eChapters

Yogurt is a fermented milk product that contains the characteristic bacterial cultures such as Lactobacillus bulgaricus and Streptococcus thermophilus. All yogurts must contain at least 8.25% solids not fat.

17.1. Introduction

Tea (Camellia sinensis L), coffee (Coffea arabica L.) and rubber (Hevea brasiliensis) are known as estate crops or conventional plantation crops. These plantation crops are perennial in nature and cultivation of these crops generates considerable employment opportunities during on farm and off farm processing activities. The plantation crops are high value industrial crops contributing about 25% of AGDP. India is a largest consumer of tea accounts for 22% global tea consumption and also accounts for one-fifth of global tea area. Indian coffee industry also have prime place among plantation crops and also contributing 4% coffee to global market. Similarly, rubber plantations also provides basic raw material to toys, balloon, tyres, seed oil cake and rubber wood factory. The plantation crops along with main processed products also produce large quantity of biomass like husk, coir dust, coffee husk, tea waste, shedding etc which can effectively used to reduce nutrient requirements of crops. Parchment coffee prepared by using the wet method is generally favoured by the market. Cherry coffee, due to its very nature of preparation and longer contact with the mucilage and fruit skin, is usually associated with a characteristic fermenting flavour.

Processing of fruits  and vegetables into various products which could be preserved for a long time and add to value of product using proper cost effective technology will be a viable tool for improving   economic status of  farmer as well as our country. Modern methods of fruit and vegetable preservation are  broadly classified as follows:

Introduction

Consumers are nowadays very much concerned about the food they purchase and consume. Consumer wants the food containing antioxidant properties or can say functional food in safe and stable forms, so that the availability of daily requirements of functional food ingredient must be ensured for normal growth and development of the body. The functional food that can provide a health benefit such as increased dietary fibre, vitamins or minerals to the body. The incorporation of antioxidant compounds acts as an efficient way to fight against reactive oxygen species (ROS) generated in our body. As it is already known that the ROS causes oxidative stress and acts as a main trigger for different life threatening chronic diseases like cancer, diabetes, cardiovascular disease, aging etc. Therefore, seeing the consumers’ demand for value added products with bioactive ingredients, all small and large scale food industries are taking initiatives to process different types of food (fruits, vegetables, dairy, sea food, animal, microbial products etc.) to extract and purify its active fraction of functional ingredients to valorize different value added products. Functional ingredients may also be derived from different food wastes generated during processing of food. This practice provides additional economic benefits to food businesses. Food industries are also giving importance to different processing methods to extract high quality of functional food ingredients in large quantity because processing method affects the concentration of extracted bioactive compounds. The simple addition of functional ingredients may cause an unwanted and negative change of sensory and texture of food. Therefore, using novel processing technologies such as microencapsulation, the negative changes could be minimized or avoided because these technologies could prevent the inactivation of bioactive ingredients.

Abstract

The objectives of the study is to help to create self-employment and provide proper information for different conventional milk based products. Traditional dairy foods have always played a crucial role in preservation of precious milk nutrients and promotion of its use among masses. The demand for milk and milk products is increasing with increasing of world's population. To meet these needs, high-end technology is needed for emerging the capability of milk production and preserving it by producing high quality milk products. The dairy industry is highly localized owing to perishable nature of milk products. Approximately 50% of the total milk produced in India has been projected to be processed into a variety of conventional milk products, such as khoa, chhena, paneer, dahi, ghee, kalakand and a wide range of sweets in rural areas mostly by the rural citizens. Therefore, setting up a milk-based food production system and updating conventional technologies to manage milk-based products on a commercial scale is very important.

