eChapters

Key words : Glaciers, Glacial Lakes, Glacial Lake Outburst Floods (GLOF), Himachal Pradesh, Glacial Inventory, Glacier Recession.

Introduction

Glaciers are large masses of snow, re-crystallized ice and rock debris that accumulate in great quantities and begin to flow outwards and downwards under the pressure of their own weight. Glaciers form when yearly snowfall in a region far exceeds the amount of snow and ice that melts in a given summer. In this way, massive quantities of glacial material accumulate in relatively small periods of geologic time. The glaciers exist in environments of high and low precipitation and in many temperature regimes; they are found on all the continents except Australia and they span the globe from high altitudes in equatorial regions to the polar ice caps. Presently, 10% of the Earth’s land area (5.8 million square miles) is covered with glaciers storing about 75% of the world’s freshwater. However, during the last Ice Age, glaciers covered 32% of the total land area of the planet.

4.1 Introduction and Measuring

A measure of central tendency exhibits only one of the important characteristics of distribution, namely they typical representative figure to the whole set of its values. This measure alone will not adequately describe a set of observation unless all the observations are alike. Moreover one cannot understand completely about the data set with a measure of central tendency.  Because in real practical situation there may exits a number of sets of observations (or different distributions) whose measures of central tendency are same but they may differ individually from each other in a number of ways.  In particular two sets of values have the same mean but whilst one set of data is grouped close to the mean the other one is more spread out.  The following examples will illustrate this view point clearly.

“Educational Technology is the application of scientific knowledge about learning and the conditions of learning to improve the effectiveness and efficiency of teaching and training. In the absence of scientifically established principles, educational technology implements techniques of empirical testing to improve learning situation”.

National Centre for Programmed Learning, UK
“Educational Technology is a complex, integrated process involving people. procedures, ideas, devices and organization for analyzing problems and devising. implementing, evaluating, and managing solutions to those problems, involved in all aspects of learning”.

Association for Educational Communications and technology (AECT), 1977
The most recent definition of the field (which uses the term, instructional technology) has been published by the Association for Educational Communications and Technology (AECT). It defines Instructional Technology as “the theory and practice of design,

Key words : Integrated Watershed Management (IWM), GIS, DTM, Watershed Delination, Water Quality Modeling, RS, DSS, Ground Water Information System (GWIS).

Introduction

The availability of land and water resources has a major effect on the economic and ecological aspects of life everywhere around the world. As a result, the need to develop better tools for efficient land and water resources management has become very vital. For quicker, reliable and precise results, it is necessary to use the geospatial tools and techniques such as Global Positioning Systems (GPS), Geographic Information Systems (GIS) and Remote Sensing (RS) image interpretation and analysis techniques to manage the natural resources. The application of these tools and techniques not only facilitates timely and repetitive analysis of all the topological features, but also assists in development of Decision Support Systems (DSS) to generate alternative scenarios for optimal use of the natural resources in the long term. The optimal use of these resources through integrated management of land water and vegetation leads to enhanced production and productivity of food, fodder, fiber, fuel, fish, flower and forest resources. Moreover, the holistic management of the resources to produce these outputs is plausible and manageable within the watershed systems, which are hydro geological units from which the runoff resulting from precipitation flows past through a single outlet to downstream locations. The systematic management of land, water, vegetation and livestock resources within the watershed systems is termed as Integrated Watershed Management (IWM). Broadly, IWM can be defined as a multidisciplinary, holistic way of protecting and managing a watershed’s natural resources to enhance biomass production in an eco-friendly manner. The watershed is viewed as a hydro-geological complex and dynamic ecosystem in which natural and anthropogenic processes occur and interact resulting in generation of runoff at the watershed outlet.

