiation which is received at the earth’s surface after it is partly depleted in the atmosphere. Therefore, it is essential to understand the processes that govern the transfer of heat in the earth-atmosphere system.

3.1 Conduction

The transfer of heat from one point to another point within the material medium without the actual movement of the particles in the medium is called conduction i.e. the heat energy transfer is conducted by the particles in the medium from hot end to cold end. If a metal rod is heated at one end, the other end of rod becomes hot gradually due to transfer of heat by conduction. In the earth atmosphere system, conduction of heat is observed at the ground surface only. The amount of heat energy transferred due to conduction (Q) is

Abstract

The chapter aims at introducing selected physical properties of food and biological materials in food process and application in the field of food technology. These physical properties of food are not only used for designing of food equipments but can also maintain the nutritive value of food to a greater extent during processing in these equipments.

Introduction

The investigation of food engineering is spotlighted on the inspection of equipments and system used to process food materials on a commercial scale. Building of system for food materials can be efficient if two factors are known, the nature of the food product and what happen to the food during its processing. Food materials are organic in nature and it has a certain kind of qualities which recognize them from other processed food product. Since food materials are organic in nature, they have (a) shapes usually found in normally non regular; (b) properties which differ from other food products; (c) heterogeneous arrangement; (d) properties are varied due to climatic conditions, ripening conditions, etc. and (e) several other factors such as (e) influenced by chemical changes, moisture content variation and enzymatic movement. Managing food materials with these remarkable attributes requires extra thought, for the most part by implication and extra sources or reasons for different varieties. The attributes of a food material that are autonomous of the on looker, quantifiable, can be measured, and characterize the condition of the material (yet not how it accomplished that state) are considered as its physical properties.

Abstract

Physical properties of food are aspects such as colour, structure, texture, rheology and interfacial properties, and composition. We have a range of instrumental methods for objectively characterising and measuring food structure and physical properties. These are useful for applications such as new product development, benchmarking, reformulation and specification.

Colour

Consistent and accurate measurements of the colour and visual appearance of food products is extremely important. Various methods are available for colour measurement, allowing a wide variety of sample types to be measured. Colour measurement results are typically provided on the CIELAB scale. Others are available on request.

The primary constituents of milk are water, fat, protein, sugar (lactose), minerals, vitamins, and enzymes. Milk is a thin emulsion made up of two phases: A continuous aqueous colloidal phase and a dispersed phase of oil or fat. It is an opaque white liquid containing fat in an emulsion, protein, and a few minerals in a colloidal suspension, and lactose along with soluble proteins and a few minerals in a true solution. The physical characteristics of milk are comparable to those of water, but they are altered by the degree of dispersion of the colloidal and emulsified components as well as the presence of different solutes, such as salts, lactose, and protein, in the continuous phase.

Physical Appearance, Color and Optical Properties

Fat globules and casein micelles scatter light, giving the appearance of turbid and opaque milk. The way that molecules scatter light has an impact on optical characteristics. When the wavelength of light and the particle’s magnitude coincide, light scattering happens. Consequently, light with shorter wavelengths is scattered by smaller particles and vice versa. Because casein micelles scatter blue light more than red light at shorter wavelengths, skim milk appears slightly blue. Cow’s milk has a creamy color because of beta- carotene, a carotenoid precursor to vitamin A. The greenish tinge in whey is due to the presence of riboflavin. Turbid and opaque due to scattering of light mainly by protein micelles and fat globules.

Abstract

Multi-commodity flours were prepared by blending rice flour, mung flour and potato flour with wheat flour in ratios of 0:0:0:100, 5:5:5:85, 10:10:10:70 and 15:15:15:55, respectively and packaged in glass jar, high density polyethylene and aluminium flexible packaging for biscuits development. The standardized formulations for biscuit had ingredients as 100 g flour/multi-commodity flour, 45 g sugar, 45 g hydrogenated fat, 1.25 g sodium bicarbonate, 1.25 g baking powder and 1.0 g curry leave powder. The biscuits were baked in convective baking oven at 180 > C for 10-15 min till baked. The well baked biscuits were removed from the oven, cooled to room temperature, packaged and stored under ambient condition. The physical quality (Mass, thickness, diameter, spread ration percent spread and bulk density), of biscuits were analyzed just after preparation under ambient condition. Results were also reported that the spread ratio of multi-commodity flour biscuits increased with decrease in the incorporation of wheat flour in multi-commodity flours. It is clear that spread ratio is mostly influenced by the diameter and thickness of biscuits.

