eChapters

1. Collection of arthropods

a. Collection of arthropods from the host’s body: The collection of arthropods from the host’s body involves various techniques tailored to different species and circumstances. For instance, the extraction of small ectoparasites such as lice, fleas, and wingless keds typically employs usage of forceps with pointed tips for precision. In poultry, a method of brushing against the grain of feathers enables dislodgement of ectoparasites, which are then collected on a black surface for examination. A highly effective strategy for harvesting ectoparasites from small or deceased hosts, such as poultry, involves sealing the carcasses within a polyethylene bag. This confinement prompts ectoparasites to detach from the host and accumulate within the bag, facilitating subsequent collection using a brush. The retrieval of ticks to prevent the rupture of their mouthparts is achieved by straightening the tick forward and pulling backwards before extraction. These ticks are further placed in a tube sealed with a ventilated stopper or a gauze covered with cotton wool plug. The tubes ought to include paper for the ticks to cling onto, along with a labelled piece of paper. These tubes are stored in a cool and humid container for transportation to the laboratory. This container should be well-insulated and equipped with ice blocks or freezer packs as well as damp pads to sustain elevated humidity levels. It’s crucial to ensure that the ticks do not directly touch the ice. A sizable thermos flask can be utilized for this purpose. Mange mites, on the other hand, are obtained by conducting deep skin scrapings from the periphery of affected lesions, enabling the collection of specimens for analysis.

Nearly 19.9% of India's GDP (Statistics Times.com, 2021) and 54.6% (According to the 2011 census of India) of the people are employed in agriculture, which is important for the country's economy. Despite making up the majority of landowners, small and marginal farmers confront a number of obstacles including restricted access to government services, contemporary technologies, and financial choices. In addition, they frequently experience crop failures and are heavily dependent on shady middlemen and local loan sharks. Following the Y.K. Alagh Committee's recommendations, the Indian government introduced the idea of Farmer Producer Organisation (FPO) in 2001. These organisations are designed to empower small-scale farmers by giving them the ability to communicate directly with consumers and strengthen their negotiating position.

Small-scale farmer groups known as FPOs band together to promote their shared products and pool resources. In India, there are already over 7,300 FPOs registered, with over 1.5 million farmers joining. The Indian government wants to bring together over a million farmers under the FPO umbrella by setting an ambitious objective of 10,000 new FPOs being established by 2024–25.

Investment Appraisal Techniques

A financial evaluation/ appraisal of Project considers the possible compensations of completing the Project against the anticipated expenses. The assessment of the project will rely on several factors, including the Size of the project, time span of project etc. The motivation behind the financial evaluation is to decide if the project is advantageous, contrasting its expenses and its expected normal advantages. These methods are primarily designed to evaluate the effectiveness of a new project. This investment evaluation technique includes Payback Period, Internal Rate of Return (IRR), Net Present Value (NPV), Accounting Rate of return (ARR), Profitability index etc. Each of these techniques evaluates the project from various angles and provides very useful insights. Investment appraisal techniques are divided in two parts namely, discounted cash flow methods and non-discounted cash flow methods.

Non-Discounted Cash Flow Techniques

Future cash flows are not brought to their Present value through Non-Discounted Cash flow methods. Non-Discounted Cash flow methods are also categorized into the following two techniques.

Cancer, according to current opinion, is a multitude of different diseases and is no more a “one disease’. Myriads of tumour types and plethora of their patho-physiology in different species necessitates species wise study of tumours in detail. Of all species, dog develops neoplasms twice as frequently as humans, with incidence of skin and mammary tumours being the highest. Tumors of mammary gland are the most common tumors of female dog representing approximately 30-50% of all tumors in bitch and it is the second most common tumour in dog after skin neoplasms and most common malignant tumour in dog.

The term growth as applied to higher organisms such as animals commonly is concerned with increase in protoplasmic mass and does apply to reproduction or to increase in number. In microbiology the term refers to increase in the number of organisms. Bacteria increase in number by a process of simple binary fission. Each cell increase in size and redivide into two similar cells. Each of the divide cells may in turn divide to become two cells. Each division produces what is termed as new generation of cells, theoretically there are 2,4,8,16,32,64,128,256 cells in the 2,3,4,5,6,7,8,& 9th generation, this is known as logarithmic growth – the population doubles with each successive generation. Under favourable conditions, bacteria produce generation within 15min. Under unfavourable conditions 24 hours of more may be needed for each generation. Generation time for E.coli is 17 to 20 minutes.

