eChapters

Introduction

Agroforestry offers both adaptation and mitigation options to climate change especially for the poor rural communities in the developing world. It is now getting ample attention from different investors, scientists, policy makers and international bodies due to its multiple benefits to the environment; and remain an important component of sustainable land use in agricultural production. Agroforestry provides economic, environmental, and social security to the vulnerable communities who are dependent on agricultural production for their livelihoods, and on forest/ trees for their energy requirement. Agricultual production is vulnerable to climate change, and there is a need to cushion these communities to be less vulnerable to climate change, or natural hazards. The suitable, sustainable and smart method is agroforestry based agriculture which offer host of ecosystem services to cope the vagaries of climate change, particularly in rural areas.

Introduction

Adoption of green revolution technologies during 1960s led to increased productivity and elimination of acute foodgrain shortages in India. These technologies primarily involved growing of high-yielding dwarf varieties of rice and wheat, increased use of chemical fertilizers and other agrochemicals, and spread of irrigation facilities. This was also accompanied by other modern methods of cultivation, which included maximum tilling of land, virtually clean cultivation with complete removal of crop residues and other biomass from the field, fixed crop rotations mostly involving cereals, and elimination of fertility- restoring pulses and oilseed crops in the highly productive north-western plain zone of the country.

Introduction

Rainfed agro-ecosystems occupy a considerable place in Indian agriculture, covering 80 M ha in arid, semi-arid and sub-humid climatic zones; constituting nearly 57% of the net cultivated area. Rainfed areas contribute almost 100% of forest products, 84-87% of coarse-grain cereals and pulses, 80% of horticulture, 77% of oilseeds, 60% of cotton and 50% of fine cereals including rice, wheat, maize, sorghum etc (Srinivasarao et al., 2010; 2011). Rainfed regions support 60% of livestock, 40% of human population and contribute 40% of food grains and several special-attribute commodities such as seed spices, dyes, herbs, gums, etc. (Srinivasarao et al., 2011). It is estimated that even after achieving the full irrigation potential, barring for successful completion of river linking project, nearly 45 to 50% of the total cultivated area will remain dependent on rain. Undoubtedly, the rainfed agriculture would continue to occupy a prominent place in Indian agriculture for a long time to come (Venkateswarlu et al., 2011). Despite the progress made so far, rainfed agriculture in India encounters multiple risks and constraints relating to biophysical and socio-economic issues. Agricultural productivity in rainfed areas continues to remain low and unstable due to weather aberrations, nutrient disorder and poor socio-economic status of farmers.

India has shown to the world that with 2.4 % of the land and 4 % of the water resources available at the global level, it can provide the food security to its millions. A record production of almost 265 million tonnes in 2013-14 is a testimony to the strides taken in the field of agriculture. However, the agriculture sector faces many new challenges in the future and climate change (global warming) is perhaps the most formidable one.

The new emerging demands of the relatively more-affluent Indian population, particularly its middle class, coupled with a net cultivated area unlikely to exceed 143 Mha in 2050 as well as an estimated rainfed agriculture to cover around 45 % of the net sown area, are further compounded with the harsh reality that highly productive agricultural land is being continuously lost out to the industry and urban sectors. How will the country meet the target of 400 Mt of food grain production is the mute question, in a situation where natural resource base is continuously degrading and climate change with its attendant impact is adversely affecting the agricultural production system (Singh, 2014).

Introduction

Climate is the primary determinant of agricultural productivity. Plant systems, and hence crop yields, are influenced by many environmental factors such as moisture and temperature, may act either synergistically or antagonistically with other factors in determining yields (Waggoner, 1983). In the recent years, climatic change/variability is a biggest challenging factor that affects agriculture in India and elsewhere and concern has been expressed by world community regarding the potential effects of climate change on agricultural productivity. Climate change is expected to influence crop production, hydrologic balances, input supplies and other components of agricultural systems. Agricultural systems are managed ecosystems. The climate change induced atmospheric stress will be the primary cause of crop loss worldwide, reducing average yields for most major crop plants. Environmental stresses such as erratic and insufficient rainfall, extreme temperatures, salinity, alkalinity, acidity, heavy metal toxicity, oxidative stress and others limit yield and productivity of many cultivated crop plants. Drought, extreme temperatures and oxidative stress are interconnected and affect the water relations of a plant on the cellular as well as whole plant level causing specific as well as unspecific reactions (Beck et al., 2007). This leads to a series of morphological, physiological, biochemical and molecular changes that adversely affect plant growth and productivity (Wang et al., 2001).

