eChapters

3.1. INTRODUCTION

In this chapter, we will study the measures of central tendency which is a numerical method to explain the data in brief. We can see examples of summarizing a large set of data in day to day life like average marks obtained by students of a class in a test, average rainfall in an area, average production in a factory, average income of persons living in a locality or working in a firm etc.

One of the most important objectives of statistical analysis is to get one single value that describes the characteristic of the entire mass of data. Such a value is called the central value or an ‘average’ or the expected value of the variable. This single value is the point of location around which individual values cluster and, therefore, called the measure of location. Since this single value has a tendency to be somewhere at the center and within the range of all values it is also known as the measure of central tendency. The purpose of computing an average value for a set of observations is to obtain a single value which is representative of all the items.

Agriculture has been the base of subsistence for human settlements on the planet earth. According to the Food and Agricultural Organization (FAO), people in the developing world where the population increase is very rapid, may face hunger if the global food production does not increase by 50–60%. Contribution from developing countries and developed countries to world production in 1975 was about 38% and 62%, respectively. If yield increase is keeping pace with increasing population, mass hunger can escape. In the preindependence period, Indian agriculture was usually described as a gamble with monsoons and their failures resulted in widespread famine and misery. In the last few decades, Indian agriculture has made a remarkable progress even with increased population and decreased per capita availability of agricultural land. World population is projected to be over 8 billion by 2025 and nearly 10.5 billion by the end of next century. To maintain the status quo, food production needs to be doubled. Estimates by the FAO and WHO (1992) and the Hunger Project (1991) suggest that around 1 billion people in the world have diets that are ‘too poor to abstain the energy required for healthy growth of children and minimal activity of adults’. The causes are complex and it is not entirely the fault of overall availability of food. Modern agriculture begins on the research farm, where researchers have access to all types of inputs for crops at all the appropriate times. But, even the best performing farms cannot match the yields of researchers. For high productivity, farmers need to have access to the whole package – improved seeds, water, labour, capital or credit, fertilizers, pesticides and other developed technology. Many poorer farming households simply cannot adopt the whole package. Very often delivery systems are unable to supply them on time.

2.1 Definition and Concept

An operating system (abbreviated as ‘OS’) is the program that, manages all the other programs in a computer. Every general-purpose computer must have an operating system. It provides support for the loading and execution of other programs which are known as Application Programs.

Introduction

Instead of using soil, the unique technique of hydroponics grows plants in a nutrient-rich water solution. Using a tightly controlled environment, gardeners may optimise factors including sunlight, pH balance, and nutrient levels to maximise plant development in this agricultural approach. Hydroponics allows plants to grow more quickly and produce more by delivering nutrients straight to their roots. Water efficiency, less soil-borne disease risk, and the capacity to grow crops in non-arable or urban areas are just a few of the benefits of this technology. More and more people are turning to hydroponics as a means to grow their own food in a more regulated and efficient manner, all while reducing their impact on the environment.

1.1 Introduction

Gender permeates every facet of society, influencing power dynamics, access to resources, and opportunities. Understanding gender requires not only defining its conceptual framework but also acknowledging how these concepts manifest in everyday life, often creating deep divisions. Gender divides whether in education, employment, health, or political participation are enduring realities that reflect the unequal distribution of opportunities and rights between men and women, as well as between those who identify beyond the binary. These divides are more than social phenomena; they have concrete economic, political, and developmental impacts. Recognizing the persistent gaps in access and outcomes between genders has led to the development of gender-sensitive policies, such as gender budgeting. Gender budgeting is a critical tool for addressing these divides by ensuring that public resources are allocated equitably to benefit all genders. By focusing on the differential impacts of policies and budgets on women, men, and gender minorities, governments and organizations can work toward creating more inclusive and fair societies.

This chapter will introduce key gender-related concepts that form the foundation for understanding how gender influences social, economic, and political life. It will explore the roots and ramifications of gender divides across various sectors and explain how gender budgeting is employed as a strategic approach to reduce these disparities. Through this exploration, we will highlight the importance of integrating gender perspectives into policy and resource distribution to foster equity and social justice.

