eChapters

Silviculture is the branch of forestry dealing with the establishment, development, care and reproduction of trees. Forestry is anything done in the forest and silviculture is anything done to forests. ‘Silva’ is the Latin word for forest and ‘culture’ for cultivation. Silviculture is narrower than forestry, being concerned only with forest plants, but is often used synonymously with forestry.

The Society of American Foresters defines silviculture as theory and practice of establishment, composition, constitution and growth of forests. Thus, silviculture refers to art and science of raising forest crops, methods of raising tree crops, their growth and aftercare up to the time of final harvesting. In simple words, silviculture is the growing and tending stands of trees. Silviculture is also used to manage forests for wildlife, water, recreation, aesthetics, or any combination of these or other forest uses.

The drones are configured to traverse the field and acquire photos and sensor data in alignment with the predetermined flight plan. High-resolution cameras get visual data, whereas multispectral sensors gather information on light wavelengths beyond the visible spectrum, thereby offering insights into plant health and stress levels.
During drone flights, essential techniques for data acquisition encompass photogrammetry utilizing overlapping high-resolution images, GPS tracking for accurate location data, IMU (Inertial Measurement Unit) sensors for monitoring attitude and movement, ground control points (GCPs) for precise georeferencing, multispectral or hyperspectral imaging for comprehensive spectral analysis, LiDAR scanning for the generation of 3D point clouds, and data logging systems to document sensor readings throughout the flight, all while meticulously planning flight paths and accounting for variables such as lighting and weather conditions.
Drones have emerged as a vital competitive advantage in the inspection of various asset types, optimizing time, reducing costs, and mitigating risk. Historically, an inspection necessitated an inspector to ascend the structure, capturing images and doing measurements manually from considerable heights.
This procedure is intricate; it necessitates extended hours and the presence of numerous experts on site for safety. The data generated by inspectors through manual pictures and measurements is limited: manual inspections may necessitate many trips to collect adequate information for necessary maintenance.
Manually operating a drone to obtain the data necessitates training, expertise, and extensive experience. A pilot collecting data for a tower inspection must comprehend the requirements of the inspectors. The pilot must comprehend how to maneuver an aircraft accurately around an asset to obtain precise aerial photos, regardless of barriers, wind conditions, or the necessity to replace batteries during the trip. The data must be examined and converted into a digital format that is

Introduction

In the 1997 WHO guidance document: “WHO/VSQ/97.01: (A WHO guide to good manufacturing practice (GMP) requirements. Part 1: Standard operating procedures and master formulae)” some basic explanations and instructions were given for preparing various documents required by Good Manufacturing Practice guidelines from WHO and from several regulatory authorities.

GMP guidelines include the requirements for documents (individual), documentation (the systems and formats for documents), and documenting (recording) of production and control activities. Most GMP guidelines provide the same or very similar information as the principles of Good Manufacturing Practice are now international in scope.

In this guidance document, the requirement for master manufacturing instructions and the requirements as given in different GMP documents, different names for these documents and various forms that they can take will be described. This is to guide vaccine manufacturers who are applying for pre-qualification or re-qualification of their product(s) in the preparation or improvement of current documents for manufacturing operations.

1.1 The relation between man and the earth’s resources

The balance between the demand which a community of plants or animals makes on its environment and the ability to satisfy those demands is not the static equilibrium of a laboratory balance with equal weights on either side. It is more like the unstable balancing of a circus acrobat - a series of swings and overcorrections, resulting in an oscillation on either side of the true balance point. Thus a species of wild life increases in number according to the availability of its food supplies, but then goes beyond the optimum number. The natural correcting factors of starvation or migration reduce the population, but there is an overcorrection, and soon the cycle starts again with increasing numbers.