Introduction

Agriculture is the mainstay of livelihood activity of about 70% of the state’s population. Madhya Pradesh is an agrarian state and the state’s economy is highly dependent on agriculture. Considering the sector’s sensitivity to climatic parameters it can be easily understood that the sector would be highly impacted by any change in these parameters.

Madhya Pradesh has a subtropical climate with three distinct seasons’ viz. winter from December to February, followed by summer season from March to May and rainy season extending from June to October. During winters the mean temperature remains around 10ºC and mean maximum temperature remains 25ºC and the minimum temperature goes down to 1°C in some regions. During summers, the mean minimum temperature is 22ºC and mean maximum is 38ºC. The maximum temperature during summer can go up to 48ºC, especially in May and June which are the hottest months.

Introduction

Increase in atmospheric carbondioxide (CO₂) and other green house gases viz. methane (CH₄), nitrous oxide (N₂O) and CFC (Chloro-Flouro- Carbon) due to fossil fuel burning, rapid industrialization and deforestation, which reduces the amount of earth’s radiation, that escapes to space. Role of these gases to change in climate over a longer period of time is the key issue of climate change. Climate change is a change in climate over time, whether due to natural variability or as a result of human activity (IPCC 2007).

IPCC :The UNEP (United Nations Environment Programme) and WMO (World Meteorological Organization) jointly established IPCC (Inter-governmental Panel on Climate Change) to assess available scientific information on climate change as well as to study its impact during 1988. Since establishment, IPCC has produced five major assessment reports. According to IPCC, climate change is defined as a movement in climate system as a result of internal changes within climate or interaction among its components. Frequency of extreme events (viz. heat waves, intense rain, floods, droughts etc.) are reported to follow increasing trend. Fig.1 is showing natural climatological cycle in the earth throughout different seasons as various components of climate system (IPCC 1996).

Evidence over the past few decades has conclusively established that significant changes in climate are taking place worldwide as a result of enhanced anthropogenic activities. The fast pace of development and industrialization and indiscriminate destruction of natural environment, more so in the last century, have altered the concentration of atmospheric gases that lead to global warming. The major cause for climate change and global warming has been ascribed to the increased levels of greenhouse gases (GHGs) like carbon dioxide (CO₂), methane (CH₄), nitrous oxide (N₂O), chlorofluorocarbons (CFCs) etc. beyond their natural levels due to the uncontrolled activities such as burning of fossil fuels, increased use of refrigerants, and enhanced agricultural related practices.

Pollination is the transfer of pollen from the male part of the plant to the female part of the plant of the same species. The anthers, the male part of the flower, produce pollen. The pollen must be transferred to the upper female part of the flower, the stigma. Here the pollen germinates and grows down the style (the elongated portion of a pistil that connects the ovary with the stigma of a plant) to where fertilization occurs and the seeds develop in the ovaries. A fruit is a ripened ovary.

Introduction

There are both ants and white-ants present in this world since long. Although wrongly called, white ants or termites are responsible for substantial losses due to their infestation or attack not only to agriculturally important crops, but also to buildings and constructions, which in other way creates a hurdle to advancement of civilization. It will be an injustice if the beneficial role of them rendered to the society is remained unmentioned. Their ability to digest cellulose helps these insects recycle the entire base of the nutrient of this earth. But in terms of wastage and destruction, particularly in buildings and constructions, it surpasses the other damages mainly in the sectors like agriculture. In a latest literature, it was estimated that the world suffered an annual loss of 40 billion USD, owing to the attack of termites on various constructions (Liston, 2015).

