eChapters

8.1 The purpose of erosion research

The need for research

A soil conservation programme needs to be based on factual information about rates and quantities of erosion. For example some land obviously needs to be protected by mechanical works such as channel terraces, some land equally obviously does not need any protection, and a great deal of land lies somewhere between the two extremes. At some point the terraces become unnecessary or uneconomic, but a logical decision on where to draw the line can only be made if data are available on how much soil erosion is occurring and how much it would be reduced by terraces. Similarly, the effect of channel terraces should be compared with the effect of alternative measures, and the effect should also be measured on the different soils and crops which are likely to be encountered.

Nowadays there are excellent opportunities for research workers to exchange the results of their work. The national and iniernational journals are packed with accounts and results of research reports in their proceedings (as listed in Further reading). Some of the reported research results can be usefully applied in countries other than where the research was done, but care is required in any transfer of technology. If the local conditions of soil, climate, or land use, are different, the results may not apply. However, research in other situations can often serve as a pilot trial to show which factors should be studied locally. Even when local conditions are so different that the results do not apply at all, the techniques and apparatus developed by other workers can still be helpful.

From the earliest time, man had to conserve and preserve his food, so that surplus at harvest following a successful crop can be stored for use throughout the year. Prime agricultural products in general and more so with fruits and vegetables which are being processed world wide or preserved to a more stable form so that they can withstand transport, handling and storage over a long period. As civilization developed, man learnt to preserve fruit and vegetable products with salt, spices and by drying , smoking or cooling which could extend their shelf life. Later by experience, he learnt that by protecting it from environmental factors such as air, moisture and light, the shelf life of these processed products could be further increased. He tried to keep them dry and covered to protect from insects and rodents. As with solid foods, primitive man experimented with beverages also. It is likely that the first beverage known to him after water was fruit juice. This undoubtedly led to the discovery of wines made from the fermented fruit juices. Later on, preservation methods and development of packaging materials underwent drastic changes.

8.1 Introduction

Solar energy can be directly converted into electrical energy. Energy conversion devices which are used to convert sun light into electricity by use of the photovoltaic effect are called solar cells. The advantages of solar cells are:

1.They are reliable, convenient and durable.

2.It is green, sustainable and pollution free technology.

3.Directly solar radiation can be converted into electricity (conversion of global solar light by flat plate photovoltaic).

4.Maintenance cost is quite low therefore suitable even in isolated and remote area, since no moving parts are involved.

5.Solar cells are quite compatible with almost all environments, respond instantaneously with solar radiation.

6.Considerable expected lifetime i.e. 20 years or even more.

Cardiac ultrasound is also known as echocardiography and it has a very important place in the diagnosis of cardiac diseases of the humans as well as animals. Echocardiography is an imaging of the heart using ultrasound. The diagnosis of congenital heart diseases, shunts, complex malformations, valvular heart diseases, different cardiomyopathies, endocarditis, pericardial effusion, cor pulmonale and cardiac tumours has been possible by cardiac ultra ultrasound that was otherwise difficult.

Introduction

In present times aquaculture is being practiced using both conventional or non-conventional methods with considerable variations. Aquaculture can be termed as – extensive, semi-intensive and intensive based on operations and involvements. An increase in the intensity of aquaculture requires an increase in capital as well as operational costs.

Here we will examine the three main levels of aquaculture used in various habitats and later consider the conventional methods of aquaculture.

Different Levels of Aquaculture

Fish culture practices can be classified into three different kinds or levels on the basis of the intensity of aquaculture in terms of capital as well as operational costs. The chances of crop failure often increase with increasing intensity of aquaculture, which may involve: 

5.1 Afghanistan Overview of the Agri-Food Economy Agriculture is a vital sector in Afghanistan, contributing around 25% to national GDP and employing nearly 60% of the workforce (World Bank, 2023). The country’s agro-climatic diversity enables the cultivation of staple crops such as wheat, along with high-value horticultural products like pomegranates, grapes, almonds, and apricots (FAO Afghanistan, 2022). Despite this potential, the sector is highly vulnerable due to climatic extremes, institutional fragility, and limited infrastructure. Key Challenges • Conflict-related Disruptions: Persistent conflict and political instability have disrupted agricultural activities and supply chain networks, undermining both domestic