Processing

On arrival in the laboratory, the specimens are processed immediately or refrigerated until processed. For inoculation into animal/cell culture/embryonated eggs (EE), swabs are shaken in fluid medium, faeces are dispersed in fluid medium and tissue specimens are homogenized in a high speed blender/pestle and mortar with the help of an abrasive like powdered glass or sand. Good quality hard sand should be properly washed in distilled water, treated with HCl, washed thoroughly, dried and sterilized before use. Generally the infective tissue is homogenized in a few ml of buffer usually having a pH of 7.2 to 7.3 to make about 10% tissue suspension. The suspension is centrifuged at about 1000g for 10-15 minutes to sediment the tissue debris and coarse materials.

5.1 Introduction
The process of milk processing entails the transformation of liquid milk into dairy products, including pasteurised liquid milk, yoghurt, butter, cheese, and ghee. The following are the rationales for processing: There are numerous benefits to processing milk, including the ability to access distant markets, the extension of the product’s storage life, and the attraction of higher prices because of its enhanced transportability. Furthermore, processed products are less cumbersome and lighter, which facilitates transportation. The refining of milk improves its quality and hygienic safety, enabling the production of a variety of milk products, including cheese and liquid milk, to satisfy the diverse needs of consumers. Additionally, the processing industry contributes to economic development by creating employment. Small-scale processors are capable of producing a wide range of dairy products. Before determining which dairy products the group will produce, it is recommended that a comprehensive market/feasibility study be conducted. Milk products can be processed in the manner depicted in the image.

FRUIT TOFFEES

Fruit toffees can be prepared from different fruits like apricot, plum, apple and other fruits. Concentrate the fruit pulp to about half of its volume by cooking with sugar and other ingredients. Milk powder should be added in the form of paste. Heavy stirring is required till it hardens enough on cooling.

16.1. Introduction

Plantation crops are high value industrial crops grown in the tropics play a vital role in agricultural economy and export trade of developing countries. Plantation crops have great potential for utilization of waste land like rainfed dry land, hilly, arid and coastal areas to provide nutritional security, earn foreign exchange and to ensure livelihood security. The major plantation crops grown in India are tea (Camellia sinensis L), coffee (Coffea arabica L.), rubber (Hevea brasiliensis), coconut (Cocos nucifera), arecanut (Areca catechu L.), oilpalm (Elaeis guinensis), cashewnut (Anacardium occidentale L.), cocoa (Theobroma cacao L.) and cardamom (Elettaria cardamomum). India is the leading producer of most of these plantation crops. Among all fruit crops, the processing plays an important role in plantation crops as they are generally consumed only after processing. In addition to primary products which are exported largely, some by-products from these crops also have industrial as well as commercial uses. Coconut, arecanut, cashewnut, black pepper and cardamom are known as small holder plantations whereas, crops like rubber, tea and coffee are known as estate crops or conventional plantation crop. Coir, wood and shell from coconut, leaf sheath in arecanut, cashew nut shell liquid (CNSL) and feni from cashew are some of by-products with a great impact and demand in the market.

Introduction
Plantation crops are high-value industrial crops grown in the tropics and coastal areas. They have great potential for utilization of wasteland like rainfed dry land, hilly, arid, and coastal areas to provide nutritional security; earn foreign exchange, and ensure livelihood security. The major plantation crops grown in India are tea (Camellia sinensis L), coffee (Coffea arabica L.), rubber (Havea brasiliensis), coconut (Cocos nucifera), areca nut (Areca catechu L.), oil palm (Elaeis guinensis), cashew nut (Anacardium occidentale L.) and cocoa (Theobroma cacao L.). India is the leading producer of most of
these plantation crops. Among all fruit crops, processing plays an important role in plantation crops as they are generally consumed only after processing. In addition to primary products, some by-products from these crops also have various commercial uses. Coconut, areca nut, cashew nut, black pepper, and cardamom are known as smallholder plantations whereas, crops like rubber, tea, and coffee are known as estate crops or conventional plantation crops. Processing aspects of some of these crops are discussed here:

44.1. Aim

To conduct practical on processing of tea and coffee.

44.2. Theory

Tea is an evergreen woody perennial grown in many Asian countries including China, Japan, Java, Sumatra and India. The plant produces dark green, small shiny leaves with white blossom. In post harvest and manufacturing practices for tea, only mechanical and physical processes are allowed with natural fermentation. It can be manufactured by orthodox, CTC (crush, tear and curl) processing.

