eChapters

4.1.1 Vertical row planting pattern

1. Square system: In this system, trees are planted on each comer of a square whatever may be the planting distance. This is the most commonly followed system and is very easy to layout. The central place between four trees may be advantageously used to raise short lived filler trees. This system permits inter cropping and cultivation in two directions.

2. Rectangular system: In this system, trees are planted on each corner of a rectangle. As the distance between any two rows is more than the distance between any two trees in a row, there is no equal distribution of space per tree. The wider alley spaces available between rows of trees permit easy intercultural operations and even the use of mechanical operations.

4.1.2 Alternate row planting pattern

3. Hexagonal system

• In this method, the trees are planted in each comer of an equilateral triangle.

• This way six trees form a hexagon with the seventh tree in the centre.

• Therefore, this system is also called as 'septule' as a seventh tree is accommodated in the centre of hexagon.

• This system provides equal spacing but it is difficult to layout.

• The perpendicular distance between any two adjacent rows is equal to the product of 0.866 x the distance between any two trees.

• This system accommodates 15% more trees than the square system. The limitations of this system are that it is difficult to layout and the cultivation is not so easily done as in the square system.

9.1 INTRODUCTION

Establishment of an orchard incurs long term investment for which it needs a very critical planning. As it is a long-term investment, plants planted in the orchard should suit to the prevailing climatic condition of that area. The land remains occupied as long as 40 to 50 years. Any mistake committed during initial year is hard to rectify later on. Proper layout of the orchard ensures optimum utilisation of land and resources for successive economic production. It becomes easy for different inter-cultural operations, harvesting and transportation of the produces. Uniform distribution of plants in the selected land in various systems of planting is done after proper layout.

9.2 LAYOUT

The proper layout of orchard aims at accommodating maximum number of trees per unit land area, maintaining adequate space for proper development of the trees and convenient orchard management practices.

Pineapples are commonly propagated through vegetative means, as the crop sets very few or no seeds and seeds possess slow germination process and low survival rate of seedlings under natural conditions. Vegetative parts such as stem suckers, peduncle slips, and fruit crowns are commonly utilized for vegetative multiplication of pineapple.

Selection of planting materials: Slips or hapa suckers are commonly preferred for commercial multiplication because they may produce fruit within 14-16 months after planting. Crowns are not commonly used as they may take up to 24 months after planting to harvest. Ground suckers (ratoon) and side suckers (side shoots) produce fruit 12-14 months and 18-20 months after flowering, respectively.(Pineapple Technical Group, 1999).

The fresh suckers should not be used for planting. Pineapple suckers should be stored for a few months to allow them to dry before planting, as they may begin to decay if planted in moist soil. Suckers are graded according to vigour and size, such as small, medium, and large. Planting the same graded suckers in the same plot helps to avoid uneven growth of the plant, uneven flowering times, and harvesting times. Additionally, using uniform planting material makes cultural practices easier, increases labour efficiency and other inputs, ultimately reducing the cost of cultivation.

Chadha et al. (1974) observed the superiority of slips and suckers as planting materials compared to crowns. In both slips and suckers, larger planting materials resulted in more vigorous plants. Medium-sized slips or suckers led to more flowering, while larger grade material resulted in a more staggered f lowering period. Smaller slips or suckers yielded fruit earlier. Slips produced better quality fruits, and the yields were comparable to the highest yield obtained with the largest suckers.

Planting System

Main objective of layout is maximum number of plant accommodated in per unit area without affecting the efficiency of production. If more than one fruit is included in the orchard plan, each kind should be grouped into individual block. Similarly fruit ripened in particular season should be grouped to facilitate convenience in watch and ward, harvest and post harvest handling. Some kind of fruit trees need pollinators/pollinisers for improving the fruit set.

Layout plan- Main objective of layout is maximum number of plant accommodated in per unit area without affecting the efficiency of production. If more than one fruit is included in the orchard plan, each kind should be grouped into individual block. Similarly fruit ripened in particular season should be grouped to facilitate convenience in watch and ward, harvest and post harvest handling. Some kind of fruit trees need pollinators/pollinisers for improving the fruit set.