1.1.1 The Malthusian Thesis

In primitive societies the human population also oscillates about a mean as the limiting factors of starvation, disease, and war, maintain an uneasy balance against the natural tendency to increase. A serious imbalance arises when man learns how to modify the limiting factors, but allows the natural increase to go unchecked. The essence of the Malthusian Thesis is that the resulting instability is the inevitable order for mankind. The thesis is named after the English political economist Thomas Malthus who first gave it formal expression in MALTHUS (1966). In an age when significant improvements in health, hygiene, and the standard of living were just becoming possible, Malthus aroused great argument when he pointed out that these very improvements could lead to mi sery through overpopulation. The key point of Malthus’s argument is that population increases in what he called geometric ratio, what today we would call an exponential curve, because whenever there is an increase in population there are more people to produce the next generation, so the rate of population growth accelerates - in modelling terms a positive feedback loop. On the other hand, when we increase food production there is no feed-back loop, the best we can hope for is for a constant linear increase. The natural sequence is therefore for food demand to increase faster than food supply, leading at some point to food shortage.

ABSTRACT

An understanding of the metabolism of heavy metals facilitates biotechnological use of these functions just recently, although heavy metals comprise the major part of the elements in the periodic table. Due to their ability to form complex compounds, some heavy metals are essential trace elements. In any case, essential or not, most heavy metals are toxic at higher concentration. Heavy metal pollution from last few decades has led to an increased environmental concern. Heavy metal like cadmium is a non-essential toxic heavy metal and is also being increased in soil during last few years posing a serious threat to environment and human health worldwide. Therefore, remediation strategies of the contaminated sites are great concerns and can be achieved by a number of different physico-chemical and biological means.

1. Introduction

Spices are a high-value, low-volume commodity traded around the world. Spices have played a significant part in civilisation, exploration, and commerce throughout history. Since ancient times, India has been known as the spice capital of the world, with over a hundred different types of spices grown. India has long been a traditional producer, consumer, and exporter of spices, with nearly every state producing one or more of them. India has a total area under spice production of 39,27,430 ha, which produced 95,99,900 MT in 2017-18. (Spices Board, 2020a). Due to their rich aroma, texture, and flavour, Indian spices are in high demand around the world.

5.1 Introduction

The source of pollution are many and varied. The most critical are domestic sewage and industrial effluent discharging into rivers, lakes, ponds etc. Treatment facilities for domestic sewage in class 1 cities having population of more than 1,00,0000 and class 2 cities having population between 50,000 and 99,999 can process hardly 10% of the wastewater generated. Wastewater treatment facilities are difficult to quantify due to lack of continuous data. On an average, the treatment capacity in class 1 cities can handle only 60% of the wastewater collected and less than 15% of the total volume of wastewater generated.

The Indian industry has grown annually at an average rate of 5.5% during the last 50 years. Among different industrial sectors, water pollution is concentrated with in a few industrial sub-sectors mainly in the form of toxic wastes and organic pollutants. Out of the total pollution contributed by the industrial sub-sectors, 40% to 45% of the total pollutants can be traced to the processing of industrial chemicals and nearly 40% of the total organic pollution to the food products industry alone. Food products and agro-based industries together contribute 65% to 70% of the total industrial wastewater in terms of organic load. Blair T Bower, consultant, the Urban Institute, USA, remarks: "… If substantial further growth of Asia’s cities cannot be avoided and if the environmental disasters that could be associated with that growth are to be prevented, there is only one alternative: urban environmental quality management must be substantially improved throughout the region".

The total quantity of water used by the domestic and industrial sectors is much less than that consumed for irrigation. However, the wastewater released from the above sectors has a great concentration of pollutants, and is discharged at specific disposal points. Thus, the wastewater generated from domestic and industrial projects causes much more water pollution as compared to any other source.

39.1 Introduction

Like all other animals, fish are also subjected to certain diseases. This is one of the most important problems confronting a fish culturist. Diseases at times may take the form of epidemics. The occurrence and magnitude of infections and diseases are closely related to the sanitary conditions prevalent in the water and also the general health of the fish.

14.1 Changes in policy and strategy

14.1.1 Policy changes

In the discussion on land use planning we suggested that the ideal pattern of development is to establish a long-term national or regional policy, which leads to medium-term strategies, and short-term tactical operations. In the real world a curious situation is arising in that the adoption of the new land husbandry approach is growing so fast that the practitioners have moved ahead of the politicians and opinion formers, with the result that the implementation of strategies by Non-Government Organisations, aid agencies, and senior field officers, is helping to shape new policies.

There is always the problem that national policies ought to be long term, but are created by politicians usually working within a short time frame to the next election. Fortunately, the land husbandry approach allows planners at all levels from farmers to governments to appreciate the long-term issues.

