eChapters

Introduction

In India, the history of agriculture dates embarrassed to Indus natural depression Civilization Era and even before that in some locations of Southern India. Today, India ranks more familiarized in surface area output. Agriculture and related sectors like biology and fisheries accounted for 137% of the value concerning 500^th of the manpower in 2013. The livelihood buildup of agriculture to India’s value is steady breakdown with the country’s broad-based livelihood growth. Still, agriculture is demographically the broadest and highest livelihood across and plays a strong role within the all-inclusive socioeconomic attachment of India. India exported $38 billion service of scientific discipline on-line symbols, authentic it the seventh larger scientific discipline business person used to and therefore the sixth larger web businessperson, plenty of its agriculture exports serve developing and developed nations as in 2013. Indian agricultural/horticultural foods squarely determined and exported to further more than 120 countries, primarily within the geographical area, environmental region, SAARC countries, the EU and United States. As per FAO (2010), agriculture statistics India is that the world’s larger agent of in great quantity of fruits and vegetables, milk, spices, base crops that as jute, staples as millets and vegetable oil seed. India is that the further larger agent of wheat and rice in the world.

India stratified within the world’s five larger producers of over 80^th of scientific order ending things, as well as in large numbers banker’s invoice crops feels affection for unusual crops including cotton, in 2010. India is one in every of the world’s five larger producers of farm animal including dairy products and plenty of meat, with one in every of the quickest advanced rates, as of 2011.

Introduction

Food safety and quality are the prime concerns in a global food supply chain. With the globalisation and advancement in the technologies, the global agricultural system transformed to a stage where food standards and international trade work hand-in-hand to promote food safety. The key drivers for this change in food regulations include digital technologies, novel food processing technologies, product labelling, marketing trends, e-commerce, etc. International trade in food sector is governed by the agreement on the application of Sanitary and PhytoSanitary Measures (SPS) and Technical Barriers to Trade (TBT). The agreements allow member nations to impose all measures or standards to protect human, animal, plant life and health, harmonize with the international standards, environmental protection, protection of consumers against deceptive practices and prevention of unjustifiable barriers to international trade.

In general, the developing countries have negligible contribution in the international trade. There are instances where the quality attributes of the commodities do not meet the required parameters as envisaged by the international market. Various issues associated with the product rejection on the basis of food safety and health standards are a matter of concern today rather than before. Hence, United Nations FAO and WTO urged the active involvement of the developing countries in the food standard setting processes in Codex Alimentarius as well as in SPS and TBT Committees. This will ensure harmonisation of food quality standards and traceability for rapid response to food borne disease outbreaks. Governments and local authorities shall intervene in the market place in setting technical regulations; and sanitary and phytosanitary measures which in turn will encourage the food processing companies around the world to implement food safety management systems to ensure the production and distribution of safe foods.

ABSTRACT

Nowadays it is very important to evaluate research publications. They are evaluated by impact factors and citation indices. The research value of an author and journal is ascertained from several citation indices, from which it is known that what Impact of a research publication is in market. The h index is based on diagnostic importance or productivity so it confers a delegate index of scientific result. The h-index is used to measure of published work of a scientist or scholar as well as also assess the achievement of research groups. The present paper describe about the h-index. Specifically, it explains its origin, advantages, and disadvantages and how calculates individual’s h-index in different databases.

Keywords: Citation, Impact, H-Index, Research productivity, Scientific publications.

It is crucial to understand that our entire health and wellbeing depends centrally on our mental health. A broad spectrum of mental health issues that impact our mood, thoughts and behaviours may lead to stress, sadness, anxiety inappropriate eating disorders, addictive behaviours and many more. People occasionally face mental health issues, but when persistent symptoms impair functioning and cause regular stress, a mental health concern turns into a mental disease. It also affects how we respond to people, deal with stress and make decisions.
From infancy to adolescence mental health is very crucial for healthy development as it lays the foundation for development of positive social, emotional, cognitive and communication skills and behaviours in young people and that boost the mental health and wellbeing in later life.
Why Is Mental Wellbeing Important?
According to estimates from the World Health Organization, 20% of young people suffer from mental problems and the incidence are growing faster (World Health Organization). Greater numbers signify a greater effect and are more serious. Globally, mental, behavioral and neurological disorders are predicted to account for nearly 15% of disability-adjusted life years by 2030; number of years that an individual was “lost” to living with the aftereffects of a certain disease or lived with a handicap. However, the prevalence pattern varies among high, middle and low-income countries (Prince et al., 2007).

