eChapters

Necrosis

Local death of tissue /cells in living body is known as necrosis, It is characterized by the followings.

• Pyknosis is condensation of chromatin material, nuclei become dark, reduced in size and deeply stained.

• Karyorrhexis is fragmentation of nucleus.

• Karyolysis is dissolution of nucleus into small fragments, basophilic granules/fragments.

• Chromatolysis is lysis of chromatin material.

• Necrobiosis is physiological cell death after completion of its function e.g. RBC after 140 days.

Necrosis is further classified into coagulative, caseative, liquifactive and fat necrosis which are different from apoptosis (Figs. 5.1 to 5.3).

16.1. Introduction

Plantation crops are high value industrial crops grown in the tropics play a vital role in agricultural economy and export trade of developing countries. Plantation crops have great potential for utilization of waste land like rainfed dry land, hilly, arid and coastal areas to provide nutritional security, earn foreign exchange and to ensure livelihood security. The major plantation crops grown in India are tea (Camellia sinensis L), coffee (Coffea arabica L.), rubber (Hevea brasiliensis), coconut (Cocos nucifera), arecanut (Areca catechu L.), oilpalm (Elaeis guinensis), cashewnut (Anacardium occidentale L.), cocoa (Theobroma cacao L.) and cardamom (Elettaria cardamomum). India is the leading producer of most of these plantation crops. Among all fruit crops, the processing plays an important role in plantation crops as they are generally consumed only after processing. In addition to primary products which are exported largely, some by-products from these crops also have industrial as well as commercial uses. Coconut, arecanut, cashewnut, black pepper and cardamom are known as small holder plantations whereas, crops like rubber, tea and coffee are known as estate crops or conventional plantation crop. Coir, wood and shell from coconut, leaf sheath in arecanut, cashew nut shell liquid (CNSL) and feni from cashew are some of by-products with a great impact and demand in the market.

1. Introduction
With commercial uses ranging from the production of high-quality substances to the manufacture of pharmaceuticals, hydrogenation is an essential step in the formation of organic compounds (Cerveny et al., 1986). There are two main approaches to hydrogenation: direct hydrogenation, which employs pressurized hydrogen gas, and transfer hydrogenation (TH). A versatile and effective approach for producing a large variety of hydrogenated molecules, the TH method entails adding H2 to molecules via an origin other than H2 gas. This approach is increasingly preferred over direct hydrogenation and has recently attracted considerable interest in hydrogenation research. The benefits of the TH method include (i) the elimination of potentially dangerous pressurized hydrogen gas and the complexity of experimental setups, (ii) the accessibility, cost-effectiveness, and ease of use of hydrogen donors, (iii) the potential to recycle the main byproduct, and (iv) the availability and stability of the catalysts employed (Brieger et al., 1974).
1.1. The Historical Context, Core Principles, and Groundbreaking Research on TH (transfer hydrogenation)
With a history spanning more than a century, the TH reaction has a rich past. In order to enable hydrogen transfer between equivalent donor and acceptor units, Knoevenagel showed in 1903 that palladium black could efficiently aid in the disproportionation of dimethyl 1,4-dihydro terephthalate into dimethyl terephthalate and cis-hexahydroterephthalate. Three primary types of hydrogen transfer reactions were distinguished by Braude and Linstead: (i) the hydrogen movement within a single molecule; (ii) hydrogen disproportionation, which entails transfer among identical donor and acceptor units; and (iii) TH-dehydrogenation, which takes place between distinct donor and acceptor units. Of them, THdehydrogenation— often just called TH—is the most well-known and often applied sector. Meerwein-Ponndorf-Verley (MPV) reductions, early transition metal-catalyzed reactions, organocatalytic processes, enzyme-catalyzed reactions, heat techniques, and base-catalyzed reactions are among the types of TH reactions that are classified according to the type of catalyst used. The historical context, important research, and underlying ideas of each category will be covered in detail in this section.In 1925, Meerwein et al. independently reported the significant MPV reduction, which were the first TH process involving carbonyl groups. After earning his Ph.D. under Richard Anschütz in Bonn, where he was appointed a professor in 1914, Hans Meerwein (1879–1965) moved to Königsberg in 1922 and then to Marburg. His name is associated with a number of processes and reagents,