A wide variety of fungal and bacterial pathogens cause postharvest disease in fruits and vegetables. Some of these infect produce before harvest and then remain quiescent until conditions are more favourable for disease development after harvest. Other pathogens infect produce during and after harvest through surface injuries. In the development of strategies for postharvest disease control, it is imperative to take a step back and consider the production and postharvest handling systems in their entirety. Traditionally fungicides have played a central role in postharvest disease control. However, trends towards reduced chemical usage in horticulture are forcing the development of new strategies. Controlling or reducing disease relies on integrated crop and postharvest management, with attention to fungicide application, crop hygiene and nutrition, and the management of ripening, to optimise advantages conferred by the plant’s natural resistance factors that prevent and delay disease development. Agricultural production and food distribution systems have evolved over many years to a complex system which allows for nearly year-round supply of most fresh commodities through longterm storage and long distance shipments to consumers. The expectation of year round supplies has resulted in increased challenges for postharvest handling systems. The availability of fungicides for disease management likely played a major role in the evolution of our current system of food distribution (Mitcham, 1999). With the recent loss of registration of many postharvestfungicides and more expected under the Food Quality Protection Act (FQPA), as well as consumer pressure to reduce the amount of chemicals used on food, the challenge to maintain our current system of food distribution increases.

Peas and beans belonging to the family Fabaceae (Syn. Leguminosae) are delicious and preferred vegetables grown throughout the world. These include cool season vegetables like pea, French bean, lima bean, broad bean and tropical vegetables like cowpea, hyacinth bean, winged bean, jack bean, sword bean etc. These are integral components of sustainable agriculture due to their ability to fix atmospheric nitrogen and to improve soil properties. Legume vegetables are rich in protein and essential amino acids and have significant role in combating malnutrition among poor people and vegetarians.

Common features of legume vegetables are summarized below:

1. All legume vegetables are self-pollinated due to cleistogamous nature. Flowers are zygomorphic with papilionaceous corolla, mono-adelphous or di-adelphous stamens.
2. All are direct sown crops and do not respond to transplanting. Since seed size is comparatively bigger and they are closely planted, a high seed rate is required for most of crops.

Participatory technology development (PTD) is an approach to learning and innovation that is used in international development as part of projects and programmes relating to sustainable agriculture. The approach involves collaboration between researchers and farmers in the analysis of agricultural problems and testing of alternative farming practices.

Origins of participatory technology development

The origins of Participatory Technology Development can be found in a number of approaches, concepts and techniques that became popular in the 1970s and 1980s:

Farming systems research and extension, an approach that introduced social-ecomomic issues into organisations previously dominated by biological and chemical scientists. FSR/E also promoted the idea on ‘on-farm’ trials:

Appropriate technology, a concept that recognises the importance of matching the design of technology to the resources and culture of the user.

Introduction

India has been an agricultural economy since its inception. Several mechanisms are used in agribusiness, such as forward and backward linkages with secondary and tertiary sectors, such as manufacturing and service sectors. Opportunities in agriculture and related sectors can be identified at various stages of the farming process. Generally, agribusiness opportunities exist at the input stage, the farming stage, the value chain, the output processing and marketing stage, and the related services stage. As a result of globalisation and a more interconnected global market, the scope and potential of agribusiness opportunities is expanding. For entrepreneurs, there are numerous potential opportunities. Many different inputs are required in the agricultural process, such as seeds, fertilisers, pesticides, and innovative and localised farm technology. As a result, the aforementioned areas create agribusiness opportunities in developing and producing these inputs.

Introduction

A geographic information system or geographical information system (GIS) is a system designed to capture, store, manipulate, analyze, manage, and present all types of spatial or geographical data. The acronym GIS is sometimes used for geographic information science (GIScience) to refer to the academic discipline that studies geographic information systems and is a large domain within the broader academic discipline of geoinformatics. What goes beyond a GIS is a spatial data infrastructure, a concept that has no such restrictive boundaries. In a general sense, the term describes any information system that integrates stores, edits, analyzes, shares, and displays geographic information. GIS applications are tools that allow users to create interactive queries (user-created searches), analyze spatial information, edit data in maps, and present the results of all these operations. Geographic information science is the science underlying geographic concepts, applications, and systems.

GIS is a broad term that can refer to a number of different technologies, processes, and methods. It is attached to many operations and has many applications related to engineering, planning, management, transport/logistics, insurance, telecommunications, and business. For that reason, GIS and location intelligence applications can be the foundation for many location-enabled services that rely on analysis and visualization. GIS can relate unrelated information by using location as the key index variable. Locations or extents in the Earth space–time may be recorded as dates/times of occurrence, and x, y, and z coordinates representing, longitude, latitude, and elevation, respectively. All Earth-based spatial–temporal location and extent references should, ideally, be relatable to one another and ultimately to a “real” physical location or extent. This key characteristic of GIS has begun to open new avenues of scientific inquiry.