1. Introduction

Climate change includes higher temperatures, changes in rainfall patterns, alterations in the frequency and distribution of weather events such as droughts, storms, floods, and heatwaves, sea-level rise, and the consequent impacts on human and natural systems (Riedy, 2018). Climate is the average weather in a given area over a longer time. A description of climate includes information on, for example, “the average temperature in different seasons, rainfall, and sunshine. Also, a description of the chance of experiencing extremes is often included. Climate change is any systematic change in the long-term statistics of climate variables such as temperature, precipitation, pressure, or wind sustained over several decades or longer. Climate change can be due to natural external forcings (changes in solar emission or changes in the Earth’s orbit, natural internal processes of the climate system), or it can be human-induced” (Buonocore, 2022).

INTRODUCTION

By the turn of the century, consumers have been more demanding, sophisticated and discretionary. They want much safer, higher quality, and more convenient to foods. The food processor need to get the best from their existing processing technology in addition to looking for newer ones. New and alternative food processing methods and/or novel combinations of existing methods are continually being investigated by the industry in pursuit of producing better quality foods more economically. Thermal processing is one of the most important food preservation techniques that was first introduced at the beginning of 1800 and has evolved itself in to one of the most scientific mature food processing techniques of recent times. Both science and technology have gone through tremendous transformation in the last two centuries and today it is the most reliable method to assure food safety and stability. Developments in thermal processing and evolution of non-thermal processing technologies like high pressure processing, pulsed electric field, pulsed light etc. have enhanced the utility of thermal processing principles and increased the awareness of possible alternative processing technologies.

5.1 Introduction

In recent decades, human induced changes in climate of the earth have the focus of scientific and social attention. The most imminent of this is the increased concentration of greenhouse gases (GHGs) namely, carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) in the atmosphere. The concentration of CO₂, CH₄ and N₂O have increased markedly by 30%, 145% and 15%, respectively as a result of human activity since 1750, the era of Industrial Revolutions (IPCC, 2007). Between 1750 and 2005, the concentration of CO₂, CH₄ and N₂O in the atmosphere has increased from 280 to 379 ppm, 715 to 1774 ppb and from 270 to 319 ppb, respectively (IPCC, 2007). However, there was a steep increase during the recent years i.e. 70% increase of GHGs between 1970 and 2004.

Abstract

Seaweeds are the large marine algae that grow almost exclusively in the shallow waters at the edge of the oceans. Seaweeds are rich sources of many bioactive compounds and nutraceuticals. These factors are considered under two categories: Seaweed phytochemicals and Seaweed polysaccharides. They are rich in soluble dietary fibers, proteins, minerals, vitamins, antioxidants, phytochemicals, and polyunsaturated fatty acids, with low caloric value. The red, brown and green seaweeds have been shown to have therapeutic properties for health and disease management. Usually they are only used as gelling agent and stabilizers in the food and pharmaceutical industries, but current research has revealed their potential medicinal uses against many diseases like cancer, allergy, diabetes, oxidative stress, inflammation, thrombosis, obesity, hypertensive and other degenerative ailments. In line with other natural foods like fruits, vegetables and grains, there has been marked interest within the scientific community to assess which fractions of seaweeds may be linked to the historically observed health benefits. As consumer health and nutrition become more influential in the food industry, the use of seaweed as an ingredient is on the rise in product development. For several centuries there has been a traditional use of seaweeds as food in China, Japan and the Republic of Korea. This review undertakes successful exploration of potential of seaweed gums as an functional ingredient in a number of food applications. This addition has the potential to enhance the nutritional quality of a product and hence human health.

ABSTRACT

Wetlands play an important role in provisioning of numerous goods and services for mankind. However, the type and the quantum of ecological services differs amongst wetlands. In the present study, we documented the various plant resources used by the riparian communities of two well-recognized wetlands, Dhir beel and Diplai beel, located in Brahmaputra Valley of Assam. The findings of study indicate that the riparian communities are dependent on wetlands for various purposes. The riparian communities uses 48 plant species as vegetables, fruits, fodder, fuel wood, medicine, roofing materials, craft making materials, bio-fertilizer and fish poisoning agent. Some of the plant species such as Enhydra fluctuans, Lasia spinosa, Colocasia esculenta, Diplazium esculentum, Ipomoea aquatica and Monocharia hastata aresold in the village market as local vegetables. The wetlands generate income for the riparian communities and save cashof many households settled plant near the wetland. Nevertheless, this study also revealed that some near the wetland resources are declining due to population pressure, encroachment near the wetlands, deforestation and over-exploitation of the wetland habitats for creation of many fishery ponds within the wetland and cultivation practices on wetland edges. The socio-economic condition, unemployment, easy accessibility and lack of alternativesources are plausibly themajor factors, whichare leading to the decline and depletion of the wetland resources. Therefore, appropriate management strategies are required for the conservation and the sustainable utilization of these plant resources.