I. INTRODUCTION

Procedural remedies for the infringement of one’s right are not enough by themselves unless they result in some reliefs of substantive nature whereby it can reasonably be said that these reliefs, temporary or permanent, as the case may be, are enough in the circumstance to make good or, say, compensate the genuine loss of the aggrieved party to an infringement suit. The substantive remedies available to a successful plaintiff at any stage in any suit for patent infringement could, however, be derived from the express as well as by necessary implication of the provisions of the Patents Act, 1970 dealing with the “Reliefs in suit for infringement”. Its Sec. 108 declares in terms quoted below:

On August 6, 1945, the most dreadful among the weapons of mass destruction – the atom bomb – was dropped in the civilian area of Hiroshima. Three days later, another atom bomb was dropped in Nagasaki. In July 1955, Bertrand Russell and Albert Einstein issued their famous manifesto seeking the abolition of nuclear weapons and appealing to all inhabitants of Planet Earth:
 
Remember your humanity, and forget the rest. If you can do so, the way is open to a new Paradise; if you cannot, there lies before you the risk of universal death.

In 1957, the Russell-Einstein Manifesto led to the birth of the Pugwash Conferences on Science and World Affairs, an organisation devoted to the causes of ending the nuclear peril and reminding scientists of their ethical responsibility for the consequences of their discoveries, particularly in the area of nuclear threat to human survival.

The Late Dr. APJ Abdul Kalam is described as a great patriot, visionary leader and the 11th President of India ( 2002 – 2007 ). The country would have celebrated his 84th birth day on 15th October 2015. To many like me, he was the most ideal role model that the youth of India needed, in recent time. He emerged as a complete human-being who touched the lives of people. My first meeting with himwas when he visited IPCL in eighties - as the DRDO Chief to discuss about Carbon Fiber and Composites. I was heading GSFC’s R & D Centre and other facilities like engineering plastic Nylon – 6 and their Composites and hence was invited to join the discussions. That interaction left a strong impression in my mind. Later when I became Vice Chancellor of Gujarat Agricultural University, I had many more opportunities to meet him and was often surprised at his deep rooted interest and knowledge in every sphere of Science & Technology. Subsequently, to my delight, I received an invitationfrom his office on the eve of 26th January evening - at home with the President and later was given more time for a one-to-one meeting the next day. Walking across the corridors of the Rashtrapathi Bhavan, the atmosphere looked rather formal and uneasy for me, but, as I was ushered into his room, I saw Dr. Kalam wearing his favourite blue shirt and smiling. He moved forward and greeted me with the same friendliness and warmth. As we started talking about Agriculture scenario, the work I was planning and the future prospects, I marveled at his understanding and insight and left the room truly inspired. Later, I was fortunate to have many more meetings and interactions with him. In fact, during myfrequent visits to Delhi as the Chairman of National Agri Technology – nrdc, I would call at his residence in the evenings at Rajaji Marg to discuss different developments and get his guidance. It soon became clear to his efficient Secretaries to inform me in advance and arrange a meeting with him whenever he would visit Anand or Vadodara. In one such meeting at theCircuit House in Vadodara, I took my 8 year old Grand Daughteralongwith me. He enquired briefly about the progress in my work in Bio Technology and Agriculture in the first 2 minutes but later turned his entire attention to the little girl. It was amazing the way he interacted and talked with much love and

The Late Dr. APJ Abdul Kalam is described as a great patriot, visionary leader and the 11th President of India ( 2002 – 2007 ). The country would have celebrated his 84th birth day on 15th October 2015. To many like me, he was the most ideal role model that the youth of India needed, in recent time. He emerged as a complete human-being who touched the lives of people.