Coffee is an important beverage used all over the world. Brazil and Columbia are the largest coffee producers in the world. Coffee is harvested in one of two ways; strip picking (entire crop is harvested at one time either by machine or by hand); selective picking (only the ripe berries are picked individually by hand) during dry season when cherries are bright red, glossy and firm. After picking, the coffee can be prepared either by dry method which produces natural coffee or by wet method which produces washed coffee.

Aim of the Experiment: The composite soil samples, collected, are air-dried and processed before analysis in the laboratory.

The processing of wool encompasses multiple stages that convert raw fleece into functional fabric or yarn. Each phase in the wool processing procedure is vital in influencing the ultimate quality and appropriateness of the wool product for diverse uses. Below is a concise overview of the steps involved in wool processing:
1. Shearing or pulling
2. Skirting
3. Washing or scouring
4. Carding
5. Combing
6. Spinning
7. Dyeing
8. Weaving and knitting
9. Finishing
10. Packaging

The potato (Solanum tuberosum L.) is one of the four most important food crops of the world, the other three being rice, wheat and maize. It is a high yielding and nutritive crop and produces highest dry matter, carbohydrates, edible protein, minerals and vitamin C and B per unit of area and time. In view of the shrinking cultivable land area and increasing population of India, the potato has a high potential to solve the problems of hunger and malnutrition in our country. But, potato is a perishable commodity and its harvest time (February/March) in Indo-Gangetic plains (which account for nearly 87% of the country’s potato production) coincides with steep rise in ambient temperatures. From April onwards, temperatures start shooting up and the produce has either to be consumed within a short period of time or is required to be preserved in the cold stores. Due to inadequate, expensive and unevenly distributed refrigerated storage facilities in the country, there have been frequent gluts in the market causing substantial economic losses to farmers and wastage of precious food. Such gluts occur every 3 to 5 years. The glut years are followed by a reduction in potato area and production leading to high potato prices in alternate years which again encourage farmers to increase potato area in subsequent years resulting again in a glut situation and price crashes. This boom and bust cycle has thus continued for long (Pandey et al., 2009).

Introduction

Agricultural production is necessary to fulfil nutritional requirements for human populations and global food security. The agricultural sector also forms the economic backbone of many low-income countries in which millions of farmers are employed (Anushka et al, 2022). However, managing agricultural production to achieve multiple objectives of providing food, supporting livelihoods and protecting biodiversity and forests is a challenge especially in tropical, low-income countries (Anushka et al, 2022). Usually, the growth in global agricultural production is largely driven by commercial and export oriented commodities. One such agricultural commodity that has high global demand is cashew (Anacardium occidentale L.). Cashew is presently cultivated in 33 countries including India in the world. Global land area for cashew cultivation between 1980 and 2018 has seen an eleven-fold increase from 526,250 ha to 5,972,724 ha (Anushka et al, 2022).

Coconut, arecanut and palmyrah, which hold significant cultural and historical importance in India, have been the primary focus of cultivation efforts. Cocoa, a relatively recent addition to India, serves as a companion crop to coconut and arecanut, contributing to the economic well-being of farmers nationwide. However, the current situation emphasizes the crucial role of value addition and product diversification in stabilizing prices. Despite the initial stages of value addition in India’s palm crops, recent innovations and established value chains have the potential to empower farmers as entrepreneurs, thereby augmenting their income. Moreover, the value-added products from these palms have enormous export potential. This chapter explores the advancements in value-added products and the diversification of coconut, arecanut, palmyrah, and cocoa, providing insights into opportunities for cottage or small-scale industries.