ABSTRACT

Fruits and vegetables are rich source of bioactive compounds such as polyphenols, antioxidants and flavonoids. Drying is one of the common methods for preservation of food and agricultural commodities. However, drying may negatively affect the product quality attributes. This article is a capsule overview of current state of art ultrasound (US) assisted drying on technical aspects and bioactivity of fruits and vegetables. US assisted drying is an economical and sustainable technique compared to other existing conventional techniques used for food processing and preservation. US as a pretreatment before drying of agricultural-products enhances drying efficiency, inactivate enzymes and improve overall quality of dried products. Current developments and available solutions in drying have shown that US assisted drying may be used to restrict the loss of crucial bioactive components occurring naturally in fruits and vegetables. US when combined with hot air drying helps in achieving adequate drying rate at lower temperatures and improves overall dehydration process. This technique has found no practical application commercially due to various difficulties in achieving high-intensity US in air. One practical benefit of using US assisted drying is the minimization of the drying time along with reduction in total energy consumption.

The world population is expected to reach 9 billion by 2050. This population growth of 2 to 3 billion people over the next 30 years, combined with the changing diets, would result in a predicted increase in food demand of around 70% by 2050 (UNDESA 2009).

Introduction

More and more people are turning to indoor gardening as a fun and functional way to experience nature without leaving the house. A wide variety of plants may be cared for in the comfort of one’s own home by using this method. Indoor gardening may be adjusted to fit any space, whether it a little flat or a large mansion. Improving air quality, adding a supply of fresh herbs, veggies, or colourful flowers, and increasing interior aesthetics are just a few of the many advantages. Regardless of the season or environment, indoor gardeners are able to produce a broad range of plant species thanks to the comfort of regulated temperature and lighting. In addition, tending to houseplants may be a calming hobby that pays dividends in the form of a feeling of achievement and peace of mind.

1. INTRODUCTION

In general, seed dormancy refers to lack of growth due to any external or internal cause. It also refers to a state in which viable seeds fail to germinate even when given favourable environmental condition i.e. adequate moisture, appropriate temperature regime, a normal atmosphere and in some cases light.

There are various degrees of dormancy varying from very slight to very strong (deep). Sometimes the development or degree of dormancy changes during the lifetime of the seed, usually as a response to external conditions. Hence, dormancy may be innate, develop, be broken and redevelop in seed.

Several types of dormancy exist, and sometimes more than one type of dormancy occurs in the same seed. In nature, dormancy is broken gradually or by a particular environmental event. The type of event that may break dormancy depends on dormancy type. Dormancy caused by a hard seed coat may be overcome by a gradual or an instant abrasion, and darkness induced dormancy by exposure to light. In seed handling, the natural dormancy breaking mechanism is applied or simulated during the process of pretreatment. “Pretreatment” is a term used for conditions or processes applied to break dormancy prior to germination, while “treatment” is used for application of pesticides for control of pests and diseases.

12.1. Penicillium chrysogenum

Penicillium chrysogenum (Fig. 255) (previously known as Penicillium notatum), produces the antibiotic penicillin, known as WONDER DRUG.

The antibiotics produced from fungus Penicillium is listed in table.

Sweet pea (Lathyrus odoratus) is the only species in the genus Lathyrus and family Fabaceae which is widely cultivated as an ornamental plant. Lathyrus comes from the Greek word “Lathyros” in which the prefix “la” means “very” and suffix “thyros” means “passionate”. The “Odoratus” is derived from Latin word which means “fragrant” (Fernald, 1950). It is mainly grown for its beautiful flower colour forms. It is an annual climbing plant growing to a height of 1-2 m with the support of a terminal tendril which twines around the plants and helps to climb. The illness caused by the ingestion of sweet pea is known as odoratism or sweet pea lathyrism. Sweet pea was used to verify Mendel’s work with the garden pea (Pisum sativum L.) in the early 1900s (Bateson, 1902). The genetical phenomenon of linkage was first demonstrated in the sweet pea. It is used prominently as a model organism to study flower development due to its large, colourful and fragrant flowers. The essential oils extracted from the sweet pea can be used in perfume blends.