Papaya is one of the fruit crops grown both commercially as well as a backyard crop. Papaya was mainly a backyard crop till recently. It emerged as a main commercial crop during the last decade, because of the high nutritive value. It is a rich source of Vitamin A (2020 I.U), Vitamin B1 (40 mg), Vitamin C (46mg), protein (0.5%) and mineral matters (0.4%). Ripe papaya is a favourite breakfast and dessert fruit available yearround. It is used for making fruit salads, refreshing drinks, jams, jelly, marmalade, candies and crystallized fruits. Green fruits are pickled or cooked as vegetable. Carpine, an alkaloid present in papaya, can be used as a heart depressant, amoebicide and diuretic. It is also grown for the extraction of papain, a proteolytic enzyme present in the latex, collected mainly from the green fruit. In 1875, T. P. Lucas, a British physician discovered the medicinal value of papaya and started a hospital in Brisbane, to treat patients solely with papaya. The people in Papua New Guinea use papaya for the skin and to treat rashes or sunburn or, with repeated applications, to remove the brown spots of aging. They also say that if you put papaya into the compost pile, they grow especially large! Natives in the Pacific Islands use all parts of the papaya tree for medicinal purposes — leaves, skin, seeds, bark, roots, flowers and of course, the fruit. South American women massage their breasts with thin slices of green papaya to stimulate the milk glands. Eating the fruit provides energy and nutrients for both herself and the baby. Papaya bark is used as a toothache remedy and the flowers in teas, to treat bronchial infections. For centuries, teas from the roots were used to expel parasites and to alleviate bleeding, kidney colic, and jaundice.

1.1 INTRODUCTION

This volume is concerned with the chemistry of soil processes. These are rather arbitrarily divided and discussed in the first part of this book in terms of mass flow and diffusion, precipitation, cation, anion and ligand exchange, adsorption, translocation of metals, and oxidation and reduction. The way in which these processes operate to determine the fate of different substances added to soils is described in the remaining part of the book. In this initial chapter an attempt is made to show how the individual chemical processes described later combine with physical and biological processes to give soils their ability to support plant life, and to accept the detritus of the world and to convert it to harmless constituents of the soil mass.

The last century has witnessed a global change in agricultural practices. From high dependency on external input agriculture, the world is now shifting towards low external input sustainable agriculture (LEISA). The history of dustbowl devastation in 1930s in America has put agricultural practices, tillage in particular, to question (Friedrich et al., 2012). Traditionally, tillage was believed to be a primary farm operation for preparing a good seedbed, nutrient mobilization, weed management, moisture availability, crop residue incorporation (Hobbs et al., 2008), thereby improving the overall soil health with increased production (Farooq et al., 2011a). The dust bowl devastation of 1930s gave rise to the concept of protecting soil by reducing tillage operation and maintaining ground cover, popularized as conservation tillage (Friedrich et al., 2012). Economic and ecological sufferings caused by the disastrous droughts in USA during 1930s drove the shift towards conservation agriculture (CA) (Haggblade and Tembo, 2003).

1.    Major difference between unleavened and leavened bakery products is

(a) Unleavened do not form cracks on surface

(b) Unleavened do not rise significantly during baking

(c) Leavened bakery products are not attractive

(d) Unleavened products are much more stable

2.    Unleavened bakery products contain small holes throughout the finished product because of

(a) Ingredients contain fats that may swell

(b) Air incorporation between cells

(c) Incomplete coalescence of mixed ingredients

(d) High temperature baking

For the sake of convenience ruminants are broadly divided into two categories as large ruminants and small ruminants. Large ruminants consist of cattle and buffaloes and small ruminants consist of goats and sheep. Sonography is becoming an important part of diagnostic modalities in ruminants also. Its major use in ruminants is in reproduction and lameness.

A scientific experiment is a planned research to obtain new facts or to confirm or refute the results of previous experiments. Research is usually conducted in a controlled environment to study the effect of one or more variables on observations. The objective of research may be to answer a question, verify a hypothesis, or estimate the effect of an independent variable on a dependent variable. After stating the research problem, we need to outline the methodology (or materials and methods) of the research, which includes developing an experimental design.

Scientific experiments are conducted to study the causal relationships between independent variable(s) and dependent variable(s). The researcher manipulates one or more independent variables and measures their effect on one or more dependent variables. Designing an experiment is planning an experiment. It is a complete sequence of steps taken before experimenting to ensure that appropriate data are obtained to perform a data analysis to get valid inferences about the problem. It must be seen that the data collected are relevant to the problem investigated. E.g., studying the effect of breed, age, feed, etc. on milk output. Here, the objects like breed, age, feed, etc. are called treatments. That is, any specific experimental conditions (like the addition of feed additives, new feed formula, etc.) applied to the experimental units are called treatments. The basic objects on which the experiment is done are called experimental units (E.g., a bird, an insect, an animal). However, the responses in all the experimental units receiving the same treatments may not be similar, due to the inherent differences in the experimental units, called experimental error, caused by extraneous factors.

