eChapters

Introduction

Fermentation is one of the oldest food preservation techniques that can be traced back thousands of years. Fermentation is referred as one of method of biopreservation as it leads to extending the shelf life of foods that involve the use of microorganisms and their metabolites. (Ross et al., 2002) For millennia, the fermentation of food by using micro organisms has been used as a technique for ensuring shelf life extension and improving the quality characteristics, texture and flavour of food products as well as to develop new innovative products. The major bacteria used in food fermentation worldwide are lactic acid bacteria (LAB). LAB is a multitude of genera including Lactobacillus, Lactococcus, Streptococcus, Leuconostoc, Pediococcus, and Enterococcus. Lactic acid bacteria constitutes a diverse group of bacteria that enjoys the status of “generally regarded as safe” (GRAS) and “qualified presumption of safety” (QPS) by the Food and Drug Administration (FDA) and European Food Safety Authority (EFSA), respectively. In this respect, starter microorganisms are known to produce a wide array of antimicrobial and protein-acoustic compounds to inhibit the growth of undesirable flora in foodstuffs resulting in shelf life extension. (Hill et al., 2017).

1. Introduction

Antheraea assamensis is lepidopteron insects of Assam which is commercially utilized for the heritage golden silk “muga”. Rearing of muga silkworm is one of the most significant traditional handloom industries restricted only to the North Eastern Region of India (N.E. India) and plays a major role in the rural economy.  Considering the ecological conditions, food plant distribution, presence of eco-types and species of diverse nature in co-existence, it is speculated that this region is a possible home of origin of Antharaea, from where radiations would have occurred (Neog et. al., 2010). Despite the fact that N.E. India is the original home of muga, earlier studies have shown that the population is declining due to depletion in genetic variability (www.cdfd.org.in/wildsilkbase/info_moths.php).

Key Facts
    
•    The United Nations Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as a ‘Change of climate which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods’.
    
•    The main green house gases (GHG) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (NO₂).
    
•    CO₂ is the principal anthropogenic greenhouse gas that affects the Earths radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310 respectively.
    
•    CO₂ is responsible for most of the enhanced green house effect of more than 50%, CH4 about 10 to 15% and NO2 about 4%.
    
•    The global atmospheric concentrations of carbon-dioxide, methane and nitrous oxide have increased since 1750, CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and NO₂ increased from 270 ppb to 319 ppb in 2005.

18.1 Determination of Electrical Conductivity of Soil Solution

The conductivity or more precisely the specific conductance of a soil at a given soil-water ratio is the reciprocal of the specific resistance offered by the solution at 25ºC between the electrodes of 1 sq cm cross section kept 1 cm apart. Thus, the electrical conductivity of any solution depends on the amount of soluble salt present in it. Knowledge on the extent of salinity is important for management of saline soil including the choice of the crop suitable for that soil. Soluble salt content in saturation extract is more reliable index of salinity level than in soil: water ratio of 1: 2 or 1: 2.5, because it simulates the extent of salinity experienced by crop in field moisture condition.

Salinity class of soil is based on the electrical conductivity (EC) of saturation extract at 25ºC. However, EC of water extract from 1:2 soil-water suspension can be transformed into the EC of saturation extract following the formula (except for soil containing gypsum).

Abstract

Grazing animals have developed symbiotic relationship with anaerobic microorganisms, which survive in their rumen and help in the oxidation of complex molecules of feed containing lignocellulosic materials into volatile fatty acids. The consortium comprises anaerobic bacteria, fungi and protozoans. The rich microbial diversity of rumen remains constant after its establishment and does not get affected by intruding contaminants along with feed or water. The rumen contains a wide range of microbes such as Fibrobacter spp., Ruminococcus spp., Clostridium spp., Prevotella spp., Eubacterium spp., Methanobacterium spp., Treponema sp. Lachnospira sp., Bacterioides s pp., fungi: Anaeromyces s pp., Neocallimastix spp., and protozoa: Enoplastron sp., Eudiplodinium spp., Ostracodinium sp. They often have a variety of enzymes, glucanases, xylanase, glucuronidase, pectinase and amylase, etc. These enzymes inhabit the microbes and even break down complex molecules into simpler forms like; glucose and volatile fatty acids. The present chapter discusses on the role of microorganisms of rumen.