My first meeting with him was when he visited IPCL in eighties - as the DRDO Chief to discuss about Carbon Fiber and Composites. I was heading GSFC’s R&D Centre and other facilities like engineering plastic Nylon – 6 and their Composites and hence was invited to join the discussions. That interaction left a strong impression in my mind. Later when I became Vice Chancellor of Gujarat Agricultural University, I had many more opportunities to meet him and was often surprised at his deep rooted interest and knowledge in every sphere of Science & Technology. Subsequently, to my delight, I received an invitation from his office on the eve of 26th January evening - at home with the President and later was given more time for a one-to-one meeting the next day. Walking across the corridors of the Rashtrapathi Bhavan, the atmosphere looked rather formal and uneasy for me, but, as I was ushered into his room, I saw Dr. Kalam wearing his favourite blue shirt and smiling. He moved forward and greeted me with the same friendliness and warmth. As we started talking about Agriculture scenario, the work I was planning and the future prospects, I marveled at his understanding and insight and left the room truly inspired. 

“Where is your Dhoti, Dr. Mehta ?” Dr. Varghese Kurien surprised me as I entered his office at IRMA (Institute of Rural Management Anand). That was April 2000, soon after I had taken over as the Vice Chancellor of the erstwhile Gujarat Agricultural University (GAU) and had decided to call on him during my visit to the Anand Campus. (At that time GAU was the largest University in Asia with four main campuses – Dantiwada, Anand, Junagadh and Navsari and about 65 experimental farms / stations spreaded all over). Earlier, I did have some interactions with Dr. Kurien. When at GSFC Ltd., we had introduced Nylon – 6 Engineering plastic. I had discussed with my team of Research and Application Development Engineers about multi layer packaging of dairy products where Nylon – 6 can have a good market potential which we used to discuss with Amul. Also, our work on Bio Fertilizers and Bio Pesticides had indirect interest to them. So, when suddenly I was offered the position of Vice Chancellor of GAU and was in a dilemma, I went for his advice. After all, he had held the same position earlier (in addition to AMUL). I explained about the offer and said that I was not too sure about accepting it. He, on the contrary, encouraged me to accept it saying “you can do a lot !” I just murmured,” But I am not an agriculture graduate. I am a Chemical Engineer!” To which he jokingly said – “So ?. I am a Metallurgical Engineer. And now I am a Dudhwala!”

"Where is your Dhoti, Dr. Mehta ?” Dr. Varghese Kurien surprised me as I entered his office at IRMA (Institute of Rural Management Anand). That was April 2000, soon after I had taken over as the Vice Chancellor of the erstwhile Gujarat Agricultural University (GAU) and had decided to call on him during my visit to the Anand Campus. (At that time GAU was the largest University in the Asia with four main campuses – Dantiwada, Anand, Junagadh and Navsari and about 65 experimental farms / stations spreaded all over).

Introduction
In the ever-evolving landscape of agricultural extension education, the need for dynamic and interactive training approaches has become paramount. Traditional training methods often focus heavily on theoretical content with minimal engagement. To bridge this gap, EEI Hyderabad has adopted a scientific and structured approach to training delivery. This initiative focuses on digital integration, experiential learning, and robust evaluation techniques to enhance knowledge retention and practical application among participants.
About the Technologies Addressed
The initiative leverages various digital tools and scientific models to enhance training effectiveness. These include:
• Online tools (13 stages): Used for participant registration, need assessment, evaluation, and feedback collection.
• David Kolb’s Experiential Learning Cycle: Ensuring hands-on learning through experience, reflection, conceptualization, and application.
• Kirkpatrick Model of Training Evaluation: A four-level approach to measuring training effectiveness through reaction, learning, behavior, and results.
• Simulation Exercises and Management Games: Enhancing decisionmaking skills and real-world problem-solving.
• Quizzes and Role Plays: Encouraging active participation and knowledge reinforcement.
• Fishbowl Technique and Focused Group Discussion: Facilitating peerto- peer learning and critical thinking.