River restoration aims to rehabilitate degraded or altered river systems, enhancing ecological integrity, improving water quality, and increasing biodiversity. Despite its potential benefits, the process is complex and multifaceted, facing challenges across scientific, social, ecological, technical, and conceptual dimensions. Scientifically, there is limited understanding of how physical complexity influences key ecological processes, such as stream metabolism and contaminant degradation. Site-specific factors, altered sediment regimes, and invasive species further complicate recovery efforts, often hindering ecological restoration even when hydrological conditions are improved. Socially, restoration initiatives struggle due to a lack of public awareness and appreciation for the ecosystem services provided by healthy rivers. Economic paradigms frequently undervalue these benefits, leading to perceptions that restoration is non-essential. Additionally, many projects lack robust pre- and post-monitoring frameworks, which restricts the ability to evaluate success and adapt strategies. To achieve effective restoration, a shift in scientific approaches and enhanced public engagement are essential. River scientists must act as educators and advocates, clearly communicating the societal value of restored ecosystems. Addressing these interconnected challenges requires interdisciplinary collaboration, long-term monitoring, and a comprehensive understanding of ecological, social, and physical dynamics to yield meaningful and sustainable outcomes across various environments.

Information Sources for Biotechnology
    
Books
    
General Biotechnology Books
    
Animal Biotechnology Books
    
Review Articles
    
Journals
    
Animal Biotechnology Journals
    
Biotechnology Job Listings
    
The Scientist
    
Patents
    
Requirements for Setting up a Biotechnology Laboratory
    
Essential
    
Beneficial
    
Useful
    
PCR
    
Specifications of a Good PCR Macine
    
Gel Documentation System Electrophoresis
    
Laboratory Safety and Hazards

Body needs energy for the functioning of various processes for the nutrition and repair of damage tissue. This energy comes from the food nutrients. The food nutrients undergo a series of chemical reactions in the body to release the necessary energy.

The higher animals are dependent on plants and other animals for their nutrients. They can classified into two groups.

Carnivores : Those animals which obtain most of their food by eating other animals are carnivores in these species digestion is mainly enzymatic in nature and microbial digestion is minimal.

Herbivores : These animals obtain most of their food nutrients from herbage and other plant parts. In the herbivores, microbial digestion is of great significance and allows utilization of plant materials that are not broken down by the enzymes present in the digestive secretions.

Most of the domesticated animals except cat & dog fall in the category of herbivores. The domesticated herbivores can be divided into three groups:

1. Ruminants : Those possessing a rumen (cow, buffalo, sheep, goat, camel etc.) in which there is extensive microbial fermentation of the herbage diet in a specialized region of the digestive tract, prior to its digestion by the alimentary enzymes.
2. Psedoruminants eg members of the camelidae family eg camel, Ilama, alpaca, vicuna etc. In pseudoruminants animal third compartment of the compound stomach is absent.
3. Non-Ruminant : The second group is those with simple stomachs (Horse, Pig) in which fermentation takes place in the posterior part of the digestive tract.

Seed is the basic input in agriculture that acts as a catalyst for realising the full production potential of the high yielding/improved varieties. The role of quality seed in agriculture has been recognized since the ancient periods. It is a well established fact that among all the agricultural inputs, use of quality seed alone can enhance the crop production up to 15-20 per cent, depending upon the crop, and it can be further raised up to 45 per cent with efficient management of other inputs. If the seed sown is of inferior quality, the efforts of the plant breeders in developing and introducing improved varieties would be rendered futile. Modern agriculture lays great emphasis that each and every seed should germinate readily with full potential and produce vigorous seedlings to ensure high yields.