Synonyms :  Splenic fever, wool sorter’s disease, Tarka
It is an  infectious disease of livestock and worldwide in distribution. This is a zoonotic disease. It is also  known as splenic fever because of enlargement of the spleen (splenomegaly).

Etiology : It is caused by a rod shaped bacteria of 4-8 µm X 1-1.2 µm known as Bacillus anthracis. It is non-motile, capsulated, aerobic, spore bearing and Gm+  in nature. The organisms  remain in chains. It was the first pathogenic bacterium to be observed under the microscope, the first communicable disease to be transmitted by inoculation of infected blood, the first bacillus to be isolated in pure culture and shown to possess spores and the first bacterium used for  preparation of an attenuated vaccine.

16.1. CANNED FOODS-PRESERVATION

Canning is a method of preserving food from spoilage by storing it in containers that are hermetically sealed and then sterilized by heat. The process was invented after prolonged research by Nicolas Appert of France in 1809, in response to a call by his government for a means of preserving food for army and navy use. Appert’s method consisted of tightly sealing food inside a bottle or jar, heating it to a certain temperature, and maintaining the heat for a certain period, after which the container was kept sealed until use. It was 50 years before Louis Pasteur was able to explain why the food so treated did not spoil: the heat killed the microorganisms in the food, and the sealing kept other microorganisms from entering the jar. Samuel C. Prescott and William Underwood of the United States set canning on a scientific basis by describing specific time-temperature heating requirements for sterilizing canned foods.

Most vegetables, fruits, meat and dairy products, and processed foods are stored in tin cans, but soft drinks and many other beverages are now commonly stored in aluminum cans, which are lighter and do not rust. Aluminum cans are made by impact extrusion; the body of the can is punched out in one piece from a single aluminum sheet by a stamping die. This seamless piece, which has a rounded bottom, is then capped with a second piece as its lid. The tabs used in pop- top cans are also made of aluminum. Bimetal cans are made of aluminum bodies and steel lids.

Canneries are usually located close to the growing areas of the product to be packed, since it is desirable to can foods as quickly as possible after harvesting. The canning process itself consists of several stages: cleaning and further preparing the raw food material; blanching it; filling the containers, usually under a vacuum; closing and sealing the containers; sterilizing the canned products; and labeling and warehousing the finished goods. Cleaning usually involves passing the raw food through tanks of water or under high- pressure water sprays, after which vegetable or other products are cut, peeled, cored, sliced, graded, soaked, pureed, and so on. Almost all vegetables and some fruits require blanching by immersion in hot water or steam; this process softens the vegetable tissues and makes them pliable enough to be packed tightly, while also serving to inactivate enzymes that can cause undesirable changes in the food before canning. Blanching also serves as an additional or final cleansing operation.

Definition: Bonsai is an art of growing dwarfed, ornamentally shaped trees or shrubs in shallow containers or trays. It’s an art that expresses in miniature form of a natural tree. The word Bonsai is a Japanese term which literally means “planted in a container”.

This art form is derived from an ancient Chinese horticultural practice, part of which was then redeveloped under the influence of Japanese Zen Buddhism. Thus, origin of bonsai culture is China. Though it was popularized by Japanese. The ultimate goal of growing a bonsai is to create a miniaturized but realistic representation of nature in the form of a tree. In Japan bonsai is not only a hobby but also act as status symbol.

8.1 Introduction

In pre-historic times, people lived as hunters and gatherers. Then, gradually they began to produce the crops they ate on piece of land, and farming was born. Wild plants have certain traits that keep them protected and productive without human intervention. However, most of them are not desired for food or other use by humans. By spontaneous mutagenesis and hybridization, occasionally variant plants were found that lacked some of the undesired traits, such as bitter taste, thorns, or had particularly attractive features, such as larger fruits and more regular tuber shape. Consequently, as time passes such variation was picked up by humans by selection of such variants, keeping and advancing them. Thus, plant domestication is the process of bringing wild species under human management. In other words, plant domestication is the process by which genetic changes (shifts) in wild plants are brought about through a selection process imposed by humans. It is a method of plant breeding in the sense that, when successful, it provides domestic types that are superior to ones previously available.