The new approach was mentioned in section 9.2.1 in connection with land use planning. It is summed up in the slogan From soil conservation to land husbandry, and two reviews using that title list the main points as the need for:

Conservation has always been one of the most important applications of ecology.Unfortunately, the term “conservation” suggest “hoarding”, as if the idea were simply to ration static supplies so that there would be some left for the future. In the eye of the general public the “conservationist” is too often presumed to be an antisocial person who is against any kind of “development”. What the real conservationist is  against  is unplanned  development  that breaks  ecological  as  well as human laws. The true aim of conservation, is two fold–
    
(1)     To ensure the  preservation of a  quality  environment that considers esthetic and recreational as well as product needs; and  
    
(2)     To ensure as continuous yield of useful plants, animals and materials by establishing a balanced cycle of harvest and renewal.

1.    Introduction
    
2.    Indian Initiatives in Tuna Fishery
    
3.    Tuna Harvesting Techniques
    3.1    Locating tuna
    3.2    Fishing gear and machinery
    3.3    Post harvest catch handling and storage techniques
    
4.    Post Harvest Handling Techniques for the Production of Sashimi Quality Tuna
        
    4.1    Killing and cleaning tools
    4.2    The ten easy steps to sashimi quality tuna
    
Acknowledgements
    
References

Biological conversion methods involve using microorganisms or biological systems to transform organic materials—like biomass and organic waste—into valuable products such as biofuels, biogas, compost, and chemicals. These ecofriendly and sustainable processes contribute significantly to the circular economy by turning waste into useful energy or raw materials. Unlike thermal or chemical methods, biological conversions occur under milder conditions (usually ambient temperature and pressure), which lowers energy consumption and environmental impact. They harness the natural metabolic processes of bacteria, fungi, and other microorganisms to break down the complex organic compounds in biomass
Physicochemical Conversion Of Biomass
Physicochemical methods modify biomass through combined physical and chemical processes. Key techniques include

1. Torrefaction
• Biomass is heated without oxygen at 200°C to 300°C.
• Removes moisture and volatiles, producing biochar or bio-coal.
• Used as fuel for power generation or co-firing with coal.
2. Hydrothermal Conversion
• Utilizes water, high temperature, and pressure to break down biomass.
• Hydrothermal Liquefaction (HTL): Converts biomass into bio-oil, water, and solid residue at 250°C–400°C; bio-oil can be refined into fuels and chemicals.
• Hydrothermal Gasification (HTG): Produces syngas (hydrogen and carbon monoxide) used for power generation or chemical synthesis.
3. Supercritical Fluid Extraction
• Biomass treated with supercritical fluids (e.g., CO?) that behave as both gas and liquid under specific conditions.
• Extracts valuable compounds like essential oils and bioactives.
• Environmentally friendly, with recyclable CO?.
4. Hydrothermal Carbonization (HTC)
• Biomass treated at 180°C to 250°C under high pressure with water, producing hydrochar.

Cleaning, drying, and aeration are essential processes in the management of stored agricultural products to maintain their quality and reduce the risk of spoilage. These practices are particularly important in preventing the growth of molds, the infestation of pests, and the deterioration of the product during storage.
Cleaning is the first step in the storage process. It involves removing any debris, dust, dirt, and residues from both the stored products and storage facilities. Proper cleaning eliminates potential sources of contamination, such as pests, molds, and bacteria, which can thrive in the presence of organic matter. It also ensures that the grain or other stored product is free from contaminants that could affect its quality and marketability.
Drying is equally crucial to prevent moisture-related issues. Excess moisture can lead to mold growth, fungal infections, and insect infestations. Drying reduces the moisture content of the grain or product to safe levels, typically below 14% for grains, which helps preserve their quality during storage.
The drying process can be carried out using natural sunlight or mechanical dryers, depending on the volume of the product and available resources. Properly dried products are less prone to spoilage and can be stored for longer periods. Aeration involves the circulation of air through stored products to maintain optimal temperature and humidity levels. By controlling the environment, aeration helps prevent the buildup of heat and moisture, both of which can lead to product deterioration.
It also reduces the risk of insect infestations by keeping the grain cool and dry. Aeration systems typically use fans or ventilation channels to ensure continuous airflow, especially in large-scale storage facilities. Together, these processes form a comprehensive approach to maintaining the quality and safety of stored agricultural products.