Abstract

Plants are an integral component of life in many ethnic communities. Plant-based medicaments have been used since time immemorial as curative and protective agents for prolonging life of humans and animals by combating a plethora of ailments. One such ailment affecting women of reproductive age-group is leucorrhea. The study aimed at systematically documenting the precious traditional knowledge regarding the plants traditionally used for curing leucorrhea in Jammu and Kashmir. A total of 55 infomants (39 females and 16 males) between the age group 25-94 years were selected and interviewed for extracting ethnomedicinal information and 29 plant species belonging to 28 genera and 23 families were observed to be of ethnomedicinal significance in the treatment of leucorrhea in Jammu and Kashmir. Fabaceae was observed to be the frequently encountered family. Bulk of the taxa were observed to grow in wild habitat and majority of them were herbs. Seeds were observed to be of highest therapeutic significance and ethnomedicinal formulations were prepared in the form of powder, decoction, paste, etc and all of these were administered orally. The present study may serve as a base line data for further research and will go a long way in the treatment of leucorrhea thereby promoting well being of women folk. Advanced investigations are required to validate the time-tested information associated with medicinal flora to determine the identity of phytochemicals linked with leucorrhea, so that compounds of pharmacological application having prospective relevance in the alleviation of human maladies may be discovered.

1. Introduction
Palladium (Pd), which has the atomic number 46, was discovered in 1803 by the English chemist William Hyde Wollaston. It is a well-known transition metal recognized for its versatile catalytic properties in chemical reactions, material sciences, and various industries. The palladium-catalyzed coupling reactions extend beyond the formation of biaryls. Many carbon–carbon, carbon–nitrogen, and carbon–oxygen bond-forming reactions in organic chemistry are facilitated by palladium salts and catalytic systems derived from palladium. Some notable organic reactions that involve palladium include the Mizoroki-Heck reaction, (Biffis et al., 2018, Koranne et al., 2023, Lee et al., 2021) Suzuki-Miyaura coupling, (Zhang et al., 2023) Negishi reaction, (Haas et al., 2016). Stille coupling, (Cordovilla et al., 2015). Sonogashira coupling, (Chinchilla & Najera, 2007) Tsuji-Trost reactions, (Kvasovs et al., 2023). and Wacker catalytic processes. (Zhang et al., 2023) In this chapter, we will focus on the applications of palladium and its salts in C-N bond-forming reactions.
2. Palladium (Pd)-Catalyzed C–N Bond Formation
Besides copper, palladium metal is considered as the most widely used metal in organic synthesis. The discovery of cross-coupling reactions catalyzed by palladium(0) complexes in the 1970s was a highly important achievement that substantially changed the strategy of organic chemistry. Best applications of the palladium salts are in enantiolective and new C-N bond forming reactions. Stephen L. Buchwald and John F. Hartwig opened up the catalytic scope of palladium in newer methodologies on C–N bond forming reactions during 1990s, (Ruiz- Castillo & Buchwald, 2016) and henceforth, new methodologies of carbocycles, heterocycles, and simple organic compounds have been created in large scales (Rayadurgam et al., 2021). The mechanisms of palladium-catalyzed C-N cross-coupling reactions are critically discussed in numerous high-quality research journals with different theoretical and experimentally proven methods (Beletskaya & Averin, 2021). However, the most acceptable mechanistic pathway to reaction products in these Pd-catalyzed reactions involving palladium is illustrated in Scheme 1. The process begins with the formation of a palladium complex through the reaction of an aryl halide (which can be aliphatic, heteroaryl, or functionalized alkenes/alkynes), a palladium salt, and amino nucleophiles. In the presence of a suitable base, the loosely bonded halide or any leaving groups are eliminated, leading to the formation of a palladium (IV) complex. This complex then undergoes reductive elimination, resulting in stable aminated aryl, heteroaryl, alkyl, or functionalized alkenes/ alkynes. Additionally, a more generalized reaction mechanism is presented in a circular pathway format, highlighting the bonding approaches, rearrangements, intermediate formations, and the final release of target compounds, as depicted in Scheme 1. The involvement of higher valence organo-palladium complexes in such catalytic transformations have been well established (Hickman & Sanford, 2012).