2.1. Soil structure

Important physical properties of soils

Soil texture

Soil structure

Surface area

Soil density

The major components of soil consisting with mineral and organic matter, water and air produces a three phase systems of solid, liquid and gas. Many of the soil properties influencing crop growth and other uses depend mostly on the relative proportions of these components as well as the size, shape and arrangements of the solid matters. The physical properties of soil have strong significance in sustaining agricultural productivity. Fertiliser alone or in conjunction with suitable crop varieties and plant protection measures cannot be sufficient towards improving crop productivity unless the soil physical properties are maintained at satisfactory level. Improvement and restoration of physical properties in soil are necessary for protection of soil resources against degradation. The physical properties of soil discussed in this chapter includes soil densities, texture, structure, porosity and consistency of soils and colour of the soil.

Physical properties of wood

The versatility of wood is demonstrated by a wide variety of products. This variety is a result of a spectrum of desirable physical characteristics or proper ties among the many species of wood. In many cases, more than one property of wood is important to the end product. For example, to select a wood species for a product, the value of appearance-type properties, such as texture, grain pattern and color, may be evaluated against the influence of characteristics such as machinability, dimensional stability and decay resistance.

This chapter introduces the physical properties that determine the performance, processing behaviour and end use of wool. It examines fibre diameter, crimp, length, strength, elasticity, resilience, moisture regain, felting behaviour and thermal characteristics. The chapter relates these properties to spinning, fabric construction, comfort and durability. It also explains objective measurements and quantitative descriptors such as coefficient of variation and staple strength, providing a scientific foundation for evaluating wool quality and predicting its suitability for different textile applications.

Physical purity test determines the proportion of pure seed, other crop seed, weed seed, inert matter, moisture and germination components in the seed lot by weight in percentage in accordance to prescribed Seed Standards. It thus, helps in improving the plant stand, raising a pure crop by eliminating other crop seeds, weed seeds and disease free-seeds. Seed must not be sold until the percentage of pure seed, other crop seed, weed seed, and inert matter are in accordance to seed physical purity standards. Physical purity test is required for seed certification or seed law enforcement and it is a pre-requisite for ger- mination test.

In the wildlife conservation and management, restraint and handling of wild/zoo and exotic animals play a prominent role. Zoo veterinarian has to deal with animal handling on a regular basis for various purposes like routine health checkup, research purpose (assisted reproductive techniques, blood collection for genetic health analysis, radio-collaring), or for conservation and management purposes (capture of problematic animals, translocation. introduction and reintroduction) and for the marking of animals. So, proper management called for good restraint in wildlife.

Wool is a natural fiber and considered as renewable, sustainable and environmental friendly. It is capable to keep the body warm and can be utilized as casual bears and also in formal bears and provide comfort to the human body in both of the active and passive situations. So to maintain a standard quality of wool for fabric development it is utmost important to test the wool fiber for certain qualities. Testing of wool fiber is also important to retain the unique physical and chemical properties of wool which makes this fiber versatile. Fiber quality is in real sense is a set of characteristics and defects in the fleece; both inherited and acquired, which influence its end use. The term quality testing includes a process of critical examination of material to draw the information’s related to qualitative or quantitative aspects of wool fibers. There are number of standard test procedures are in prevalence but most commonly followed test procedures for wool are American Society for Testing Materials (ASTM), British standards, Indian Standard Institution (ISI) or International Wool Textile Organization (IWTO) etc.

Snack foods have become an essential part of the diet throughout the World and they are prepared from natural ingredients or components to yield products with specified functional properties. Extrusion cooking technology getting more popularity over other traditional processing technologies because extrusion shows continuous efficient cooking, mixing and forming process.

Physico-chemical and microbiological quality of meat and aquatic food and food products gives its overall safety and quality status as a food. The physico-chemical and microbiological qualities of raw material have great importance on the product development. It also affects the shelf life of the raw material as well as final product.