Pre-historic man domesticated virtually all of our present-day crops. But, domestication of wild species continues even today and is likely to continue for a long time in the future. For example, in many countries there is an increasing emphasis on bringing forest trees producing timber, etc. under human management. A similar trend is seen for medicinal plants and plants producing specific compounds of interest, e.g., hydrocarbons, oils, etc. Kala jeera (Bunium persicum), a perennial spice, was domesticated during 1990s in Himachal Pradesh; it is being cultivated as an orchard crop. One important aspect of domestication at present is the use of particular genes from wild relatives in the improvement of cultivated species. When a plant breeder transfers one or a few desirable genes from a wild relative to a cultivated type, he is, in a sense, domesticating the wild species in part.

Emerging Paradigm of Extension Plus:

This is now widely recognized that Animal Husbandry extension needs to reform in ways that allow it to fulfill a diverse set of objectives in worldwide. This ranges from better linking of farmers to input and output markets, to reducing the vulnerability and enhancing voice of the rural poor, development of micro-enterprises, poverty reduction and environmental conservation and strengthening and support of farmer organizations’. So while technology transfer is important, what is also required is the strengthening of locally relevant innovation processes and knowledge systems. Extension is being forced to embrace a broadened mandate that while in reality has always existed, has rarely been addressed. The limitations of a single model of extension for all kinds of situations are now well recognized and there is an increasing realization that new extension approaches need to emerge locally, based on experimentation, learning and adaptation to prevailing circumstances. The need for this new and expanded view of extension is clearly emerging in the case of Indian agriculture, which is characterized by declining land and water availability, degradation of natural resources, an unfavorable price regime, low value addition, particularly in rural areas and increasing competition from import of agricultural commodities. Farmers thus find themselves in an ever more complex production and market environment, with an expanding need for information and services.

Project Implementation

Project Implementation is the process of putting a project plan into action. It takes place after the planning phase; planning phase includes key objectives, timeline and budget of the project. Execution includes organizing resources and assessing performance to guarantee the project stays within its anticipated scope and budget. It also involves handling any unforeseen issues in a way that keeps a project running smoothly.

Steps for Project Implementation

1. Assess the Project Plan: Before implementing the project, it is essential to create a plan that satisfies the expectations of the management, customers, and other stakeholders. The project manager must assess the project plan and guarantee that all team members comprehend the project and its requirements. The project manager must define the roles and the time required to complete each role. This step sets the standard for cooperation at work.

2. Execute the Plan: At this stage, the real work on the project begins. The project manager regularly discusses progress with his team. It measures progress along a timeline and tracks resource usage.

3. Make required Changes: Sometimes, during the implementation of the project, the manager has to make changes at the request of the customers or in other situations. Make these changes as needed, based on the design plan for solutions. Continue to interact with the team and ask questions to determine areas where they need more support.

4. Examine Project Data: It is crucial to gather and evaluate data throughout the execution phase of the project to assess the advancement of the project in comparison to its initial plan. Now, the day manager can use many project management software and information technology to collect and analyze real time data.

5. Assess the Feedback: After the conclusion of the project, it is crucial to gather feedback regarding the project outcomes from the clients, the project team and other stakeholders. This assists in determining the number of activities in the project that were executed as intended and aspects that require enhancement moving forward.

Nanotechnology is manipulation of matter on an atomic, molecular, and supramolecular scale. The earliest, widespread description of nanotechnology referred to the particular technological goal of precisely manipulating atoms and molecules for fabrication of macroscale products, also now referred to as molecular nanotechnology.
Nanotechnology as the manipulation of matter with at least one dimension sized from 1 to 100 nanometers. This definition reflects the fact that quantum mechanical effects are important at this quantum- realm scale, and so the definition shifted from a particular technological goal to a research category inclusive of all types of research and technologies that deal with the special properties of matter which occur below the given size threshold. It is therefore common to see the plural form "nanotechnologies" as well as "nanoscale technologies" to refer to the broad range of research and applications whose common trait is size.
Introduction
A nanometer (nm) is one thousand millionth of a meter. A single human hair is about 80,000 nm wide; a red blood cell is approximately 7,000 nm wide, a DNA molecule 2 to 2.5 nm, and a water molecule almost 0.3 nm. The term ”nanotechnology” was created by Norio Taniguchi of Tokyo University in 1974 to describe the precision manufacture of materials with nanometer tolerances, but its origins date back to Richard Feynman’s 1959 talk ”There’s Plenty of Room at the Bottom” in which he proposed the direct manipulation of individual atoms as a more powerful form of synthetic chemistry. Eric Drexler of MIT expanded Taniguchi’s definition and popularised nanotechnology in his 1986 book “Engines of Creation: The Coming Era of Nanotechnology”. On a nanoscale, i.e. from around 100 nm down to the size of atoms (approximately 0.2 nm) the properties of materials can be very different from those on a