11.1 Introduction

Tropical Root and Tuber Crops serve as primary or secondary staple to meet the calorie needs of one fifth of world’s population. These crops have myriad and complex roles to play in the food security and reduction of hunger and elimination of poverty. The starch content, pharmaceutical and nutraceutical value endow these crops with an extra ordinary range of potential and uses. Root and tuber crops are also greater sources of industrial raw materials for biodiesel and starch derived materials.

Sustainable development has caught the imagination and action across the world. Sustainable agriculture is necessary to attain the goal of sustainable development. The word “sustain,” is derived from the Latin sustinere (sus-, from below and tenere, to hold), to keep in existence or maintain, implies long-term support or permanence. As it pertains to agriculture, sustainable describes “Farming systems that are capable of maintaining productivity and usefulness to society indefinitely. Such systems must be resource-conserving, socially supportive, commercially competitive, and environmentally sound”. “Sustainable agriculture is the successful management of resources for agriculture to satisfy changing human needs while maintaining or enhancing the quality of environment and conserving natural resources” (FAO). All definitions of sustainable agriculture lay great emphasis on maintaining an agriculture growth rate, which can meet the demand for food of all living things without draining the basic resources. Over time, the International Alliance for sustainable agriculture and an increasing number of researchers, farmers, policy-makers and organizations worldwide have developed a definition that unifies many diverse elements into a widely adopted, comprehensive, working definition

Introduction

The method of obtaining the data for each and every unit belonging to the population or universe, which is the aggregate of all units of a given type under consideration, is known as complete enumeration survey or complete census. Examples of units are family, a period of time such as an hour, day, fishing village, fishing household, fishing establishment, fishing boat, fish landing centres etc. The type of unit to be considered would depend on the purpose of the view. The population may be finite or infinite. It is obvious that for any statistical investigation complete enumeration of the population is rather impracticable. For example, if we want to have an idea of the total catch of fish (monthly) in India, we will have to enumerate all the fishers who catch fish in the country, which is rather a very difficult task. If the population is infinite, complete enumeration is not possible. In addition, if the units are destroyed in the course of inspection, 100% inspection though possible, is not at all desirable. However, even if the population is finite or the inspection is not destructive, complete enumeration is not taken because it is time-consuming, expensive, and as well as it needs a large amount of resources in terms of trained personnel.

12.1 Introduction
Having explored the dynamic realm of Numerical Weather Prediction, which focuses on forecasting the atmosphere’s state over days to weeks, we now shift our focus to a broader, longer-term perspective: Climate Data and Analysis. While weather describes the atmospheric conditions at a specific place and time, climate refers to the long-term average pattern of weather in a region, typically spanning decades or longer. Understanding and analyzing climate data is paramount for comprehending our planet’s past climate, identifying ongoing changes, and projecting future scenarios in a warming world. The study of climate is fundamentally data-driven. Unlike the instantaneous snapshots used in weather forecasting, climate analysis requires vast historical records, often extending back centuries or even millennia, to discern natural variability from human-induced changes. This data comes from a diverse array of sources, including instrumental records (thermometers, rain gauges, barometers), satellite observations, and proxy records (tree rings, ice cores, sediment layers) that provide indirect evidence of past climate conditions. The sheer volume and heterogeneous nature of this data present unique challenges and opportunities for analysis.
This chapter will delve into the essential aspects of climate data and the methodologies used to analyze it. We will begin by exploring the various types of climate data available, understanding their strengths, limitations, and how they are collected and curated. Crucially, we will examine how this data is used to characterize climate variability – the natural fluctuations within the climate system – and to detect climate trends, particularly those associated with global warming. We will introduce key climate indices that summarize large-scale atmospheric and oceanic patterns, providing simplified metrics for
understanding complex interactions.