‘Fungi’ including ‘mushrooms’ are ‘Thallophytes’, which do not possess chlorophyll and have been classified under the Kingdom - Myceteae. They do not have stems, roots and leaves and they lack a vascular conducting system as in the case of plants. They propagate by means of spores, either asexual or sexual. Though almost all the fungi are microscopic, the mushrooms are among the largest fungi and had attracted the attention Scientists and Naturalists of many countries dating back to centuries. The Greek word ‘mykes’, which means ‘cap’, was given to the mushrooms because of the ‘cap-like’ appearance of the pileus and the Greek word ‘Mycology’ (mykes = mushroom + logos = discourse) denotes the study of mushrooms. What we call mushrooms, are actually the sporocarps produced by several species of fungi, while the mycelium that produces them live in various types of substrata and obtain nourishment from them. Usually, the fleshy, macroscopic fruiting bodies or sporocarps produced by fungi belonging to Basidiomycetes and Ascomycetes are called ‘mushrooms’

The Romans attributed the appearance of mushrooms and truffles to lightning hurled by Jupiter to the earth. Even now in India and several other countries, people believe that mushrooms appear only after lightning and thunder. The Greeks believed mushrooms as ‘Food for the Gods’. The Romans supplemented mushrooms in the food of soldiers for strength and vitality. The much-priced mushrooms were supposed to be the food delicacy of the elite society of the Romans and Greeks in olden days. The Chinese consider mushrooms as a cure for many diseases and they believe that mushrooms increase the longevity. A number of medicines in all forms are prepared from mushrooms by the Chinese.

1. INTRODUCTION

Dielectric-barrier discharges (DBDs) also referred to as barrier discharges or silent discharges. DBDs have for a long time been regarded as the ozonizer discharge. In 1932 Buss observed that in a plane parallel gap with insulated electrodes air breakdown occurs in a number of individual tiny breakdown channels.^1,2 Recently, it was realised that plasma can be influenced, modelled and optimised for a given application through microdischarges. The most important characteristic of dielectric-barrier discharges is that non-equilibrium plasma conditions can be provided in a much simpler way than with other alternatives like low pressure discharges, fast pulsed high pressure discharges or electron beam injection. Moreover, the DBDs can breakdown most of the gases at about atmospheric pressure in a large number of independent current filaments or microdischarges. The dielectric barrier limits the amount of charge and energy deposited in a microdischarge and distributes the microdischarges over the entire electrode surface. When a dielectric-barrier discharge is operated in rare gases or a rare gas halogen mixture plasma conditions in a microdischarge channel are similar to those in pulsed excimer lasers. Consequently, each microdischarge can act as an intense source of ultraviolet (UV) or vacuum ultraviolet (VUV) radiation. The absorption coefficient of most substances increases at shorter wavelengths. So, in many cases the UV radiation is absorbed in a very thin surface layer. The xenon excimer lamp can induce photo-cleavage of water and oxygen.²

Group dynamics and formation represent fundamental processes in community mobilization that determine how individuals come together to form collective entities capable of achieving shared goals while building social capital and institutional capacity that can sustain long-term community development efforts. Understanding these processes provides essential insights into how communities can organize themselves effectively while creating groups that can navigate complex challenges and maintain cohesion through the inevitable difficulties and conflicts that arise during collective action initiatives. The science of group dynamics encompasses the complex social, psychological, and organizational factors that influence how groups form, develop, function, and achieve their objectives while building understanding of the internal processes that enable or constrain group effectiveness and sustainability. This knowledge has evolved through decades of research in social psychology, organizational behavior, and community

An animal disease is an economic process in the farming system, as it consumes a considerable amount of scarce economic resources that would have been otherwise productively utilized by the animals and results in negative benefits to society. Hence, while measuring the losses attributable to animal diseases, the manifestation of such losses and the factors influencing such losses may also be identified, which require modelling the ways by which the negative effects of the diseases are exhibited. A description of such models and their procedures is essential to understand the comprehensive effects of diseases. We will list and describe such models and tools in this chapter.

11.1 CORRELATION ANALYSIS

While simple descriptive statistical tools are adequate to estimate the economic effects of animal diseases, these tools cannot measure the nature and strength of the relationships between two or more variables. However, the statistical knowledge can effectively be used to understand Various statistical measures studied so far, like measures of central tendency and dispersion and skewness, relate to one variable only. However, there are many situations where there are several problems involving the use of two or more variables. Although correlation analysis is only a bivariate technique like t-test, ANOVA, and Chi square test, we will briefly see about correlation in this chapter, as it is also a part of multivariate analysis. The first step is to determine which bivariate analytical tool we need to adopt to test the study hypothesis.