The availability of wide range of pesticides though has been responsible for increasing crop production through regulating arthropod (insect and mite) pest populations in agricultural and horticultural crop production systems but unfortunately, improper and excessive use of pesticides has resulted into a number of potential ecological problems including pest resistance, resurgence, residues in food, feed and fodder, environmental contamination, direct hazards to the users and mainly destruction of beneficial organisms including natural enemies. The most important group of natural enemies is entomophagous insects i.e. insect predators and parasites. Predatory insects are usually much larger than their prey and are generally voracious feeders that kill and eat a wide variety of insects as they grow and reproduce. Many predators are active in both their immature as well as adult stage. Insect parasites/ parasitoids are often tiny, non-stinging wasps. Parasitic wasps are free-living in the adult stage, but in the larval stage are parasitic on specific insects. The parasitic larvae eat their hosts from within, ultimately resulting in the death of the host insect. The compatibility of natural enemies with pesticides is essential as both these management strategies are important part of Integrated Pest Management programs designed to regulate arthropod pest populations and minimize plant damage.

B cell: It is one of the lymphocytes that have antigen-binding antibody molecules on the surface, that comprise the antibody-secreting plasma cells when mature, and that in mammals differentiate in the bone marrow. It is also called B lymphocyte.

B.T.U.: It stands for British thermal unit. The heat required to raise the temperature of one pond of the water through 1oF is called BTU.

Baby back ribs: Meaty pork ribs cut from the lower back rib section.

Bacillary dysentery: It is a food borne illness characterized by very diarrhea and electrolyte loss alongwith intense abdominal pain, high fever and even death.

Bacillus spp: The genus Bacillus is generally aerobic, spore forming. Bacillus cereus also produces 2 types of toxins; a very fast aching emitting toxin which cause vomiting and a diarrhoeal toxin. Bacillus is a genus (Bacillus) of straight rod-shaped gram-positive usually aerobic bacteria producing endospores and including many saprophytes and some parasites produces disease (B. anthracis of anthrax).

Bacitracin: A polypeptide antibiotic isolated from a bacillus (Bacillus subtilis or B. licheniformis) and usually used against gram-positive bacteria.

Back Bacon / Canadianbacon: Bacon cut from the loin that has little fat and is cut into round or oblong slices.

Backward feed evaporator: In this evaporator, fresh feed enters the last and the coldest effect and continues on until the concentrated product leaves the first effect (Plate 54).

Bacon: Bacon is the meat cut from belly portion of hog carcass (a domestic swine esp. when weighing more than 120 pounds or 54 kilograms) and has high percentage of fat. It is cured and smoked.

Introduction Adaptations in animals and birds are countless and extensive, which permit the species better suited in its environment and thus improve chances of survival and propagative success. There are three major categories of adaptations namely anatomical/structural, physiological and behavioural adaptations. Depending on the animal habitats, adaptations can be classified into terrestrial, aquatic and volant (flying). Terrestrial adaptations are exhibited by the organisms inhabiting in land habitats and are again grouped into cursorial, fossorial, arboreal and desert adaptations.

Terrestrial Adaptations

1. Cursorial Adaptations

Cursorial animals are those adapted for running over long distances, often characterized by adaptations that enhance speed and endurance. These adaptations include various skeletal features that optimize their locomotion and overall efficiency while running. These animals have streamlined and spindle-shaped body to minimize resistance in attaining the speed. Here are the key skeletal adaptations in cursorial mammals:

1. Long and Slender Limbs: Cursorial mammals typically have long and slender limbs, which reduce the amount of energy required per stride and increase stride length, thereby enhancing running speed. Lengthening of the limbs in these animals leads to the head placed away from the ground. Hence, as an adaptation to feeding and drinking, the neck and the skull become elongated.

2. Reduced Number of Toes: Many cursorial mammals have reduced the number of toes to streamline the foot and reduce weight. For example, horses typically have a single functional toe (hoof), while cheetahs have reduced and non-retractable claws.