The system of planting to be adopted is selected after considering the slope of land, planting density, purpose of utilizing the orchard space, convenience, etc. Traditionally, six systems of planting are recommended for fruit trees. However, with the popularity of high density planting, there are some advances inplanting, especially in fruit crops.

1. Square system: This system is considered to be the simplest of all planting systems and adopted widely. In this system, the plot is divided into number of squares as per plant spacing and trees are planted at the four corners of each square, in straight rows running at right angle. Under this system, intercultural operations, spraying, harvesting, etc. can be done conveniently and easily. Cultivation and irrigation can be done in two directions. In this system, plant to plant and row to row distance is the same. e.g. 5x5m, 4x4m, 10x10m, etc.

   While laying out the plot, a base line is first drawn parallel to the road, fence or adjacent orchard at a distance equal to half the spacing to be maintained between the trees. Wooden pegs are fixed on this line at the desired distance. At both the ends of the baseline, right angles are drawn by following the simple carpenter’s 3,4,5 meter system. After the formation of three lines, it is easy to fix all the other pages to mark the tree locations at the required spacing by using ropes connecting the pages of the lines in opposite directions.

   Area occupied per plant = row to row distance X plant to plant distance

Trees are perennial in nature and are valuable elements in a landscape. Trees provide shade, privacy and beauty but a tree in a wrong place may create problem in years to come. To avoid this, care should be taken while selecting trees for landscape. The ultimate size and shape of the mature tree, how much annual maintenance it requires, location and purpose are major considerations while selecting a tree. Matured tree height and tree diameter should fit it into the space when tree is planted. Shape of canopy, colour of flower and season of flowering are also to be considered.

ABSTRACT

In vitro culture induced genetic variation constitutes an important source of variability for the improvement in ginger (Zingiber officinale Rosc.). Hence attempts were made to standardize indirect method of in vitro plantlet regeneration in ginger using various explants like sprouted bud, shoot tip, leaf and pseudo stem. Explants from two cultivars of ginger viz. Maran and Rio-de-janeiro were cultured in Murashige and Skoog (MS) medium supplemented with various levels of 2,4-D and in combination with different levels of BA. Cultures were incubated under two different culture conditions viz. light and dark. Callusing was observed in all the explants except mature leaf in MS medium supplemented with 2,4- D alone (1 - 2 mg l^-1) and in combination with BAP (0.5 - 3.0 mg l^-1). Shoot morphogenesis was achieved from one month old calli in MS medium supplemented with BAP (3.0 mg l^-1). Regenerated shoots were subcultured to medium of same composition for further shoot proliferation and rooting. Plantlets produced were hardened and planted out. From the present investigation, highly efficient protocol for indirect organogenesis in ginger could be developed and the response of two cultivars at various stages of morphogenesis could be studied in detail.

In this chapter, a comprehensive list of all plants and trees mentioned in epic Ramayana has been furnished with salient details in order to establish their botanical identity and references of Sholka where it had been mentioned. Some of the plants and trees had been mentioned in multiple sholokas but the plant has been taken into account as a single reference to avoid repetition and to get correct count of the trees and plants in whole of the Epic (Amirthalingam, 2013, Arun Kumar, 2019; Balapure et al., 1987; Bast, 2022; Ghimire et.al, 2021; Mao and Dash, 2010; Prasad and Mishra, 1976).

The plant species mentioned in Ramayana were of different types having various usages. Considering their morphological characteristics, usages and other importance, they have been categorized broadly into the following heads.

1. Economically important plants (Timber value, product yielding etc. having commercial importance).

2. Edible (major and minor fruits etc.).

3. Culturally important plants (Plants used for plantation for shade, greening etc.).

4. Non-Edible Plants (Ornamental importance and other usages)

5. Medicinal Plants (having therapeutic uses).

6. Sacred Plants (having religious importance).

7. Others (having multipurpose uses).

Dyes are one of the most important by products of the plants, as they are related with cultural practices, rituals, arts and crafts, fabrics and to satisfy personal embodiment. However, dye yielding plants have not received significant attention (Grover and Patni, 2011). Dye is a substance that has affinity to the substrate to which it is being applied such as textile fibers, foodstuffs and powder. They are organic coloured substances which absorb light in the visible part of the spectrum and have the property of colouring the substrate they are applied to.
 