ABSTRACT

Nanomaterials will potentially play an important role in water quality. Production and applications of nanomaterials in industry are increasing. Furthermore, there are a handsome number of marketed nanomaterial-based consumer products. Therefore, how nanomaterials diagnose and function and how they perturb normal biological systems all become a top concern. In recent years, researchers are actively engaged in such investigations and discussions. At the same time, technologies and methods are developed to make more targeting nanoparticles for use in water.

Key words: Nanomaterial, Applications,Water quality

Weed is a plant that is growing in the wrong place. Weeds have many mechanisms and characteristics that enable them to compete, having thick waxy cuticle leaves that can be resistant to some chemicals, fast reproduction methods, the ability to reseed in 6 week cycles and deep tap roots enabling the weed to survive in compacted dry ground conditions.

There are many reasons to control weeds in annuals/biennial and perennial ornamentals. Weeds compete with the plants by absorbing essential nutrients and water, or by blocking light or air circulation. Weeds dramatic reduce the growth of the plants. The greatest damage is often done when the weeds and ornamental plants are small. Weeds also interfere with harvesting by physically hindering. They lower flower quality further by harbouring insects, such as whiteflies, thrips mites, slugs, snails and/or diseases.

Growing under optimal conditions for the flower will reduce the ability of weeds to compete against the crop. Controlling humidity/ventilation, water, light, pH, nutrients and temperature all figure prominently in providing flower optimal conditions. A plant health strategy to greenhouse weed control contains three principal elements, prevention/sanitation, evaluation of water quality and using all controls available physical, cultural and chemical. Prevention and sanitation can include the use of mulches in orchidhouse weed control. Rice hulls, perlite, pumice, corn gluten meal bark, Penn Mulch - pelletized recycled paper and human hair have all been used for this purpose. Prevention also includes, eliminating air borne weed seeds from entering the greenhouse by screening vents and other openings and preventing perennial weeds from growing under foundations. A 1-3 meter weed free zone should be maintained immediately adjacent to the greenhouse.

Introduction

Planning is a “dynamic act of reflecting about, thinking about, and choosing among various options regarding the goals and objectives and the route to journey i.e. educational experience, we should follow to reach those destinations” (Forest and Baker, 1994). It offers opportunity to people to “participate” and “contribute” in the process. Therefore, it is understood that “planning extension programs has become an increasingly accepted practice among national authorities” (Maalouf, in Rivera, 1987, p. 116 as cited by Cristovao et al?, 1997).

Introduction

Agricultural organic waste residues pose a significant challenge in India, generating approximately 700 million tonnes annually, with agri-residue trash reaching around 998 million tonnes per year (Kannan and Kallapiran, 2022; FAO, 2022). These wastes, including sugarcane bagasse, paddy and wheat straw, husk, vegetable and food waste, jute fibers, crop stalks, and other materials, often face improper disposal methods such as burning or dumping, which contribute to environmental pollution and health hazards (Singh et al., 2020; Sharma and Patel, 2019). Proper management and treatment of agricultural waste are crucial for sustainable agriculture and environmental protection (Kumar et al., 2021). Composting is a cost-effective biological treatment that converts these residues into valuable resources like plant nutrients, reducing the carbon-to-nitrogen (C:N) ratio and enhancing soil productivity (Kannan and Kallapiran, 2022; Gupta et al., 2020). Aerobic microbes play a key role in breaking down complex organic materials during the composting process, leading to ecological succession of microbial communities. This transformation can be measured through various quality and stability indicators, such as the C:N ratio, temperature, pH, moisture content, and the presence of pathogens like coliform bacteria (FAO, 2012; Patel and Verma, 2021).