Bonsai is the art and science of dwarfing plants and growing them in shallow containers. The word ‘Bonsai’ is a Japanese term consisting of two words, ‘Bon‘- a shallow container and ‘sai’ - to plant. Therefore, bonsai is a technique of growing plants (trees, shrubs and others) in shallow containers in dwarf form. With the help of pruning, pinching and training a three dimensional effect is produced. It is a kind of living sculpture and idealized nature in miniature. An ideal bonsai is replica of a particular plant or an artistic variation in shape whose different parts are in complete harmony. Development of bonsai requires an artistic eye, skills on training, pruning and knowledge on growing plants in containers.

This technique was developed by the Chinese over 2000 years ago and later excelled by the Japanese. Bonsai is now popular all over the world and very useful for the people who are living in flats and have no scope to have outdoor gardens. Every house owner likes to have few specimen plants for interior decoration. Bonsai provides them an additional opportunity to grow more number of plants being dwarf in nature. Considering its present popularity, Bonsai is now important horticulturally for its commercial and aesthetic value.

Fruits are living commodities which continue to respire and transpire even after harvest. The storage life of fresh fruits is indirectly proportional to the rate of their respiration which in turn depends on the atmospheric gas composition in which they are stored. Normal air contains about 20.9% oxygen (O2), 78.0% Nitrogen (N₂) and 0.03% carbondioxide (CO₂). Lower levels of O₂ and higher levels of CO₂ in the storage environment result in reduced rate of respiration, delayed ripening and increased storage life. The reduction in O₂ concentration and increase in CO₂ concentration in the storage room with precise control and maintenance of these gases throughout the storage period is generally referred as controlled atmosphere (CA) storage.

CA storage is generally used for long term storage or long distance transportation of fruits in combination with low temperature storage. The use of CA storage for extending the post harvest life of fruits has increased steadily worldwide during the past 60 years. This trend is expected to continue with the advancement of technologies in attaining and maintaining CA during transport, storage and marketing of fresh fruits.

PLANT EXPLORATION AND GERMPLASM COLLECTION OF PLANT GENETIC RESOURCES

Plant exploration and collection activities have been undertaken for a wide range of needs - by naturalists, travelers and plant hunters over the past several centuries in the quest for new and better economic plants in the southeast Asian region, ornamentals in the Himalayas and many others; by taxonomists for working out plant diversity and delineating phyto- geographic differences, and providing a basis for pinpointing areas with high species diversity and changes over time; world-wide collection, augmentation and characterization of crop plant diversity by Vavilov and co-workers (1926) for understanding the patterns of crop plant diversity and delineating centres of diversity; search for wild forms of species, and wild relatives of crop plants for working out primary centres of origin and crop genepools; biosystematic study, survey and in situ study and collection in protected areas for determining patterns of diversity build-up in crop and wild species. Concept of centres of origin of crop plants, importance of the wild genepool of crops, dependence on wild plants as a source of edible and otherwise useful species ensuing from these efforts provide the basis for systematic exploration and collection of plant genetic resources.

19.1. Introduction

Quality is a measure of the degree of excellence or degree of acceptability by the consumer. It is also defined as the combination of attributes or characteristics of the products that has significance in determining the degree of acceptability of the product to a user. Industry defines quality as the measure of purity, strength, flavour, colour, size, maturity, workmanship or any other distinctive attribute or characteristics of the product. According to USDA Marketing Workshop Report (1951) quality is the combination of attributes or characteristics of a product that have significance in determining the degree of acceptability of the product to the user . The quality standards of fresh and processed fruit or vegetable products vary with their intended use. For marketing purposes; size, attractiveness, maturity, organoleptic quality and freedom from defects are to be kept in mind. While for processing, physico chemical attributes of raw material such as presence of soluble solids, development of uniform colour, flavour, juiciness, uniform maturity, tenderness in some vegetables etc are taken into consideration. During processing of fruit or vegetables into value added products; colour, flavour and texture etc also become important.