Colourants which are obtained from plants and natural sources are known as natural dyes. Natural dyes have been traditionally used in most of the countries. These dyes were obtained from roots, leaves and bark (Akhtar et al., 2012). Natural dyes find use in the colouring of textiles, drugs, cosmetics, etc. Owing to their non-toxic effects, they are also used for colouring various food products. In India, there are more than 450 plants that can yield dyes (Siva, 2007).

Plants are most important of all elements of the garden that influence design. Therefore, selection of variety of plants is required to exhibit different forms of growth, leaf texture, flowers and flower colour. Trees, shrubs, climbers, annuals, roses, bulbous and rhizomatous plants usually find place in the gardens along with other secondary groups. Every type of garden has enough scope to accommodate various groups of plants as per design.

Plants infuse life in the gradens and make the place living. Every feature of the garden has a separate requirement of plants. The right choice, therefore, complements the design and helps to create desired effects. Every plant species selected for planting should have sufficient reasons for its inclusion. May be, it has been selected considering particular flower colour, fragrance, curious structure, colour of the leaves, attractive fruits etc. Over and above, selection should be considering requirement of individual feature and its suitability. None other than plants influence the general apperance of the gardens besides giving them three dimensional look, enabling your plan into reality.

There are several approaches for selecting plants for the gardens. Preference should be given to the plants suitable for growing in local agro-climatic conditions for better performance. However, inclusion of new and novel type for creating special effects is always desirable. Selecting perennials and seasonals are, therefore, very much justfied in order to create desirable effects round the year. While using trees, emphasis should be given for selecting both foliage and flowering type, blooming in different season. Similarly, shrubs, climbers and other plant groups are added attraction of the gardens by their diversity of growth, foliage and flowers.

Selection of plants for the gardens needs careful consideration of vegetative, floral attributes besides growth habit and flowering for best use. Keeping this in view, basic information on various plant groups is provided under different categories.

Plants have played an important role in many mythologies and religions of the world and have been known for deep and sacred meanings throughout the ages. It is the symbolic representation of the old cultural traditions in the form of a tree across the world. Christmas tree in the Christianity and Bodhi tree in Buddhism are the example of tree featured in mythology. In most of the folklore, folktales and folk religion trees are often said to be homes of tree sprits. If history is traced, we will found that Druidism and Germanic paganism appear to have involved in religious conservational practices of sacred groves. Druidism is a nature based religion that was taught by Druids about 2000 years ago. The term druid itself possibly derives from the religeous word for oak. Therefore, the Druidism reconnects us with nature, our ancesters and ourselves by working with plants or trees.

Trees are honored in Indian culture for their different beneficial characters like medicinal properties, food, fodder, maintaining hydrological cycle, moderate the climate etc. There are some trees that have attained more than a special benevolence in Hindu mythology. In Indian mythology number of plants have been given sacred value and worshipped by different cultures. Some important plants of sacred value have been discussed here.

Introduction

India is blessed with varied agro-climatic conditions. This enables India to grow almost all types of horticultural crops namely fruits, vegetables, potato, tropical tuber crops and mushroom; ornamental crops; medicinal and aromatic plants, spices and plantation crops like coconut, cashew, cocoa, tea, coffee and rubber, in one region or the other throughout the year. India has now a prominent place in world horticulture scenario. Starting from low ebb during first five year, horticulture sector got a boost in 8th plan onwards as a means of diversification to agriculture. Horticulture today, is not merely a means of diversification as envisaged during 80s, but forms an integral part of food, nutrition, economic and employment security. As a result of proper policy initiatives, India is the second largest producer of the fruits and vegetables in the world contributing about 10 per cent to world fruits and 13.8 per cent to vegetable production. Adoption of horticulture crops in production, both by small and marginal farmers, has brought nutritional security and livelihood security in many regions of the country, e.g. Maharashtra, Karnataka, Andhra Pradesh and Kerala and improved overall socioeconomic conditions of the people e.g. Jharkhand and West Bengal.

