eChapters

The Indian arid zone is characterized by high temperature, low and erratic rainfall which limits the scope for high crop productivity. However, these conditions greatly favour the development of improved quality in a number of fruits such as date palm, ber, aonla, bael, pomegranate, kinnow, lasoda and in vegetables such as cucurbits, legumes and solanaceous crops, spices, flowers, medicinal and aromatic plants. The existing low productivity could be increased by following improved new technologies and inputs. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas.

ABSTRACT

Minerals are important raw materials for the economic development of any nation. However, unscientific mining for minerals poses a serious threat to the environment. Mine spoils from outer Uttaranchal Himalaya are highly variable from loose to hard and compact at places. Rehabilitation technology for degraded mine sites consist of several steps, each of them playing an important role. Rehabilitation of these spoils is imperative to meet our demand of fuel, fodder, timber, reduce soil erosion and improve environmental pollution. The paper presents the efforts of rehabilitation of mine spoils in Uttaranchal Himalayas both mechanical as well as vegetative measures. Agroforestry techniques used in rehabilitation of mine spoils has been given in this paper.

INTRODUCTION

Himalayan region which constitute about 54 million ha (16.5%) area of the country is characterized by marginality, inaccessibility and fragility, compounded by high intensity erratic rainfall, steep slopes, large scale deforestation and faulty management practices. Natural resources in the region are under great stress due to mounting human and livestock populations. The increasing frequency of natural disasters, e.g. landslides, floods, droughts and deterioration of water bodies due to accelerated deforestation, conversion of marginal/forest land into agriculture and unscientific developmental activities e.g. mining, roads etc. further aggravate the problem. Soil erosion is the major constraint in crop production. High intensity rains in the monsoon season cause excessive runoff and soil loss. On erosion-prone steep slopes, about 50 per cent of the rainfall is lost as runoff, carrying with it 20 t ha-l soil.

Abstract

Starch is a naturally occurring biodegradable polymer and readily available from agriculture. It is widely used in food and non-food applications and isolated from crops such as maize, potatoes, tapioca, rice and wheat. However, in recent years substantial progress has been made on the molecular structure of cereal and tuber starches and their impact on functionality, the following is a subjective summary that presents status of knowledge on isolation of starch from non-conventional source like Acorus calamus (sweet flag). The focus is on potential application of the source as food and non-food derivatives. Extensive work has been carried out on agronomic and phenotypic properties for most tropical crops, but relatively little study has been carried out on the properties which are of direct technical and economic interest to competitive food and non-food industry. Sweet flag (Acorus calamus L.) is an emergent macrophyte, originating in Asia, commonly found in European wetlands. Rhizome is the most important storage organ in Acorus. It contains considerable amounts of carbohydrates and nitrogen-rich compound. This species is growing to 6 feet, with long lanceolate leaves %-inch wide with pronounced midrib, aromatic, with stout rhizomes. The major proportion of total non-structural carbohydrates in rhizomes is starch (91-93% and 51-64% in rhizomes and roots, respectively). However, amount of starch varies among the organs as well. Rhizomes contain the highest amount of starch followed by branched roots and finally by unbranched roots. Rhizomes comprises single to compound grains, with clusters present in high frequencies. Non-conventional food resources and their value addition have attracted attention in the recent years for their potential use as functional ingredients in food formulations, besides food they have also been used for non-food applications. So there is tremendous potential for the profitable commercial use of these tropical starches and exploring them for further use.

Abstract

The production of natural food colours through bio-processing is preferred now-a-days due to health related issues associated with their synthetic counterparts. Microorganisms are generally preferred sources as these have high production rate, high growth rate, ease of handling under controlled conditions and absence of seasonal variations. Biopigments can be produced from different genera of bacteria, yeast and mold. Different types and colours of pigments have been produced from microorganisms depending upon their origin, media components and process conditions. The biopigments have variety of applications in food industry such as food additives, food preservatives, biological control agents and nutritional supplements. These have also been associated with therapeutic, and antioxidant properties. Lycopene from B. trispora is used as a food ingredient in dietary supplement. Astaxanthin from X. dendrortious has also been reported to have beneficial effect on human health as it possesses strong antioxidant properties. Arpink red P. oxalicum is used as red colorant in meat products, non-alcoholic drinks, milk products and confectionary. 0- carotene is considered as leading food colorant in world and is applied to range of baked, dairy and canned foods to improve their appearance. The antioxidant andprecursory properties of0-carotene increase its applications in pet foods. Zeaxanthin is used as additives in poultry fed to intensify the colour of the egg yolk. Monascus pigments are utilized for coloration of sausages, ham, marine products and tomato ketchup. Monascus extract is also marketed as dietetic supplement in Japan. Thus, the biopigments can serve as a chromophore for colorant production with broad spectrum of colours and wide applications.