Introduction

Agricultural insect pests routinely disturb crop production, yet their effects are relatively minor compared to the economic disruption, Suffering, and death caused by medical pests. So, the medical pests compose an extraordinarily important group of insect pests. Insect pests of public health importance had a remarkable impact on human history and this influence still continues (Higley et al., 1989). Diseases carried by insect are prevalent in many parts of the world, particularly the tropical and subtropical countries. These organisms have the capacity to inflict injury, disease, discomfort, or distress. They may cause direct illness and suffering through stings and bites, infested wounds, or allergic reactions. They may feed on blood or body tissues and thus may also transmit deadly pathogens or parasites. Economic losses associated with these pests are borne not only by the affected individuals and their families, but also by human society in general (Higley et al., 1989).

Introduction
 
The relationship between insects and animals is complex. Insects are injurious to animals in myriad ways, whereas a few are beneficial. Some carry deadly disease germs and transfer them mechanically; others serve as necessary hosts of disease germs. Insects injure livestock by several ways like biting, crawling and scratching. Some burrow in the tissues, which become inflamed or are actually destroyed. Many insects are more or less specific to a host while others attack all kinds. Cattle tick, for example, attacks cattle, horses, mules, and sometimes sheep, but it is only to bovines that it transmits cattle tick fever. It is almost impossible to group insects in a list having the same characteristics, habits and methods of injuring livestock. The losses are found due to infection or infestation of ectoparasites on animals. The ectoparasites sucks blood which causes development of anaemia.They irritate the skin of the animals creating itching resultantly loss of hairs/ wools occur. Irritation may also leads to restless that adversely affect the appetite and water intake. Some ticks are responsible to transmit dreadful disease like Red water, Theileriosis, Anaplasmosis etc. Fleas act as intermediate host for some worms eg. Diphylidium caninum.They causes skin diseases like mange, Flea bite dermatitis, and cutaneous myiasis. Loss of body weight in all animals, drop in milk production in milch animals, decrease in meat production, retarded growth of young animals can transmit bacterial, viral, protozoal and rickettsial diseases. They decrease immune response to diseases. They causes annoyance and wry to the animals. The insect bites and blood sucking flies causes direct injury to the animals.

Introduction
 
Safety is one of the first, and most important, things to consider when we decide to apply the pesticides indoors to treat or prevent a pest infestation. If proper safety measures are not followed, the outcome may be harmful or fatal. Perhaps all of us more or less aware about the fact that there is no pesticide which is “absolutely safe” to human or other non target organisms. But we may call some are safer than others.

We usually use pesticide of various kinds in and around our home. We use these products to control insects (insecticides), termites (termiticides), rodents (rodenticides), fungi (fungicides) and microbes (disinfectants).

Introduction

Almost all agricultural commodities include cereals which are stored in go-downs or store on large scale or small scale because storage of food grains is inevitable both in times of deficit and surplus production (Lal, 1985). The intensification of food production has led to several problems in the post-harvest phase including the major concern of pest infestation during storage. The post harvest losses in India have been estimated to be 12 to 16 million metric tonnes of food grains every year (Singh, 2010). The stored grain pests are serious pests of dried, stored, durable agricultural commodities and of many value-added food products and non-food derivatives of agricultural products worldwide.

Introduction

Among vertebrate pests such as birds and wild animals, Well-known rodents include mice, rats, squirrels, dogs, gerbils etc., are great importance. Among rodents, rat and mice come under class Mammalia. They are small mammals belonging to order Rodentia and under sub family Murinae in the Family Muridae. Rat and mice cause severe damage to various crops like sugarcane, rice, maize etc. both directly and indirectly by gnawing, spoilage, contamination and hoarding activities. Beside this, it is big problem in house, store godown, warehouse, urban cities and industries. Rats and mice have caused more human suffering and more economic damage than any other vertebrate pest. It is also known to introduce secondary pest like fleas, mites and ticks into premises cause additional problem.  Statisticians estimate that rats and mice destroy 20 per cent of the world’s food supply every year directly by feeding and indirectly through contamination. It has adapted to nearly all human environments. They live in granaries, fields, city sewers, attics, basements, street trees, on top of 30-story buildings, and inside subway tunnels. Rats may be also responsible for the spread of many diseases. Some of the more important diseases associated with rats are plague, murine typhus fever, rat bite fever, salmonella food poisoning, and trichinosis. Adult mice have a small, triangular head with a small nose and little delicate feet as compared to the body. The mouse ears are very large relative to their heads. Rat ears are smaller relative to their heads. Rats have thicker tails than mice.

