eChapters

Crop Domestication

Domestication can be loosely defined as the process of bringing of a wild species under the management of man. Domestication is the process by which genetic changes (or shifts) in wild plants are brought about through a selection process imposed by humans. Because of the role of humans, the process results in characteristics that are beneficial to humans but some that would be disadvantageous for plants in their natural habitats. It is an evolutionary process in which selection (both natural (frost tolerance) and artificial (large attractive fruits)) operates to change plants genetically, morphologically, and physiologically. 

Introduction

For capacity building of farming community, training plays a vital role. It helps in enriching the knowledge along with enhancement of essential skill required in performing certain practices in a specific crop cultivation. The skills required by a coconut cultivator need to be supplemented with additional skills in order to increase the yield of nuts. Government provide better support to the coconut growing farmers to improve their income, to reduce the risk involved in cultivation, implementation of quality agricultural practices and f inally enhancing the income of coconut grower in business mode. Training is a source of information, advice and influence in the decision making process. Training helps in enhancement of knowledge, improvement of skill, interaction with experts and to build confidence. Keeping this in view, the present study was conducted to know the training need areas of coconut growers in Gop block of Puri district of the state of Odisha.

Microclimate under irrigated conditions and dryland conditions can differ significantly due to variations in water availability, which influences several environmental parameters such as temperature, humidity, soil moisture, and vegetation cover. The crops are grown both under irrigated and dryland / rainfed situations. The major difference between irrigated and dryland conditions is availability of water. In irrigated areas, the crops are regularly provided with water through irrigation at regular intervals. Under dryland situations, the water availability to the crops depends upon the rainfall and/or stored soil moisture. Under irrigated situations, there are two different possibilities as indicated below:
• vast stretch of irrigated areas
• isolated pockets of irrigated areas in predominantly dry areas. In dryland areas the following possibilities exist:
• humid and moist sub-humid areas where predominantly rice based cropping systems are adopted during rainy season
• per-humid areas where plantation crops and rice grown during rainy season.
• dry sub-humid areas with rice based cropping systems in low lands and finger millet, maize based cropping systems in upland areas
• semi-arid regions where kharif crops are grown during rainy season.
• rabi-crops grown under conserved moisture conditions during post rainy season.
• arid regions where pearl millet based cropping system are practiced during rainy season.
• hill agriculture
The microclimatic conditions are likely to vary between irrigated and rainfed conditions due to different agro-ecological settings. The comparative analyses of microclimatic variation under both conditions are given below:

Reliability aims at assessing the accuracy and consistency of whatsoever the measuring instrument measures irrespective of whether we are measuring what we are supposed to measure or not. Whereas the validity emphasises on the question “are we measuring what we were supposed to measure?”

To clarify the difference between reliability and validity, let us take an example of instruments that measure colour intensity. Assume, an expert develops two separate instruments X and Y to measure the intensity of green and red colour, respectively. But, the commercial manufacturer wrongly tags the red colour measuring instrument as X. When someone uses this wrongly tagged instrument for measuring the green colour intensity, whatever intensity values the instrument yields are reliable but not valid. It is so because the instrument is measuring red colour intensity accurately (hence data is reliable) but it is not measuring what it was supposed to measure –the green colour intensity (hence data is not valid).

Abstract

Wheat is unique among cereals because of its ability to form viscoelastic dough. Variety of products such as leavened and unleavened breads, pasta, cookies, and breakfast cereals are prepared using wheat. The viscoelastic property of dough is mainly due to the presence of gluten proteins viz., gliadins and glutenins. Variations among these proteins play a significant role in determining the quality of wheat. Although considerable studies have been carried out on quantity and quality of protein and their relation to bread quality, very little work has been reported on their relation with quality of Indian traditional products like chapati and tandoori roti. Results indicate that ratio between gliadins and glutenins are important in determining the chapati quality. It has been found that varieties having 5+10 HMW glutenin subunits with IBL/ IRS chromosomes are more suitable for the preparation of chapati and roti. This article is focused on the relation between protein and its subunit composition and the quality of chapatti and roti quality.