Introduction

The process of recycling involves the conversion of waste materials into reusable products or materials and aims to reduce the consumption of fresh raw materials, minimize energy use, and mitigate trash creation. The primary objective of recycling is to effectively preserve finite resources, safeguard the natural environment, and mitigate the volume of garbage deposited in landfills or subjected to incineration (Lienig et al., 2017). Recycling refers to the systematic transformation of discarded materials into fresh resources and tangible products. The aforementioned term often encompasses the process of extracting energy from waste materials. The recyclability of a material is contingent upon its capacity to regain the characteristics it has in its initial form. There exists an alternative approach to garbage disposal that has the potential to save resources and mitigate the release of greenhouse gases. Additionally, it can mitigate the waste of potentially valuable resources and diminish the use of pristine raw materials, therefore reducing energy consumption, air pollution resulting from incineration, and water pollution stemming from landfill practices. The promotion of environmental sustainability is achieved by the removal of raw material input and the redirection of waste output within the economic system. The increasing volumes of trash have given rise to several environmental challenges, including air pollution, water pollution, soil contamination, and biodiversity loss. The emission of diverse greenhouse gases from solid waste landfills also contributes to the phenomenon of global warming. At now, the predominant techniques for solid waste disposal are open dumping and landfilling. Various alternative techniques, such as pyrolysis, gasification, anaerobic digestion, composting, and bio-methylation, are used to extract valuable resources from solid waste materials (Griffin et al., 2018).

Plant oils are obtained from their plant hosts through a variety of processes commonly called Extraction process. Essential oils are extracted from different parts of the plants. The quality and quantity of the oil is mainly depends on the method of extraction and the quantity of the raw materials used. For example, Lavender is extracted from its flowers, Orange from the rind of its fruit, Frankincense from the resin of its tree, Cinnamon from its bark, Pine from its needles, clove from flower buds and so on. Production of a good quality essential oil, the cultivation factors also play a vital role like soil quality, climatic and geographic conditions etc. As example, Jasmine flowers must be picked by hand at dawn on the very first day they open. A Sandalwood tree must be 30 years old and 30 feet high before it is ready to produce its best quality oil. Further the quantity of the plant materials are also matters for the price and quality of the essential oil. As an example, it takes roughly 12,000 Rose blossoms to produce 5 ml of Rose. Whereas it take 100 kilos of Lavender leaves to produce 3 liters of Lavender. As a result Rose is roughly 24 times more expensive than Lavender.

Pruning is a regular part of plant maintenance involving the selective removal of specific plant parts. Although shoots and branches are the main targets for removal, roots, flower buds, fruits and seed pods may also be pruned. Pruning wounds plants, but plants respond differently to wounding than do animals. In plants, damaged areas are covered by callus tissue to close wounds. Another response to pruning occurs inside plants. Chemical boundaries form around wounded areas, walling off or compartmentalizing the wounds. Compartmentalization limits any decay that results from wounding, or from the natural death of branches. Use pruning techniques that minimize plant wounding and speed wound closure.

Netting yarns for the fabrication of fishing gear are either of textile or non-textile origin. Textile materials compose of netting, twine and rope while non-textile origin materials constitute floats, sinkers, hooks etc. Raw material for fish netting consists of fibres which can be distinguished into two groups: natural fibres and man-made fibres. Different kinds of fibres originating from plant and animal body parts have been used for production of textiles and other products and are termed as natural fibres. Natural fibres such as cotton, manila, sisal, jute and coir were the materials exclusively used in earlier days for fishing gear fabrication.

Later, the invention of polymers resulted in synthetic fibres the use of which revolutionalized the fishing industry. In recent decades advances have taken place in fiber technology, along with the introduction of other modern materials. With the introduction of man-made synthetic fibers in India in the late 1950s, natural fibers used for the fishing gears have been substituted by these synthetic materials due to their high breaking strength, low maintenance cost, long service life and better uniformity in characteristics. Most important synthetic fibres used in fisheries are polyamide (PA), polyester (PES), polyethylene (PE) and polypropylene (PP). Other synthetic fibres, which are less widely used and generally restricted to Japanese fisheries, are polyvinyl alcohol (PVA), polyvinyl chloride (PVC) and polyvinylidene chloride (PVD). Earlier, netting used to be fabricated manually, which is laborious and time consuming while the introduction of synthetic fibres paved way for machine made nettings which are almost exclusively used in fishing net fabrication.