Abstract

Jasrota Wildlife Sanctuary (JWS) in Jammu and Kashmir (J&K) Union Territory is floristically less explored. Between 2018 and 2019, field surveys and exploration tours were undertaken to obtain information from local people residing around JWS through open interviews, semi-structured questionnaires and group discussion. Total 113 informants were contacted and data collected by means of ‘snowball method’. A total of 138 species of 60 medicinal plant families were documented subjected to preliminary investigation, which includes 47.10% herbs, 28.26% trees, 19.57% shrubs, 4.35% lianas, and 0.72% parasites. Most dominant families were Fabaceae (11 gen. and 12 spp.), Lamiaceae (6 gen. and 8 spp.), Asteraceae (8 gen. and 8 spp.), Moraceae (2 gen. and 6 spp.), Caesalpinaceae (4 gen. and 6 spp.), Rosaceae (5 gen. and 5 spp.), Euphorbiaceae (4 gen. and 5 spp.), Solanaceae (4 gen. and 4 spp.) and Malvaceae (4 gen. and 4 spp.). Some of the common high valued medicinal plants were Ajuga integrifolia, Aloe barbadensis, Asparagus adscendens, Boerhavia diffusa, Cassia fistula, Lantana camara, Murraya koenigii, Ocimum tenuiflorum, Tinospora cordifolia, Zingiber officinale and several other plants. Traditionally lesser used plants were Abrus precatorius, Acacia catechu, Commelinabenghalensis Cyperus rotundus, Silene vulgaris, Robinia pseudoacacia, Urtica dioica and Ziziphus mauritiana. These medicinal plants are used in treatment of obesity, anti-helminthic, liver infection, diabetes, intestinal infections, rheumatism, tumours, stomachache, insomnia, nerve troubles, skin infection, aphrodisiac, memory related disorders, dermatological problems and asthma. Species with high frequency index should be analyzed for pharmacological research and for discovering of new medicines. It has been observed that lots of medicinal plants grows in this protected area and this sanctuary need proper conservation and management planning.

1. Atropine Toxicity

? Toxicity of atropine depending upon the route of administration and the sp. of animal.

? Herbivores are more resis-tant than carnivores. Dogs, cats and birds are sensitive to its action. Rabbits are quite resistant to belladona leaves since an atropinase enzyme present in liver rapidly hydrolyses and inactivates atropine.

? Horse cattle and goats are relatively resistant to bellladona when administered orally, however poisoning on ingestion occurs more often in swine. Resistance in ruminants due to destructive maceration of atropine in rumen.

? All parts of plants are toxic as these contain atropine like alkaloids. Toxic dose of hyoscamine is 2.7 mg/kg for pigs.

The response of plants to air pollution can be understood by analyzing the physiological and biochemical parameters of plants.

Physiological Parameters

The epidermal cells are the first to interact with the air pollutants and also lack chloroplast. Epidermal cells hence cannot remove excess sulphur through the production and release of H2S. Damage to plants by air pollutants depends upon the amount of pollutants entering the cells and their reactivity with cellular constituents. Plants regulate the entry of gaseous molecules through stomatal movement thereby affecting the photosynthesis and transpiration. Response of plants to gaseous pollutants varies from species to species. This is due to differences in the stomatal conductance, aperture size and permeability of plasma membrane (Yunus et al., 1996).