Abstract

The Indian Peninsula in general and its southern part in particular has been thought to be a stable shield area and hence inert to younger earth movements and seismicities. However, in addition to fast relapsing seismicities, the studies carried out by earlier workers during the past three decades indicate possible pulsatory tectonism, at least since the Jurassics. The present study is a newer attempt to identify, analyse, and spatially amalgamate a large number of anomalies visibly displayed by the tectonic, fluvial, coastal, and hydrological systems in remote sensing and ground based datasets/observations, and to finally paint a fair picture on the active tectonic scenario of South India. The study reveals that the phenomena, viz. extensive soil erosion, reservoir siltation, sediment dump into the ocean, preferential migration of rivers, restricted marine regression, shrinkage of back waters, withdrawal of creeks, fall of groundwater table, etc., indicate two E–W trending ongoing tectonic (Cymatogenic) archings along Mangalore–Chennai in the north and Cochin–Ramanathapuram in the south. Intervening these two arches, a cymatogenic deep along Ponnani–Palghat–Manamelkudi exhibiting phenomena opposite to the above is observed. In addition, the characteristic tectonic, geomorphic, and hydrological anomalies observed in 1B satellite FCC data, as well as in the field, indicate N–S trending extensional, NE–SW sinistral, and NW–SE dextral strike slip faults. These anomalies and the tectonic features deduced there upon, indicate that the southern part of the Indian Peninsula is tectonically active due to the northerly to north– north-easterly directed compressive force related to post collision tectonics. This active tectonic model visualized for South India gives a further clue that the whole Indian plate is whirling like a worm with alternate E–W arching and deepening, along with block and transform faulting from Cape Comorin in the south to the Himalayas in the north.

Introduction

The Indian Peninsular Shield in general and its southern part in particular has always been thought of as being inert to younger earth movements and related seismicities / earthquakes. For this reason, geoscientists have not shown much interest in studying the Neo-active-seismotectonics of the southern part of the Indian Peninsula, mostly restricting themselves to the western (Kutch) and central (Son-Narmada) parts of India (Auden 1949, West 1962, Choubey 1970, Biswas and Deshpande 1973, Kailasam 1975, Ghosh 1976, Pal and Bhimashankaran 1976, Crawford 1978, Dessai and Peshwa 1978, Sharma 1978, Guha and Padale 1981, Kaila et al., 1981, 1985, Murty and Mishra 1981, Powar 1981, 1993, Bhagwandas and Patel 1984, Bakliwal and Ramasamy 1987, Merh 1987, Ravishankar 1987, Amalkar 1988, Ramasamy et al. 1991, Gupta 1992, Sareen et al. 1993, Ramasamy 1995a, 1998, and many others).

Remote sensing provides large-scale information about crops and agricultural environments through satellite, aerial and other sensing technologies. This chapter examines the integration of remote sensing and artificial intelligence for crop monitoring and yield prediction. It introduces the fundamentals of agricultural remote sensing, important sensors and data types, vegetation indices and crop health assessment. Data acquisition and preprocessing are followed by applications of AI models for monitoring crop conditions and predicting yields. Remote sensing datasets can be combined with machine learning and other AI techniques to identify patterns associated with crop performance. The chapter also discusses case studies, limitations, emerging technologies and future research opportunities in intelligent crop monitoring and yield forecasting

Abstract

The Remote Sensing and the followed up field based investigations show that the Tamil Nadu coast, India, is facing series of geoenvironmental problems due to tectonic movements and morphodynamic processes. Such problems pose a challenge to the engineering geologists. The paper discusses such challenging engineering geological problems and plausible remedial measures.