Abstract

Inspired by the human eye to brain assessment process, computer vision technology has demonstrated its potential for monitoring and controlling of several operations in food industry. Computer vision technology is, therefore, applied extensively in food drying process for monitoring nutritional value and sensorial characteristics because of its promising characteristics such as reliable objectivity and repeatability. In this chapter, after providing a brief explanation of the computer vision technology and its prerequisites and principles, an example is given to elucidate how this technology is used for monitoring the visual attributes of foodstuffs during drying process. Overall, monitoring the visual properties of food products like size, shape, color, and texture in off-line mode are the most popular issues to fascinate researchers’ attention to apply the computer vision technology in food drying. Nevertheless, industrial applications of the computer vision technology for real-time monitoring and control of food drying facilities as final goals of its introduction in food drying industry seem to be limited. For future studies, it is suggested to apply this unique technology along with advanced soft computing methodologies for in-line monitoring and control of food drying process in order to achieve high quality dried products. Finally, outlooks and potential employment of this technology in food drying domain are discussed as well.

In old days, Statistics is considered as a method for collected numerical information. In general, Statistics deals with concepts, principles and methods dealing with collection, summarization, analysis and interpretation of data. Data means a collection of numerical facts. Data is plural and singular is datum. Generally there are two classifications for data, quantitative and qualitative. In the case of quantitative character the individuals are measured. While in the case of qualitative character, the individuals are distinguished by some quality. Data collected by the investigator for the purpose of the investigation are known as primary data. E.g., data obtained in a population census. Data collected by others for some other purpose and is used by the investigator are known as secondary data. E.g., Annual Reports, Official publication etc. The aggregate of all the observations pertaining to a character is called a population. Sample is a part of the population selected according to some definite rule. Usually the sample is used to make an inference about the population. In other words sample is a miniature of the population. The methods by which we analyze the data are called statistical methods. At the end of the enquiry, the investigators will naturally left with a large number of filled up schedules and a very efficient statistician couldn?t interpret anything from it unless it is classified and extracted. When we classify based on the quality like colour, sex, religion etc. which can?t measure directly, the classification is qualitative. But characteristics such as height, weight, length, time etc. can be easily measured using a scale. Such are called quantitative characteristics. The quantitative characteristics may be discrete or continuous. In the case of numerical values like number of petals in a flower, number of days in which rain occurred in a month etc. are whole numbers and are called discrete variables. If there may occur many values with in an interval, we call it as continuous variables.

The Mother Nature bestowed humanity with about 250,000 known plant species and perhaps the same or may be higher number of unknown plant species. Out of this treasure, 80,000 plant species are edible but human beings have probably exploited about 3,000 of these species for food and was cultivating about 150 on a commercial scale. However, largely human beings consumed only 20 different kinds of crops the world over and four of which viz. rice, wheat, maize and potato are supplying about 60 % of total calories. Under the circumstances, the food crops base even for well-known crops are shrinking at an alarming rate and in this process, many species have extincted from man’s food bowl. While doing so, we have considerably reduced the range of organic compounds that we now consume, thus making ourselves vulnerable to various stresses. Realising  importance of diverse food base in our life, thinking is going on among people of all lifestyles that more and more crops particularly those, which are known to be edible but have remained as “under-utilised crops”, should be brought into cultivation. This will ensure both food and nutritional security of people. Among these, tuber crops constitute an important crops group, which was sustaining food security much before agriculture came into existence.

Fruits and vegetables are one of the most consumable commodities globally and also serves as an important ingredient in human dietaries. There are a lot of different varieties of fruit and vegetable and the prices keep fluctuating of the products. The production of fruit and vegetables needs to be handled, processed, or utilized properly. The costs involved in preventing the losses are always cheaper than the cost of production, therefore processing receives higher attention in recent years. The fruits and vegetables processing industry was earlier highly unorganized but due to the increasing demand for processed
food, the industry has started attracting investors. India facilitates the fruits and vegetables processing industry in obtaining its primary resources; India is the second-largest producer of fruits and vegetables. The global fruit and vegetable processing market includes the global fruit & vegetable processing equipment market and processed fruits & vegetables market. There are different methods included in fruits and vegetable processing that helps in increasing the life of seasonal fruits and vegetables are canning, dehydration, freezing, pickling, etc.
Crystallized Fruits
Candied fruit when covered or coated with crystals of sugar, either by rolling in finely powdered sugar or by allowing sugar crystals to deposit on them from dense syrup are called crystallized fruits.