INTRODUCTION

The propagation of plants has been one of the fundamental occupations of mankind since beginning of civilization. Plant propagation involves the application of specific biological principles and concepts in the multiplication of plants for useful purposes. The present day plant propagation industry is large and complex and involves not only the group that multiplies the plants for sale and distribution, but also a large group of industries that provide services, sell the product, is involved in regulation, provides consultation carries on research or is involved in teaching. The key person with in this complex, however, is the plant propagator who possesses the knowledge and skill either to perform or to supervise the essential propagation tasks for specific plants.

The relationship between man and plant resources of his surroundings is intimate. Of the 350 tribes inhabiting different parts of India, about 171 dwell in Himalayan region. The inhabitants of the mountain areas use native flora for food, fodder, fiber, fuel, timber and for health care of both human beings and their livestock. These plant resources, particularly medicinal and aromatic plants (MAPs), not only meet their health care needs but also support their livelihood. Recently the demand of MAPs has transformed from local and traditional needs to global needs. This has adversely affected availability and quality of raw material as also livelihood and health options of the local people. Most of the raw materials are gathered from the forests, and only a few plants are under cultivation. To avoid rampant exploitation of MAPs from nature, there is an urgent need to establish procedures for their cultivation and organized marketing. The present article deals with strategies and actions to protect livelihood options of the indigenous communities inhabiting mountain areas in western Himalaya as well as promote sustainable utilization of MAPs through scientific and technological interventions.

Introduction

India and China are two major Medicinal and Aromatic Plants (MAPs) producing countries, providing 40% of the global diversity and availability of rare species. The Ministry of Environment and Forests, Government of India has identified and documented over 9,000 species of medicinal plants that are significant for the pharmaceutical industry (AICRPE 1996). Of these, 2,000 to 2,300 species are used in traditional medicines while at least 150 species are used commercially on a large scale (EXIM Bank 1997).

2.1. Guidelines for Pest Risk Analysis

This standard describes the process of pest risk analysis for plant pests for the purpose of preparing phytosanitary regulations by National Plant Protection Organizations. Pest risk analysis (PRA) consists of three stages: initiating the process for analyzing risk, assessing pest risk, and managing pest risk.

Initiating the process involves identification of pests or pathways for which the PRA is needed. Pest risk assessment determines whether each pest identified as such, or associated with a pathway, is a quarantine pest, characterized in terms of likelihood of entry, establishment, spread and economic importance. Pest risk management involves developing, evaluating, comparing and selecting options for reducing the risk.

PRA is only meaningful in relation to a defined “PRA area” considered to be at risk. This is usually a country, but can also be an area within a country, or an area covering all or parts of several countries [e.g. the area covered by a Regional Plant Protection Organization (RPPO)].

STARCH : Starch is a complex carbohydrate that has been cursed by dieters in years past, but that now is praised by nutritionists as a particularly healthful source of energy. In food preparation at home starch is a very important as a thickening agent. However starch is but one of several polysaccharides that are used as thickners in the food industry.

STRUCTURE : Although starch is the name used by nutritionists this complex carbohydrate actually consists of two fractions amylose and amylopectin. The two fractions occur together in starch from most sources so the overall behaviour of starch is determined in large measure by the relative amounts of amylose and amylopectin. Each of the fraction has unique properties that contribute to the functionality of starch from various plant sources.

Q. 1 Psychrometric chart is a graphical representation of which properties
of air
(A) Chemical        (B) Aerodynamic
(C) Hygroscopic   (D) Thermodynamic

2.1. Introduction

Water plays a pivotal role in this earth system. The withdrawal of water for irrigation is about 70% of the global freshwater. Water use efficiency is less than 50% in many countries. It has been forecasted by the Food and Agricultural Organization (FAO, 2015) that global water requirements will be increased by 50% by the year 2050 to meet the demands of agricultural water use. This is so because food demand will be higher for the growing human population. We have entered into an earth system where everything living has evolved and developed (Cosgrove and Loucks, 2015). There has been a new geological scenario, some say Anthropocene (Crutzen, 2002; Williams et al., 2011). Consequently, freshwater will increasingly be a scarce and the costliest resource in the future, which needs to be managed properly.