1. Introduction

Plant diversity is vital for the survival and well-being of humanity. A number of domesticated plant species are critical to food security. In addition to the cultivated species, many wild plants also play an important role in meeting local needs for food, fuel, medicine and construction materials; crop wild relatives are also of special interest for crop breeding programmes. There are currently hundreds of underutilized plant species and varieties displaying traits of interest to meet present and future needs, while the value of many other plant species is yet to be discovered (Stohlgren et al. 1997). Researchers have confirmed the importance of the contributions and interdisciplinary understanding in relation to taxonomy, physiology, reproductive biology, conservation biology, hydrology, soils, as well as socioeconomic and climate change for holistic understanding of biodiversity patterns (Dale 1999; Myers et al. 2000). It is thus necessary that the professionals studying plant diversity require a synoptic view on the regulators of biodiversity and the tools through which the processes could be understood.

Spatial analysis can contribute significantly for improved understanding and monitoring of plant diversity. Results obtained from spatial analysis make it possible to formulate and implement targeted conservation strategies, which can be more effective (Escudero et al. 2003; Dale 1999). Outputs from spatial studies can provide critical information like evaluation of the current status of plant species and prioritize areas for conservation on the plant diversity, in particular geographic region. Spatial information, combined with available characterization and/or evaluation data, is very useful for effective genebank management (e.g. definition of core collections, identification of collection gaps, etc.). This type of analysis is conducted using Geographic Information System (GIS) tools, which allows one to carry out complex analyses combining different (spatial) data sources and generate maps, to facilitate the development and implementation of conservation policies (Goodchild 1992; Crosetto et al. 2000; McCarthy 2001).

Abstract

The ever increasing population in India and the world, impeding threats from the climate change scenario and the increasing demand for land resources from the industrial sector calls for improved resource efficiency. The production strategies are changing from input intensive to integrated resource management strategies. The shift is towards adopting the precision farming technologies like addressing the site specific variability and crop needs. Remote sensing technology coupled with GIS has been recognized as reliable tool in agriculture to guide application of fertilizer, pesticides and other farm inputs. With precision farming, technologies such as grid soil sampling, remote sensing, on- the-go sensing, and electronic yield monitoring help farmers gather very detailed information about the heterogeneous makeup of a farm field. Site specific applications means application of required input only where it is required rather than entire fields or adjusting application rates accordingly. This chapter discussed the input management based on the time of intervention - Input management prior to crop sowing, in season crop management and end of the season.

Keywords : Management zones, soil variability and Remote Sensing

Introduction

Remote sensing is the science and art of obtaining information about an object, area or phenomenon through an analysis of the data acquired by a device which is not in contact with the object, area or phenomenon under investigation. The definition of remote sensing is restricted to mean the process of acquiring information about any object without physically contacting it in anyway regardless of whether the observer is immediately adjacent to the object or millions of miles away. It is further required that such sensing may be achieved in the absence of any matter in the intervening space between the object and the observer. Consequently, the information about the object, area or any phenomenon must be available in a form that can be impressed on a carrier vacuum.

Remote sensing and Geographic Information Systems provide spatial information for monitoring crops, land, soil and water resources. This chapter introduces their fundamental principles and explains developments involving satellites, UAVs, hyperspectral sensors, thermal imaging and cloud-based geospatial platforms. Analytical techniques include vegetation indices, time-series analysis, spatial modelling and artificial intelligence. Applications cover crop-health monitoring, yield forecasting, irrigation planning, drought assessment, pest and disease identification and soil-resource management. Integration with IoT, automation and other digital technologies improves the timeliness and resolution of agricultural information. These tools support evidence-based decisions responding to food-security, climate-change and natural-resource sustainability challenges.

Abstract

The development index and the developmental planning of a Country/Nation mostly depend on its natural resources potential including water resources. The fast emerging Remote Sensing and GIS technology has substantially reduced the problems of water resources management including groundwater. The groundwater is distinctly controlled by western crystallines, central Tertiary sandstone and eastern Quaternary sediments in Pudukkottai district. While the groundwater behavior in crystallines is dominantly controlled by secondary porosity, in Tertiary formations and Quaternary sediments, it is controlled primarily by the primary porosity and by secondary porosities also if these are structurally deformed.