Introduction

The purpose of this e-book is to outline the main hazards in food production and processing that could influence the safety of foods and thus the health and wellbeing of consumers. The suggestive actions to restrain the formation of compounds or organisms that may threaten the safety of a food will be discussed along with the legal and regulatory framework.

“Safe Food Now for a Healthy Tomorrow”

Food is the third most basic human need, after air and water. Only when food is safe can it contribute to our food security and health. When food is not safe, people cannot thrive, hunger and poverty cannot be alleviated, and a healthy life is not possible. Food safety has a significant impact on human health, and food, which is essential for human survival, comes from plants and animals. Food safety is a core tenet of One Health.

This chapter gives an overview of the main hazards such as physical hazards, chemical hazards, biological hazards, and adulterants in different types of foods and how the hazards influence the safety of the food along with health and well-being of the consumers. The effective way of management of these hazards and different hazard limits set by the regulators such as FSSAI, USFDA, EU AND CODEX along with labelling requirements for the hazards has been discussed in this chapter.

Agriculture and allied service sector in Karnataka, contributes about one third to the state Gross Domestic Product (GDP).  This sector still continues to be the largest source of employment in the state with about 70% of the population depending on it.  Agriculture plays a key role   in the state’s economy with a net-cropped area of 107.90 lakh ha. of which 23.20 lakh ha. is irrigated and 84.79 lakh ha is rainfed.  In today’s competitive environment, one need to rethink about the sustainability of development, whether it is individual or the area and agriculture or any other field .To develop the rainfed area and the people, the World Bank assisted Sujala Watershed Project is implemented through the Karnataka Watershed Development Department (KWDD).  This has become a boon towards sustainable development of the rainfed area and the people. The first phase of KWDP focuses on poverty alleviation and improvement in agricultural productivity through its multi faceted approach.  That is, the land treatment for improving their agricultural productivity and strengthening Self Help Groups (SHGs) in the selected area to take up viable Income Generating Activities, which paves way for the overall development of the area and the people living there.  The project area covered five districts namely, Kolar, Tumkur, Chitradurga, Haveri and Dharwad in Karnataka state of India.

Introduction
Agroforestry systems have the potential to make use of marginal and degraded lands through the soil improving effects of trees. Underlying all aspects of the role of agro forestry in maintenance of soil fertility is the fundamental proposition that trees improve soils. It would be useful to have guidelines on which properties of a tree or shrub species make it desirable for the point of view of soil fertility. This would help in identifying naturally occurring species and selecting trees for systems which have soil improvement as a specific objective.
Agroforestry is a sustainable land management system which increases the overall yield of the land, combines the production of crops (including tree crops) and forest plants and/or animals simultaneously or sequentially, on the same unit of land and applies management practices that are compatible with the cultural practices of the local population. Nitrogen fixation and a high biomass production have been widely recognized as desirable. However, many properties are specific to particular objectives of systems in which the trees are used. Even species that are shunned for their competitive effects may have a role in certain designs. An example is the way in which Eucalyptus species with a high water uptake, which adversely affects yields in adjacent crops, have been employed to lower the water table and so reduce salinization The agroforestry systems comprises Agrisilivicultural systems (improved fallow species in shifting agriculture (jhum), hedgerow intercropping (alley cropping), multispecies tree gardens, multipurpose trees/shrubs on farmlands, plantation and other crops, shade trees for commercial plantation crops, soil conservation hedges etc.), Agrisilvipastoral systems (tree- livestock-crop mix ground, home garden, woody hedgerows for browse, green manure, soil conservation etc., integrated production of crops, animals ,fuelwood, poles, etc.), Silvipostoral systems (multipurpose fodder trees on or around farmlands,