Introduction

Reviving the agricultural economy is a crucial endeavor with far-reaching implications for food security, economic prosperity, and sustainable development. Several key strategies can be adopted to achieve this goal. First, policymakers must prioritize agriculture by providing necessary f inancial support, infrastructure development, and research and development investments. Adequate credit facilities and subsidies can help farmers access essential resources and modern technology, boosting productivity and efficiency (Asian Development Bank, 2018). Promoting sustainable agricultural practices is vital to ensure long-term viability. Encouraging the adoption of eco-friendly methods such as organic farming, crop rotation, and water-efficient irrigation can enhance environmental resilience while safeguarding natural resources for future generations. Empowering farmers through training and education is essential. Equipping them with the latest knowledge and techniques enhances their capacity to adapt to changing conditions and make informed decisions about crop selection, pest control, and market opportunities. Furthermore, enhancing market linkages is critical to connect farmers with consumers and ensure fair prices for agricultural produce (African Development Bank, 2022). Developing efficient supply chains and reducing post-harvest losses can improve income prospects for farmers and attract more youth to the sector. Lastly, encouraging private sector involvement and investment in agriculture can accelerate growth and innovation. Public-private partnerships can create opportunities for technological advancements, value addition, and market expansion (Liu & Lee, 2018). Reviving the agricultural economy requires a collaborative effort involving governments, farmers, the private sector, and civil society. By addressing challenges, investing in modernization, and promoting sustainable practices, nations can create a thriving agricultural sector that contributes to food security, economic development, and environmental sustainability (Brown, 2021).

Key facts

    
•    Agriculture is the major land use across the globe. Agriculture production (plant growth) is highly dependent on climate since crop growth is influenced by solar radiation, temperature and precipitation. Agriculture is also sensitive to climate variability and weather extremes (droughts, floods, severe storms).
    
•    The yields of C₃ crops (rice, wheat, and soybean) is expected to increase (10-20%) with predicted doubling of CO₂ concentrations compared to C₄ crops (maize, sorghum, millet, sugarcane) since C₃ plants respond readily/positively to increased CO₂ levels. Therefore, CO₂ enrichment may benefit temperate and humid tropical agriculture compared to semi-arid tropics.
    
•    The predicted rise of temperature could impact crop and horticulture yield if it exceeds optimal temperature range. For example, low latitudes crops are being grown near the limits of temperature tolerance and global warming may put them to higher stress.
    
•    On a world wide basis, global warming would benefit the mid to high latitude zones for agriculture (for a small change of temperature of 1-3^ºC), whereas low latitudes, semi-arid and tropical areas will have much reduced crop and livestock yields. However, adaptation measures may reduce such impacts.

Safety is a primary concern regarding traditional and complementary therapies. There are two aspects of safety evaluations. First, to ensure that the right quality of material and apt possesses are used from sourcing to marketing; and second, there is no contamination, adulteration or spiking. Few studies have reported adulteration with steroids in some traditional Chinese dermatological preparations. In an analysis of Chinese herbal creams prescribed for dermatological conditions, Keane et al. found that eight of eleven creams analyzed contained steroids194. Spiking with corticostreoinds has been observed in some market preparations claimed to be useful in the treatment of arthritis and asthma195. Recently, Saper et al. from Harvard Medical School have reported heavy metal content of Ayurvedic herbal preparations and have recommended mandatory toxic heavy metal testing196. There have been few reports of heavy metal toxicity following traditional medicine use197,198. Such studies are important and needed, however they are more related to the quality control failures of the mass manufacturing activities. Often they are wrongly used to limit the use of TM. In reality, such a QC failure should not be considered as a general negative notion to create a bias against TM. We certainly need effective QC and regulation of herbal medicines, without limiting public access to these preparations and ensuring public interest and constituting restrictive trade practice.