Oil palm is a major source of edible oil globally and plays a crucial role in meeting the dietary needs of millions of people. India has been focusing on expanding oil palm cultivation to reduce its dependence on imported edible oils. Oil palm can yield high oil compared to other vegetable oils. Palm oil production rate depends on post-harvest handling, and milling and extraction processes. After harvesting, some quality changes occur in oil palm fresh fruit bunches which leads to reduce the oil quantity and quality. With proper handling of post-harvest bunches and adapting best extraction methods can increase the oil yield and quality. Palm oil alone has the potential to make India sustainable in edible oil production.

Introduction

Oil palm (Elaesis guineensis Jacq.) originated in the tropical rain forest of western Africa and is now being cultivated in more than 45 countries around the world especially tropical regions i.e., Malaysia, Indonesia, Thailand, Nigeria, Columbia, and Ghana. This crop was introduced in India during the early 1990s, to meet the demand and to attain sustainable edible oil production in India due to its high oil-yielding capacity compared to other vegetable oil crops. It produces two distinct oils, i.e., palm oil and palm kernel oil. Palm oil is derived from fleshy mesocarp of the fruit and palm kernel oil obtained from the kernel of stony seed.

India is bestowed with varied climatic conditions and a variety of horticultural crops are produced. It is estimated that 20-30% of the produce is lost before consumption because of various reasons including improper storage and this is where the need of processing for preservation arises. There are various ways of preserving the produce and various ways to process it.

Preservation is defined as methods of extending the shelf life of the produce in its original form or in a different usable form. The basic principle of preservation involves strategies which aim at reducing the spoilage. The horticulture produce is spoiled by microbial infection or infestation. Prevention of microbial damage can be achieved by keeping the produce away from microbes, by removing the microbes, obstructing the proliferation and by killing the microbes. Infestation in the harvested fruits may lead to other microbial infection and spoilage due to rotting.

Post Harvest Technology

Introduction

The demand for edible oil has grown with the increase in world population. Improvement in living standards have made the population increase the consumption of oils and fats. It also has become more discriminating with respect to the oil quality. Oil producers, have to meet the increasing demand for edible oil, and improve product quality and variety as these have become major factors in the market-place.

Agriculture has been tuned through selective seed breeding and improved crop production practices to take care of the increasing demand. The emphasis has been to improve yield per hectare or tolerance to climatic variations. The ability to modify seed through traditional breeding and biotechnological approaches promises a revolution in agriculture. Using various approaches, not only quantitative improvement but also the qualitative changes especially fatty acid changes have been brought about. Customer support is needed for the genetically modified crops. A lot of controversy exists at present in accepting genetically modified crops. This aspect has to be studied in depth and needs to be resolved at the appropriate level as quickly as possible.

A prerequisite for the production of top quality oils and meals is a high quality raw material. Some attempts have been made to improve the physical characteristics of oils and meals through genetic, agronomic as well as through post production handling and processing technologies. The harvested quality grain should not be damaged during transportation, storage and processing. To produce a crude oil, the industry uses a number of processing steps, the application of which depends on the type of seed and the scale of the operation.

The purpose of Post Harvest Technology of oilseeds is to recover the maximum quantity of good quality oil and also make the deoiled cake useful as food or feed. Oil in oilseeds is located in spherosomes, which are the oil bodies (Salunkhe et al, 1992). When seeds are broken into small particles and the cells get ruptured the oil becomes available and is easily extracted. From the time of harvest, till the seeds are fed to the oil extracting machines, various processes are carried out to make good quality of oil available to the consumer apart from providing remunerative prices to the producer, namely, the farmer. The various steps involved in the oil extraction are proper harvest, drying, storage, seed cleaning, heat treatment and different types of machinery. The basic objective of every step in the post harvest technology is to minimize losses and to sustain or improve the quality of the product.

Procurement is acquisition of goods and services.
Procurement includes:
• Planning the acquisition
• Planning the contracting
• Requesting proposals 
• Selecting a vendor
• Administering the contract
• Closing the contract 

Planning the acquisition

It is based on goals of an enterprise acquisition varies – depends on what, when and where to produce. Based on these factors acquisition requirements are arrived.