Introduction

The fast development of technology for increasing production ignoring the agroecosystem resulted in disturbed natural cycles. The result is visible in terms of unsustainabiliity in agroecosystem. In addition, increasing use of chemical pesticides for the management of soil-borne plant pathogens had caused pollution of soil, surface and ground water besides affecting the crop produce and ecosystem. The pendulum of public opinion once so favourable to chemical control has gone against chemicals and advocated phasing out the chemical pesticides. Revival of the natural balance is therefore needed for sustainable farming with eco-friendly methods such as bioagents/biopesticides, soil solarization, botanicals, etc. Organic farming is one such approach which emphasis on maintaining the natural cycle with eco-friendly approaches.

1. Introduction

Cucurbits are group of plants belongs to family Cucurbitaceae which are mostly creeping or crawling in nature and distributed in tropical and subtropical zone of the globe. The family cucurbitaceae has around 120 genera and more than 800 species (Swarup, 2016). It holds the highest rank amongst all other plant families considering number and percentage of species used for human consumption either as fruit of the tender leaves and stems. Cucurbits have diverse daily use such as salad (cucumber and long melon); dessert (watermelon and muskmelon), curry or boil (bottle gourd, bitter gourd, sponge gourd, ridge gourd, summer squash, squash melon, pumpkin etc.); candy (wax gourd); pickles (pickling cucumber, pointed gourd); jam (pumpkin); utensil (bottle gourd), musical instruments (bottle gourd). From plant breeding point of view, the crops are cross pollinated and entomophilies.

ABSTRACT

Biofertilizers can supplement the chemical nutrients and helps in reducing the production expenditure in agriculture. Crop biofertilization with microbial consortia is an important strategy to improve the physical, chemical and biological conditions of the soil. The facultative methylotrophs are capable of fixing atmospheric nitrogen, besides it produces phytohormones viz; IAA, GA and cytokinin, vitamin B₁₂, polysaccharides, PHB, and siderophores. The essential nutrients are considered as the most important, among the factors limiting growth and yield of the tomato crop. The application of adequate amount of fertilizers is a pre-requisite for exploiting the genetic potential of tomato variety. Therefore, efficient and economic use of the fertilizer with microbial consortia would help in decreasing the input costs for raising bumper crop.

More number of studies carried out on the effect of facultative methylotrophs in different parts of the world and in India. The results confirmed that the facultative methylotrophs have a greater importance in increasing the growth and yield of various crop plants. Keeping this in view an experiment was conducted to find out the interaction effect of facultative methylotrophs with other bioinoculants viz., Azospirillum, Azotobacter, PSB and VAM (by seedling dip method followed by PPFM phyllosphere spray) on yield of tomato var Ruchi. The results showed that the treatment with above microbial consortia (50.71 t/ha) was found to increase the yield of the tomato crop by 62.73 percent over uninoculated control (18.90 t/ha) and individual treatments.

The hot arid regions of India are spread over 32 million hectares in the states of Rajasthan (61%), Gujarat (20%), Punjab (5%), Haryana (4%), Karnataka (3%) and Andhra Pradesh (7%). The arid regions of western Rajasthan experience an annual rain fall between 100-500 mm with a coefficient of variations varying from 40-70 per cent. Low and erratic rainfall coupled with extreme temperature results in complete or partial crop failure, considerably affects the agricultural economy of the region. High wind velocity causes wind erosion and shifting of sand dunes covers the fertile agricultural land and canals (Rao and Singh,1998). The rise in temperature begins from March onward and attains its peak in May as high as 46°C. The transpiration is low during winters but during summer in months (May & June), it reaches up to 16 mm per day. The annual estimated potential evapotranspiration values ranges from 1600 mm in eastern part and 1800 mm in western part of the region.