Training is a major manpower management function. No organization can afford not to train its employees, regardless of his previous education, training, and experience. He has to be introduced into the work environment of his new employer inducted and taught to perform his assigned tasks in a new milieu. Moreover, changing technology, increasing automation in offices and factories and in almost all institutions is bringing about redesigned or altered jobs. People are constantly being “trained” and retrained by the way their superiors and other employees associate them with work. 
Training is a part of management development and also a form of organizational development. The most effective managers are those who can best develop the human resources of an organization for the purpose of achieving organizational goals and objectives. If the employees perceive training as a means to achieve their personal goals at work, they will welcome such opportunities. Some essentials about training may be borne in mind and they are:

Introduction

‘Protected cultivation’ is a method of cultivation of plants or crops in artificial environment (Polyhouse/ Greenhouse/Glasshouse) to protect the plants or crops from the natural calamities viz. wind, hailstorm, excessive radiation, temperature extremes, insect-pests and diseases. For matching ever growing needs of human population in the country, it has become imperative to provide the not just cereals but also fruits, vegetables, flowers and other horticultural products to fulfill their requirements. In the present scenario of perpetual demand of horticultural produce in order to increase their production round the year and shrinking landholdings drastically, protected cultivation is the best alternative and drugery- less approach for using land and other resources more effeciently.Protected cultivation comprised of selection of crop and media, climate control,marketing, post harvest technology, plant protection and irrigation/ fertigation.

In India, states like Karnataka, Andra Pradesh, Maharashtra and Tamil Nadu are the best suited for protected cultivation of horticultural crops due to their pleasent climatic conditions. Apart from these states, Himachal Pradesh, Uttar Pradesh, Jammu and Kashmir, West Bengal, Delhi and Jharkhand are also fore runners in adopting protected cultivation. Protected cultivation is a key for sustainable production in the country due to its various ecological regions viz., Western Himalayan region, North eastern Himalayas, Eastern Plateau hill regions, Central Plateau hill regions, Western Plateau hill regions, Southern Plateau hill zone, East coast hill zone, West coast hill regions and Gujarat hill regions (Gupta et al., 2003). Control of light through polycover has become a significant part of horticulture technology because quality, intensity and duration of light is involved in many physiological processes of the plants. A plastic film or fibre glass covering over a green house acts like selective radiation filter which allows solar radiation to pass through but traps radiation emitted by the plants inside the greenhouse which is known as ‘Greenhouse effect’. Carbon dioxide released by the plants at night also trapped, this raises the level of CO₂ there by enhances the photosynthetic activity (Ahmed, 1996).

ABSTRACT

Genetic variability was assessed among twenty five distinct drumstick (Moringa oleifera Lam.) landraces using PCR based random amplified polymorphic DNA (RAPD) markers. Genomic DNA extracted from tender leaves was used for RAPD analysis. Thirty five primers were screened and based on the number of bands three primers were selected. The primers produced 34 bands, of which 58 % (20 bands) were polymorphic. The data were analysed using NTSYS pc 2.1 software. The similarity matrix constructed using Jaccard’s coefficient method was subjected to cluster analysis using UPGMA (Unweighted Pair Group Method with Arithmetic Mean) and dendrogram was generated. The pair wise coefficient values in the genetic similarity matrix among the landraces varied between 0.28 and 1.00. The dendrogram based on the matrix separated the landraces with distinct morphological characters and it was noted that the cluster formation was not fully in agreement with the geographical location. The study showed the use of RAPD markers in detecting genetic variability present among the drumstick landraces studied.

8.1 Introduction to Dictionary in Python

A dictionary is a collection which is unordered changeable and index. In python dictionaries are written within curly brackets, and they have keys and values. Means the dictionary contains two things first is the key and the second is the value.

8.1.1 Create and Print a Dictionary

Example

dict1={‘brand’:‘Suzuki’,‘model’:‘dzire’,‘year’:2020}

print(dict1)

Accessing items: you can access the items of a dictionary by referring to its key name, inside square brackets.

Example

Accessing items: there is also a method called get() for the same task.

dict1={‘brand’:‘Suzuki’,‘model’:‘dzire’,‘year’:2020}

print(dict1)

y=dict1.get(?model”)

print(y)

Abstract

This chapter examines how farm size affects farmers’ welfare. Large farm owners enjoy a higher standard of living than small farm owners, which motivates their children to continue farming. The nation’s scale economies also favor large farms. In India, farm size decreases with each generation due to inheritance rules. Farming does not provide enough income to ensure a decent standard of living, so the size shrinks as the number of dependents grows. These farms are not only small, but also scattered, making farming a low-paid profession.