ORIGIN AND DISTRIBUTION

Sweet pea (Lathyrus odoratus L.) was discovered in Sicily in 1695 (Rice, 2002). Its species are found both in the Old World and the New World. The main centres of diversity are the Mediterranean region, Asia Minor and North America as well as temperate South America and East Africa (Kupicha, 1977, Jackson and Yunus, 1984, Yamamoto et al., 1984 and Simola, 1986). It generally grows in temperate regions and has been found on all continents except Antarctica (Kenicer et al., 2009 and Kenicer et al., 2005). Its cultivation is popular not only in the United Kingdom and the United States but also in Europe, Russia, Egypt, New Zealand, Australia and Japan (Hambidge,

1996, Inoue, 1981, 2007 and Rice, 2002). There are some reports of commercial sweet pea cut flower production (Hammett, 2006, Inoue, 1981 and Parsons, 2004). A seed bank at the Chichester Collection was started in 1998 and stores around 900 cultivars and around 100 accessions of other species.

7.1 Introduction

The current atmospheric CO₂ concentration is the highest during last 650,000 to 800,000 years (Luthi et al., 2008), and also probably in the last 20 million years (Pearson and Palmer, 2000). Since last two decades, it is increasing at a rate of about 2 ppm/yr with the current concentration of 389 ppm in 2010 (WMO, 2011). The current trend of energy use based on fossil fuel consumption may raise it to 900 - 1100 ppmby the end of 21^st century (Kiehl, 2011).

5.1 Introduction

According to Croxton and Cowden, “Either for one’s own use or for the use of other, the data must be presented in some suitable form”.

Now – a – days everybody uses tables in one form or another, and accountants use them quite often. The work become tedious, especially if you had to do for 12 columns for the 12 months of the year, and more so if there were some modification to be done after having set up the entire table. The Americans have a special name for such tables- spreadsheet which makes life easy.

Steve Jobs and Steve Wozniak two young Americans in 1976 AD developed the first desktop computer – The Apple which was not user friendly and needed programming for useful work. Dan Bricklin, Robert Frankston and Dan Fylstra proposed a program to turn the computer’s memory into a giant virtual spreadsheet where necessary corrections and modifications could be done fairly, quickly and easily and marketed the program in 1978 under the trade name VisiCalc. VisiCalc was soon succeeded by Sugercal and other computer programs which were more user friendly. The Lotus 1-2-3 designed and developed by Larry Kaplan put further step, which set the standard for many applications under the IBM, Now a days Microsoft under the leadership of Bill Gates had been working on the sidelines perfecting graphical user Interface (GUI) packages for the PC range of computers that would widen its reach. Now Microsoft office program Suite the integrated word processing, spreadsheet, presentation and data base management.

The spreadsheet package in Microsoft office is called Excel – our basic software, or program for this manual.

1. INTRODUCTION

In plants, seed dormancy is controlled by temperature, light and hormones. Unlike animals, which secrete hormones from special glands, hormones are always present in plant cells. Each plant hormone plays multiple roles, depending on the site of action, the life stage of the plant and the hormone’s concentration. A plant hormone is any chemical that is produced in one part of the plant that has a targeted function elsewhere. Certain hormones induce and keep seeds in a dormant state, while others cause seeds to break dormancy and initiate germination They are stored in regions where stimulus are and then released for transport through either phloem or mesophyll when the appropriate stimulus occurs. These are chemical messengers influencing many patterns of plant development

The first theory is that the five classic plant hormones, auxin, cytokinins (CKs), gibberellins (GAs), ethylene, and abscisic acid (ABA), plus the new plant hormones, brassinosteroids (BAs), and salicylates or salicylic acids (SAs) can be gathered into three groups. These are growth hormones, stress hormones and shock hormones. Auxin and CKs are growth hormones. Ethylene, GAs, and brassinosteroids are stress hormones. ABAs and SAs are shock hormones. All three types of hormones are similar in that they fall within the classic definition of an intercellular hormone. They are made by a cell and are meant to affect the behavior of other cells, either in nearby tissue or at the opposite end of the plant.

ABA, also known as abscisic acid plays a direct role in dormancy release and germination. Ethylene and the gibberellins group of hormones are indirectly involved.