Lawn

The lawn is a plot of closely mowed grasses. It is composed of thousands of individual plants crowded and forced into a very unnatural growth habit. It is an integral part of the garden. It is basically an area of land planted between gardens covered with grass and other low lying plants.

Lawn is one of the most important features of a garden. A well kept lawn makes a garden look extremely beautiful. It looks like a beautiful green carpet amidst colourful flowers in a garden. Lawn can be called as turf, pitch, field or green depending upon its plantation and usage. Selection of lawn grass depends upon it usage and its season of plantation. Though a well maintained lawn requires a little of patience and care, the final results are always very beautiful and soothing. Scientific reports say that lawns reduce energy consumption through it soothing effects and the green grass prevents soil erosion as well as cut down noise pollution in the urban areas.

Modern fruit and vegetable processing industry is by and large, employing sophisticated machinery and equipment and efficient technique of production. There is still a scope for expansion of the industry by developing and exporting value-added products and on more foreign exchange. The choice of products to be manufactured will depend on the readily availability of raw materials in the area where the Processing Unit is supposed to be set up and the consumer preference in the neighbouring market. Preservation of food has to be established in the developing countries for other reasons also such as to generate both rural and urban employment, improve farmers nutrition by allowing them to consume their own processed fruits and vegetables during the off- season, stimulate agricultural production by obtaining marketable products, reduction of imports and meeting of export demand and to develop new value-added products. The food processing industry has now become more of a necessity than being a luxury. It plays an important role in the conservation and better utilisation of fruits and vegetables. To avoid the glut and utilise the surplus during the season, it is necessary to employ modern methods to extend storage life for better distribution and processing techniques to preserve them for utilisation in the off season on both large scale and small scale. Fruit and vegetable processing was first started in an organised manner in 1857, mainly to make pickles and chutneys with a view to meeting the export requirement.
Mango Processing Technologies
Mangoes are processed at two stages of maturity. Green fruit is used to make chutney, pickles, curries and dehydrated products. The green fruit should be freshly picked from the tree. Fruit that is bruised, damaged, or that has prematurely fallen to the ground should not be used.

Introduction
 
Intellectual property is a cluster of legally recognized rights associated with innovation and creativity, the works of the mind, as against physical products, land and other tangible resources. Even though it is intangible, intellectual property (IP) is often recognized as personal property, to be sold and traded like other forms of property. Under intellectual property law, owners are granted certain exclusive rights to various markets, machines, musical, literary, and artistic works; discoveries and inventions; and applications. But national laws normally don’t define ‘intellectual property’ as a single property right. Instead, ‘intellectual property’ is used as a convenient general term describing a range of distinct legal rights, relating to literary, artistic and scientific works; performances of performing artists; phonograms, and broadcasts; inventions in all fields of human endeavour; scientific discoveries; industrial designs; trademarks, service marks, and commercial names and designations; protection against unfair competition and all other rights resulting from intellectual activity in the industrial, scientific, literary or artistic fields.

Any substance or mixture of substances intended through physiological action, for accelerating or retarding the rate of growth or maturation, or otherwise altering the behaviour of plants or the produce thereof are known as plant growth regulators. It does not include plant nutrients, trace elements, nutritional chemicals, plant inoculants and soil amendments.

Plant hormones are organic compounds other than nutrients, synthesize by plants and regulate plant growth and development. They are active in very low concentrations, produced in certain parts of the plants and are usually transported to other parts where they elicit specific biochemical, physiological and morphological responses. They are also active in tissues where they are produced. The term plant growth regulator is usually used to denote a synthetic plant hormone, but most of the synthetic compounds with structures similar to those of the natural hormones have also been called hormones. For instance, the synthetic cytokinin, kinetin is considered a hormone.