Size of the farm influences the welfare of the farmers. Operators of large sized farms enioy better standard of living compared against their counterparts with small sized farms. Better standard of living in turn encourages their children to be in farming. This way the interest in farming makes the farmers to be committed to derive maximum production. Large farms further enjoy the scale economies as well. A country with this type of setting in agriculture regarding farm size marches ahead to produce larger quantity of farm products. In India, the law of inheritance brings down the size of farm operated by a farm family with every passing generation. Sub-division on one side reduces the size of farm but the size of holding is further reduced by fragmentation. With ever growing dependents in farming, the size of the farm had been dwindling over the years, as it is at present does not provide sufficient levels of income to ensure a reasonable standard of living. The size of farm that is operated by the farmer should doubly ensure this requirement. Apart from being small in size, these are scattered making the farming an unremunerative occupation.

Broadly and conceptually breeding methods can be classified into four groups. These are:

• Selection breeding
• Combination breeding
• Hybrid breeding
• Special breeding techniques

There are fluid transitions and similarities between the individual groups of breeding methods. Selection not only takes place in the group termed selection breeding but also in other groups. In breeding varieties by combination, new variation is generated by crossing genetically different parents followed by application of various selection methods and ultimately development of a new recombinant type pure-line. In hybrid breeding, inbred lines of different genetic constitution are produced by selfing, pair crossing and other methods and from these best lines are selected and new hybrids are developed. In addition, breeding methods can also be classified according to other criteria. For example, breeding methods have also been classified according to the manner of propagation of the varieties. These are:

1. In GAS normal adaption done on 3 stages.

2. In GAS alarm reaction is an physical response.

3. Resistance stage adaptation achieved under homeostasis.

4. In exaust unable to achieved homeostasis.

5. Study of disease and their causative agent is called as pathology.

6. Aeromonas salmonicida is an obligate pathogen.

7. Aeromonas hydrophilia is an opportunistic pathogen.

8. Inflammation occur due to stress.

9. 5 signs in inflammation are calor, ruber, tumour, dolore, et function leaso.

10. Inflammation response will occur following the release of pharma-codynamic amine.

Weather has profound influence on agriculture, which demands that the changes in weather conditions are regularly monitored. In qualitative terms, weather conditions are often expressed on the basis of final condition created by interaction of different components. For example, too hot, too cold, sunny or cloudy, humid, dry weather conditions refer to specific atmospheric conditions but are least useful in analyzing the impact of weather on agriculture.
 
The measurements taken at a weather station can include any number of atmospheric observables. The WMO has laid down specifications, procedures and practices in respect of various meteorological matters such as instruments, observations, telecommunications, processing of data, analysis etc.

Genus : Physalis 
Species : peruviana L.
Family : Solanaceae
Chromosome No. : 2n = 28, 48

Physalis (Greek for Bladder, as the thin calyx enlarges and encloses the fruit). Fruit is called as husk tomato or ground cherry. Is  a plant of warm and temperate  regions and is mostly cultivated for its edible fruit  which is sub acidic in taste and  the flavour resembles that of tomato hence the name tree tomato or husk tomato. The genus comprises  nearly 75 species mostly of American origin, however few species are also found in Asia and Europe. The species peruviana and pubescens are cultivated for their edible fruit whereas P. alkekengi Linn and  P Franchetii  Hort., are highly valued for their shiny large red calices. Plant is a very old garden plant grown mainly for its brilliantly coloured calices, is perennial, grows zigzag with soft pubescence  on stems. Leaves ovate, base broad and angular, petiole spreading at top. Flowers whitish with yellow anthers.

The genus Arcanobacterium was first described to include the bacteria originally isolated as Corynebacterium haemolyticum from American wounded soldiers (Collins et al., 1982). The bacteria had different cell wall and lipid composition in comparison to the other members of the genus Corynebacterium. So the new genus Arcanobacterium was created.

Properties of genus

1.         Morphology : Arcanobacterium pyogenes is a Gram positive, non-motile, non- spore forming, short, rod-shaped bacterium, measuring 0.5µm by 2 µm. They are non-capsulated and do not contain any metachromatic granule. Initially (during first 18 hour of growth) the bacterial cells may show characteristic ‘V’-arrangement like Corynebacterium, latter as the growth proceeds, the organisms become granular and segmented so that they resemble small and irregular cocci (whereas, A. hippocoleae and A. pluranimalium appear to be less coccoid). The cell wall is devoid of mycolic acid, arabinogalactan unlike ‘coryneform’ bacterial group (Mycobacterium, Corynebacterium, Rhodococcus, Nocardia). Cell wall peptidoglycan is composed of N-acetyl muramic acid, lysine. Being gram positive in nature, some strains exceptionally possess fimbriae.