Introduction
A breeding value is essentially the additive effect of a trait of interest that can be passed on stably to offspring. In artificial selection, the breeding values of the genotypes are determined. Hence, the key question is how to quantify the breeding value of a genotype for a phenotypic trait of interest that is part of a breeding program. As part of the process of breeding livestock, the estimated breeding value (EBV) is predicted based on a model that relates the phenotype over a population of genotypes with their pedigree information by using the best linear unbiased prediction (BLUP). Nevertheless, this method is not feasible for populations with no pedigree information or a complex population structure, which is typically the case in plant breeding when there are no pedigree records. With genomic selection (GS), this problem is addressed by determining the genomic estimated breeding value (GEBV), which addresses the problem by using genome-wide markers and combining them with various machine learning approaches in order to estimate the breeding value (Meuwissen et al. 2001). It is for this reason that the GS models are developed in a training population that is both genotyped and phenotype. GS model that has been created can be used for predicting phenotypic traits in unseen genotypes as well as for genotype selection in another population, called the breeding population (testing population) that has genotyped data only. The GS procedure described here can be applied to predict phenotypic traits for inbred as well as hybrid populations. As a result of this procedure, GS cuts in half the time it would take for a breeding cycle to be completed in order to develop new cultivars. All GS approaches rely on a method that is statistical in nature as they use a mathematical relationship between genotypic and phenotypic data in order to predict genotypes values.
Genetic improvement of crops has been a cornerstone of agricultural development, making a significant contribution to the food security and economic growth of the global economy. Plant breeding poses a great deal of challenge when it comes to selecting the best individuals. The use of visual selection has not yielded the desired genetic gain compared to the results derived from the estimation of breeding values.

This chapter introduces the biological and physiological foundations of forest ecosystems, focusing on the structure, growth, development, adaptation, and survival of trees. It examines tree growth and development, photosynthesis, respiration, water transport, nutrient uptake, and plant responses to environmental stresses. The chapter also explores forest biodiversity, forest–atmosphere interactions, forest ecology, microbiology, entomology, and pathology. Particular attention is given to physiological, morphological, and anatomical responses of woody plants to drought, flooding, temperature extremes, salinity, and other abiotic stresses. These concepts provide a scientific basis for understanding tree health, forest productivity, adaptation, conservation, and sustainable forest management.

Abstract

Hills and mountains are an important agro-ecosystem, which have lagged  behind the plains in respect of agricultural development. The plains of India witnessed green revolution followed by white, yellow and blue revolutions, which not only increased production and productivity of food crops but helped in bringing about overall development that led to livelihood security in the rural India. The hills, however, remained technologically backward resulting in low agricultural productivity, which brought about livelihood insecurity in these areas. And this has happened despite the fact that a large number of top class institutions of the CSIR, ICAR, ICFRE, Atomic Energy 
Commission, GSI and BSI along with State Agricultural Universities have been present (in the region) and were engaged in developing technology relevant to agriculture and allied areas. However, these technologies did not reach to the end user i.e. the hill farmer for a variety of reasons. Therefore, technology development and dissemination have been accorded high priority by the state governments.

Fruit ripening is a highly coordinated, genetically programmed and an irreversible phenomenon involving a series of physiological, biochemical and organoleptic changes which finally lead to the development of a soft edible ripe fruit with desirable quality attributes. Ripening is the process where changes take place in the fleshy fruit and make it edible. It represents the unique coordination of developmental and biochemical pathways leading to changes in colour, texture, aroma and nutritional quality of mature seed-bearing plant organs (Barry and Giovannoni, 2007). Physiologically mature fruit is transformed from an unfavourable state of firmness, texture, colour, flavour and aroma to favourable state for consumption. It is the final phase in the development of fruit and involves major metabolic changes and it is normally an irreversible event. The ripening phase does not start until the fruit has developed considerably from the tissues present at anthesis and it is difficult to stimulate ripening before it attains maturity. The ripening changes which are common during softening are accumulation of pigments and changes in cell wall.