The use of natural dyes lost ground together with the old traditional dye methods towards the end of 19th century soon after the synthetic dyes came to the market (Gilbert and Cooke 2001). Only artisans, craftsmen, and green–minded companies continued dyeing with natural dyes (Hartl 1997). The first recorded synthetic dye is picric acid produced in 1770’s from the interaction of indigo and nitric acid. The synthetic dye industry is considered to have started when Perkins synthesised mauveine (mauve) in 1856 in the UK (Hancock 1997). With the passage of time, it was observed that synthetic dyes used by the textile industry are a source of environmental pollution (Seker et al. 2007) and they produce allergic, carcinogenic and detrimental effects on the health of humans (Singh and Singh 2002, Mahanta and Tiwari 2005). The synthetic dyes were preferred by the industry because of their simpilicity in the use and all colors could be produced easily, but the problem was the waste deposition which is a major cause of environmental pollution. The solvents used during dying reduce the problem to some extent but the waste water purification needs extra effort and money (Shreve and Brink 1985). As against this, the natural dyes are not only harmless to the humans but also cause far less environmental pollution, and have distinctive washing and sunlight fade–resistant characteristics (Mert et al. 1992, Angelini et al. 1997, Kim and Park 2006). For this purpose, the textile industries have started rethinking about the natural dyes and are trying to find sustainable as well as non–toxic alternatives to synthetic dyes for a growing textile market.

Abstract

Herbal healthcare forms the most favored system for curing various ailments of the people residing in remote areas of Himalayan region. Gujjar and Bakerwal tribes inhabit the hilly areas of Pir Panjal region of J&K along with their livestock and rely on the surrounding bio-wealth for their healthcare needs. But, proper documentation of traditional knowledge about the medicinal plants has been poorly attempted in this part of J&K. In order to develop a data base of plants being used by Gujjar and Bakerwal tribes of district Poonch, present attempt has been made. The present compilation recorded one hundred forty five plant species belonging to 133 genera and 76 families which are used by the tribal people to cure various ailments like rheumatism, diarrhea, dysentery, skin and gastric problems, wound healing etc. These medicinal plants comprise of 25 trees, 27 shrubs, 82 herbs and 11 climbers. Of the total, 44 species are native to Himalayan region and 101 are non native.

Keywords: Indigenous knowledge, Medicinal plants, Healthcare, Gujjar, Bakerwal

Principle

The plaque assay was developed in order to enumerate and quantify the infectivity of bacteriophages. This technique has been subsequently adapted for application in animal virology and has proven to be a dependable method for quantifying the concentration of various viruses that have been adapted for growth in cell cultures. This assay is designed to quantify the capacity of a solitary infectious virus to create a visible area of cell death on a layer of cultured cells. A plaque forms during the viral infection cycle, in which the host cell dies after viral replication. Some viruses cause cell lysis during replication, while others cause minimal damage to the cells. The plaque assay is a technique used to measure the quantity of viruses that cause the destruction of their host cells, resulting in cytopathic effects (CPE). During a plaque assay, the host cells and virus are briefly co-cultured to enhance the virus's attachment and entry into the host cell. Subsequently, the concoction is introduced into a partially solidified agar medium. The thick agar is poured onto a layer of "bottom agar" which supplies ample nutrients for the host cell. After one round of virus replication, an infected cell will undergo lysis, leading to the release of multiple new viruses. Within the gelatinous substance, these newly released viruses can only infect neighbouring cells. After a subsequent round of replication, these neighbouring cells will undergo lysis. The cells that manage to avoid infection will continue to proliferate. After a period of 24 to 48 hours, plates that were not contaminated with a virus will display a consistent layer of cells. The plates infected with a multitude of viruses exhibit plaques. Quantifying viral titer is essential for assessing viral infectivity. The determination can be made either by conducting a plaque assay or by calculating the infectious dose.

Plasma Activated Water (PAW) is an emerging technology that combines the reactive properties of plasma with water to create an effective medium for food preservation and decontamination. This chapter explains the principles of PAW generation and examines different generation systems, including atmospheric pressure plasma jets, corona discharge and dielectric barrier discharge. It explores applications of PAW in reducing post-harvest losses, extending the shelf life of highly perishable foods, supporting edible-coating formation, controlling undesirable enzyme activity and improving food safety. The chapter emphasizes the potential of PAW as a sustainable processing approach while discussing treatment conditions, food-matrix interactions, technological limitations and opportunities for future development in food preservation.