ABSTRACT

There is a wide variability in the contents of the commercially important chemical compounds of Centella asiatica depending on the source / ecotypes of the plants. The glycosides found in Indian plants include brahmoside, brahminoside and minor amounts of asiaticosides, which vary in their relative contents depending on the ecotypes. An RAPD marker assisted study of ten accessions, collected from different geographical locations of Kerala, viz., Parumala (Kottayam District), Kottayam, Nagercoil (Tamil Nadu), Mananthala (Trivandrum District), Vlathankara (Trivandrum District), Ponmudi (High range, Trivandrum District), Angamaly (Ernakulam District), Punalur (Kollam district), Pattambi (Palakkad district) and Calicut, was conducted. DNA amplification of the accessions was studied using forty decamer primers, involving 43 cycles. Based on the number of bands four primers were selected. The least similarity coefficient of 0.71 was shown by the Pattambi accession, which formed a separate cluster with all other accessions. Nagercoil and Ponmudi accessions showed the highest similarity coefficient of 0.88 with each other.

IBD is an acute, contagious, viral disease of young chickens characterized by diarrhoea, vent pecking, trembling, incoordination, inflammation followed by atrophy of the bursa of Fabricius (BF) and by a variable degree of immunosuppression.

In the USA the disease was reported in Gumboro, Delaware in 1962, hence the name. The occurrence is worldwide.

The variety of greenhouses and greenhouse material, equipment and accessories are so many. However, there are certain basic materials that essential in almost all types of green houses. These are

Structural framing materials

Such materialsinclude low maintenance non-heat conducting timber; strong and durable galvanized steel; or light, low-maintenance and sturdy aluminium alloys. Though plastic pipe frames are usable, they are not very strong to withstand snow load or strong wind sheering forces. What one should choose as the framing material would be determined by the material one wishes to use as glazing, his budget and the permanence of the structure one desires. Aluminium is a popular material for greenhouse framework because it is relatively lightweight, rustproof, affordable and easy to assemble. The downside is that it is not a good insulating material and in very cold weather, heat loss from the metal frame could inflate your heating bill. Also, you would need to look for sturdy frames if your greenhouse is located in an area that experiences high winds. Condensation could also occur on an aluminium frame. Wooden structural frameworks for garden greenhouses are also a popular choice for its aesthetic value, natural feel and the ’warmth’ it exudes. It is an easy material to work with especially if you are not using a greenhouse kit for building. Some greenhouse owners would settle for nothing else as they believe it is the only material that complements the natural beauty of plants inside the greenhouse! Wood is a good insulating material so it will not allow heat loss in cold weather. Reinforced wood has superior strength and has an excellent load bearing capacity. Being a natural material, it has the potential to develop mildew or disease and offer a haven to tiny pests. So, when you choose wood to build the framework of your greenhouse, be sure that you pick a high quality hardy wood such as redwood, cypress or cedar. Also, treat wood with non-hazardous chemicals so that your plants are not adversely affected. The preservatives used for wooden greenhouse frames should be pressure treated, salt type or copper naphthenate. Copper naphthenate is a general use preservative used for pressure treating utility poles and timber. It is known to be very effective in preventing mould, mildew and dry rot. It works very well against wood-damaging fungi and insect pests. Pentachlorophenol is a restricted use wood preservative and is toxic to plants and humans. It is not available to the general public and poles or timber treated with it are not suitable for use in a greenhouse. PVC pipe can also be used as support for small greenhouses that are to be covered with polyethylene, but PVC requires additional support to withstand strong winds. Being flexible, PVC can be used particularly well in hoop houses. Though it has the advantage of offering insulation and, if UV treated, are long-lasting, they are not good at bearing the load of hanging baskets and shelving to any appreciable degree. PVC that is treated to be resistant to ultraviolet radiation is also known as UPVC.

Abstract

This chapter explores the production function, which shows how output can be maximized. Various types of production functions are used in agriculture, such as Linear, Quadratic, Cobb-Douglas, Spillman, Transcendental, etc.

Random design: In a random design, the study population groups as well as the experimental treatments are not predetermined, but randomly assigned to become controlling or experimental groups. Random assignment in experiments means that any individual or unit of the study, the population has an equal and independent chance of becoming a part of the experimental or control group or, in the case of multiple treatment modalities; any treatment has an equal and independent chance of being assigned to any of the population
groups.