In the arid regions of Rajasthan, Haryana, Punjab and eastern part of arid Gujarat the soils have developed from alluvial and aeolian parent materials. In context to the type of soils light brown sandy soils with dune dominance is 30.6 per cent and associated others 34 per cent area, light brown soils 1.7 per cent, Grey brown soils 13.6 per cent hard pan in 5.9 per cent and seirozems in 1.7 per cent area (Dhir, 1977). Kolarker et al. (1989) reported that in 12 district of Rajasthan sandy soils dominated in 14.3 million ha. These soils are poor in fertility very low organic carbon (0.03-0.1%), light in texture called desert soils (north western) in the order of aridisols. It has undulated topography with the dominance of sand dunes inter-dunal plains. About 80 per cent area falls under rain fed cropping and moth bean, cluster bean, pearl millet, and sesame are the main crops grown during kharif season after the onset of monsoon. Under the vagaries of monsoon and recurrent drought the rain fed cropping becomes a gamble, which creates severe food and fodder scarcity in the region.

ABSTRACT

The popularity and belief in natural and herbal healthcare systems is inseparable from traditional ethos and practices in India. India has been known to be a rich repository of medicinal plants since time immemorial. Now many countries like China, Cuba, India, Sri Lanka, Thailand etc. have endorsed the official use of traditional system of Medicines in their healthcare programmes. The western system of medicine (allopathy) too has a large component of plant based drugs and most potent medicines use specific chemical constituents which in turn has generated bulk demand. A dramatic increase in exports of MAP’s (medicinal and aromatic plants) attests to global interest in their products as well as in the traditional health system. Past efforts of 27 years in agroforestry research and extension is now yielding results; Agroforestry is coming up in private as well as community lands in a big way for both subsistence as well as commercial purposes. Incorporation of medicinal plants in agroforestry will not only diversify the cropping system but will also lead to conserve and reduce pressure on medicinal plants in forest besides improving economic status of the farmers.

Introduction 
It is commonly acknowledged that the swift rise in urbanization and population expansion is the primary reason for the increasing consumption of fossil fuels, which ultimately results in the exhaustion of fuels generated from petroleum. Globally, the scarcity of fossil fuels poses a significant challenge. Furthermore, there are significant worries about the negative impacts of the heavy reliance on petroleum-based fuels on the economy, energy and the environment conservation. Consequently, extensive research has been dedicated to identifying alternative sources that can mitigate the dependence on fossil fuels [1]. Biofuels have garnered worldwide attention as a potential substitute for fossil fuel-derived fuels, given their distinctive qualities [2]. Utilizing a variety of plant sources, including sugarcane, corn, soybeans, vegetables, palm oil, and Jatropha (often used in Africa), biofuel production is progressing on almost every continent. Bioethanol is successfully used as a biodiesel in addition to gasoline for otto-cycle engines in nations like the USA and Brazil [3]. Conversely, biodiesel represents a significant category of biofuel capable of partially or fully replacing diesel obtained from fossil fuels. Biodiesel is made via a process called trans-esterification that uses renewable biolipids [4]. Biodiesel can be produced from oil that comes from nonedible agricultural seeds or kernels [5]. Furthermore, edible oils from plants such as sunflower, palm, and soybean are used as feedstocks to produce biodiesel [6]. In the field of biofuel research, nanotechnology and nanomaterials have proven to be useful instruments for improving output quality at a reasonable cost. Algae stands out prominently in discussions about biofuel production due to concerns related to food resources. Types of biofuels and their sources are represented in the (Fig.1). The use of crops and plants yielding food is considered unsuitable for prioritizing biofuel production due to potential disruptions in food supply. Notably, various algal species vary in their production capacity. The utilization of nanoparticles (NPs) is advantageous in biofuel synthesis due to their unique characteristics, including a substantial surface area to volume ratio, adsorption capacity, high crystallinity, and stability. This distinguishes them from competing sources as better possibilities [7]. In the process of creating biofuels, metal oxide nanoparticles and carbon nanotubes are widely used as nano-catalysts because of their extra characteristics that allow for their high potential recovery [8]. The overall procedure for producing biodiesel on a small scale and for experimental purposes using algae are shown in the (Fig.2).