Fresh meat is a type of meat which has not been subjected to any processing whereas raw meat is a fresh meat which has undergone freezing. The qualities of fresh meat are important as far as merchandiser, purchaser and consumers are concerned and it is also important for adaptability in further processing. The important quality parameters of fresh meat are:

Introduction

India is having very rich sources of inland water bodies in the form of river, lakes and reservoirs. The reservoirs are constructed by impounding the river system. The reservoirs are constructed for effective utilisation of water for irrigation, power generation and flood control. Reservoir fishery in India is also important from socio-economic point of view as it has the potential of providing employment to about two million people, Kaushal and Sharma (2001). Total area under the reservoirs in India is 3:1 million ha and it is expected to double by 2020. This includes 19,000 small reservoirs with a total water surface area of 14,85,557 ha and about 180 medium and 56 large reservoirs of 5,27,541 and 11,40, 268 ha area respectively.

The Maharashtra is endowed with an area of 1,79,430 ha under reservoir and the Maharashtra produces 516 tonnes of fish through reservoirs. The state fisheries corporation was operating in 6,272 ha of reservoirs and marketing the catches.

Abstract

The seaquake on 26^th December 2004 with its epicenter at Sumatra triggered a tsunami, which had a major impact on South East Asian countries. During that incident, the average height of the tsunami wave was 7-10 m and the penetration of seawater was up to 1-1.5 km. The surface water resources meant for irrigation and other drinking purposes got affected by the ingress of seawater in many areas. The direct environmental impacts of the tsunami have more impact along the entire east coast and caused more damages in coastal systems. The physical and chemical perturbations caused in the coastal zone by the tidal waves are discussed. In order to assess the environmental impact on coastal system, it is suggested that significant physical and biogeochemical factors could be framed to quantify the problems.

Keywords: Tsunami, Physical and Chemical Alterations, Coastal zone.

Abstract

Fats and oils are one of the five essential ingredients of human diet and the others are protein, carbohydrates, minerals and vitamins. The oil seeds are major source of edible in world. Oils and fat form an important constituent of human food. Lipid metabolism generates many bioactive lipid molecules, which are fundamental mediators of multiple signaling pathways and they are also indispensable compounds of cell membranes. Many people in developing countries, especially children under five years of age suffer from acute or chronic protein and energy shortages. There is definitely a need for food production to keep pace with the increase in the number of the world’s population. Oilseed and nut should be properly dried before storage, and cleaned to remove sand, dust, leaves and other contaminants. All raw materials should be sorted to remove stones and moudly nuts. Some moulds, especially in the case of groundnuts, can cause aflatoxin poisoning.

Introduction

Oil has been a vital part of people’s regular dietary consumption all over the world and its usage has been found to increase several folds over the decades. The importance of using the appropriate oil for cooking goes a long way in affecting the consumer’s health. Improper methods of oil-aided cooking can lead to cardiovascular diseases and increased cholesterol in the blood (Kumar et al., 2018). There is definitely a need for food production to keep pace with the increase in the number of the world’s population. In order to achieve these national development strategies in many based economy tropical countries on agriculture and biased now towards increasing diversity of food products and consumer in order to alleviate malnutrition and pressure to strengthen and expand based industries on agriculture to ensure that their products are both healthy and safe. Oils and fats for food have used a variety of other applications since prehistoric times, and were easily isolate the source of the fats and oils found useful because of its unique properties.

Abstract

Four bread wheat varieties (PBW-138, PBW-299, PBW-343 and PBW-373), two of durum wheat (PDW-215 and PDW-233) and two of triticale (TL-419 and TL-1210) were milled to obtain 70 percent extraction flour.  The grains and the flour samples of all the varieties were evaluated for proximate composition, rheological properties and pretzel making. Physical properties of durum wheat were better followed by bread wheat and triticale. Durum wheat were harder, had higher grain weight than bread wheat and triticale.  Protein, ash, fat, total sugars and enzyme activity were higher in triticale flour than bread and durum wheat flours while durum flour had higher pigments (ppm, b-carotene). Bread wheat flour was intermediate between durum and triticale flours with respect to fineness. Rheological studies revealed triticale flour to be the weakest flour. Pretzels prepared by using optimized recipe and method revealed PBW-343 and PBW-373 best for pretzel making.