Pomegranate is one of the important fruits of tropical and sub tropical regions. It is also cultivated in semi arid and arid tracts of the country but requires irrigation facilities for better quality of fruits production. Pomegranate is used as fresh and making delicious juice. In India, it is cultivated for domestic consumption and export. Versatile adaptability, hardy nature, less cost in orchard management, low irrigation water requirement as compared to other commercial fruit crops, high yield potential, fine table and therapeutical values and excellent keeping quality has made this fruit more lucrative and remunerative (Sharma et al., 2014).

In global market, India plays a significant role of export of fruits. Recently exports of pomegranate from India have increased and extended to several countries. India stands firmly at third position with 14% market share in pomegranate export after China and Iran.

The annual export of pomegranate fruits from India is about 67, 892 metric tonnes (MT) amounting to revenue of ‘688 crore (Annon, 2019). For export purpose, Phule Arakta, Bhagawa, Super Bhagawa and Mridula varieties are suitable (Anon, 2003).

The highest importer of Indian pomegranate is Gulf countries led by United Arab Emirates (19,000 MT) followed by South East Asian Countries prominently, Bangladesh (10,500 MT) and Nepal (10,000 MT). Among European countries the biggest exporter is Netherlands (4,449 MT) followed by UK (576 MT). Recently, India has also started exporting fresh pomegranate to USA to the tune of 209 MT generating a revenue of 11 crore ((Annon, 2019).

1.1 Introduction Millets are one of the world’s earliest food grains, arguably the first cereal grain utilized for household uses. It has been a cherished crop in India for ages and constitutes a staple food for over one-third of the world’s population. Recently ICAR has designated millets as “Shree Anna”. Several types of small-seeded cereals are grouped together as small millets. These crops offer a reliable and affordable harvest from the regions where the primary cereals fail to produce a sustainable yield. Small millets are insignificant in terms of food production, but they are vital as staple foods in their particular ecosystems. Small millets are more than just finger millet (Eleusine coracana) and include kodo millet (Paspalum scrobiculatum L.), little millet (Panicum sumatrense), foxtail millet (Setaria italica L.), proso millet (Panicum miliaceum L.) and barnyard millet (Echinochloa frumentaceae). The rest of the two small millets namely, fonio millet (Digitaria exilis) and teff (Eragrostis tef) are of local significance in Africa. Small millets have a high nutritional value, but also their demand has deteriorated due to a lack of standard processing techniques to compete with fine cereals. Small millets have a huge potential to satisfy our nutritional needs, therefore we must push ourselves and make efforts to enhance its utilization by incorporating them into our daily diet.

Droughts are intricate and multifaceted phenomena that can have far-reaching impacts on the environment, economy, and society. The complexity of droughts arises from the interplay of various factors, including climate variability, water availability, land use, and human activities. Given the varying characteristics and consequences of droughts, classification becomes a crucial step in understanding and managing these events. By categorizing droughts based on their severity, duration, and impact, researchers and policymakers can better grasp the intricacies of drought dynamics and develop targeted strategies for mitigation and adaptation. The classification of droughts is necessary for several reasons

Peach (Prunus persica L. Batsch) belongs to the Prunoideae subfamily of the Rosaceae with other species collectively referred to as “stone fruits. Unusual in its subgenus, the peach is largely self fertile. There are at least 77 wild species of Prunus and most of them are found in Central Asia. Peaches include different types of varieties downy skin with freestone or clingstone (peach), smooth skin with freestone or clingstone (nectarine) (Bretaudeau and Faure, 1991). It is considered as favourite table fruit and highly valued for its taste, flavour and attractive colour. The fruits are rich source of sugars, vitamins and minerals and malic acid (1.2%). Peach fruit shapes vary from round to flat, beaked, skin colors vary from white to red or yellow, the flesh color white or yellow melting or non-melting types and it can be clingstone or freestone. Regions with warm to hot summers are produces highest quality peaches. It has a range of uses as fresh fruit for table purpose as well as processed product especially in sauces, slice production and canning. Peaches are highly ruminative and nutritionally rich crops for mild temperate to subtropical regions. Peaches are excellent sources of fiber, vitamins and antioxidants. The carbohydrates, organic acids, minerals and dietary fiber are among the major constituents of peaches, which contribute to the nutritional quality of both fresh fruits and the juices (Manzoor et al., 2012).