Introduction 
The overuse of fossil fuels is expanding simultaneously with society’s rapid development, which culminates in a decrease in fossil energy and a very serious deterioration of the environment. The purpose is to make the carbon neutral as fast as possible, which will make the invention of alternative energy sources to replace the fossil fuels. To make world a better place to live, fossil energy is highly needed to be conserved and measures should be made to limit the use of fossil energy. After many researches, the alternate to fossil energy has been made in the form of “BIODIESEL”. Biodiesel, which is produced from renewable resources such as vegetable oil is a new clean alternative to fossil fuel. Biodiesel in the new era of scientific field is mainly produced from Microalgae. Production of biodiesel from microalgae ensures reusing carbon resources from nature. This method contributes to achieve in replacing petroleum use and also helps in reducing pollution in the environment. Biodiesel consist primarily of esters which is formed by methanol or by ethanol and long chains of fatty acids which may be saturated or unsaturated such as palmitic acid, stearic acid, oleic acid and linoleic acid. This is the main and ultimate reason why production and use of biodiesel is attracted the attention of researches worldwide. The biodiesel is developed in three generations that is First, Second and Third generation Microalgae are single-celled organisms which are microscopic. They are an essential component of carbon cycle and they can exploit carbon sources in water and soil efficiently and have plenty of advantages over the other biodiesel sources that are conventional oil crops such as wheat, palm, corns, soybeans, maize and rapeseed. In this century, one of the most important environmental issues is global warming, that is caused by released of greenhouse gases. These microalgae have high rates of biomass production and can survive in a variety of circumstances, such as freshwater, saltwater, and wastewater (Muhammad Abdullah et.al 2024) Their ability to be grown on non-arable ground and their lack of resources competition with food crops are two of their most significant and crucial advantages. The process of producing biodiesel from the microalgae involves many stages. The stepwise structure involves lipid extraction, microalgae cell disruption, harvesting, culture and transesterification. Microalgae re a promising source of biodiesel as they have a high lipid content and can grow quickly. But they are complex in composition and they require a specialized harvesting system. Nanoparticles are an ultrafine unit and have dimensions which are stated in nanometers. These nanoparticles can be detected in the natural environment and can also be generated by human activity. Because of their sub-microscopic size, they boast unique material properties and may be used in many different kinds of fields, namely environmental remediation, engineering and medical care. In 2008, International Organization for Standardization (ISO) defined this nanoparticle as a discrete nano-object in which all the Cartesian dimensions are less than 100nm. Nanoparticles are classified into different types according to their shape,

Introduction

Pheromones are chemicals emitted by living organisms to send messages to individuals of the same species. The class most widely explored are the sex pheromones produced by female moths which are used to attract conspecific males for mating. Bombykol, the sex pheromone of the silk moth, was first synthesized in 1959.

During the past 40 years, pheromones of hundreds of insect species have been chemically elucidated, including the sex pheromone of the codling moth. Its main component is (E, E) 8, 10-dodecadien-1-o1, a primary alcohol containing a straight chain of 12 carbons and two conjugated double bonds. Other moth pheromones are hydrocarbons, epoxides, acetates or aldehydes. These molecules all vaguely resemble fatty acids, from which they are indeed biogenetically derived.

Most pheromones consist of blends of two or more chemicals which need to be emitted at exactly the right proportions to be biologically active. The female effluvia or sex gland can contain additional compounds which are related to the pheromone components and whose biological function is often unclear. On the other hand, many attractants of male moths have been discovered simply by field screening. In several cases it could later be shown that the attractant found with this technique was identical to the natural pheromone produced by the female. In most others, the composition of the true pheromone is still unknown.

ABSTRACT

To study the antagonistic potential of rhizobacteria against the soil borne pathogen Rhizoctonia solani, soil bacteria were isolated from the rice fields of Agricultural Research Station, Mannuthy and screened against R. solani. Out of the 22 rhizosphere bacteria, 10 were found to be antagonistic to R. solani. Seven belonged to the genera Bacillus, Pseudomonas, Clostridium and Sporosarcina and the rest three being unidentified. The bacterial isolates viz., 2B, 4B, 19B (Bacillus sp.), 28B and 10B (Sporosarcina sp.) showed increase in inhibition on extending the period of incubation. Maximum inhibition was expressed by 2B on the third day of inoculation followed by 4B, 10B (Sporosarcina sp.), 7B (Bacillus sp.) and Pseudomonas fluorescens. The bacterial isolate 4B and 7B (Bacillus sp.) and 10B (Sporosarcina sp.) completely prevented the sclerotial production of R. solani whereas 1B (Clostridium sp.), 2B, 19B (Bacillus sp.) and P. fluorescens delayed the sclerotial production. Pot culture studies also confirmed the superiority of these rhizobacteria in controlling the infection by R. solani. The potentiality of these rhizobacterial antagonists can be exploited for the management of soil borne pathogens like R. solani.