The concept of value, expressible in the metric units by which the character is  measured. The value observed when the character is measured on an individual is the phenotypic value of that individual. All observations of means, variance, or covariances, must clearly be based on measurements of phenotypic values. In order to analyse the genetic properties of the population we have to divide the phenotypic value into two componants. 
The first division of phenotypic value is into components attributable to the influence of genotypic and environment. The genotype is the particular assemblage of genes possessed by the individual, and the environment is all the non-genetic circumstances under the term ‘environment’ means that the genotype and the environment are by definition the only determinants of phenotypic value. The two components of value associated with genotypic value and the environmental deviation. 

Nucleic acids were first discovered in 1868 by Friedrich Meischer. Nucleic acids are high molecular weight polymers that are present in our cells. They store and transfer genetic material from generation to generation. Knowledge of how genes are expressed and how they can be manipulated is becoming increasingly important for understanding of nearly every aspect of biochemistry. These macromolecules p ass on information for cellular growth and reproduction. All the genetic information in the cells is called the genome. Every time a cell divides, the information is copied and passed on to the new cells.

ABSTRACT

Veterinarians, appointed in field, rarely get the opportunity to update their knowledge and skills, through trainings or courses, due to their working conditions. More over, they feel isolated and neglected from colleges due to poor interactions. Looking to this need, the courses on Post Mortem Techniques and Diagnosis of Parasitic Diseases in Livestock were developed, based on the Need Assessment survey. The courses were developed on interactive CD ROM with audio, video clips and photographs along with some reading material. The courses were of one credit each and had minimum one face-to-face session. The response by the veterinarians was tremendous and around 210 veterinarians offered for the courses by paying fees. Participants and stakeholders expressed the need for additional courses and accordingly two more courses on surgical techniques in large and small animals were launched which also received good response.

Synonyms : Johne’s disease, Chronic  specific enteritis of cattle, Chronic bacillary dysentery
 
Paratuberculosis (Johne’s disease), an infectious disease caused by Mycobacterium avium subspecies paratuberculosis (MAP), has been recognized as a major disease of ruminants for over a century. It is primarily a disease of domestic and wild ruminants and causes heavy economic losses  in cattle, sheep and goat industry. It is spreading insidiously among animal population worldwide.  Recently it has been shown  that  the disease is not restricted to ruminants only and the host range is expanding to cause disease in other species including Crohn’s disease in humans. In India, the  disease has been occurring  since early 1930s in cattle, sheep and goats in almost every state. The disease in ruminants is clinically characterized by chronic intermittent profuse diarrhea, weight loss, emaciation and finally death.

Ber (Zizyphus mauritiana Lamk.) is one of the ancient and common fruits, indigenous to India. It is growing in wild, semi wild and cultivated forms all over the country in sub-tropical and tropical areas. Area under ber in J&K is 5,376 hectare with annual production of 10,779 metric tonnes.

Climate and Soil

Ber plant is hardy and can grow successfully even under poor soil and unfavourable climatic conditions, where most other fruit trees fail to grow. It prefers a hot and dry climate for its successful cultivation, but needs adequate water during its first fruiting season. It can be grown up to an elevation of 1000 meters above sea level. Excessive atmospheric humidity seems to be a limiting factor in its successful fruiting.

The ber tree develops a deep tap root system with in a short period of its growth and as such adopts itself to wide variety of soils. However, deep sandyloam soils appear to be better for its plantations. It is well known in its ability to thrive under adverse conditions of salinity, drought and water logging.

Aim: Study of 3 point and 4-point starter.

Theory

A 3-point starter in simple words is a device that helps in the starting and running of a shunt field or compound excited dc motor. Now the question is why these types of dc motors requires the assistance of the starter in the f irst case. The only explanation to that is given by the presence of back emf Eb , which plays a critical role in governing the operation of the motor. The back emf, develops as the motor armature starts to rotate in presence of the magnetic field, by generating action and counters the supply voltage. This also essentially means that the back emf at the starting is zero, and develops gradually as the motor gathers speed.