Introduction

Insects have a long history through many geological periods. They appeared in the world long before man. Over 750,000 species of true insects have already been described, for centuries man has fought insects as pests, carriers of disease and destroyers of his food. This combat will continue, for humans have never eradicated a single species. Insects such as flies, fleas, lice and mosquitoes directly attack man and domesticated animals. Others attack indirectly by transmitting dangerous diseases to man and animals.

Introduction
 
Natural control strategies that employ biological agents for pest suppression are generally classified as biological control tactics. In conventional usage, this term usually refers to the practice of rearing and releasing natural enemies:   parasites, predators, or pathogens. A slightly broader definition of “bio-control” includes any related management activity that is designed to protect or conserve natural enemies. Biological control is the use of living organisms to maintain pest populations below damaging levels. Natural enemies of arthropods fall into three major categories: predators, parasitoids, and pathogens (Altieri et al., 2005; Mahr et al., 2008).

Introduction

The Indian lac insect, Kerria lacca (Kerr) (family Tachardiidae (Kerriidae), super family Coccoidea of the order Hemiptera) is widely cultivated in India for their products viz., resin, dye and wax.Lac products have diverse uses in food, pharmaceuticals, surface coating, electrical, cosmetic industries, etc. Lac cultivation is one of the major sources of income for the tribal community of the country. India is the global leader in lac production. Out of 2 strains (kusmi and rangeeni) available in lac insects, Kusmi lac insects are specific to India and contribute good quality and quantity lac. Although lac insects can survive on more than 400 host plants, important host plants of lac insects are Butea monosperma (Palas), Schleichera oleosa (Kusum), Ziziphus mauritania (Ber) and Flemingia semialata in India.

Introduction

Lac insects, under Family Tachardiidae (= Lacciferidae), Superfamily Coccoidea, Order Hemiptera are commercially important species for resin, dye and wax production. Lac insects are naturally distributed in tropical and subtropical areas of south and south-east Asia. Out of the nine genera and 99 species of lac insects reported from the world, two genera and 26 species are found in our country. The family Tachardiidae is divided into two sub-families, i) Tachardiinae including true lac insects of resinous cell and ii) Tachardininae including pseudo-lac insects of non-resinous cells. In India, lac is cultivated in Jharkhand, Chhattisgarh and parts of Madhya Pradesh, Maharashtra and West Bengal primarily using Kerria lacca. However, natural populations of Kerria spp are distributed throughout India and K. chinensis in the north eastern states is also cultivated to a certain extent. Kerria lacca species is represented by two distinct forms, kusmi and rangeeni, differing for their host species preference, life cycle pattern, quality and quantity of the resin produced, settlement behaviour, etc. The two forms of the Indian lac insect, commonly referred as ‘strains’ in lac insect literature, were placed as infrasubspecific forms by Varshney (1977).

Introduction

Despite the predominance of attention to insects as pests, many insects are directly beneficial to humans, and as a result, mass-production methods have been developed. The most notable example is silkworms, although many other insects are mass produced for various purposes. For example, Lacewings, ladybird beetles, and some parasitoids are mass produced and sold as biological control agents against various pests. Bumble bees and alfalfa leaf cutting bees are mass produced as pollinators for greenhouse crops and alfalfa seed production, respectively. A major concern in any kind of mass rearing facility is the risk for pest and disease outbreaks. If pest and diseases are not controlled, a sudden collapse of the insect colony can occur and the quality and quantity of their product may be reduced. Sericulture is practiced by scores of farmers in the tropical, subtropical and temperate countries including India, China and other Asian countries. India produces 25,519 metric tonnes of silk and holds second position in the world in silk production (www.csb.nic.in). The Indian silk is comprised of mulberry silk produced by Bombyx mori (Insecta: Lepidoptera: Bombycidae). About 92% of India’s total raw silk production is from the mulberry silkworm. The silk produced by silkworms is known as “Queen of fibers” due to glittering luster, soft-feeling, elegance, durability and tensile properties.