13.1 Introduction

Climate change is emerging out to be the greatest challenge to humanity. Climate change may be a change in the mean of the various climatic parameters such as temperature, precipitation, relative humidity, atmospheric gases composition etc. and in properties over a longer period and a larger geographical area. It can also be referred to as any change in climate over time, whether due to natural variability or because of human activity. Climate change is a global challenge threatening sustainability of agriculture and its impact is realized more in the fragile and vulnerable ecosystems. The resource poor small and marginal farmers are more prone to climatic aberrations than other farmers. Predicted population growth over the next 50 years will raise food demand globally higher (Trostle 2008), which is complicated by environmental changes such as climate, biodiversity, water availability, land use, atmospheric and other pollutants, and sea level rise (Misselhorn et al. 2012). Climate change has emerged as a serious global environmental issue having impact on all forms of life. It increases the greenhouse gases like carbon dioxide, nitrous oxide, ozone and methane which may cause impact in terms of increased temperature, more demand for water and increase in biotic and abiotic stresses. It has direct impact on agriculture and horticulture. Due to climate change, low production of horticultural crops is featured. Due to severe cold wave, horticultural crops suffer a yield loss of 10-100% depending upon crop and variety (Hazarika 2013). Mitigation strategies aim to reduce the impact of changes to climate and the associated risks from anthropogenic (human) processes. Adaptive capacity is defined as ‘‘the ability of a system to adjust to climate change (including climate variability and extremes), to moderate potential damages, to take advantage of opportunities, or to cope with the consequences’’ (IPCC 2001, p. 982).

Introduction

Pulses are the most important part of our diet, richest and cheap source of proteins, vitamins, minerals and amino acids besides high nutritional value. Hence, the economic value of these crops is very high. Pulses can be produced with a minimum use of resources and are mostly cultivated under rainfed conditions and do not require intensive irrigation (Sood et al. 2018). Keeping in view large benefits of pulses for human health; the United Nations has proclaimed 2016 as the International Year of Pulses. Thus, due attention is required to enhance the production of pulses not only to meet the dietary requirement of proteins but also to raise the awareness about pulses for achieving nutritional, food security and environmental sustainability. The Government of India through Indian Council of Agricultural Research (ICAR) has established a wide network of Krishi Vigyan Kendras (KVKs) in all the rural districts of the country. These KVKs under the aegis of the National Agricultural Research and Education System are the real carriers of frontline technologies and impart knowledge and critical input support for the famers. The frontline demonstration programme (FLDs) in pulses is a unique programme by Ministry of Agriculture, Govt. of India, conducted under close supervision of farm scientists. Main objective of FLDs in pulses is to demonstrate and popularize the improved agro-technology on farmers fields under varied farming situations for effective transfer of generated technology and f ill the gap between improved technology and adopted/indigenous technology to enhance pulse productivity and farms gains for sustaining the production systems especially under rainfed farming (Choudhary et al. 2009). The field demonstrations conducted under the close supervision of scientists of the National Agriculture Research System is called front-line demonstrations. The main objective of Frontline Demonstrations is to demonstrate newly released crop production and protection technologies and its management practices in the farmers’ field under different agro-climatic regions and farming situations.

Natural Gene Flow in Plants

More than 70% of plant species, for example potato, oat, rape-seed, wheat, and kiwifruit have come from spontaneous interspecific or intergeneric hybridization although the extent of natural hybridization differs among the plant genera and families. It creates genetic variation and produce recombinant genotypes that may exhibit heterosis.The stabilization of these hybrids often through polyploidy (autopolyploidy or allopolyploidy) can result in the formation of new biological species (Masterson, 1994), thereby, having impact on both ecological and evolutionary processes (Martinsen et al., 2001). In addition, species genomes are often differentially permeable to introgression if they are under simple genetic control (unlike many genes contribute to hybrid fitness with linkages) and certain portion of the genome can readily incorporate alien alleles. Introgression is a selective process of gene flow that filters deleterious genes and takes only beneficial genes (incorporating the alleles from one taxon into other).