ABSTRACT

Natural sources have been exploited since the dawn of civilization for the sustenance of mankind. With the passage of time numerous medicines were discovered to treat various maladies utilizing the vast resources of land and the sea, along with the knowledge base support of folklores and folk medicines of different regions of the world, Marine natural products chemistry has gained prominence during the last four and half decades with a view to harnessing the vast potential of the sea particularly in search of drugs by virtue of modern science and technology. Products of marine algae or seaweeds have been used as medicine as well as food and feed and latterly as nutraceuticals. Advanced societies of the world consume seaweed extracts (in the form of alginates, agars and carrageenans) every day in their foods or pharmaceuticals that is complemented by the excellent safety records of commonly ingested species. In this account, I will be focusing on the health care applications of seaweeds.

Health care has two aspects e.g. healing or amelioration of disease conditions with medicines and the other being sustenance of the health system. Seaweeds have been reported to be the source of many bioactive and nutritionally important compounds e.g. antibacterial, antiviral, immunomodulator, cytotoxic, anticancer, neurotoxic, blood anticoagulant, antifertility, vitamins, proteins and minerals. Status of these activities in India and elsewhere in the world has been discussed.

Introduction

The horticulture sector is contributing over 30 per cent share in agricultural GDP of the country. Presently, India producing about 351.92 million tons of horticultural produce from 28.04 million hectare which has surpassed the food grain production for last five consecutive years (Anonymous, 2023). Horticulture sector has been identified by Government of India also identified horticulture as one of the vital sector for entrepreneurship development, employment generation, livelihood and nutritional security, doubling farmer’s income, achieving SDGs of the United Nations.

Fruits and vegetables have become part of a modern healthy lifestyle as they possess high amounts of minerals, especially electrolytes, dietary fiber, phytochemicals, especially antioxidants, and vitamins (Yahia et al., 2019; Krishnan Kesavan et al., 2023). In consumption, the qualities of products play a critical role in consumers’ choices, which are directly related to health problems (Tian, and Xu, 2022). Bioactive compounds are phytochemical substances present in small quantities in plant materials that can provide biological activity, being generally associated with health benefits, including hepatoprotective, anti-inflammatory, antioxidant, antithrombotic, anticarcinogenic, antidiabetic and prevention of cardiovascular and degenerative diseases (Campoli et al., 2018). Therefore, maintaining high-quality fruits and vegetables is very important for the fruit and vegetable industry. This requires some methods to evaluate the quality of fresh fruits and vegetables during their post-harvest manipulation and storage and before their industrial processing as well (Tian and Xu, 2022).

Introduction

Integrated farming systems (IFS) generate a large amount of organic waste matters. In general, these residues should can be reprocessed appropriately within agri-business systems to fulfil the nutritional and energy demands in the enterprises (IFS) in order to increase productivity. To reduce the heavy consignment of organic waste matter from the Integrated farming systems, The Multi Resource Vermicompost (MRV) was defined by the IFS as an organic fertiliser made from waste produced in crop production, farm animals, agriculture, and vegetation through bio-oxidative degradation processes facilitated by earthworms and microorganisms in the soil.

1. INTRODUCTION

The terms antioxidants and free radicals are being very effective used nutritionists and other health professionals. Antioxidants are compounds are good for health and free radicals are harmful. In general, antioxidants neutralize free radicals that are generated in the body and prevent damage to cell proteins, lipids and carbohydrates. Antioxidants can be water-soluble or lipid-soluble, thus they exist within the lipid or within the water portion of cells. Antioxidants are substances when present in food or in body at low concentration retards or prevents undesirable oxidation of substrates by free radicals.

Within the human body, millions of processes are occurring at all times. All cells require oxygen to generate energy; higher eukaryotic organisms cannot exist without oxygen. Unfortunately, that same life giving oxygen can create harmful side effects which cause cell damage and lead to chronic disease. Damage caused by free radicals is called oxidation. Oxidative stress is the disturbance in the prooxidant-antioxidant balance in favour of the former, leading to the potential damage.